Creative live vista cam model VF0100

send me the driver please...@ my email add. [email protected]

?Take a look at this :?Windows Vista - Driver Availability Chart?http://ask.europe.creative.com/SRVS/...e.com,case=486

Similar Messages

  • Creative Live Vista IM (VF0420) Problem, PLEASE HELP!

    Hi
    I use Freetrack to play Airplane Combat Simulators, it's a program that uses the WebCam and a hat with 3 LED to simulate the head movement inside the cockpit.
    I'm using Creative Live Vista IM (VF0420) installed the CD drivers and it works perfectly with the Freetrack and all the other programs.
    Recently i've bought a Joystick (Saitek Aviator), so I installed the drivers on the CD plugged in the Joystick and it was also working perfectly.
    The problem is that now the camera it's not working and the only way to get the camera working is to unplug the Joystick and restart the computer.
    After the restart I tested the camera and it was working ok, but again, just after I plug in the Joystick the camera freezes the image and stops working until the next restart with the joystick disconnected.
    Resuming, this camera only works when the joystick is disconnected since the computer restart. LOL
    I'm using Windows XP 32 Bit + SP2
    I tested with other webcam (also Creative) and had no problems working with Freetrack and no conflicts with the Joystick.
    I see no conflicts on the Device Manager.
    Anyone with the same problem or with the solution please reply.
    Thank's in advance.

    buddhika wrote:
    Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
    I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
    I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
    then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
    I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
    I have questined creative support but no answer.
    Please help me !!
    If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
    Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
    Disable the Creative CD-ROM detector (service).
    jutapa

  • Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

    Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
    I have to use external microphone from Logitech now.
    I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
    It looks like the drivers for Windows 7 are wrong.

    hey Killthebeeping,
    if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
    let windows install its generic driver.
    once done plugin your usb mic and test it again.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Creative Live Vista IM webcam VF0260 on XP professional

    Hi, i can't install the VF0260 webcam on my XP 32 bit machine. I downloaded the driver from the creative support page, and when i try to run SETUP.EXE i get a message telling me the setup is for VISTA only Please help Thanks

    You may want to ask this on a Skype forum to get a better answer. If your image is viewable on the other end, then your camera is obviously working and the problem is with your Skype configuration.
    Good luck,
    Dale

  • Unlocking creative Live! Cam Network Pro

    I just installed Li've cam network Pro and the the camera screen just shows a black sacreen with a padlock over stick figures.
    I assume this is the parental control that was mentioned in the installation. Where do I go to put in the password to unlock it's

    indigodanielle,
    I presume that you have Win XP.Go to your Control Panel and then to Add/Remove programs, look for all the Creative applet and drivers that you could see from there pertaining to this webcam and remove it. Upon doing so, reinstall it back and see if it works then.
    Good luck,

  • Creative live! Cam video im pro

    ok first of all my mic isnt working
    it will work with the creative program not aim or any other website like stickam
    also i am only getting 4 frames per second

    I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

  • Creative Live! Cam (VF0400) with Skype (don't work)

    Hi Guys,
    This is getting pretty desperate... as this is actually my 3rd unusable webcam for my iBook (OS X 10.4.11):(
    I checked the macam website and the list said this webcam works but I can't seem to get it to work with Skype. It works with the Macam app but Skype don't recognise it. Anyone with prior experience please help because I can't seem to find any info on the Skype's help dbase.
    Any help is appreciated!

    Hello Moses,
    I once had the same problem as you. Did you do everything the readme file said? Where I'm going to: did you copy the macam.component file to the Quicktime library folder? If not copy it to the /Library/Quicktime/ folder. It should work just fine.
    Best regards

  • Live! Cam Voice won't run on Windows Vista 64-bit OS

    I recently upgraded my OS to Windows Vista Home Premium 64-bit system. I downloaded the beta softwares (webcam driver & cam center) for my Creative Live! Cam Voice & everything looks fine until I run the Creative Live! Cam Center. Right after running the Cam Center & clicking Start it says initializing then my PC screen turns blue with several error message in it. My webcam also doesn't seems to work.

    I am having a problem downloading to a new Windows Vista 64 machine. When I download using either IE or Firefox, the download gets to 14.7 MB and stops. Any ideas on why the download will not work?

  • Creative Live Motion - Vista - no pan and tilt softwa

    Everything seems to work. The driver installed perfectly and the webcam center also. Did anyone find or download pan and tilt software for this webcam for vista thanks much

    Have found another used Creative Live Motion cam. I guess the one I have has got some malfunction.
    Trying to replace some part of my new one from the donor old camera. Will post the result with pictures.
    For all the people experiencing extremely slow frame rate, a non-documented and not known fix is simple. Just disable the Auto Exposure checkbox in the camera settings first tab and see the smooth results. Manually adjust the exposure to a reasobable value according to camera placement and enjoy.
    Say thanks if your problem is solved.
    Thanks.

  • Wireless Live Internet Camera

    I am on a Macintosh (OSX) and recently plugged in my wireless camera again. The both the power and wireless lights are illuminated (green). There is not an installer for this product on the Macintosh. Also, the user guide download does not open fro Creative's site.
    Anyone have the first steps they can share for me to start using this?
    I presume I reset the device and plug it into an active ethernet connection for me to administer it....
    Any information would be appreciated.
    Thanks,
    Jeffster?

    Hi Jeffster,
    The Wireless Live Internet Camera (Model number: 73VF0800000) is not going to work in your Mac (OSX) nor it would have an installer. Below is the minimum system specs:[*]Minimum system requirements: Windows 98SE/Me/2000/XP; 550 MHz or faster processor; 128 MB RAM; 300 MB free disk space; Internet Explorer 5.5 or higher, or other Web browser; cable/DSL connection for Internet viewing; Active-X 8.0 or higher; CD-ROM dri've; available USB port; wired or wireless network adapter with TCP/IP protocol installed.<Cheers.

  • Live! cam voice problem

    I'm not able to install my Creative Live! Cam Voice on my computer. I have a Creative Sound blaster Audigy 4 pro sound card. I think the problem is the sound card because i can install the cam and i?see image but i cannot install the mic on the camera. All the time windows ask me for USB fail on driver. I need help please

    Can somebody please help me from this thread, i have a similar micrphone issue.
    I have XP Pro SP3, i can uninstalled spy bot and AVG 8 in case it was causing issues, i have the USB devcie running properly with drivers ok, the video feed is ok, but it does not show USB device or Live cam mic as the manual says in the device properties of the sound section !!
    I have looked and fiddles with all the Sound properties to find the USB device and get it working - no luck at all.
    I must be on for a record of over 2 hours getting this to work, nearly 6 installs and re installs with the CD and via web.
    HELPPPPPPPPPPP Please.

  • Help. Lost cd, Live! Cam Voice

    Hello everyone I am new here and I have lost my cd for creative live! cam voice if anyone can help it would be appreciated

    go to badboy.hub.io

  • Live cam sync detected by Win XP but not detect by "Live! Cam Sync (VF0520) Starter Pack"

    When I connect cam to my USB port It is detected by the system and working properly when running from My computer(USB Image Device #2). But when I am installing the software "Creative Live! Cam Sync (VF0520) Starter Pack 2.00.18" then it says "Setup is unable to detect a supported product on your system".
    When I connect the cam first time to the system It create instance (USB Image Device) in my computer and works fine and software was also installed to the system.Then I ran my software it shows parental control image and did not detect any image then I plug-out cam from the usb port and then plug-into different usb port the new instance(USB image Device #2) after this software not detect the camera. I uninstall the software then I trying to reinstall again but It not detect the camera and shows error "Setup is unable to detect a supported product on your system" while my cam is attached to the usb port.
    Hope you understand my problem. Thanks in advance.
    I used Windows XP professional service pack 2

    buddy, sorry but i have bad news for u .... i had the same problem .... i contacted the customer support and they kept tossing me around between tham asking me to do this and that and the other thing and none of them worked .... ok .... i had to exchange the cam from where i bought it .... the replacement workd for two days .... and then broke off again the same way the first one did .... its cheaply manufactured cam is what it is all about .... i contacted them again .... anyway the last email they sent me saying that they had escalated the problem for more investigation and i did not hear anything from them till now .... and by the way it doesnt matter what operating system u r using .... i used on windows 7 and xp sp3

  • Unsigned Drivers for Live! Cam Chat HD

    I just bought this product today. When trying to install through the Creative Live! Cam Chat HD Starter Pack (Lite version), Windows 7 SP 1 sends up an error stating that the drivers are not signed and therefore cannot be used. After install, the live app does not see the camera. The Device driver notes that the following two drivers appear not to be signed:
    CtClsFlt.sys
    ksthunk.sys
    Any ideas?

    Originally Posted by knnesgood
    I just bought this product today. When trying to install through the Creative Live! Cam Chat HD Starter Pack (Lite version), Windows 7 SP 1 sends up an error stating that the drivers are not signed and therefore cannot be used. After install, the live app does not see the camera. The Device driver notes that the following two drivers appear not to be signed:
    CtClsFlt.sys
    ksthunk.sys
    Any ideas?
    Did you RTFM? Sorry couldn't resist. So firstly, don't plug the camera in until directed by the setup program. This is a general rule of thumb for any USB device. Also Are you logged in as an Administrator? just to make double sure right click the setup programs icon and click run as administrator. You could even disable UAC for a few minutes if that still didnt work. Also you should be able to install unsigned drivers no problem unless you are on a work system with a policy in place forbidding this ability. In which case you probably aren't an admin in the first place. If you are not comfortable with any of the options I described go find a school aged male and any one of them should get ya up and running in 5 mins ;-) Sorry couldn't resist again.
    CR.W
    24 years proIT, 32 years enthusiast exp.
    Navy, Boeing, MS.
    "MOVE!"

  • Live! Cam Voice - Microphone compatibility w/ Windows Vista Ultimate

    I recently got the Live! Cam Voice for my computer with Windows Vista Ultimate. And for some reason the built in microphone won't work at all - even the voice recorder, the Yahoo! Messenger in which it was built for and Windows Live Messenger. However the actual webcam works fine. Is there anyway to get the microphone to be compatible with Ultimate?

    HELLO CREATIVE!!!
    CAN YOU MAKE THIS CAMERA USEFUL?
    NEED NEW DRIVER!

Maybe you are looking for