Creative labs zen touch always breaks up after copying mp3s to

Hi,
Im copying music with the windows media player, newest firmware is installed. My prob is that always when i want to make music on my mp3 player he brakes up after the copying and i can only reset him. Another strange thing is that i can only copy song the second wont copy, but this is only when he isnt fresh resetted. What can i do? Its very annoying and i dont think its good when i reset my player 0 times a day... I tried the fixing things of the player already like make a disk repair and stuff - nothing worked

Help please... Does no one know what it could be? I can only get my zen work with media player, other programms like winamp arent working...

Similar Messages

  • Creative Labs Zen

    I just purchased the C 2GB.
    This is in the list of supported player in
    http://www.oclc.org/audiobooks/techspecs/devices.htm.
    I am using WMP, latest firmware .2.03.
    I have downloaded audio books from Netlibrary (protected wav files).
    I can open the files in WMP and real player but once I tried to copy the files (sync) to Zen player using WMP and realplayer or just right click copy to Zen, I get an unsupported file type. Same when using the Creative Suite.
    I tried looking for others who may have the problem but it seems like noone has the same problem.
    MP3 Audio books sync/copied OK.
    Any more ideas? (I have a Cowon D2 - synced OK - but it isn't mine)
    Please help...or I might just have to return this.

    dma0725 wrote:
    I just purchased the Creative Labs Zen 2GB.
    This is in the list of supported player in
    http://www.oclc.org/audiobooks/techspecs/devices.htm.
    I am using WMP, latest firmware .2.03.
    I have downloaded audio books from Netlibrary (protected wav files).
    I can open the files in WMP and real player but once I tried to copy the files (sync) to Zen player using WMP and realplayer or just right click copy to Zen, I get an unsupported file type. Same when using the Creative Suite.
    I tried looking for others who may have the problem but it seems like noone has the same problem.
    MP3 Audio books sync/copied OK.
    Any more ideas? (I have a Cowon D2 - synced OK - but it isn't mine)
    Please help...or I might just have to return this.
    I don't think I have ever seen a DRM WAV file on NetLibrary. I have only seen WMA or MP3 files. Contact them & ask if the file is supposed to be WAV or WMA. Also check that the clock on your player has the correct time & date.

  • Playlists - CREATIVE LABS ZEN N

    Hi,
    I` am about to buy a CREATIVE LABS ZEN NANO GB and wants to ask if its possible to create playlists on this mp3 player?

    No, unfortunately this player doesn't support playlist. If you're looking for playlist capable player, you can look at the Zen MicroPhoto, Zen Micro, Zen Vision, Zen Vision M,etc. Which other player are you interested in? Post them up and others should be able to advise you along too.
    Jason

  • More New Creative Labs Zen MP3 Players by Christmas 2

    More MP3 players coming up, Zen Stone is only a appetizer..more X-Fi coming up toolink

    dma0725 wrote:
    I just purchased the Creative Labs Zen 2GB.
    This is in the list of supported player in
    http://www.oclc.org/audiobooks/techspecs/devices.htm.
    I am using WMP, latest firmware .2.03.
    I have downloaded audio books from Netlibrary (protected wav files).
    I can open the files in WMP and real player but once I tried to copy the files (sync) to Zen player using WMP and realplayer or just right click copy to Zen, I get an unsupported file type. Same when using the Creative Suite.
    I tried looking for others who may have the problem but it seems like noone has the same problem.
    MP3 Audio books sync/copied OK.
    Any more ideas? (I have a Cowon D2 - synced OK - but it isn't mine)
    Please help...or I might just have to return this.
    I don't think I have ever seen a DRM WAV file on NetLibrary. I have only seen WMA or MP3 files. Contact them & ask if the file is supposed to be WAV or WMA. Also check that the clock on your player has the correct time & date.

  • Zen Touch shows no reaction after re

    Hello @ everyone, I've got a problem with my Zen Touch. It doesn't do anything apart from showing the Start Up screen ( the one where it says Creative, Copyright 2004 etc.) and even that only when I connect it with the charger.
    That was a result of me resetting it after it got stuck on a song. Strangely it played that song right to the end, while no button could be pushed.
    Tried everything, eg resetting with the paperclip while pushing play, no difference whether i plugged it in during that or not.
    Had some problem like that before, but after i gave up on it, the player mysteriously revi'ved after i put the charger in HALF a year later!!!
    Is there any hope for it not being completely damaged? Or should i try to open it's The warranty is expired anyway...
    Oh yes, and I DID search the forum but did not find what I was looking for.
    Help is very much appreciated. Medellia

    The hard disk is dead..
    A Gen4 TC if less than 3 years old and you have applecare on a computer might still be in warranty.
    Otherwise open it up and replace the hard disk.
    See http://www.ifixit.com/Device/Apple_Time_Capsule

  • Creative Labs Zen NX Nomad Jukebox and Vi

    Hey all- Hope I can find some help here.
    I recently got a new system, and it is running Vista Premium. I have an older mp3 player that I got from my brother-a 30GB Zen Nomad NX Jukebox. I have installed all of the (very old)software on the CD that came with it. However, my problem is whenever I hook up my MP3 player, it says that there isn't a driver installed. I have gone on the download page and downloaded all of the driver software and installed it, but I still have this message come up.
    When I check it on my computer, it says that my player isn't connected. Any help?

    Creative Labs, with their large corporation mindset, apparently decided to pursue an ill-advised Marketing Strategy by not releasing a needed Vista driver for the many thousands of Zen NX players out there. This is no doubt due to GREED, because they seem to want to be selling additional thousands of their more recently released MP3 players.
    No good for them. I'm confident a huge base of professional software developers will stop recommending Creative products to their corporate base due to this arrogance . . .

  • Zen Touch Hard Disc problem (after repai

    I just recently got my zen touch back from warentee repair were I beli've it was referbished.
    However, within 2-3 weeks from getting it back its already acting up again
    songs will jump or play another song alltogether for a couple secounds during play.
    Also in the last hour I can hear the hard disc scratching on the inside and i tried disc cleanup but found that it wont even go past the menue when I turn it on.
    Any tips?

    Contact support and get it replaced.

  • Zen touch unrecognized on comp after year of u

    i plug it in and get the "this device can perform faster in a usb2 outlet" (unfortunately i only have usb but this has never been a problem before). I put new music on it in the last month but today when i plugged it in it's not being recognized by the organizer or explorer as being connected. the little bubble box asking if i want to organize now isnt coming up and i cant access it. i went into recovery mode and cleaned it up but still nothing. any ideas?

    Have you changed anything on your computer? i.e. changed/updated drivers?
    You may want to try reinstalling the zen touch software and drivers. There may also be a problem with the USB drivers on your computer.
    Right click on the "My Computer" icon > "Properties" > "Hardware" tab > "Device Manager" > scroll down to "Uni'versal Serial Bus Controllers" and you should see different components when you expand it. Windows will tell you if there is a problem, but if want to be sure you can uninstall them (right click > uninstall), restart windows and the drivers will be installed again.

  • Creative Lab Zen Dead?

    Okay so today I was listening to my zen before I went to school and it was chill and I put it into my backpack. After I get home, I try to turn it on and nothing (battery somehow got fully discharged?). Then I plugged it into my computer and no blue light is coming on so I am very scared like my battery somehow died even though I don't even use this player for more than 2 hours per week. I had a problem like this when I first got my zen and I ended up having to exchanging it (this happened to two earlier zens) but I haven't had a problem like this since I had this one. So any advice?

    <hr />darkdallasnight wrote:
    NVM my brother told me to reset and whoa...creative plz dont let me down lol because I love this player and I AMMMMMMMMMM so stoked that it fixed! <hr />
    Ok.. your brother beat me to it. I was still writting my reply above when you posted. Glad to hear you've got it working.

  • Creative Labs Zen Sl

    Is it wise for me, (I li've in Australia), to purchase an as yet unreleased Zen Sleek. In theory it should be okay, but you can never be sure. Windows operating systems and USB connections are uni'versal, but if the Zen sleek requires some sort of outboard charger, I could be in trouble. Any ideas?

    Also, when you are charging the battery for the first time, give it at least 6 hours or overnight.
    luvmyrescuedogs

  • Little question about Creative Labs Zen Nano P

    I have a Zen Nano Plus but I have trouble with it
    My computer doesn't find him
    What can I do?
    I'm running Windows 98

    Hi Sara,
    The minimum system requirements for that player are:
    Microsoft? Windows? 98SE/Me/2000/XP
    If you have Windows98 (not SE), then that won't work correctly, it does not have proper USB support.
    Cat

  • Creative Lab Zen M 30gb Unknown Dev

    I am at my wits end. My mp3 was working fine until now - My computer doesn't recognize it and I have read and tried almost everything mentioned. I tried it in 3 other computers - no luck. It will charge but I can't download as it won't dock. Can someone PLEASE help? I tried contacting Creative but they weren't much help at all. Thanks

    Does this happen all the time? Perhaps you can try updating the player firmware and see if it hel
    ps.
    Jason

  • Creative Labs Zen Micro Mp3 Pla

    My player is stuck on the Creative screen--tried the reboot process and get nothing--is there a way to reboot other than taking the battery out and replacing while holding the on off switch--Please Help!

    loading time? do you mean the time it takes to recharge? on USB i think it's around 3-4hrs. i bought the AC adapter recently, i love it. it was around 25$ at walmart and that cuts the charge time by around /2 or so. you can also run it on AC without the battery so it'll last you longer.

  • Creative Labs Zen - Best way to use memory c

    I'm thinking on buying a Zen but I am torn between the 32GB and the 6GB version. With the SD Memory Cards not able to interact with some of the regular memory features, how should I best use the memory card? Should I be keeping my playlists (2 of them, 700 to 300 songs in size) on the memory card and the videos that I load on the palyer memory or vice-versa? Can I access shuffle play options when playing songs from an SD memory card?

    Need more detail about the test setup. You are saying you need to use LabVIEW RT to interface with your C++ code. Is there are reason you need real-time performance? Usually, if you perform acquisitions of large data sets followed by analysis of that data, you don't need real-time performance because you cannot achieve one anyways. It would be much better if you can get away with LabVIEW and your commercial board installed in the PC. Then, you would interface with your C++ code either by calling exportable library functions through a DLL that you create in C++, or through a CIN.
    If you have to use the LabVIEW RT, then I would suggest that you implement your solution (code) completely in LabVIEW RT instead of importing C++. It would be much easier. In that case you need a hardware target, which is running a real-time OS,separate from your development PC. Then you have to check that the driver that comes with your card is supported in LabVIEW RT, and if it isn't, you have to make one to be able to use the card in LabVIEW RT. You see how it adds to the complexity of the system. Not to mention that you would need two PC's (one for development and GUI, and the other for the DAQ hardware and real-time processes).

  • Creative Labs Zen Micro installation drivers need

    This must be the only mp3 player that requires installation on every computer you want to download music files on to. Major pain in the ass, IMO. But if anyone would be so kind as to send me the installation drivers, I would be extremely grateful. I lost the original installation CD and don't want to purchase another one through the Creative site, which I think is really stupid too. That should be free. Other than that minor issue, I love my Micro!!

    klsassi,
    As OSUScooby mention, all the driver/application you need to sync with the player can be downloaded via the download section within the website. Also, it's definitely not the only player on earth that require driver/software to work with.
    Jason

Maybe you are looking for

  • Will my web site created with iweb hosted by fatcow work on icloud?

    will my web site created with iweb hosted by fatcow work on icloud?

  • Running multiple instances of same servlet

    I am trying to run multiple webapps off of the same weblogic5.1 instance.           I have setup the webapps and they work individually, but I need one servlet           to load at startup.           I have only been able to do that by including it b

  • SAP script change editor

    Hi All there, In SAP-Script when I am writing in commands in form editor it shows half part of the page and outside the editor it shows '>' which indicate there are line exist how to go o the end of lines. Regards Sagar

  • Why does the "Dispose Report.vi" doesn't release memory used by report

    I have prepared report that includes a few tables After finishing printing, the amount of memory used by my application is bigger. Next printing of the raport lead to crash the LabView because of lack of memory. It also cause mu application to work s

  • A big present to the man who solve my littel problem

    Hello ! My name is Eli and i want to ask you somthing about Applet. I creat an Applet that connect to server .when i try to connect with the applet viewer is ok but when itry to connct with the Explorer it`s not work out ,there is a security problem