Creative Live wireless webcam - DDNS or any other outside access doesn't work

Bought the Creative Live Wireless webcam. Works inside my network, but DDNS server offered by Creative has been down for weeks now, so I can't use this service. The remote IP access also does not work, since the webcam doesn'y assign a remote IP (it states 0.0.0.0).
No support infor on Creative web page at all, they don't even list the product. I feel like this is all a big scam....
Can anyone provide insight in how to the this product to work?

Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

Similar Messages

  • I can not reactivate my DDNS service after having reinstalled my Creative Live Wireless Webcam

    Hi,
    After having changed my wireless router's network key, I had to change of course also the key
    stored in my Creative Live Wireless Internet Camera setup. To do
    this, I have deleted my cam definitions and did a scratch install after
    resetting. However now I can not register my URL name anymore and DDNS is
    disabled. The setup wizard says that it could not connect to the server to
    register my host name (in fact this name is already registered by me before) and that I should try again. I attempted numerous times, no help!
    The IP adress of my Creative Wireless Cam is 92.68..250, it is exactly the same as it
    was before. My registered URL was "goztepe.creativeddns.com" and remote monitoring?was working?
    with these parameters without any problem, which are still the same as before, I did not change them.
    How should I reactivate my DDNS service? Maybe a reset or something alike is needed on the Creative Server which is doing the URL registrations? I would appreciate any help because I
    am not able to access my cam from remote anymore!
    Thanks in advance. Ozgur Ozdemir

    Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
    If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
    Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

  • I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

    I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

  • On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error  Press Retry to try again... (49)". How can I resolve this?

    On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error  Press Retry to try again... (49)". How can I resolve this?

    Try logging out of the CC Application and restarting your computer. Also, try running the CC app as an administrator.
    Benjamin

  • Why do I have to allow or deny iTunes or any other software, access to the internet?

    Why do I have to allow or deny iTunes or any other software, access to the internet?
    I've had my MBP with Leopard since the summer of 2010. From then till this past spring, I have had my firewall on and when opening a program that needs internet access, such as: iTunes, Vuze, various office products, without a problem.
    Since this spring, each time I open the above software, I have give permission (allow/deny) internet access. So, this isn't a prolem really, I'm just curious why this is happening.
    Processor: 2.66 GHz Intel Core I7
    Memory: 4 GB 1067 MHz DDR3
    OS X 10.6.8

    Did you install Little Snitch (or Hands Off)?  It will post a dialog to allow/deny apps calling out if you don't allow it to record what it is to permanently do if it sees the same call again from the same app.
    Little Snitch will post a dialog with allow/deny buttons.  But there is also three tab buttons; once, until quit, forever. "Until quit" is the default.  So it won't nag about the same call again until that app quits but it will if you relaunch that app and the app makes the same call out.  Choose "once" will allow that one call to be placed but will cause LS to nag the next time that app tries to call even if you haven't quit.  Choose Forever and it will never nag again about that specific all attempt.
    You need to train LS which apps you want to permit calling out and which ones you never want to allow calling out.  You will of course initially be nagged quite often as you are seeing.  But if you train LS to always allow the ones you want to allow eventually there will be fewer and fewer dialogs since your habits don't change that radically in the way you use your own machine.

  • WIFI and mobile data connections not connecting with any other outside WIFI networks. Bluetooth not working in car. Any solution?

    After installed iOS7 I am facing the following two problems:
    1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
    2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
    Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.

    Check this thread, the same solution might work for you:
    http://discussions.nokia.com/t5/Nseries-and-Symbia​n-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-​...

  • Firefox crashing AND the scroll feature on my PC finger pad works with other browsers, but doesn't work on Firefox, which just happened since I updated. FRUSTRATING!

    Since I updated, Firefox is crashing daily. The finger scroll feature on my PC works with other browsers, but doesn't work on Firefox. It is also very, very slow, but other browsers aren't. I can't use it anymore until it's fixed.

    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default via the right-click context menu if they are user set
    *Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
    *http://kb.mozillazine.org/about:config

  • USB 2.0 Problem when installing Creative Live Motion Webcam

    I currently have a Compaq desktop PC running Windows XP SP2 with all the latest Microsoft patches. However, when I try to install the Creative Live Motion drivers, it warns me that the software components required to support USB 2.0 are not installed.
    As a result the Webcam will not function when plugged in directly to the USB 2.0 ports in the PC (either at the back or the front of the PC).
    However, if a plug in the Webcam via a USB 4 port Hub (running at USB .) it then works okay.
    Can any one please advise how I am suposed to upgrade the software on my PC to convince it to support USB 2.0 attached devices and why does the Webcam not function under certain conditions. Note that I have tried various BIOS configurations regarding its ability to support legacy USB - both Auto and Disabled.
    Thanking you in advance.

    I found answer for my problem from knowledge base, Solution ID # 7557.
    "Creative WebCam Live! Ultra, WebCam Live! Ultra for notebooks and Live! Motion may be incompatible with some ATI southbridge SB400 and SB450 products."
    And I have SB400...

  • Need help installing Live Wireless Webcam

    I got as far as where it says to disconnect the cable from your camera, and it said it was installed sucessfully. Then it asked if I wanted to go on to make the camera available on the internet, and I said yes. It asked for my camera admin username and password (which I had changed), and I put them in, and it just came back asking me for the username and password over and over again. I know I put in the right thing because I brought up the settings, and I saw it right there, had it open while typing everything in, typed everything in exactly. But it still wouldn't take it. It wouldn't take the default username and password either. Now the system won't even recognize that the web cam is there. I open up the software and it can't find any cameras.
    I can't call customer support because I work during those hours and there's no possible way for me to bring any part of this stuff to work, they don't even let you bring cell phones in.

    I think the Webcam Live! Wireless comes with 2 main apps.
    First is the Internet Center which is the app used to run remote monitoring. Second is the regular Webcam Center which is used when you have attached the webcam directly to the PC.
    I'm not really sure where your problem is coming from. But you will have to attach the webcam to the server and the server to the LAN if you are using Internet Center. Likewise, you will have to attach the webcam directly to your PC if you are using the regular Webcam Center.

  • I can't update my iPad to iOS 5 because when I plug the iPad up to my laptop or any other computer it doesn't detect the iPad, what's wrong?

    Every time I put the USB cord into my iPad and put in my laptop or any other computer it does nothing but says not charging on the iPad, I want to know why my laptop can't detect my iPad, and I updated iTunes don my laptop and I'm trying to update my iPad but can't, I can't even get certain apps because of this so please help

    Apple has stopped signing iOS 5.  You will need to update to iOS 6.

  • HT1212 IS THERE ANY OTHER WAY, IT DID NOT WORK

    I have tried the restore possibility on my ipod becasue we have forgotten our passcode. It did not work, is there any other options besides a complete reset?

    You have to restore the iPod.
    Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
    The Firmware Umbrella - TinyUmbrella
    If you don't have access to a computer
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • After editing a message in firefox (whether yahoo mail or any other app) the keyboard stops working and I just get an audio sound with any key stroke.

    This problem occurs with any page that requires keyboard input. If I make an errot in typing and have to go back or edit a sentence the keyboard stops working. THis only happens with Firefox and not with any other browser (Chrome, Safari etc)

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Creative live wireless Version :2.0.2.83.1_090805

    my firmware isVersion :2.0.2.83._090805 whats yours

    Your Mac only has 24GB's of free storage space. That will definitely slow your Mac down.
    Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Rule of thumb. Make sure there's at least 15% free disk space.
    Freeing space on your Mac OS X startup disk
    Also, open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/StartupItems
    Click Go the move the Sibelius7LicenceServer file the Trash.
    Also, if you aren't syncing a Blackberry remove the USB rim driver. Visit the Blackberry website for uninstall instructions.

  • HT1527 This suggestion did not resolve my problem. Any other suggestions that will actually work?

    I am unable to access the iTunes store even after installing the latest version of iTunes. My OS is Windows 7 and none of the solutions I have found online have resolved my problem. Anyone else having this same problem?

    Without details about the problem it's very difficult to offer useful suggestions, but try this:
    1) Click on your Start menu.
    2) Go to Accessories
    3) Right-click on the Command Prompt application and choose "Run as Administrator". 
    4) Once it opens, type in the following command...  
    netsh winsock reset
    5) hit Enter and it should say something like Winsock reset successful.
    6) Reboot your computer and try the iTunes Store again.
    Regards.

  • I'm getting the error "The Adobe Flash plugin has crashed" whenever I try and watch livestreams on Justin.tv, although any other content that requires flash works fine.

    I've tried uninstalling flash and firefox separately and neither helped.

    I cannot recall ever being this frustrated with my Mac and I have been faithfully using Mac for 20+ years!!
    I am currently using a Macbook Pro 2.3 Ghz intel Core i7 4GB RAM Mac OSX 10.7.5
    Problems encountered:
    Very slow browsers chrome, safari, firefox - have tried them all in hopes of finding one that works with no luck!!
    Adobe Flash crash error codes all the time.  I receive update request links from all three browsers asking me to update adobe flash software which I have done repeatedly numerous times with absolutely no success, just a waste of time and lots of frustration.
    Spinning rainbow sprocket is a common thing on my macbook, drives me insane!!
    I found this thread and followed the instructions to go into "System Preferences, Flash Player, selecting the Advanced tab, and delete all browser data and settings."  I then updated my Adobe Flash in my System Preferences, not the typical browser update method.
    So far, this method appears to be working - will keep my fingers crossed!!!

Maybe you are looking for