Creative Inspire P7800

Hello, I have a Creative Labs Inspire P7800 7.1 audio system. It is virtually new (used it twice). Somewhere over the years I lost the power adaptor for the subwoofer. Google doesn't return many results with the info I have. I am looking for a replacement adaptor, and/or enough info to manufacture my own. The jack on the sub only says 3.5V AC in, and the manual mentions it but doesn't contain any details . Any info would be appreciated, such as: part number for adapter, amperage of adaptor, type of jack (probalbly have one that fits it), and which pin is + and -.
I'm rather electronics savy and have decent soldering skills, so making my own adaptor isn't out of the question. Also, I'm trying to avoid taking it apart to determine more. Thanks.

Ok, upon searching the forums (should have done this first), it looks like the model # is UA 460. The power is 3.5V AC 6 Amps.
Is there any sort of internal rectifier? Wil it accept DC Voltage (I assume there is an internal rectifier that converts the AC to DC)?

Similar Messages

  • Creative inspire P7800 and X-fi extreme sound card on win 7

    I have a dell with windows 7, the creative X-fi Extreme sound card and my creative inspire P7800. The sound has not worked properly since receiveing the computer.
    I am going to assume it is my speaker and the set up.
    I currently cannot even get the option to set up the 7.1 surround speakers. It only shows two. Half the time the sound doesn't work and the other half it only works on certain sites.
    I would appreciate any advice on how to trouble shoot this and get it working properly.
    The driver I have currently installed is the creative ver. 6.10.0.209 dated 8/27/2009.Above this there is also another listing that says ATI High Definition Audio Device. I do have the on board sound of my motherboard disabled.
    If I need to install another driver please advise me of the procedure to do it correctly.
    Thank you for any help!
    Wanda

    You may want to try downloading the card's latest driver from http://support.creative.com/Products...T=CategoryID:1
    It is a new driver and is released on 28 March 2014.

  • Creative Inspire P7800 Don't Work

    Seems all i get is hiss, and 2 speakers of the 7 Working. I have read all the posts, and i don't see much mention of 7800 series, but it seems to be the cabling. I would like to know how i can get this system working. I would also like to know to whom i would have to call to have this problem corrected. I almost bought the logitech speaker system, and after reading all the posts here, i wish i had.
    I

    well i just posted twice about the P7800. Turns out the cable they send you is made for their Creative Sound cards, so if you want one to work with any other 7.1 Sound card you need to call them and order it, The cable they send you has 3 jacks. Center/Sub, Front and rear, or somethig or other, But it doesnt have teh side speakers, the Blue plug. Call their Customer Service.

  • Creative Inspire P7800 90 Watts 7.1 Speaker

    I am considering buying this speaker system and I was wondering how it will perform with a
    Sound Blaster Live 24 Bit sound card. Thanx

    Quote from: SnOt_BuBbLe on 30-March-06, 11:59:47
    If you are getting sound when you are "testing"  but not when trying to play files it could be that you didn't connect your cd rom to your sound card's auxillary (for playing cd or dvd) or you have certain file types muted...for example...it is possible you have wave muted...but midi is not.  check your volume control properties and see what is marked with a red X...creative is notorious for having some sources muted.
    STUPID QUESTION #1, With the Diamond Plus Sound card having sound card on board the MB, where do I find the AUX of the sound card?
    STUPID QUESTION #2 I recall years ago having similar issues with a sound blaster card, and yes it was related to some things being muted.  Where are those volume control property settings, and what are the proper settings?

  • Creative Inspire P7800 Middle Right Noises

    Hello,
    I'm having a problem w/ my middle right speaker. I haven't had this problem before until now. My middle right speaker would make static noises when I turn on the volume. I tried unplugging the output wire to my computer and it still make the static sound so I know for sure the static isn't outputting from my computer. I tried plugging in different speaker into the Middle right port and it makes those noise. The noise is pretty annoying when I'm not playing music. It sounds like something is hissing. So is there any way I can fix the output port of my middle right output? I tried opening it but the wire connecting to the subwoofer is attached so I can't do anything about it. Any way to fix this? (I bought this like a year or 2 ago so I don't think i have manufacture warranty or do i?)
    Message Edited by DetectiveLoki on 09-08-2008 12:02 PM

    off subject a little, but i recommend buying a 60 gig off amazon.com. those were the first models to be released and they really are much better than any of the other models they have made. 40 gigs and 80 gig models really don't have all the features like backwards compatability and the four usb ports. it will cost you a little bit more but it is worth every penny.
    as for the dts... i found out that will work, but i am concerned about the four linear formats that the ps3 uses. my sound card works with the two basic ones that my computer uses, but i am hoping to find out when i get windvd in the mail if the speakers will work with the other two.

  • Creative Inspaire P7800 Replacement Cable

    I am trying to find a replacement cable for my 7.1 Creative Inspire P7800. The cable I need is the 4:3 cable that runs from the subwoofer to the sound card. One of my cats chewed through one of the wires, and I am having a difficult time finding a replacement. I called customer support, but they don't carry that particular cable anymore. Any information I can get would be very helpful. Thanks!
    *edit* I have a Creative Audigy 2 Value sound card. Is this cable even needed? Or can I used a regular 4:4 cable? Or two 2:2 cables? Help!
    Message Edited by rikimaru on 07-21-2008 08:01 AM

    Ok, upon searching the forums (should have done this first), it looks like the model # is UA 460. The power is 3.5V AC 6 Amps.
    Is there any sort of internal rectifier? Wil it accept DC Voltage (I assume there is an internal rectifier that converts the AC to DC)?

  • Inspire P7800 vs. Inspire T7900?

    What's the difference between the Creative Inspire P7800 and Inspire T7900? The only difference I can see is that the mini tweeters in the left, center, and right speakers wit hthe T7900 set are missing in the P7800 set. Is the sound quality really different, or what?

    gaboritz,
    The speaker is connected to the computer soundcard and the soundcard is the one that's interacting with the OS. If there is no sound from the speaker, there is only 2 possibility. Either the speaker is faulty or the soundcard is faulty or not interacting properly with the new OS.
    Have you try updating to the latest soundcard driver?
    Jason

  • Side, back, and center speaker on inspire p7800 not working, PLEASE HELP!

    I have had the inspire p7800 speakers for awhile, and they worked great, the sound was really great. Then a little while ago, the side, back, and center speaker stopped working. If i turn the volume up, i can hear a kind of static noise in them, but when i play a game or listen to music they don't do anything. i have an Audigy 2 zs sound card, and i just installed all the creative mediasource software. I was using the speakers fine without the software, but i read on a different post, that you can turn on cmss in the EAX control panel. i installed all the stuff, but i can't find the EAX console anywhere on my computer. all the mediasource is is a music player, and a file converter. The speakers stopped working about a week before this, and i unplugged everything and repluged it. After that the center speaker didn't work, but the others did. but now only the front left, and front right speakers work. Please help me with this problem.
    Message Edited by Will99 on 10-19-2005 12:42 AM

    Warran wrote:
    I just got the speaker system in today and was trying to set it up, I plugged all the wires in all the right places and the system would not power up. I saw the light for the wired remote flash just once. I thought it was? a power malfunction so I got a different power cord and tried it out, but still nothing...could somebody please help me. Thanks in advance.
    If it doesn't power up then it's either the subwoofer or power adaptor that's faulty. So the only thing you can do is contact customer support or the vendor.

  • Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

    I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

    well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

  • Help setting up Creative Inspire T6100 (5.1) to HP Laptop

    Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
    Arun.K.S

    Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
    http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
    http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
    But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
    http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
    Dennis

  • Creative Inspire 5300 5.1 Problems - Only Two Speakers Work 100%

    I recently purchased the Creative Inspire 5300 5.1 speaker system for my home computer, thinking that a low-end setup would work fine until I gathered the resources to trade them in for something better. Upon hooking them up though I find that they do not work as I was led to believe. The front two corner speakers and subwoofer work fine, just as they would if they were a 2.1 setup, however the center and back speakers make no noise. I know I have them hooked up correctly as I can go into my onboard soundcard?s setup program and test them individually, but in actually practice they do nothing. Not with games or movies that are supposedly 5.1 enabled.
    I'm clueless as to what the problem may be. Is it that I need a Creative brand soundcard, that may Abit motherboard and it'ss built-in soundcard are unable to establish the proper frequencies or whatnot? Perhaps I do not have the appropriate surround sound drivers installed? Any help would be vastly appreciated.

    DevNull7,
    You may need to enable certain settings within your sound card to upmix the Stereo to 5.1. Check with your sound card support for further information. They should be able to assit you on this.
    Jason

  • Connecting Creative Inspire 5.1 speakers to DVD player

    Hi,
    I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
    If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
    Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
    Plz reply back to [email protected]
    Thanks,Sambath

    Creative offers many speaker systems that will fit your needs, without decoder.
    You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
    If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
    The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
    To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
    You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

  • Creative Inspire T6100 5.1 Speakers problem

    Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
    Thanks for reading...
    EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
    Message Edited by Ripiz on 03-15-2008 10:52 AM
    Message Edited by Ripiz on 03-15-2008 10:57 AM

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Creative Inspire T6100 5.1 Speakers and Creative Vision M 30 GB

    hey i wonder if you could help me, i would like to get some Creative Inspire T600 5.1 Speakers
    for my vision m but i have read some reviews that you need 3 audio inputs to get all the speakers working so there isn't much point in buying them unless any of you know if there is an adapter or speakers like this in the same price range which will work fully with my vision m. also would these speakers work off a tv?thanks very much
    Message Edited by big7george on 05-3-2007 04:24 AM

    Hi all do you have any idea to solve my problem?
    Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
    -Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
    -or maybe my component circuit like ic,capacitor,diode burned?
    If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
    Please answer me...
    Thank You

  • Creative Inspire 5200 5.1 Bass setting

    I am currently using Creative inspire 5200 5.1 speaker system with X-fi Xtreme music sound card,can anybody suggest me the best setting so that i can get best bass for music,and Dolby/dts movies?.
    i did try the +5 dB subwoofer gain from THX console,but that makes more of a unnatural sound....so pls do suggest the best setting possible for getting perfect sound out of my speakers...
    thanks in advance,
    karthik

    Just adjust according to how you like it. Everyone preferences is different so their so called "best setting" is different too.

Maybe you are looking for