Creative Media Source won't install

I just bought a Zen Microphoto and I was anxious to upload my songs on the forementioned player. However as I tried to install Creative MediaSource which I downloaded from this very site, I encountered a strange problem.
I clicked on the setup and my PC proceeded to extract the files, and when the setup screen loads up, there's a message saying "Looking for previously installed components" and there are two setup screens minimized to my taskbar (CMS web installer and Creative Media Source - Install Shield Wizard) Whenever I click either of them nothing will happen. I'm pretty confused about this.
I'm sure it's not my hardware because my PC is up to date and I never had problems of the likes. I browsed the forums for an answer and I've heard of a software conflict with quicktime, I followed the advices with no results. I'm pretty desperate right now and I can't wait to use my Zen MicroPhoto. Did anyone encounter a problem similar to this?

Hi MusicoftheNight-
I had a similar issue when downloading the PlayForSure software for my Zen Touch. What I ended up doing was something I found in another thread. Download the installer, then use Winzip or Winrar and make an archi've of it. Unzip or Unrar it to another folder and then go into each folder and run the setup icons individually.
This is the only thing that worked for me.
When I needed to update just Mediasource I installed it in safe mode.
My computer is up to date and everything as well but this is the only thing that worked. Good luck!

Similar Messages

  • Creative Media Source won't display tracks on Zen Mi

    When I hook up my Zen Micro, Media Source displays the music on the?Zen Micro in folders named by artist. Sub folders contain albums by that artist. The next sub foolders display track names. Can I change the settings so all of my tracks are shown as one list when I first choose the Zen Micro.

    I have been chatting to some others and it appears that it isn't a WMP problem. Having seen a thread re: Zen synch, I tried to play the music through the Creative player but the Zen is not detected on that either.
    In Windows XP I can see the Zen when I dock it, and I can see it in WMP, but it is not visible in the Creative Player?
    Any ideas, is it a case of uninstalling the Creative software?

  • Creative Media Source record volume level slider doesn't w

    I had an older version of Creative Media Source and a installed the latest version off the website to try to fix the problem, but the same thing occurs in the current version. I want to record, but the slider is grayed out and when I try to use it, the whole media source window moves, not the slider. It's stuck on zero. My sound card drivers are installed and working correctly. I can play music and adjust the playback volume. The record volume used to work. I don't know why it stopped.
    Any thoughts on how to fix this?
    Thanks,
    Russ

    Recording level is not used when ripping CDs.

  • Creative Media Source 5 Install Problems

    (Creative Media Source 5 Install ProblemsM I've looked through some of the other install issues and can't seem to find my problem, but apologize if this is somewhere I did not find... I had installed and have been running CMS5 on my desktop for a while. Recently I had to reformat my hard dri've and reinstall Windows from scratch. Upon trying to install CMS5 on my Windows XP SP3 system, I got a bunch of errors basically saying something to the effect of "Installation is unable to continue because of one or more unresolved issues....."? Then it lists a file TagMgru.mft. After cancelling that error, they continue to come up for Id3Tagu.mft, WmaTagu.mft, OggTagu.mft, Mp4Tagu.mft. The error message comes up twice for each of the listed files, and then the installation does not complete. Any ideas? I was using an install file downloaded from Creative's [email protected]

    Cheese32 wrote:
    Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
    I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
    ps.
    If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

  • Creative media source and Live!

    Does anybody knows what is list of selected cards that can use crossfading in Creative media source?
    Why Li've! 5. cannot? Not even EAX?
    Thanks in advance

    If you have the newer 24-bit versions of the Li've cards then disregard the following.
    Perhaps you've installed some of that updated modded stuff? (I've tried it at times too, but always returned to the official 252 driver/software Uni-Pack stuff.)
    The software you've got is not designed for the Li've series of cards. If you used the official cd's for the Audigy 2 series (not ZS), it all works as long as you choose not to install EAX Console and Speaker Calibrator. You should also not install MediaSource Player, choosing instead the PlayCenter 3.02.52 and , on XP, updating it to 3.02.70.
    You'll probably need to use the ctcomp.exe (search) on the Audio\language\Setup\Setup.exe file. So you'd need the cd copied to a folder on your harddri've so you can let ctcomp adjust the files.
    Then you run AudioHQ and choose to run on startup and load in systray in the options dropdown and use the EAX Control applet to control your effects. The AdvancedEQ effects work as long as you choose the effect, click the ParametricEQ in the center, then tick the volume slider tab with your mouse, exit and save. You need to do this everytime you apply an effect.
    Or, you can install the U-UPAX stuff which has been modded (driverheaven forum for links). I believe MediaSource works with their setup.
    I'm telling you though, your card will not give you any extra stuff it is not hardware designed to provide. So, you still only get EAX and 2, no Advanced HD EAX 3 or 4.
    And, the sound quality for music is superior with the official 252 Li've Uni-Pack setup. Unless you like overwhelming, booming bass and the midrange missing sounds. Those updated Audigy 2 and up drivers may have settings and files for the Li've, but they are tuned for the Audigy 2 and up.
    The 3 best optimizations made for the Li've were the old Li'veware 3.0 vxd drivers, the APS mod for the Li've (both for 9x), and the kXProject drivers (for XP). By far the most problem free software package was the Li've Uni-Pack. And it sounds okay.
    So there you go. Now, if after you uninstall whatever you've got, the setup file of the package you select doesn't say "No SoundBlaster hardware installed" you'll be lucky. Modern Creative drivers oftentimes remove something when uninstalled that messes up the hardware detection and if installing with CTZAPP doesn't magically let the software setup recognize the card again then only a format will fix it.

  • Creative Media Source Prob

    Whenever I transfer albume to and from my Zen V Plus, Media source insists on adding the album title to the song name. This makes very long titles which can't be easily read in the Zen V. I have tried a number of transfers, and media source always appends album names to song titles. Is there a way around this, or is this Creative Media Source bug. It's a real pain to have to edit every title on every transfer. Thanks for any clues.My Zen V firmware and Media Source software are up to date.

    Which mediasource did you download? I believe you have downloaded the mediasource installation mean for their MP3 player and that's why you cannot install. Their sound card mediasource don't have any standalone installation as far as I know. If you need, you will need to install the mediasource from your installation CD. If you don't have the installation CD, you can download the ISO CD image here.
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8433

  • Creative Media Source Player not fo

    Hi... I am lost & confused!!!! I purchased a new hard dri've & motherboard. I reinstalled my audigy 2zs card & loaded the install disk. To my suprise media player did not load...in fact I can't even find it on the original install disk!! I used the media player all the time and even plugged in my old hard dri've and behold..media player was on that hard dri've!! Can anybody tell me why it is not appearing on the original install disk whenin fact it was there when I loaded it the first time I purchased the card? It appears everything else will load off the install disk EXCEPT media source player.

    There are differences in the details of how the various Creative soundcards work, and it would help me if I knew which one you have. I get the impression it came in the computer, and you don't actually know the answer. Where exactly are you trying to select what u hear? The Creative Media Source Player program (I've not used it, but it seems odd for a "player" program to do recording)? The mixer program? Which mixer, Windows or Creative's?
    -Dave
    [email protected]

  • The launch feature of Creative Media Source 5.

    I need to clarify my question. I was able to install components of the latest version of Creative Media Source 5 from the WEB. All but the Go! feature seem to work OK!? Am I missing something or am I doing something wrong? I hilight that section in the menue bar but nothing happens. Can anyone help me with this issue?

    Cheese32 wrote:
    Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
    I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
    ps.
    If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

  • Creative Media Source 5 SVM Time Scale Clean Up Prob

    hi, im Using the Creative Sound Blaster Li've! 24 Bit sound card and using Creative Media Source Player 5 to play my?audio and video files. I get a problem, however, when i start to play a song from my Library,?The first message reads(this is when i double click to song to play it): Exception --CreateObject : Exception:ObjectNotFound? from:CTimeScaleFilter Message:"Could not load Time Scale Filter" (after that message it tells me when this problem happened)?The second one reads(after i click ok): Exception --CreateObject : Exception:Undefined? from:CNoiseReductionFilter? Message:"Could not load Noise Reduction filter"? (and then the time it happened)?Third Message reads: Exception --CreateObject : Exception:Undefined? from:CSvmFilter? Message:"Could not load Time Scale Filter" (and then the time it happened)?does anyone know why this happens when i play a song from my playlist or otherwise? and right after i stop playing the song, i can click on the time scale, svm, and clean up like nothin happened, i can change the settings and what not....its really starting to tick me off because it Just worked, and then i closed out of the program and started it back up again, and now it Doesnt work, please help, and it would be awesome if i could fix it without reinstalling the sound card, its drivers, and the like...

    Ok, followed your instructions, installed media source direct from the cd from explorer from directory CMS/Setup to the setup.exe file. Intall took longer this time, but, still no Creative Media Source installed -
    still have the same problem. Still need more help.

  • Creative Media Source - Problem adding a song to playl

    I created playlists for my Zen Vision M using Creative Media Source. I did not use the PC Library but rather used the player as the source and created play lists. I have successfully added songs to the playlists over the past several months. Yesterday when I added a song, it replaced the entire playlist with the one song that I was adding. I tested several more times by creating new playlists and the same thing happened.
    I can accomplish the same thing using the explorer but prefer Creative Media Source. Has anyone had a similar experience? Any advice?Thanks. Jay

    Try download and install the latest MediaSource 5.0.38 and the MediaSource plugin of your ZEN Vision:M. Creative MediaSource 5 and its various plugins are now officially available for download at your respecti've product download sites. The main Creative MediaSource 5 Player/Organizer:
    Creative MediaSource Player/Organizer 5.0.38 (22 Dec 2006)
    For mass storage series ZEN/Muvo players:
    Creative Music Player (Mass Storage Series) Plugin 5.0.07 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For PlaysForSure ZEN players:
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For non-PlaysForSure NOMAD/ZEN players:
    Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer (27 Dec 2006)
    For CD Burning function:
    Creative CD Burner Plugin 5.0.3 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
    For selected DTS supported Sound Blaster cards:
    Creative DTS Neo:6 Plugin 5.00.05 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)

  • Creative Media Source takeover attem

    I have a Zen V Plus, use Windows XP, and have Creative Media Source and Windows Media Player on my desktop. I use Winpatrol to monitor my startup activities, and lately it has been popping up a msg that says Creative is trying to become the default .MP3 file association. I use Media Player for managing my music and audiobooks. I keep telling Winpatrol to not allow the change, but I would like to know how to get the attempts to stop. The wonderful folks at Creative customer support? have told me that my free period has ended, but they would be happy to take my money and attempt to give me an answer. They are not going to get any.

    Cheese32 wrote:
    Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
    I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
    ps.
    If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

  • Creative Media Source + Windows XP Media Cen

    I have always used the Creative Media Source as an audio player and as a method of creating playlists etc.
    I just recieved a New Dell XPS400 with a Dell installed Soundblaster X-Fi Extreme Music card. This machine has WinXP Media Center Edition installed as an operating system, for which I did a clean re-install. In reistalling the software from the Creative disk that was supplied with the computer I noticed that Creative Media Source was not included as part of the package. I further noticed that the in the download section of the website that this isn't an available download for the Win XP Media Center OS, even though it is available for Win XP Home edition.
    Is there a compatibility problem in using the Creative Media Source with this OS ? Is there a conflict with the other Creative software that is typically installed with this card? In case it makes a difference; in playing back wav and mp3 audio files I am not interested in opening up the Win Media Center interface in order to play those files or create playlists, I simply want to associate those audio files to open and play with the Creative Media Source as I have always done with previous versions of Windows XP.
    Thanks for any advice and clearification !

    Hi m8. Just install the Windows XP version (Professional), and it will work, as I use Creative Media Source with Windows Media Center 2005, no problems. After, try the "product update" under support on the creative site, to see if there are any new things to update, just incase.
    cause_of_chaos

  • Creative media source problems!!! plz h

    I am having issues with the creative media source program.
    every time i attempt to transfer mp3 files to the player the program crashes and i have to close the program and start over. i get one file on ok but after that it crashes. i cant find an update to the program on the website. please let me know what i should do
    thanks.Message Edited by chefschafer on 2-03-2004 06:53 AM

    I am also having the same problem and I thought about reinstalling Media Source (I have thet latest version), my only fear is that I have almost 3000, which are backed on an external dri've, but these songs are all?TAGGED, rated and?all have album art, am I going to lose all this info if I reinstall Media Source?Also, do I have to uninstall first and then reinstall and just install over the previous version?

  • Virus in Creative Media Source 5?

    !Virus in Creative Media Source 5?( Hi all. I just installed Win 7 Pro on one of my PC's and the second thing I did after installing video drivers was to install Danial K's pack (thanks Danial) for my X-Fi Fatality card. All was good. Then I installed Avast anti virus. All ok. Then I downloaded Creative Media Source 5 Player/Organizer 5.26.02? and when I installed it avast detected a virus!?! Ok i thought it was just a bad download. I tried again and when I installed it Avast warned me of a virus in it again. After I uninstalled it again I installed everything else I like Office, winrar, Nero, ect. Then I did a system scan and no virus. So I tried one more time. I downloaded Media Source 5 from Creative site, installed and BAM a virus was detected in Creative media source!? What could be going on? Any ideas?
    Thanks

    Simple, false positi've. You really think Creative would include a virus in any of their files? Either put the file in the ignoer list, or disable Avast until after installing MS5.

  • How do you Interface Zen Vision M with Creative Media Source 5 in WIndows XP?

    I am having problems getting the Zen Vision M player to interface with Creative Media Source5 in Windows XP with Service Pack 2.
    It does show up in the Device Manager System as a Portable Device and shows it working correctly.
    When I try to download one of the updates for Media Source 5 it will not install "player not found message"
    So now how do I get it to work with the Creative Media Source? It does not show this player at all.
    Just a note: I did get this player to work in Vista 64 and interface with Creative Media Source 5 but could not download Creative Explorer with Vista 64.

    Well thanks again!!! I must have downloaded the wrong file think it was the 38 version. I downloaded the 36 version and it works great!!!
    I think everything is working on both computers. Im glad because I bought another Vision M from someone on HardForum.
    One of the two might work for a Christmas present for my wife. Now we can get rid of our old Rio Players.

Maybe you are looking for