Creative Live

I have just bought the creative live 24 bit sound blaster usb thing, which comes with a remote control - the program that is on the cd is rubbish but i find the controller really useful - i was wandering if there was anyway of getting itunes to respond to the romote?

Hi Grant,
This page says it has a Note (1) on the USB Video Class info that it only applies to Windows XP Service Pack 2
This Page at Ecamm for their camera guide does not even mention it. (it may be a new version and the list is not exhaustive).
I can not see it comes with an On/Off Switch - although it can be twsited into a "Down" Position to be Off. It would be worth checking this.
Does it show up in her System Profiler ?
The Blue apple icon > About this Mac > More Info Button
Click on the Hardware reveal triangle > USB
If it is truly UVC compliant then it should work.
1:53 PM Friday; September 7, 2007

Similar Messages

Creative Live Vista IM (VF0420) Problem, PLEASE HELP!

Hi
I use Freetrack to play Airplane Combat Simulators, it's a program that uses the WebCam and a hat with 3 LED to simulate the head movement inside the cockpit.
I'm using Creative Live Vista IM (VF0420) installed the CD drivers and it works perfectly with the Freetrack and all the other programs.
Recently i've bought a Joystick (Saitek Aviator), so I installed the drivers on the CD plugged in the Joystick and it was also working perfectly.
The problem is that now the camera it's not working and the only way to get the camera working is to unplug the Joystick and restart the computer.
After the restart I tested the camera and it was working ok, but again, just after I plug in the Joystick the camera freezes the image and stops working until the next restart with the joystick disconnected.
Resuming, this camera only works when the joystick is disconnected since the computer restart. LOL
I'm using Windows XP 32 Bit + SP2
I tested with other webcam (also Creative) and had no problems working with Freetrack and no conflicts with the Joystick.
I see no conflicts on the Device Manager.
Anyone with the same problem or with the solution please reply.
Thank's in advance.

buddhika wrote:
Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
I have questined creative support but no answer.
Please help me !!
If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
Disable the Creative CD-ROM detector (service).
jutapa

Creative Live wireless webcam - DDNS or any other outside access doesn't work

Bought the Creative Live Wireless webcam. Works inside my network, but DDNS server offered by Creative has been down for weeks now, so I can't use this service. The remote IP access also does not work, since the webcam doesn'y assign a remote IP (it states 0.0.0.0).
No support infor on Creative web page at all, they don't even list the product. I feel like this is all a big scam....
Can anyone provide insight in how to the this product to work?

Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

Error while trying to install creative live central in Win 7

I get the following error message when I try to install creative live central on Windows 7 Ultimate X64.
Please insert disc 1 with file 102002536
Path: C:\Windows\temp\CRF004\LCentral *browse button*
Anyone know what this is about? It's very annoying.

Oh really?

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
I have to use external microphone from Logitech now.
I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
It looks like the drivers for Windows 7 are wrong.

hey Killthebeeping,
if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
let windows install its generic driver.
once done plugin your usb mic and test it again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

How to install presets purchased from Creative Live? [Question]

I purchased a set of presets from Creative Live, and can not install them as instructed. I have Windows 7, AdobeCC, when going to user's file then to the only file with "Roaming" is under Public, then to Roaming, Adobe-shows only Extension Manager 2-Illustrator CS4. This is not what the instructions say at all anywhere! I have tried to make a folder on Desktop with the included presets, then tried to load them into PS, edit import/export and nothing happens. Please help I have contacted Creative Live re this & they said they cannot help & others have had no issues.
Message was edited by: TLEIDIGH

What happens when you try to go to “%APPDATA%” in Windows Explorer? I would expect the Roaming folder exists for every Windows Vista/7/8 user, not just Public, but the AppData folder, itself, is hidden, so you may not be able to navigate with clicks in Explorer, unless you turn on the viewing of hidden folders:
http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/

Compatibility with Creative Live Ultra (notebooks)

I run a HP Pavilion ze2000, will I be able to use the Creative Live Ultra without problems like on the TOshiba Sattelite notebooks? I have usb 2 port and I surpase/meet all recommended requirements.

hi bro try webcamXP its better, try it out! take a look @ my website and see the webcamXP @ work,http://www.gibconnect.com/~gibraltarldm/ldmcam.html :smileyvery-happy:

Need help with installation of creative live webcam

I installed the creative live webcam..it seems like everything went fine. I turn it on and can see myself,but when i go onto a website i cannot get anyone to see me.Am i doing anything wrong or is there a trick to this that i do not know about,Please help..thanks alot.

could be your ip address when you log off and come back your ip is not the same! use

USB 2.0 Problem when installing Creative Live Motion Webcam

I currently have a Compaq desktop PC running Windows XP SP2 with all the latest Microsoft patches. However, when I try to install the Creative Live Motion drivers, it warns me that the software components required to support USB 2.0 are not installed.
As a result the Webcam will not function when plugged in directly to the USB 2.0 ports in the PC (either at the back or the front of the PC).
However, if a plug in the Webcam via a USB 4 port Hub (running at USB .) it then works okay.
Can any one please advise how I am suposed to upgrade the software on my PC to convince it to support USB 2.0 attached devices and why does the Webcam not function under certain conditions. Note that I have tried various BIOS configurations regarding its ability to support legacy USB - both Auto and Disabled.
Thanking you in advance.

I found answer for my problem from knowledge base, Solution ID # 7557.
"Creative WebCam Live! Ultra, WebCam Live! Ultra for notebooks and Live! Motion may be incompatible with some ATI southbridge SB400 and SB450 products."
And I have SB400...

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to your site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroo

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to the Adobe site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroom CC.

Yes, it looks like they've screwed up. Some people have been able to update CC to LR6, some people get half way through the download and it fails, some people (me included don't get any option to upgrade to LR6 in the CC app... It's all very annoying. I tried the help chat, and I got "log out of the CC and try again in 2-3 hours". Well, that was half an hour ago, but I'm not holding my breath for getting LR6 today.

[Solved]Webcam Creative Live not working

Hi,
I think there's a problem with one of the latest updates, my webcam was working fine since before
myself@Desktop ~]$ dmesg |tail
usb 2-2: USB disconnect, address 3
gspca: disconnect complete
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
gspca: probing 041e:4064
ov519: I2C synced in 0 attempt(s)
ov519: starting OV7xx0 configuration
ov519: Sensor is an OV7670
gspca: probe ok
gspca: probing 041e:4064
[myself@Desktop ~]$ spcaview
Spcaview version: 1.1.8 date: 25:12:2007 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: No such file or directory
[myself@Desktop ~]$ xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.30-ARCH)
xinerama 0: 1280x1024+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
My webcam is a Creative Live IM Vista. Also the sound recorded plays back faster than I recorded.
I've noticed that if I login as a root on KDE4 then xawtv will play fine,
su -c Skype
but skype will shows only green test's display and crash after a while.
F
Last edited by TheSaint (2009-10-05 17:07:55)

groups
disk lp wheel locate http games clamav dbus hal network video audio optical floppy storage scanner camera power users
I made an Arch installation on USB which isn't affected by this sort of problem. Unfortunately I'm not able to find the differences to trace the flaw.
EDIT
Partially solved:
Nvidia packages block the normal user access to /dev/video*
LAST EDIT
Found the issue, Must set a environ variable XLIB_SKIP_ARGB_VISUALS=1. Then I appended to /etc/profile.d/xorg.sh. Also mentioned in this thread
F
Last edited by TheSaint (2009-10-05 17:13:33)

I can not reactivate my DDNS service after having reinstalled my Creative Live Wireless Webcam

Hi,
After having changed my wireless router's network key, I had to change of course also the key
stored in my Creative Live Wireless Internet Camera setup. To do
this, I have deleted my cam definitions and did a scratch install after
resetting. However now I can not register my URL name anymore and DDNS is
disabled. The setup wizard says that it could not connect to the server to
register my host name (in fact this name is already registered by me before) and that I should try again. I attempted numerous times, no help!
The IP adress of my Creative Wireless Cam is 92.68..250, it is exactly the same as it
was before. My registered URL was "goztepe.creativeddns.com" and remote monitoring?was working?
with these parameters without any problem, which are still the same as before, I did not change them.
How should I reactivate my DDNS service? Maybe a reset or something alike is needed on the Creative Server which is doing the URL registrations? I would appreciate any help because I
am not able to access my cam from remote anymore!
Thanks in advance. Ozgur Ozdemir

Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

Creative Live Motion - Vista - no pan and tilt softwa

Everything seems to work. The driver installed perfectly and the webcam center also. Did anyone find or download pan and tilt software for this webcam for vista thanks much

Have found another used Creative Live Motion cam. I guess the one I have has got some malfunction.
Trying to replace some part of my new one from the donor old camera. Will post the result with pictures.
For all the people experiencing extremely slow frame rate, a non-documented and not known fix is simple. Just disable the Auto Exposure checkbox in the camera settings first tab and see the smooth results. Manually adjust the exposure to a reasobable value according to camera placement and enjoy.
Say thanks if your problem is solved.
Thanks.

Alternative Download Links For Creative Live! Central 3

Below are three alternative download links for the Creative Live! Central 3 software released on 4 February 2014.
The file name is LC3_PCAPP_L17_3_01_28.exe
The links are here:
Link 1
Link 2
Link 3

I was trying everything I could think of on my end to download the InDesign trial from this link:
http://prodesigntools.com/trials2/AdobeProducts/IDSN/8/win32/InDesign_8_LS16.exe
I must have tried it a hundred times using every browser, download manager, login, logout, whatever. At one point the server sent me a 1.2 MB file that was corrupt, but on all other attempts it just errored out. The current response entity is:
Access Denied
You don't have permission to access "http://trials2.adobe.com/AdobeProducts/IDSN/8/win32/InDesign_8_LS16.exe?" on this server.
Reference #18.6daeacd.1343153129.1c78627
When I switched to the 7zip file and after many more attempts it finally downloaded. The exe link never worked.
I don't know if this is a security thing or a failed server but it is not a good way to distribute software either way.

Creative Inspire 6.1 6700 with Creative Live! 5.1 soundcard?

I have a Creative Inspire 6.1 6700 with Creative Live! 5.1 soundcard, but the front-middle speaker does not work!
It's not the speaker self who is defect, I test this by switchging the connector on the subwoofer with the rear-middle, then the front-middle is working right.
I have switched to 5.1->6.1 on the subwoofer.
What can cause these problem?
Audio cables wrong connected to the audio-card?
I use Windows 98SE as O.S.
thanks in advance!

Gaitje
Try enabling the CMSS feature of your 5.1 Live! sound card, You could refer to our Knowledge for more information on CMSS.
http://us.creative.com/support/kb/ar...p?l=2&sid=4883
Jason

Creative Live

Similar Messages

Maybe you are looking for