Creative Inspire 6.1 6600 Sound Problem

I have a Creative Audigy Audio Processor (WDM) (Audigy 2) and the speakers are Creative Inspire 6.1 6600. The sound goes down when the selector of volumen is between 3 and 4. I need to increase the volume to make it sound again, but it goes down again. What`s going on?

Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

Similar Messages

Creative Inspire 4.1 4400 Sound problem.

The volume of the speaker system tends to increase and then decreases with slightest touch of the volume control unit. At other times the volume would jump/change on it's own. I tried disconnecting the speakers and reconnecting my old set of 2-way pc speakers and they work perfectly, thereafter i reconnected the creative speakers but the problem is still there. Does anyone know what the problem could be. I am not a technical person, I just want my speakers to work fine. If it helps my PC system specs are : 1.7 ghz celeron
Gigabyte P4 Titan 845PE M/board
256 MB Ram
Avance AC '97(6 channel) Onboard
ATi Radeon 9200 28 MB
Windows XP Home

Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

Inspire 6.1 6600 Sound

Hi,
Recently i have bought creative inspire 6.1 6600 speaker set....
I have ASROCK P4i45GV motherboard......And it has built-in sound card....When i connect the speaker set to my PC i am able to connect 4 speakers and Sub woofer too. I am able to hear the sound from all the 4 speakers and that sound will be same in all 4 speakers..(It will not be different in each speaker) Remaining two speakers i am not using ....Right now i am not planning to buy any sound card ..
when i keep the bass full and increase the volume, after half stage the sound starts shaking...Meaning i wont be able to hear the complete sound...
According to me there should not be any problem with the sound even i keep both bass and volume high .But the same is not happening with my inspire 6600......
So whats the problem?Do you think any problem with the particular set...........
Moderator plz help me in this regard.
Thanks In Advance
Rudra

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

Creative inspire 6.1 6600

Hello Creative Staff,
I need help with a very delicate situation.
I have bought the Creative Inspire 6.1 6600 from my dad in
Europe and i guess that problem just starts off then. It runs with 230V ~ 50Hz 39mA and the AC adaptor is 3.5V ~5A 67.5VA
I'm not a technician, but i know enough that i need to get a power tramsformer;
but the problem is what kind of trnsformer do i need in order to make things work
right the first time?
can anyone help me with this one?
P.S I also bought the USB Sound Blaster Live! 24 bit. just to let you guys know.
Message Edited by thm_05 on 03-03-2005 11:32 PM
Message Edited by thm_05 on 03-03-2005 11:38 PM

thm_05,
If you need a transformer to use a power supply from a different country, you'd really need to speak to an electrical store in your area to see if they can supply you with one. We don't make or supply any of these.
Cat

Creative Inspire 6.1 6600 Speakers

I have Creative Inspire 6.1 6600 speakers. The "Wired Volume / Base Control with Power Switch and Headphone Jack" is malfunctioning. In fact, when I turn the volume control on, the green LED on top does not illuminate. And because of this bad control, I do not have sound. Can anyone tell me how and where I can replace this control? Your assistance is appreciated. Thanks very much.
Charles

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative Inspire T6100 - I got a problem, pls help me!

I just bought a creative Inspire T6100 system, but I got a strange problem.
I can hear just from the rear left and center speakers, all the others are muted. Every wire is perfectly connected to my phase 22 with 3 jack connectors. I tried to disable the basic soundblaster in the motherboard(I got an asus P5K), but it's the same... nothing changed...
Can someone help me pls?

Hi Freddy I read your problem , here I have a solution for you . If you are using your motherboards existing inbuilt sound card then you arerequired to check the balance level. to check balance level. to check the balance you please click on start > control pannel > then click on " sound & audio devices"? In this menu click on " Advance" here you will found balance level of both master volume & wave . checkbalance sould be at center level. secondly go into your cards application software and select 5.1 or 6.1 speakers,to check the sound take a headphone and attach each output of sound card if sound is coming both channels then it meanssound card is ok. Check your T6060 speakers audio leads should be fully Inserted into sound cards socket. If your are using creative sound card then set it to factory default setting and check the problem will be automaticaly solved. Creative T6060 speakers are 5.1 speakers & it requires proper sound card . It is recomended to install creative Sound blaster5.1 or Creative Audigy Value sound card for exelent performance. Harjinder KlerCyberstar Infocom LtdChandigarh

Creative Inspire 6.1 6600 Controller

Hey there, i wasnt sure where to ask this question, so i do appologise in advance.
Recently, my speakers start encountering problems, and finally the sound completely stopped working - and this was due to the volume controller (I own the Creative Inpsire 6.1 6600).
As i know i wont get warranty, nor do i intend to try and recieve it as i've had these speakers for a fair long time and dont have any receipts etc. I was just wondering if anyone on the forums have the remote spare, or do you have any tips and tricks that might help? Ive opened it and made sure it was cliking and the swtich was hiting the and connecting properly inside.
I have searched online numerous times for second hand controllers, but have had no luck.
Thank you very much.
Todd

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Inspire 5.1 P5800 Sound problem...

Hello Everyone
I have a Sound problem with my 5.1 speaker system. When I turn it on,(playing music or not)I hear a terrible loud/high background noise, like a constant interferance. It's a very unpleasant sound. The noise come from all satelites speaker(Speacially the center speaker.)
I'm sure that all conections is ok.
Please help me to solve this problem.
PD.: If it's help I have a Compaq Presario SR602LS Desktop PC.

1 Identify which component causes it; plug headphones to your computer to see if that has noise, try all three connections. Then, connect all speaker inputs to a different source, like a mp3-player.
2 If both are noise-free, it has to be some kind of interference. The cables to the satellites are coaxial so they are not likely to be the cause, but the 3,5mm jacks to the sub might be. To find out if they are, try moving your sub around your room to see if the noise changes (both decrease or increase).
3 If the problem cannot be traced to either or 2, it might be a groundloop: that the signal fed from, for instance, your computer, to the ground connection of your electricity-plug is picked up by your speaker set. To check this, try connecting your set to a different electrical group or at least a different plug.
In case 1: if it's the pc, try grounding it if it's not already. If it's the speakerset it will not be so easy to solve.
In case 2: see if you can connect the sub to your pc using coaxial wires (or perhaps even optical, I am not familiar with the set), you might need some 3,5mm-to-RCA-plugs for that, or if you can somehow shield the inputcables by wrapping it in aluminum-foil or anything.

Inspire 5.1 5300 sound problem

Hello,
My Inspire sound system was working very well until now. Now when i power up i get a constatnt hum on the speakers. This hum is even when the incoming cable from the sound card is disconnected. The lamp of the volume regulator comes on when it is turned - so i assume no fuse is blown. Can anybody help me about this problem.
Regards
lalisund

Hi, I have the very same problem with my creative 4.1 speakers. A loud hum begins the moment i start it. Strangely enough it sometimes plays, and sometimes just plays for about 20-30 sec before it goes back to the hum.
If you have found the source of the problem, please let me know too... am pretty bugged with this.
Anyone else who can shed some light on this issue?

Please Help! Creative Inspire 6.1 6600

i've had this speaker system for quite some time, but now my subwoofer doesn't work. i've done the noise/channel test through thx and creative and they both give me the same results. all 6 speakers work, but the subwoofer doesn't. so i attempted in the callibration. all went good until the bass/subwoofer section, the sound went jumpy and squeled so loudly. i've checked all wires, but still no results. still doesn't work.
if this could relate to the sound card, well the current sound card i'm using is SB Audigy 2 ZS.
thx for ur help

fungry
Just a piece of advice.. Never buy creative speakers. I have 2 friends who had their creative speakers damaged in month. And my 6.1 6600 damaged in 6 months time, (I didn't use it for 3 months in the middle). In my case, the speakers start to produce weird sound, and sometimes there's signal going through, sometimes there no signal.
Creative produce good sound cards, but not speakers.. although I do have a lil problem with the soundcard at the moment for the crackle,pop sound during playback of songs when computer is under high load, but i believed it can be fixed with a new driver/software.
I would recommend you Logitect speakers.(logitech has strong bass) some people prefer altec lansing because it has has clear/crisp sound but I think that's only higher treble that's all.
You can have very clear voice on the logitech too just by adjusting the treble level on your audigy2 zs.
I am now using Logitech z5300e and its heaps stronger than 6.1 6600. I would say 6600 is a failure, there isn't much power.. weak sound..you can't enjoy music or movie with that set of speakers
Since you have a good soundcard, I would think that you do enjoy good quality music and movie. To achieve that, I think you would need to change your speakers. Go for z5300 or If you just got that extra money, get Logitech Z5500..
Well, That's just my advice. Good Luck
Sam
Message Edited by samueltai on 06-11-2005 03:01 AM

Inspire(M5300) 5.1 sound problems

Hi all,
Recently I have bought a new creative 5.1 inspire(M5300) speakers, but have got poor sound clarity. The volume is also very low. I didn't get a high volume with this 5.1. I am getting the the same 2.1 volume with this new speakers.
Is there any chance for me to increase the speaker sound and sound clarity?
I am expecting a good answers.
Thanks in advance
Regards
Mahesh.

Hi Mahesh Inspire 5.1 5300 is one of good speakers. It is 5.1 Dolby concept sepeakres. there is no comparison with 2.1 speakrs. first of allif your are using these speakrs with your existing motherboard's sound card then you cannot get full performance of these speakers.to get full melodius sound effect you please install creative sound card Sound blaster 5.1 or Creative Audigy Value 7.1 ( Recomended) To get good sound effect pls do following 1. Place your subwoofer at the floor not at table top. 2. Adjust bass level at normal level as indicated in its knob.( Center Level) 3. Do not set Bass level at full level. 4. Place all speakres as showen in cataloge available with speakrs. 5. Adjust Graphic equilize or bass trebel in sound card ( if creative sound card installed)

Creative inspire 5.1 5200 speaker problem

I just bought these speakers and the center speaker gives me static i tried switching the sound card and i still got static i dont know if they are broken or if im doing something wrong

Try a set of headphones on the same output on the soundcard. If you hear static then, it's something on the card or PC that's causing it. If the sound is fine then, it must be something in the speakers.
Double-check the cable isn't damaged, it may be that it's faulty. Otherwise it's possible the center speaker itself (or the output on the sub) is broken. Contact Customer Support for assistance in that case.
Cat

Static Creative Inspire 6.1 6600

Recently, within the past month and a half to two months, my speakers have started to make a static noise. At first, it was occasional and it would go away after I turned my speakers off over night. However, recently ever since I have moved the static has increased. My cell phone would cause interference with my speakers, but it would never make static noises when my cell phone wasn't going off. However, it started before I moved and it has only increased. Is there anything I can do to stop this static?

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

Creative Inspire t7900 side, back center problem

My side speakers, back speakers and the center speaker give no sound. But when I test the speakers I can hear sound from front left,right,sub and also center. I Cant hear both side speakers and the two at the back. I can hear sound from the sub when I test the back speakers(not a sub sound a speaker sound comes out of the sub) help please
My old 5.1 speakers working fine

You might want to follow the instructions in this knowledge base article to check if the speakers are working properly. Click on Speaker and Headphones -> Testing Speaker Systems with a Portable Device.
This should help you narrow down which device is working properly, the sound card or the speakers. I won't be able to comment on the AD988B 7.1 high definition audio device because this is a third-party product. You should seek help from the respective company if you need help on troubleshooting the audio device.

Creative Inspire 6.1 6600 Sound Problem

Similar Messages

Maybe you are looking for