Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

Hello,
I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
Any help would be appreciated,
Chris.

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Similar Messages

After installing windows 7 on my hp pavilion dv4000, the audio and vga caase to work. help me

after installing windows 7 on my hp pavilion dv4000, the audio and vga case to work. help me with a recommended sound and audio drivers for windows 7 operational system. Please
This question was solved.
View Solution.

Hi:
Please click on the devices in the device manager. Then click on the details tab. In the properties drop down list, select the second item (Hardware ID's). Post the top string of characters you see for each device.
Those will identify the model devices you have and I can try and find the drivers for them. Is it Windows 7 32 or 64 bit you have installed?
Paul

People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4

Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
Message Edited by big7george on 05-3-2007 04:24 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Creative Inspire 4.1 4400 speakers

Hi, I just bought a new set of creative inspire 4.1 4400 speakers. I haven't got a 5.1 sound card. Can I just use it as a 2.1 instead, i.e. don't connect the other 2 rear speakers?

Yup, that will work fine. Make sure you unplug the input at the speakers too (so only one input lead is connected).
You could also use a 3.5mm headphone splitter at the pc side so the front sounds come from the rear too (and put the rear speakers next to the front speakers?).

Replacement Wired Remote Creative Inspire P5800

Does anyone know whether you can buy a replacement wired remote from a Creative Inspire P5800? I've spent all morning going in circles on their website. The headphone socket is defective on mine, and I don't really want to buy a whole new system if I can help it.

Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

Creative Inspire 6.1 6600 Speakers

I have Creative Inspire 6.1 6600 speakers. The "Wired Volume / Base Control with Power Switch and Headphone Jack" is malfunctioning. In fact, when I turn the volume control on, the green LED on top does not illuminate. And because of this bad control, I do not have sound. Can anyone tell me how and where I can replace this control? Your assistance is appreciated. Thanks very much.
Charles

I'm also having the exact same problem, and so is a friend who has the same speaker/soundcard setup. Any help is appreciated!

A520 Speaker is only playing sound on the subwoofer and 2 other speakers

My A520 Speaker is only playing sound on the subwoofer and 2 other speakers i tried every thing I could, but cant seem to find the problem (win 8.1)

I checked on Creative's support site and search for A520 and this is what I found http://support.creative.com/kb/ShowA...aspx?sid=64705
I think because your source is stereo that's why you are only hearing sound from 2 speakers and the subwoofer. You will need to enable virtual surround in your sound card to be able to get all the speakers playing I think.
You can do a speaker test by going to sound, playback devices and click on configure to test the channels in Windows.

I want only the Illustrator and Photoshop. Is there a plan to buy for this?

I want only the Illustrator and Photoshop. Is there a plan to buy for this?

not specifically.
these are the currently available plans, Creative Cloud pricing and membership plans | Adobe Creative Cloud

How can I save ONLY the bookmarks and extensions

I am about to do a clean reinstall of Firefox. I want to save ONLY the Bookmarks and Extensions and NOTHING ELSE from the Firefox Profile. How can I do this please?
Thank you,

Both answers combined to help solve the problem. It would be good if more than one answer can be selected as "Chosen Solutions", because this situation occurs often in forums.
Thank you to both of you!
Kind regards.

My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.

My 4th Gen iPod Touch won't open up the apps I've downloaded. I've tried uninstalling and then reinstalling the app and it seems to only be a temporary fix. The reset and reboot didn't work either. Help would be appreciated.
In more specific terms. The apps that came on the iPod like the weather and maps and whatnot have been working flawlessly. It's just when I download an app and then disconnect from wifi it's almost like I'm on a timer until the app stops working. It acts like it wants to open, the screen flashes black then resets to the home pages. I've tried all of the basic fixes, rebooting, reseting, uninstalling then reinstalling. But like in my...long...question, the reinstalling option only seems to be a temporary fix. I just recently downloaded the 5.1.1 udate (I think that's what it was) does that have anything to do with it, or am I just derpy when it comes to iPods?

Try the other suggestions here:
iOS: Troubleshooting applications purchased from the App Store
Then try a restore.

Selecting and copying only the black and gray of picture

Hi everyone,
Looking for some help. I am a Paramedic Instructor and want to clean up some heart rhythms to make them more neat and presentable for use during class. Below is the sort of image I would be working with.
What I would like to do is remove only the black and gray lines (when they print out of the EKG machine some lines have some gray in them) and place them on a neater cleaner background as below
(The image above I found on a website where the creator has 100's of EKGs that this has been done with, but have been unable to get him to tell me how it was done)
Im hoping someone will be able to figure out how this can be done and lend me some help. Also let me know if another Adobe product would be more useful in this situation.
**I have CS6 Master Collection so you know what programs I have available to use**
Warm regards,
Bryan
Flight Paramedic/Instructor, Maryland

Hi Bryan,
You can probably remove most of the red lines using some method in Photoshop, like Channel Mixer Adjustment Layer (set to Monochrome) or Black & White Adjustment Layer adjusting the Red slider. Then you may have to use Levels (or Dodge Tool) to make the remaining red lines (now light gray) turn white.
Once you have a BW EKG trace with no red, you can put it on a layer above a clean graph and set its Blend Mode to Multiply.

How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

Chris Bui wrote:
Thank you Diavonex......... This is not a joke and please do respect when people really need help.
Diavonex was not treating this as a joke. He was giving you the answer to your question in a perfectly polite and respectful way. Without the Apple ID credentials to which the iPad is locked or proof that you are the original purchaser, there's nothing you can do. The device is useless to you.

Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

Similar Messages

Maybe you are looking for