Creative Media Lite problem

C I have this problem when using my mp3 player software, Creative Media Lite. I have connected my Zen Stone Plus (with built in speaker) to my computer so i could charge it, and when i tried to start Creative Media Lite i get this error: "The parameter is incorrect".
I've used the program earlier and it worked fine.
I'm using Windows XP if it's important.
What should i do?

http://forums.creative.com/creativel...d=49936#M49936

Similar Messages

  • Can't install Creative Media Lite - Clash with Windows XP Home SP

    Zen Stone GB. Firmware: .6..
    My PC: AMD Athlon 3200+, Windows XP SP3, IE7, Windows Media Player .0.572.5230
    Can't install Creative ZEN Stone Starter Pack ..08.
    When InstalShield runs I get the following message:
    >SetupDLL\SetupDLL.cpp(298)
    PAPP:Creative Media Lite
    PvVENDOR: Creative Technology Limited (www.creative.com)
    PGUID:A99CB37-AEBO-492F-A85A-8A2536D22393
    $9..0.429
    @Windows XP Service Pack 3 (2600) !E 7.0.6000.6640
    Followed by Error Code 5002.
    I've check that my system spec. meets Media Lite requirements and suspect a clash with XP SP3.
    Any suggestions on how to complete the installation of Media Lite will be much appreciated.

    Here's 2 messages from Creative Customer Support. Looks like there may be a clash with SP3 so, 'Come on Guys', let's get it fixed.
    I will be forwarding this to our ASG, and we will be looking more into this matter. And we would probably have a patch released for this issue in the near future. Best Regards,Creative Customer Support ServicesCreative Labs Europe
    I was able to talk to our Advanced Support Group (ASG) regarding this issue. And according to them, that it might be possible that SP3 would be the reason why you are unable to install the Creative ZEN Stone Starter Pack. According to our ASG, that the main difference between SP2 and SP3 is network security feature called Network Access Protection, which scans the integrity of a computer before connecting to a corporate network, which is absolutely useless for end users at home. As being one more security feature in Windows XP, this can possibly cause various problems with multimedia applications.
    Best Regards,Creative Customer Support ServicesCreative Labs Europe

  • Zen Stone not detected by creative media lite or

    My Zen Stone has just begun not to detected by creative media lite or WMP. I'm so frustrated as its been working great. I charged it using my plug in charger, and the green light was on, steady, meaning, i think, its fully charged.
    But when plugged into the pc its blinking on and off in a red light, meaning I think the battery isn't charged.
    What's going on? can anyone help me!

    My Micro did that last night. I used WMP beta 2 to transfer some files, just to see how it worked, and now the Creative Media Explorer won't see it. Funny thing is that right about the CME, is the listing with my players name. I can get into my player through that ...reinstalling the CME right now...will let you know the outcome...
    That fixed it right up.
    I hope that someone from Creative is watching all this mess with firmware/software problems and WMP and sorts it all out when WMP goes gold.Message Edited by zenwerewolf on 09--2006 04:24 PM

  • Download Creative Media Lite for MuVo T

    I just got my MuVo T200 yesterday, and somehow accidentally deleted the software for Media Lite. I can't find where to download it...can someone help me?

    http://support.creative.com/Products...me=MP3+Players
    Try This one I listed. If that doesn't work go to the top of this page and go through Support/Downloads/MP3 Players and then click on bottom of screen where it asks if your player is not listed. Then it will allow you to go to Muvo T 200 and all the downloads for it. You Creative Media Lite package is at the bottom of the list.
    luvmyrescuedogs

  • Creative Media Lite - your opini

    Hi guys,
    I am about to jump on the bandwagon and finally get a ZEN player, ZEN Stone Plus
    (should you ask) Not a big deal - it is relati'vely cheap, still I want to be sure that I am getting the right product.
    I saw a good few reviews and have no doubts about the player itself - seems great to me.
    One thing that I cannot find any information on is the software - Creative Media Lite.
    I would just download it and play around with it but it would not install without the player. So here is the deal:
    - How do you find Media Lite?
    - Is there something this software does exceptionally well or exceptionally bad?
    - Is it a hog on resources like iTunes perhaps or is it clean and tidy?
    - Will it tag mp3s while ripping?
    - Will it clean existing mp3s (add tags etc)?
    Many Thanks in advance
    FinkerMessage Edited by Finker on 09-07-200705:55 PM

    No-one ever used Media Lite here?
    If you did:
    > How do you find Media Lite?
    > Is there something this software does exceptionally well or exceptionally bad?
    > Is it a hog on resources like iTunes or is it clean and tidy?
    > Will it tag mp3s while ripping?
    > Will it clean existing mp3s (add tags etc)?

  • Creative Media Source problem with removable hardd

    Hi,
    I have my mp3 files stored on a external harddisk, using the following folder structure:
    f:\mein musik\artist\ album\*.mp3. The problem I have is that the Creative Media Source program keeps forgetting that my "mein musik" folder contains the mp3 files that I'd imported before in my "PC Music Library". Just for info: I "told" Media Source to keep the PC Library in folder f:\mein musik.
    Every time I restart my PC, the PC Music Library shows no mp3 tracks at all, even though my external harddisk is connected. This is of course extremely annoying because it takes many minutes before my +/- 3000 mp3 tracks are imported again.
    What could be he cause of this problem and how could I overcome this? Would I need to use for my PC Library a folder that is located on my "normal" internal harddisk?
    Many thanks in advance for your help,
    Tom

    I believe the Media Sniffer feature of your MediaSource is enabled to sniff your external hard disk folders. Try disabling the sniffing of your external hard disk.

  • Cant install creative media lite for zen stone plus

    my sister got the zen stone plus as a gift and I am trying to install it for her,since she doesnt know much about computers,thing is on the instructions it says I should go to www.creative.com/zenstoneplus and when I do I choose the language and then download,well the .exe downloads,but when I try to run it opens a self extracting thing and then gives me an error message!!
    the error numbers have been -6003 or -5002 and then nothing happens,I tried downloading it with firefox and internet explorer,but I get the same result!
    any help she's desperate!

    have you checked the requirements of the media lite? does your sis' pc satifies those requirements?

  • Creative media source problems!!! plz h

    I am having issues with the creative media source program.
    every time i attempt to transfer mp3 files to the player the program crashes and i have to close the program and start over. i get one file on ok but after that it crashes. i cant find an update to the program on the website. please let me know what i should do
    thanks.Message Edited by chefschafer on 2-03-2004 06:53 AM

    I am also having the same problem and I thought about reinstalling Media Source (I have thet latest version), my only fear is that I have almost 3000, which are backed on an external dri've, but these songs are all?TAGGED, rated and?all have album art, am I going to lose all this info if I reinstall Media Source?Also, do I have to uninstall first and then reinstall and just install over the previous version?

  • Creative Media Source - Problem adding a song to playl

    I created playlists for my Zen Vision M using Creative Media Source. I did not use the PC Library but rather used the player as the source and created play lists. I have successfully added songs to the playlists over the past several months. Yesterday when I added a song, it replaced the entire playlist with the one song that I was adding. I tested several more times by creating new playlists and the same thing happened.
    I can accomplish the same thing using the explorer but prefer Creative Media Source. Has anyone had a similar experience? Any advice?Thanks. Jay

    Try download and install the latest MediaSource 5.0.38 and the MediaSource plugin of your ZEN Vision:M. Creative MediaSource 5 and its various plugins are now officially available for download at your respecti've product download sites. The main Creative MediaSource 5 Player/Organizer:
    Creative MediaSource Player/Organizer 5.0.38 (22 Dec 2006)
    For mass storage series ZEN/Muvo players:
    Creative Music Player (Mass Storage Series) Plugin 5.0.07 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For PlaysForSure ZEN players:
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For non-PlaysForSure NOMAD/ZEN players:
    Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer (27 Dec 2006)
    For CD Burning function:
    Creative CD Burner Plugin 5.0.3 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For selected DTS supported Sound Blaster cards:
    Creative DTS Neo:6 Plugin 5.00.05 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)

  • CD Ripping Settings in Creative Media L

    Hello, everyone.
    When I open Creative Media Lite and go to the "Rip CD" option with the intent of ripping a CD to my hard ri've, all the traks on the CD should be selected by default. Lately, however, they are all deselected. In adition, although the "My Computer" checkbox is checked, the "Device" checkbox is checked also. I'm not sure what I did to produce this problem. I can manually change these settings on the fly, of course, but I would much ratehr they came up by default as they used to. Can someone offer some help, please?
    Thank you.
    Craig

    Recording level is not used when ripping CDs.

  • Accessing Networked drive through Creative Media L

    I am just about to load my 2nd Zen Stone (the first died at birth) and cannot access my Ripped CD's as they reside on a networked dri've. Anyone know a way round using Creative Media Lite (Version .00.08)?Regards?Tony

    the appletv can access a shared itunes lib of a computer turned on and running itunes with a shared lib
    the appletv can be used as airplay speaker for audio and video by a compatible mac or ios device
    the appletv can by no other means play or access any sort of movies or musik from your local network
    where the media is stored in terms of the itunes lib is irellevent for the appletv it can be stored on a nas or on a 5-1/4 floppy disk the appletv knows no difference it only get the interface itunes shared lib present to it

  • Problem with a patch for Creative Media Explorer for Ze

    Has anyone had any problems with their PC (rebooting itself after install and getting a blue screen) when downloading and installing the update for Creative Media Explorer for Zen M to fix the album art problem for WMP?I downloaded this update per a response I got to thread here:http://forums.creative.com/creativel...ssage.id=79299?I downloaded the patch to update Creative Media Explorer. I was going to upgrade WMP to after that?but my PC got stuck at the startup screen during boot up. The hard dri've light indicator was on solid also. I thought maybe the dri've had died since I have had it for quite some time now. I took the dri've out and put it in an external enclosure I have that connects via USB. I was able to get into BIOS and set the boot order to boot from a USB dri've. When it started to boot up, it looked as if it was going to come up but it didn't. I seen a flash of a blue screen and the PC rebooted itself. I'm wondering if the update is causing the OS to hose up on start up. That's why I'm just wondering if anyone has downloaded this update with any problems. The update can be found here: http://us.creative.com/support/downl...ype=3&x=40&y=7. It is number 5. I'm currently defraging my dri've and I am somehow going to try and repair the OS if I can and uninstall Media Explorer and reinstall. Oh one other thing, it will not boot into safe mode either.

    I downloaded the patch and installed it on my PC and everything worked like a charm, and right after that my music started showing Album Art.However, I still didn't replace the new firmware on my Zen Vision M (.6) and I wonder if I should, since everything seems to work wonderfully well at this point?

  • Creative Media Source 5 Install Problems

    (Creative Media Source 5 Install ProblemsM I've looked through some of the other install issues and can't seem to find my problem, but apologize if this is somewhere I did not find... I had installed and have been running CMS5 on my desktop for a while. Recently I had to reformat my hard dri've and reinstall Windows from scratch. Upon trying to install CMS5 on my Windows XP SP3 system, I got a bunch of errors basically saying something to the effect of "Installation is unable to continue because of one or more unresolved issues....."? Then it lists a file TagMgru.mft. After cancelling that error, they continue to come up for Id3Tagu.mft, WmaTagu.mft, OggTagu.mft, Mp4Tagu.mft. The error message comes up twice for each of the listed files, and then the installation does not complete. Any ideas? I was using an install file downloaded from Creative's [email protected]

    Cheese32 wrote:
    Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
    I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
    ps.
    If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

  • Audigy LS software problem: Creative media Source doesn't function correc

    Since I reinstalled the creative media source software, some applications doesn't function any more. These are: EAX-console, speaker settings and diagnostics. Does anybody know, how to solve this problem or if there is any other way to configure the 5. speaker system?
    best regards
    creativebMessage Edited by creativeb on 02-5-2005 03:47 PM

    Try posting this topic, in the Soundblaster Audigy forums..

  • Problems installing Creative Media Explo

    I just purchased the Creative Zen 8gb flash player. The box lists system requirements: Windows XP (Service Pack 2) which I have. However, when I went to install the Creative media explorer an error message came up: Not compatible with Windows versions older than 2005. I know I'm working with an older windows version and that's why I check the system requirements prior to purchase. Creative seemed to leave out that the windows version needed to be 2005 or newer. My windows version is Windows XP media center with service pack 2. I went to the windows site and I states that my windows service pack 2 is up to date. The installation process with the CD that came with the player was also a disaster. Had to reboot 7 times and my system stated that windows had serious errors afterwards. I consider myself an medium to advanced technical computer user and can't imagine a person trying to do this with low technical knowledge. This shouldn't be this hard!
    Uggh... I'm quite aware that @pple sells 4 out of 5 MP3 players today. I'm starting to understand why now. If I can't get the player to communicate with my pc it is of no value to me and therefore will have to return for a refund and eat the shipping cost. That is, if Creative will refund as I haven't started that process yet. How frustrating

    I got the same problem. I might know the cause of this, I downloaded windows media player , it might have messed up some things.... However I really don't know how to fix this. Previous files could be converted but now I can't convert those same files anymore. And this was after I installed Windows Media Player , thats the only thing I can think of...

Maybe you are looking for

  • Could we have an IF statement within a CASE please in FMS Queries?

    What is wrong with this query please. It complains over Begin statement. select (case when $[RDR1.U_DepFeeState.0]='ON' then if ($[RDR1.UseBaseUn]='No' )     begin          t0.U_DepoistfeeON$[$38.10002117.377]1     end else          t0.U_DepoistfeeON

  • Word file not working after update to ios 7.1

    After I updated to ios 7.1 today, word attached in mail, fail to open.

  • Printing of export invoices

    Hello Experts, Printing of Export Invoices: 1)Presently only one copy of Export Invoice can be printed in one print command. The settings should be changed in a way that we could print more than one copy in one print command. 2)Certain Contract no. n

  • How to get/set scrolling position in Frame?

    Hello! Help me please! I need to remember scrolling position of frame before it's reloading. And restore this position after reloading. How can I do it? I Use JDk 1.4.1 Thanks beforehand! Denis.

  • Access external drive remotely through Airport Extreme

    My Airport Extreme (v 7.7.3) is setup at the office with a connected drive and everything works great as long as I am within the same network as the airport. How do I access the drive from home on a different network? Each time I get the error "Conne