Creative Inspire p5800

Hi,
Ive just bought a set ov these speakers, hooked them up and nothing, i've also tried connecting them to an mp3 player via the 'aux in' port, but still no joy.
Are they knackered?

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Similar Messages

  • Replacement Wired Remote Creative Inspire P5800

    Does anyone know whether you can buy a replacement wired remote from a Creative Inspire P5800? I've spent all morning going in circles on their website. The headphone socket is defective on mine, and I don't really want to buy a whole new system if I can help it.

    Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

  • Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

    Hello,
    I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
    Any help would be appreciated,
    Chris.

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

    I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

    well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

  • Creative Inspire 5.1 Digital 5700

    I want to buy the inspire 5700 but it is off the buy list. I li've in holland. I was watching it because it was not in stock. But after a while it was gone of the list. wenn is it getting back so i can buy it's

    kk.. ill buy the decoder DDTS-100 and with 5.1 sound. what would you suggest?
    Creative Inspire T5900
    Het Creative Inspire P580
    De Creative Inspire P5800
    De SBS560-
    with the decoder:
    Creative Decoder DDTS-100
    or buy the complete: Het Creative Inspire GD580
    its for my dvd player and tv.
    another question:
    jermey can you give me a link of DTT-100 with the Inspire T-5400 speakers. i cant find them. i live in holland maby its that...
    and another question:
    i have another question my dvd players supports dolby digital. and now i want to buy one with dolbey digital EX does that work to and another question:
    my dvd players supports 5.1 sound if i buy 7.1 sound with a decoder do i get 7.1 sound?
    srry i aks so many questions i want to make sure i buy the best:smileyvery-happy:
    Message Edited by hanspeter on 03-15-2005 03:19 PM

  • Some INSPIRE P5800 Problems

    Hi, everyone, first time poster.
    I have had Creative Inspire P5800 5.1 speakers for a couple of months now, which I run with Realtek AC'97 (onboard sound). However, there are two specific surround sound related problems that are bugging me.
    1. Windows XP sounds are only played in the two front speakers, but not in any of the rear speakers, center speaker, or subwoofer.
    2. This may not be the best place to ask this, but I use InterVideo WinDVD 6 Platinum to view DVDs. Since I want to configure it for surround sound, I change the player from a 2 channel configuration to the 6 channel configuration. However, the program is unable to detect my surround speakers, and therefore simply duplicates the front stereo for the rear speakers. The subwoofer doesn't seem to function.
    My drivers are up to date and my Sounds and Audio Devices (Control Panel) is configured to my 5.1 system. Any ideas for why this is happening? Help is greatly appreciated. Thanks!

    NoradX,
    Stereo are 2 channel only so it's normal that you obtain left and right output only. Depending on the features of the onboard audio, it may have upmixing feature to mix stereo to multiple output for a surround effect. Best to checkup with them the correct setting for the audio card.
    Jason

  • Ddts-100 and inspire p5800

    are the creative inspire p5800 speaker system compatible with the ddts-100 decoder?
    Is the decoder connectable to the K|i|s|s dp-1000 DVD Player?

    Gr33nC0d3r,
    Yes, the speaker is compatible with the DDTS-100 decoder. Also, you should be able to connect to the decoder without problems since the decoder have coaxial/optical input which most DVD player should have. What type of output connector does your DVD player have?
    Jason

  • Problem with Inspire P5800

    When I connect my headphones (Creative EP 80) to the remote control of Creative Inspire P5800, it's satellites don't mute automatically
    I have integrated souncard based on ALC 655 and Windows XP (licensed).
    What should I do to solve this problem?
    sorry for my mistakes in english, it's not my native language
    Message Edited by Konstantin on 01-27-2007 10:25 PM

    I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
    EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
    Message Edited by hij on 01-28-2007 02:31 AM

  • Creative Inspire T6100 5.1 Speakers problem

    Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
    Thanks for reading...
    EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
    Message Edited by Ripiz on 03-15-2008 10:52 AM
    Message Edited by Ripiz on 03-15-2008 10:57 AM

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

    hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
    for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
    Message Edited by big7george on 05-3-2007 04:24 AM

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Problem with Rear Speakers (Inspire P5800)

    Hi,
    I have bought the Inspire P5800 Sound System but I have a problem. When I do a soundtest with the driver software all speakers work but when I want to listen to music with Musicmatch Jukebox I don't get any sound on the rear speakers. I have on board AC97 sound on a Gigabyte K8NS motherboard.
    Can anybody help me?
    Thanks!
    robertthronhill

    robertthronhill,
    That's normal as music are mostly in stereo and that's 2 channel only. Creative sound card have CMSS feature that upmix stereo to surround soundfield but since you are using onboard audio, you will have to check with your mainboard manufacturer if those audio card have similar feature also.
    Jason

  • Can a inspire p5800 be used without a computer, as a stand alone speaker system

    Can an Inspire P5800 be used as a stand alone speaker system? Here is my story. I just got this speaker system from my girlfriend who did not know that it had to be hooked up to a computer/soundcard etc... She thought it would just hook up to my MP3 player and be used as a speaker system downstairs in my shop. It looks like the decoder DDTS-100 could be bought and used as a stand alone sound adapter? Or is there a cheaper way? The only other way I can see is a triple headphone adapter that has one 1/8 inch plug going to three 1/8 inch jacks that can be fitted with a 1/8 inch plug to plug cable in each jack, then those going into the back of the subwoofer/connector area. Would that be a mono source that way? Any help would be appriciated. marc

    I have set this system up with a creative zen vision m without using a computer just stand alown, but i have only been able to get the subwoofer, front left and right speaker to work. I dont know if that helps.

  • Help setting up Creative Inspire T6100 (5.1) to HP Laptop

    Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
    Arun.K.S

    Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
    http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
    http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
    But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
    http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
    Dennis

  • Creative Inspire 5300 5.1 Problems - Only Two Speakers Work 100%

    I recently purchased the Creative Inspire 5300 5.1 speaker system for my home computer, thinking that a low-end setup would work fine until I gathered the resources to trade them in for something better. Upon hooking them up though I find that they do not work as I was led to believe. The front two corner speakers and subwoofer work fine, just as they would if they were a 2.1 setup, however the center and back speakers make no noise. I know I have them hooked up correctly as I can go into my onboard soundcard?s setup program and test them individually, but in actually practice they do nothing. Not with games or movies that are supposedly 5.1 enabled.
    I'm clueless as to what the problem may be. Is it that I need a Creative brand soundcard, that may Abit motherboard and it'ss built-in soundcard are unable to establish the proper frequencies or whatnot? Perhaps I do not have the appropriate surround sound drivers installed? Any help would be vastly appreciated.

    DevNull7,
    You may need to enable certain settings within your sound card to upmix the Stereo to 5.1. Check with your sound card support for further information. They should be able to assit you on this.
    Jason

  • Connecting Creative Inspire 5.1 speakers to DVD player

    Hi,
    I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
    If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
    Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
    Plz reply back to [email protected]
    Thanks,Sambath

    Creative offers many speaker systems that will fit your needs, without decoder.
    You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
    If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
    The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
    To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
    You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

Maybe you are looking for