Creative Inspire P7800 Don't Work

Seems all i get is hiss, and 2 speakers of the 7 Working. I have read all the posts, and i don't see much mention of 7800 series, but it seems to be the cabling. I would like to know how i can get this system working. I would also like to know to whom i would have to call to have this problem corrected. I almost bought the logitech speaker system, and after reading all the posts here, i wish i had.
I

well i just posted twice about the P7800. Turns out the cable they send you is made for their Creative Sound cards, so if you want one to work with any other 7.1 Sound card you need to call them and order it, The cable they send you has 3 jacks. Center/Sub, Front and rear, or somethig or other, But it doesnt have teh side speakers, the Blue plug. Call their Customer Service.

Similar Messages

Creative inspire P7800 and X-fi extreme sound card on win 7

I have a dell with windows 7, the creative X-fi Extreme sound card and my creative inspire P7800. The sound has not worked properly since receiveing the computer.
I am going to assume it is my speaker and the set up.
I currently cannot even get the option to set up the 7.1 surround speakers. It only shows two. Half the time the sound doesn't work and the other half it only works on certain sites.
I would appreciate any advice on how to trouble shoot this and get it working properly.
The driver I have currently installed is the creative ver. 6.10.0.209 dated 8/27/2009.Above this there is also another listing that says ATI High Definition Audio Device. I do have the on board sound of my motherboard disabled.
If I need to install another driver please advise me of the procedure to do it correctly.
Thank you for any help!
Wanda

You may want to try downloading the card's latest driver from http://support.creative.com/Products...T=CategoryID:1
It is a new driver and is released on 28 March 2014.

Creative Inspire P7800

Hello, I have a Creative Labs Inspire P7800 7.1 audio system. It is virtually new (used it twice). Somewhere over the years I lost the power adaptor for the subwoofer. Google doesn't return many results with the info I have. I am looking for a replacement adaptor, and/or enough info to manufacture my own. The jack on the sub only says 3.5V AC in, and the manual mentions it but doesn't contain any details . Any info would be appreciated, such as: part number for adapter, amperage of adaptor, type of jack (probalbly have one that fits it), and which pin is + and -.
I'm rather electronics savy and have decent soldering skills, so making my own adaptor isn't out of the question. Also, I'm trying to avoid taking it apart to determine more. Thanks.

Ok, upon searching the forums (should have done this first), it looks like the model # is UA 460. The power is 3.5V AC 6 Amps.
Is there any sort of internal rectifier? Wil it accept DC Voltage (I assume there is an internal rectifier that converts the AC to DC)?

Creative's software don't work, driver ok,XFI FATALITY

Hi, i have windows 7 x64 whith XFI Fatality Extreme Gamer Pro-Series PCI.
I installed latest official driver (from this link[url=http://support.creative.com/Products/ProductDetails.aspx?catID=1&CatName=sound+blas ter&subCatID=208&subCatName=X-Fi&prodID=15853&prodName=X-Fi+XtremeGamer">http://support.creative.com/Products/ProductDetails.aspx?catID=1&CatName=sound+blas ter&subCatID=208&subCatName=X-Fi&prodID=15853&prodName=X-Fi+XtremeGamer[/url]) i installed the version of 16 Jun 10...and then i tryed ALCapsViewer32 for verify if i have EAX 3, 4, 5 and XRAM ,,,, and there are........
The problem is that the creative software don't work....for examples:
if i start Audio Control Panel or the others software's creative it doesn't start and tells me: The device is not present or it is working in way not supported from software.
And so i can't setting the crystalizer, SVM and more...
ANY IDEA???

I believe ONE topic is enough: [url=http://forums.creative.com/t5/Sound-Blaster/XFI-Fatality-Extreme-Gamer-Pro-Series-driver-ok-but-cretive-s/m-p/587039/highlight/false#M163211">http://forums.creative.com/t5/Sound-Blaster/XFI-Fatality-Extreme-Gamer-Pro-Series-driver-ok-but-cretive-s/m-p/587039/highlight/false#M163211[/url]

Creative ASIO drivers don't work properly with Cubase LE or WaveLab6

It seems that there is some problematic "interaction" between the Creative X-Fi Elite Pro sound card with the ASIO-driver based Audio Creation Mode console (ACMC) and "connected" ASIO applications like WaveLab 6 or Cubase LE.
I was using the SPDIF output from a DVD player. I created a audio PCM wav file at 24 bit/96 kHz with every sample in both left and right channels being identical with alternate bits set in each sample like so:
101010101010101010101010
When I record this SPDIF input stream with X-Fi Elite pro SPDIF-in using the RECORD section of ACMC with Bit-Accurate record mode set, the resultant recorded file is bit for bit identical to the source as expected. Great!
However when I record using Cubase LE and a project with 96 kHz sampling rate in a stereo channel with only the ASIO SPDIF L and R channels enabled, (keeping the ACMC with identical settings in the backgroun) the resultant wave file has lots of "noise" in the lowest 8 bits or so, almost like it was dithered. The same thing happens when I record using WaveLab 6.
So this seems to mean that somehow Creative's use of the ASIO driver in ACMC is not "sharing" the ASIO input bus signal properly with ASIO apps like CubaseLE and WaveLab6. For sure, the 24 bit audio recorded by Cubase or WaveLab6 is not "bit accurate" to the SPDIF input signal. I wonder what this means for the accuracy of details in recordings made with Cubase LE or WaveLab via Creative's ASIO driver??

GI've had enough of this creative broken windows 7 drivers issue...
selling my xtremegamer and buying an asus xonar dx card, hopefully that works fine. asus seems to at least update their drivers on a regular basis. I mean, the latest win 7 creative drivers are from '09...

Creative Inspire P7800 Middle Right Noises

Hello,
I'm having a problem w/ my middle right speaker. I haven't had this problem before until now. My middle right speaker would make static noises when I turn on the volume. I tried unplugging the output wire to my computer and it still make the static sound so I know for sure the static isn't outputting from my computer. I tried plugging in different speaker into the Middle right port and it makes those noise. The noise is pretty annoying when I'm not playing music. It sounds like something is hissing. So is there any way I can fix the output port of my middle right output? I tried opening it but the wire connecting to the subwoofer is attached so I can't do anything about it. Any way to fix this? (I bought this like a year or 2 ago so I don't think i have manufacture warranty or do i?)
Message Edited by DetectiveLoki on 09-08-2008 12:02 PM

off subject a little, but i recommend buying a 60 gig off amazon.com. those were the first models to be released and they really are much better than any of the other models they have made. 40 gigs and 80 gig models really don't have all the features like backwards compatability and the four usb ports. it will cost you a little bit more but it is worth every penny.
as for the dts... i found out that will work, but i am concerned about the four linear formats that the ps3 uses. my sound card works with the two basic ones that my computer uses, but i am hoping to find out when i get windvd in the mail if the speakers will work with the other two.

Inspire P7800 Speaker only works alone / not when other speakers play.

So i set up the speaker system, yes everything is plugged in, no I do not have a Creative soundcard, so i just upmixed from 5.1 to 7.1 so my side speakers play. Everything is great except for my top right speaker. It seems not to play at all, no matter what jack i put it into, so I assumed it was broken. However, it only does not work when I play music, when I test to see if the speaker works through SoundMax, it works when I cycle sound to each speaker in turn, but not when i play all the speakers at once. Any help would be appriciated.
Thnx,
Gasior77

nvm i got it now, sorry lol

Creative Inspire P7800 90 Watts 7.1 Speaker

I am considering buying this speaker system and I was wondering how it will perform with a
Sound Blaster Live 24 Bit sound card. Thanx

Quote from: SnOt_BuBbLe on 30-March-06, 11:59:47
If you are getting sound when you are "testing" but not when trying to play files it could be that you didn't connect your cd rom to your sound card's auxillary (for playing cd or dvd) or you have certain file types muted...for example...it is possible you have wave muted...but midi is not. check your volume control properties and see what is marked with a red X...creative is notorious for having some sources muted.
STUPID QUESTION #1, With the Diamond Plus Sound card having sound card on board the MB, where do I find the AUX of the sound card?
STUPID QUESTION #2 I recall years ago having similar issues with a sound blaster card, and yes it was related to some things being muted. Where are those volume control property settings, and what are the proper settings?

Creative Inspaire P7800 Replacement Cable

I am trying to find a replacement cable for my 7.1 Creative Inspire P7800. The cable I need is the 4:3 cable that runs from the subwoofer to the sound card. One of my cats chewed through one of the wires, and I am having a difficult time finding a replacement. I called customer support, but they don't carry that particular cable anymore. Any information I can get would be very helpful. Thanks!
*edit* I have a Creative Audigy 2 Value sound card. Is this cable even needed? Or can I used a regular 4:4 cable? Or two 2:2 cables? Help!
Message Edited by rikimaru on 07-21-2008 08:01 AM

Ok, upon searching the forums (should have done this first), it looks like the model # is UA 460. The power is 3.5V AC 6 Amps.
Is there any sort of internal rectifier? Wil it accept DC Voltage (I assume there is an internal rectifier that converts the AC to DC)?

Inspire P7800 vs. Inspire T7900?

What's the difference between the Creative Inspire P7800 and Inspire T7900? The only difference I can see is that the mini tweeters in the left, center, and right speakers wit hthe T7900 set are missing in the P7800 set. Is the sound quality really different, or what?

gaboritz,
The speaker is connected to the computer soundcard and the soundcard is the one that's interacting with the OS. If there is no sound from the speaker, there is only 2 possibility. Either the speaker is faulty or the soundcard is faulty or not interacting properly with the new OS.
Have you try updating to the latest soundcard driver?
Jason

Side, back, and center speaker on inspire p7800 not working, PLEASE HELP!

I have had the inspire p7800 speakers for awhile, and they worked great, the sound was really great. Then a little while ago, the side, back, and center speaker stopped working. If i turn the volume up, i can hear a kind of static noise in them, but when i play a game or listen to music they don't do anything. i have an Audigy 2 zs sound card, and i just installed all the creative mediasource software. I was using the speakers fine without the software, but i read on a different post, that you can turn on cmss in the EAX control panel. i installed all the stuff, but i can't find the EAX console anywhere on my computer. all the mediasource is is a music player, and a file converter. The speakers stopped working about a week before this, and i unplugged everything and repluged it. After that the center speaker didn't work, but the others did. but now only the front left, and front right speakers work. Please help me with this problem.
Message Edited by Will99 on 10-19-2005 12:42 AM

Warran wrote:
I just got the speaker system in today and was trying to set it up, I plugged all the wires in all the right places and the system would not power up. I saw the light for the wired remote flash just once. I thought it was? a power malfunction so I got a different power cord and tried it out, but still nothing...could somebody please help me. Thanks in advance.
If it doesn't power up then it's either the subwoofer or power adaptor that's faulty. So the only thing you can do is contact customer support or the vendor.

Creative Inspire T900 problem, just 2 front speakers work when connect to a laptop

Hi everybody,
I have just bought a Creative Inspire T7900 system, it's in good quality I think.
But I just got a laptop without 5.1/6.1 or 7/ sound card ( one output only ), therefore i cannot use the 7.1 Audio Cable.
I tried to use a stereo-to-stereo cable to connect my laptop to the input in the wired remote but only the front satellite speakers work. Is that a problem with the Wired Remote ? Or the problem with the system ?
Can I laptop use all the speakers ?
Please help me, thank you very much.

thanhvtd86,
There isn't any problem with the speaker system nor your laptop and it's normal. Stereo consists of only 2 channel and that's why you are experiencing output from only the two front speaker. You won't be able to utilize the full capability of the speaker if you don't have a 7.1 capable soundcard.
Jason

How to get Realtek HD Audio to work with Creative Inspire 5.1 5200?

Hi,
I have a problem with correctly setting the Realtek HD Audio with my Creative Inspire 5200 5.1 speaker set. I don't get any sound on all of them when test button is clicked, only surround speakers work. They were working on my old PC. I did a search on this forum and Internet, but could not find any solution to this specific problem.
Setting:
* MSI drivers: 6.0.1.6267, directx 11, ALC 892
* Speakers set to default audio device
* Plugged in 3 jacks, colors matching (3 in a row - black:rear, orange: center/subwoofer, green:side speakers)
* On Realtek HD Audio Manager: Speaker configuration: 5.1 Speaker; Optional spakers: center, subwoofer, rear pair checked; full range speakers: front left and right and surround speakers checked; speaker fill/swap/bass management disabled.
What I get:
* left surround clicked: OK
* right surround clicked: OK
* No sound from others
Tests:
* Checked not muted
* Checked volume control, not set to zero
* Rechecked cables from MB to Creative Subwoofer
* Rechecked cables from Creative Subwoofer to speakers
* Checked other spaker configuration settings:
- Stereo : no sound
- Quadro: only surround spakers OK
- 7.1: surround spakers OK + left 2nd surround sound comes from right front speaker
Any directions are very much appreciated
Cheers
Bülent
PS: See signature for my setup

Quote from: syncman on 30-October-10, 03:10:54
I get something very similar with my Logitech 5.1 setup. However, I'm using a Creative Pro sound card. Some reminders for you. Remember that everyday normal sound is not encoded DD 5.1, i.e. Windows prompts, MP3, etc. 2 channel left and right stereo sound only nets 2 speakers even though you have 5.1. Unless you've set the sound card, or speaker controler to convert normal 2 channel left and right stereo to DD 5.1 you will only hear 2 speakers. It takes software that's dolby digital encoded to bring all 5.1 speakers to life. For example for every day computer sound my logitch speaker controller is set to "stereo x 2.1". With this setting the contoller sends 2 channel stereo to the front 2 speakers as well as rear 2 speakers plus the sub woofer. My center channel stays quiet until I change the controller effect to DD 5.1. I would change the speaker controller to DD 5.1 if I were to watch a DD 5.1 encoded DVD movie, or play a DD 5.1 encoded game. Keep in mind unless the software is encoded DD 5.1 anything you hear through all 5.1 speakers is SIMULATED! IMO the stereo x 2.1 sounds MUCH better than simulated DD 5.1.
Thank you for your answer, but I couldn't go so far yet I know some about sound and sound setups as I'm working in this area, namely video editing, sound processing, montage etc.
The problem is at "test button" level, somehow the mobo cannot drive the correct lines :(

Creative Inspire 5300 5.1 Problems - Only Two Speakers Work 100%

I recently purchased the Creative Inspire 5300 5.1 speaker system for my home computer, thinking that a low-end setup would work fine until I gathered the resources to trade them in for something better. Upon hooking them up though I find that they do not work as I was led to believe. The front two corner speakers and subwoofer work fine, just as they would if they were a 2.1 setup, however the center and back speakers make no noise. I know I have them hooked up correctly as I can go into my onboard soundcard?s setup program and test them individually, but in actually practice they do nothing. Not with games or movies that are supposedly 5.1 enabled.
I'm clueless as to what the problem may be. Is it that I need a Creative brand soundcard, that may Abit motherboard and it'ss built-in soundcard are unable to establish the proper frequencies or whatnot? Perhaps I do not have the appropriate surround sound drivers installed? Any help would be vastly appreciated.

DevNull7,
You may need to enable certain settings within your sound card to upmix the Stereo to 5.1. Check with your sound card support for further information. They should be able to assit you on this.
Jason

I have a MAC. I have Adobe Creative SUite 5.5. I have installed Yosemite. Adobe CS 5.5 don't work!!! Error 16. I have redifined permission. But Adobe ask me serial number my suite. But i can't go on!!!

I have a MAC.
I have Adobe Creative SUite 5.5.
I have installed Yosemite.
CS 5.5 don't work!!!
Error 16. I have redifined permission.
But Adobe ask me serial number my suite.
But i can't go on!!!

Please refer:
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Regards,
Ashutosh

Creative Inspire P7800 Don't Work

Similar Messages

Maybe you are looking for