Creative MediaSource question

I have Creative MediaSource 5 (5.0.25) on my new laptop that runs Vista. My old XP-based laptop has version 3.30.35 My options in the older version of "Select Recording Source" include 3 choices in addition to Mixer. Version 5.0.25 only lists "Follow Mixer Settings." How can I get the other options on here? I used my old laptop to edit recordings I made to pull out the necessary parts as highlights. When I try that on my new laptop, I'm only recording what the laptop's microphone picks up in real time. I'm looking for the "S/PDIF In" option because that's what I used before.
Manythanks for any help you can offer.

There are two places.
- View your PC Music Library content in MediaSource Organizer. At the top of the content panel, you should be able to see the Import button to allow you to import tracks to your PC Msuic Library.
- View your MP3 player content in MediaSource Organizer. At the top of the content panel, you should be able to see the Import button to allow you to import tracks to your MP3 player.

Similar Messages

Technical question about Creative MediaSource 3.30.21‏

Hello:
I use Creative MediaSource software to manage my Creative MP3 player. When I hook up the MP3 player using the USB cable, I can play songs in the "player" within the MediaSource organizer. How do I set it so that the songs (which reside on the MP3 player) will play on my computer speakers (not through the MP3 player)?
Im summary, when I play a song that li'ves on my computer, it plays through the computer speakers, but songs that li've on the MP3 player play on the MP3 (even though I'm controlling them via the MediaSource software). How do I play all of these songs on my computer speakers?
Thanks in advance for any help!
[email protected]

R.U. lazy? Why can't you try it by yourself.
Well, I tried it. But it pops out a message saying my system doesn't have the proper components (some such thing -- I'll try to get the exact message next time)...
I have an SB Audigy card properly installed with the latest drivers (and functioning without problems).
As for nvidiot's suggestion to run the setup.exe program. I believe I also tried that method and it showed up the same error message (sorry, will jot down the message next time).
However, I'm interested in this "ctcomp" utility you mentioned that can patch the setup files. How is the ctcomp used? (I recall having an experience with a pre-patched Audigy2 drivers quite some time back. It already had a prepatched ctcomp.dat or some similar thing which allowed the Audigy2 sound driver to install on Audigy sound card.)
So I surmise this method might work (assuming the Creative MediaSource relies on the same identification mechanism).
~~~~~~~~
(edited/added)
Ok, I've finally gotten this thing to install. I probably wasn't running the correct setup.exe program as mentioned above. I went to the SETUP\SETUP directory and run the SETUP.EXE there. The CMS program started to install and after a few minutes of hard disk activity, the setup program told me to restart the system, after which the Creative MediaSource program is installed. (no need for the ctcomp thing)
Thanks to all that helped me here.Message Edited by dta on 0-08-2006 03:3 AM

Creative Mediasource

Hey
How Come original users--Audigy 2 Platinum etc users, are stuck using Creative MediaSource .0, when Audigy 2 ZS users have Access to Mediasource 2, this is so unfair from Creative, I like that program, but I guess Creative doesn't feel us original Audigy 2 USers need updated software at all.

Anyone have some input on this question? but if no replies I guess not
Overall I'm happy with my Audigy 2 Platinum..just wish updated software was provided,and then I'd be perfectly happy. My last soundcard was SB Li've value--and used for over 5 years, and I was so glad that one that the li'veupdate pack or whatever it was called, when I got this Audigy 2 Platinum, I was so happy, but for a while there I was having driver/software issues, those are all resolved now.

Creative Mediasource for Creative Zen (2-38

Hey everyone,
I am well aware that the current version of Creative Mediasource is not available for the Creative Zen. Now I figured that eventually they would make a version compatible with the Zen. I'm currently up to my 3rd Generation of Creative Mp3 players (from Zen Touch to Zen Vision: M to Zen 32 gb ), and I constantly used Creative Mediasource to edit the track information, usually the genres which awere so totally confused (Hip Hop should never be associated with Country :S). However, now that the Zen operates through Windows Media Explorer, instead of being able to select whole cds and right clicking them to 'edit genre', I now have to individually select each song and rewrite the details.. this could be a problem in the near future; I just got my mp3 player last tuesday, and though right now i'll manage, my media database is a little off in terms of assortment, and editing 600 tracks manually seems to be a rather tedious task >.< So, my question is(are):
When (if they ever decide to do so) will a Creative mediasource version for the Creative Zen be released?
Is there a faster method that I'm unaware of to edit the tracks?
I did take the time to look through the forums before I wrote this, taking the precautions by searching for Creative Mediasource, Creative Mediasource Zen flash, etc.Thanks in advance!

Well, I usually avoid Windows Media Player because the computer I use is also used by the rest of the family, and every once in a while it chooses to autosync music onto my Zen.. but if you say it's useful to edit multiple ID3 Tags (so that's the official name for them, oh..), i'll give it another try. And I'll try MediaMonkey too, because it sounds like the program was made specifically to make ID3 tag updating easier.
Thanks for all your help!

Creative Mediasource and the

Hi everybody. I am new to this forum but I have been a Creative user for a long time. My question is this I just bought a new 8gb Zen and the software that came with it did not include the Creative Mediasource organizer. I love the mediasource organizer becouse it puts everything in one easy window, i can see all of the songs on my computer and also what is already on my player. The Zen Media Organizer that came with my new Zen is not very easy to work with. It just shows the songs as File folders. Am I missing something here, why doesn't the new Zen come with the Mediasource Organizer. I like the Mediasource better than Windows Media Player. Please Help

By the Way this is the Email I got from Creative when I asked the same thing
[color="#ff0000"]Thank you for contacting us at Creative Support Service, I am glad to
provide my assistance to you.
I understand that you are enquiring on how to use ZEN Mediasource
application with ZEN player. I would like to apologize for any
inconveniences this enquiry is causing you. Let me see what I can do to
assist you in resolving the issue you facing.
You would like to be informed that ZEN player would only be able to use
on ZEN Mediaexplorer.
Please do include this email upon replying to us. If you do require
additional assistance on the issues you are facing, please reply to this
email with any previous correspondence to ensure the quickest and most
accurate service.
Once again, thank you for contacting us.
Best Regards,
**removed**
Technical Support
Creative Labs Americas
Is it just me or does that not really make sense?
Admin notes: Please leave out the name of the advisor when making such posts.
Message Edited by KokChoy-CL on <span class='local-date'> 07-03-2008<span class='local-time'> 0:42 PM

Creative MediaSource Playlist problems!!

(Creative MediaSource Playlist problems!!i Hello!? I am having a huge problem trying to add music to my playlist that I created using MediaSource (I have a 30GB Zen Vision M)
I'll create the playlist, but it is only saving the last track(s) I added to it.... for example:
I add "Human Touch", "Walk of Life" and "Sultans of Swing" at the same time
Those three songs show up on the playlist
Then I'll add "What's love got to do with it" by itself
Playlist now only contains "What's love got to do with it"
I should note that I recently had to perform a system recovery (since my computer crashed but I didn't lose any data). I have the latest firmware for my Zen Vision M and the latest version of the Creative Media Source Version 3.30.35)? Any questions please ask!
Thanks!

, I would suggest using the Zen Media Explorer for your device to make & edit playlists. It is on the install disc. MediaSource is not that good. Of all the Creative software the Zen Media Explorer for each player is one I do use often for this reason.

Creative Mediasource can't play Chinese so

Recently I reformatted my computer and had to reinstall Creative Mediasource.However, now it cannot play any songs with Chinese characters in their names. src="http://i22.photobucket.com/albums/o246/yunyikaren/creativemediasourceprob.jpg">The Chinese characters in the song titles cannot be viewed and are simply replaced by question marks (E.g. "?The Kila" is shown as "? The Killa" instead) and when I click on it to play, there is?a black X beside the song and it cannot be played. Only the songs with no chinese characters can be played (E.g. 06 K-O). I have tried uninstalling and reinstalling Creative Mediasource fi've times but the same problem still arises.Could anyone help me with this?Thanks! Message Edited by hyperjjfan on 0-22-200706:3 PM

previous version of mediasource doesn't support unicode so you need to go to control panel and setup your computer language to support chinese for non-unicode program.
if not, just go and download mediasource 5 from creative website as that support unicode and should display chinese properly.

Creative Mediasource - Now Playing List on star

I have been using Mediasource for quite a while though and loving it. However, I have one question about the Now Playing List on startup on the program. Originally when i installed the program (i have done this a few times so i know this to be true), the Now Playing list from when i last closed down the player was saved and used by the player the next time i opened it up.
Now, mediasource is stuck on a Now Playing list i created about six months ago every time i open it, no matter what is in the now playing list when i close it. This is not a huge disadvantage as i can save playlists and open them up straight after mediasource opens but it is an issue on convenience.
I was hoping someone knew a way to set it up so the now playing list i have open is kept intact for startup on closure of mediasource. I have fiddled a bit with closing the player with different skins, with the music stopped, playing, paused and with different options enabled but to no avail.
I do however remember having this problem and then randomly one day the now playing list i had had been stored and still continues to remain at start up till this day. Though i cannot remember anything different i was doing that day. I think mediasource is toying with me :P
Any help would be greatly appreciated.

Try deleting the.dat file in "C:\Documents and Settings\YourName\Application Data\Creative\MediaSource".

Upgrading Creative MediaSource Organi

Hi All,
I have a 30GB Zen Extra with firmware .03.02 and MediaSource Organizer 2.0.07. They're running on an XP ServPak 2 laptop with all current critical updates. I was thinking of updating to Creative MediaSource Player/Organizer 5.0.38.
Question: Will my existing player firmware work OK with Creative MediaSource Player/Organizer 5.0.38? Or will I need to upgrade my player firmware?
Thanks!
Advait

I have a Zen Sleek. Same deal... I wanted to upgrade the MediaSource software to version 5 because there are some bugs I've noticed that I was hoping were fixed in the new version.
I tried to use automatic update from within Mediasource - it did not work. I downloaded the new version manually.
Upon uninstall of old version and install of new version I get this wierd error CTXCommonDoInstall.return fails to launch error code 247024864.
What the _______ is this?
The install stops in its tracks. Now I have neither the old nor the new version on my system. How does one fix this?

Creative MediaSource and SB Audigy

I have an SB Audigy Digital Entertainment and have installed Creative MediaSource 3.30.2. My question is how do you enable eax, svm and crossfading in MediaSource? All of them are grayed out from the Play menu. Also the effects bar does not appear. From what I know audio cleanup, time scaling, svm and crossfading is supported by Audigy.
Any help is greatly appreciated.

I have SB0360 (SB Audigy 2z platinum pro) with the exact same problem. EAX, SVM and Crossfading options are grayed out from the Play menu and also do not appear at bottom of player view...
I have CMS Version 03.30.2 installed. Also have the Audio Console. I tried installing the
SBAX_WEBUP_LB_2_08_2004.exe drivers. The install messages indicated a successfull installation and instructed me to reboot.... I then attempted to install the DVDA_PCApp_LB_2.00.75.exe but the Install generated the msg ' setup did not detect the required components setup will now exit '
I'm confused... (I received no errors when installing 2.08.2004 drivers)
I am running Windows XP SP2. I went into the hardware device manager to display the driver version under the Sound, video and game controllers (Creative SB Audigy 2ZS (WDM). Drivers are identified as
Driver Provider: Creative , Driver Date: 2/8/2005, Driver Version 5.2.8.64
I'm confused by the CMS version versus the driver version...
Does the CMS Version 3.30.2 mean I've got .84.55-R version of drivers?
I bought the PC in OCT 2004 with the Card already installed... The install disk is dated 2003 and has a s/n 320ML0000230 on the sleeve and on the disk...
I'm assuming that this is not the 2.08.2004 drivers but how do I know for sure?
Can anyone help explain how I can resolve this?

Trouble with Creative Mediasource

I'm using the latest driver (2.0.00) And Firmware (2.0.03), and CMS5 5.0.38, with the plugins for Zen and the PlaysForSure. My system us Windows XP, SP2, and I meet the minimum system reqs for the program.
Since "upgrading" to Creative MEdiasource 5, I've run into several problems, perhaps all interconnected.
--Mediasource takes an incredibly long time to load my Zen (40 GB Zen Xtra), upwards of 3 minutes. This took only a few seconds in previous versions. This is present when connected through my front, back and USB hub ports.
--Mediasource will rip a CD incredibly slowly. If I try to transfer more than one CD (That is, one, the procedure ends, and then start up another), I will get an error message and MEdiacsource will shut down.
--Sometimes, the window itself will disappear, and I will be unable to access it. This has happened a couple of times instead of the previous problem. The process will still run, but I will be unable to reload it, and trying to forcibly end the process (Task Manager) seems not to work. This also happens sometimes when I browse away from my Zen (Say, to a CD or file on my computer), and come back to my Zen.
I tried using my prior version, but it doesn't recognise my Playsforsure device at present, and I'm not sure if it's even possible to alter it.
Is anyone else having a similar problem? I loved Mediasource prior to this version: It was a sleek, easy and intuiti've interface and covered almost all of my Organisation needs. I did check the boards, but I may have missed a similar problem. I'm wondering if this is an issue that people have a solution to.
Any help's appreciated.

Hello:
I have formatted the player using the recovery menu as well as with WMP, because both are the recommended and "only" ways to format, depending on who you listen to. No difference, however in the way WMP behaves. When I get to the point where WMP can only sync a small few files, if I do a Cleanup (from rescue mode), let the Nomad rebuild the library, I can usually get more files in before it clogs up again. Every time I do a fresh format, I lose a couple of days worth of work, so I'm not doing it again.
I don't have any way to control how much of the library to synchronize once it has gotten past my playlists, unless I spend time creating more playlists for this purpose. With a 60 G Nomad, and a library suitable for that storage, that's a TON of music to deal with.
I'm still trying to figure out whether this is a Windows Media Player issue, a driver issue, or a Nomad firmware issue. Since I have to reset the Nomad between each sync attempt, and occasionally do a cleanup, I'm guessing it's the Nomad, and since I've seen it on more than one unit, I'm guessing it's a firmware bug.
I'm hoping someone else has seen this issue and has a better idea. I hate all my choices: Notmad is frustrating because I can't get my playlists to come across. Creative Media Source is less reliable than WMP, so that leaves WMP as the least aggravating way to sync, and it works flawlessly with my smaller sized Sansa Clip from the same library.
Dan

Creative Mediasource Organizer Losing Year T

I use Windows XP, Creative Mediasource Organizer version 3.30.35 and my player is a Zen MicroPhoto 8G. I have over 4000 MP3 files organized with id tags in Creative Mediasource Organizer. These are almost exclusivly?MP3 files that I recorded myself. Of the 4000 files?there are only a handful, just?one album that could possibly find tag information?to pull from the internet. Yesterday,?more than?200 of my mp3 files?had blank?year tags. I entered the correct year in several dozen of these so that only about 65 had blank year tags. Then I closed the software and turned of my computer. Today I opened Creative Mediasource Organizer to work on filling in those blank year tags. There were over 400 blank year tags today. What is happening? I have PC Music Library open. I select a single file, right click, click properties, click tag information, enter the year in the year field, click OK. Then I right click and select "update tag" click "yes" to confirm that I want the changes to apply to the file itself and not just to the PC Media Library. Please, someone help me understand why?the number of blank year tags is growing instead of shrinking? What can I do to retain the information I enter in these tags?

YESTERDAY:?Monday March 2, 2007:?I edited my media library from within Creative MediaSource so that there are no files without a valid year in the year tag. For?each MP3 file the other standard tags also contain meaningful data. These are?title, artist, album and?genre,?but not track. I don't see any practical way to use the track field for some of these files, so not all of them have a track number. The files I want in my media library are all the MP3 and WMA files within C:/MP3 and it's subfolders. The properties of C:/MP3 as viewed from "My Computer" are 3922 files and 249 folders. About a dozen are WMA files and one is a text file. All the others are MP3 files. The problem is that?there are quite a number of duplicate entries. And the Media Library is reporting several hundred more files within C:/MP3?than "My Computer" is reporting there.
I used "Tools/Settings/PC Media Library/ Delete invalid entries" but it did NOT remove the duplicate entries. Exiting the program and opening it again did not correct the count either. So I selected ALL the files, right clicked, and selected "update tags." I clicked YES to update the tag data from the media library to the files. When that operation was completed, I deleted all the files from the library but not from the computer. And?now I am?importing all the files within C:/MP3?back into the library. It says "now transferring 859 of 3920 files." This is good! 3920 is very close to 3922 minus the one text file. I want to see if, when this transfer is finished, I will have the correct number of MP3 files in my media library, and I want to see if the tag data, including the year data, remains?intact after this transfer. The transfer is complete. I do have 3920 files in my media library now and the data in the id tags appears to be intact. Hopefully, this will still be the case when I open the software tomorrow. THE NEXT DAY:?Tuesday, March 3, 2007: Grrr! I now have 3950 files in my media library where it should be only 3920. I did not add anything ?or make any edits. Exactly 30 of these entries?have blank year fields. I'm thinking that Creative MediaSource is NOT?loosing the data in year tags as I first thought, rather it's ADDING entries that are identical to existing entries except that the year fields in the added entries are empty. I think that if I enter the correct year data, I will end up with 30 entries that are truly exact duplicates. I don't see a pattern or clue to tell me why these 30 and not the others ... they have different artists, different albums, genres and the data in the missing year fields was not all the same. In the track fields, a few are blank, but most of them have data. "Tools/Settings/PC Music Library/Clean up now" did not elimiinate these 30 extra entries. Looking at the properties of C:/MP3 from "My Computer" still shows 3922 files (one is a text file) ... From my experiments yesterday, I am pretty sure that I can delete these 30 extra entries and be left with valid entries for all my files. This is frustrating. I'm hoping that these observations will be helpful to a programmer working on the next version of Creative MediaSource. I would send these comments directly to them, but they don't seem to provide a way for me to do that.

Creative MediaSource won't recognize my Zen Micro all of the sudden!! What is going o

When I first began using my Zen Micro, Creative MediaSource worked fine. I could start my player and it recognized it right away. Then I was told I had to update my firmware and download an update to MediaSource. I did both but shortly thereafter I started having problems! Primarily, when i plug in my Micro a window pops up where I have 3 options, none of which are Creative MediaSource. The window has "MTP Media Player" across the top bar, but i havn't a clue what the "MTP" stands for. The 3 options given are "Sync your music using Napster", "Synchronize media files to this device using Windows Media Player", and "Take no action". I initialy tried "Take no action" and then opened MediaSource only to find it didn't recognize my Micro any more. I then e-mailed Creative for help and got a reply telling me to.............
Thank you for contacting Creative Technical Support.
In regards to your issue, you can try uninstall and reinstall
MEdiaSource with these procedures.
. Click START -> RUN -> type MSCONFIG and click OK.
2. Click SELECTIVE STARTUP and then uncheck LOAD STARTUP GROUP ITEMS.
3. Apply the changes and reboot the computer when prompted.
4. Uninstall MediaSource from the system using ADD/REMOVE PROGRAMS.
5. Manually delete the MediaSource folders from the computer system :
C:\PROGRAM FILES\CREATIVE\MEDIASOURCE
C:\PROGRAM FILES\CREATIVE\CTCDDB
C:\PROGRAM FILES\CREATIVE\MEDIA MANAGER
C:\MEDIA\MUSIC
6. Right-click your My Computer icon and click Properties.
7. Click the Hardware tab and then click Device Manager.
8. Remove any listings for Creative NOMAD products in the Device
Manager
(they will most likely be located in the Uni'versal Serial Bus
Controllers category).
9. If you have a category call Other Devices, look for listings in
there
called USB Device. If you have any, remove them.
0. Install MediaSource only from the original installation CD.
NOTE: DO NOT OPEN MEDIASOURCE WHILE PERFORMING THESE PROCEDURES.
Also, you can try reloading the Zen Micro's firmware through recovery
mode.
Move and hold the Power button to the Power On position and re-insert
the battery to the Zen Micro. Hold the Power button until the rescue
mode appears.
Clean Up: Performs a disk scan on the players hard disk
Format: Formats the players hard disk All contents will be lost
Reload OS: Reloads the Operating System on the Jukebox. Do not select
this option unless you have downloaded the firmware. Reloading your OS
will not effect the contents of the files stored on your Jukebox Zen
Reboot: Reboots the device
Please attempt the options 'Reboot' and 'Clean Up' first. If they do
not
help, you must try 'Reload OS'. To do this, you must have a downloaded
firmware from our website ready. Please let us know the results after
these steps, as soon as possible.
For faster service please reply with previous correspondence when
replying to this email.
Best Regards,
Technical Support
Creative Labs Americas
"Get Creative"
I followed the directions, but 3 of the folders listed in step 5 didn?t exist (only C:\PROGRAM FILES\CREATIVE\MEDIASOURCE did), there were no Creative NOMAD products listed as in step 8, and there was no ?Other Devices? as stated in step 9. I did everything else for all the steps through step 0.
I then re-installed Creative MediaSource from the CD only to find it still didn?t recognize my player! I?ve now done this twice with the same results!
Zen Micro Media Explorer doesn?t even recognize my Micro when it'ss plugged in! It just keeps saying ?The device is not connected. Please connect your Zen Micro to the computer?.
I?m hardly a tech expert, but it seems to me that something on my PC is detecting my player and decieding for itself that the only 2 programs it will let manage my Zen Micro are Napster and Windows Media Player. If this is the case where do I go from here?!?!
Moderator Note: Removed the name of the Email Advisor. Please do this in the future when posting email responses from Creative.Message Edited by Jason-CL on 07-2-2005 02:05 PM

LakeTahoeGuy,
Just as SSR mention, if you're using v2.xx.xx (MTP) firmware then you will need to get the correct version of Media Explorer that support this firmware and also install the MTP plugin for MediaSource. Both the software and plugin are available from the site SSR mention.
Jason

Creative MediaSource will not play certain MP3

I have a Creative Audigy 2 NX with a remote that I really want to be able to use. Programs such as GIRDER, WinLIRC, and uICE do not support the RM-500 remote control.
I can't figure out how to control the remote beyond editing and creating key files that send ASCII commands, but the problem with that is I cannot control programs that are not currently acti've. In other words, I cannot control winamp if I'm playing a game with my remote, which is what I want to do. The KEY files are structured as this:[KeyEvent690 etc]KeyName=whateveryouwantdisplayedNotification=- or 2 or 4KeyEventRemap=this is the important partHandleByApp=i don't know what this doesAnyway, if I set notification to -, I can send ASCII commands-- BUT these will not send to programs not currently on top. If I set notification to 2, as Creative did in their Winamp .x key file, I could control the program even if it is not on top-- BUT I DO NOT KNOW HOW TO FIGURE OUT WHAT THE KeyEventRemaps NUMBERS SHOULD BE. I cannot find this information, and I have tested as far as I am capable of doing manually (tested numbers through 500 MANUALLY).So what I want to be able to do is use my remote to control winamp, but that is impossible. And Creative MediaSource will not play streaming audio (for God knows why...). So what I decided to do was record to an MP3 player with a third party program and play that MP3 in the Creative MediaSource software (the built-in recorder will NOT work, as I cannot structure that into a playlist nor can I play the recording media nor can I minimize the program and mute the feedback-- I can only record if I'm playing, and this doesn't work). The first problem I encountered was several programs would not output MP3s that were playable as they were being recorded, however I finally did find one. This program, 3aLab iRadio, allows the MP3 to be played back WHILE simultaneously being recorded. The only problem is that this the Creative MediaSource software will NOT play the mp3. Out of the 5 different MP3 players I tested, ONLY the Creative MediaSource software would not playback the MP3 as being written. I cannot figure this out, and I am at a loss as to what to do next. I realize that Creative won't support streaming audio with their player, MediaSource, but what I like to do is listen to streaming internet radio as an item on my mp3 playlist in winamp. I wish to be able to control this with my remote, but as I cannot find ANY WAY out there to control my remote as I wish without further information, this is a dead end. My alternati've is to use the Creative software for which the remote was designed to work, but unfortunately this does not support streaming internet radio nor does it support MP3s that are being written to. This is driving me insane.
What I want to be able to do is have a playlist that I control with my remote, with the first item on the list being internet radio, the 2nd and such on down being MP3s. In winamp, this is doable, as well as in Windows Media Player, and most MP3 players out there. Since I cannot do this in Creative's software, I need a workaround alternati've. PLEASE.
So, in conclusion, is there anyone out there who can either tell me how to control my remote directly by identifying what the notification=2 keyeventremap=configuarions are, give me a program like girder however which supports the RM-500 remote, or tell me how to get MP3s that are being written to (aka incomplete) to play in the Creative MediaSource software?
Thank you very much for your time.
Message Edited by PzyX on 0-5-2005 08: PM

Sky_Blue wrote:
Hey ppl. I own a Zen neeon which i bought in Hong Kong. I can't play any of the tracks and i don't know why. Can i still transfer them to my mp3 or will they not work?
I am afraid that you need to provide more detail steps of your problem.Message Edited by micromouse on 0-04-2006 0:52 AM

Creative MediaSource Playlist to Winamp Playl

Hello, I'm just wondering if it is possible to take a Creative MediaSource Organizer playlist and turn it into a playlist that can be used in Winamp. I don't really like using anything other than Winamp to play music, and I don't feel like recreating all of my playlists (I have a LOT of them) into playlists that can be read by Winamp. Thanks for the help and answers :-).

, I would suggest using the Zen Media Explorer for your device to make & edit playlists. It is on the install disc. MediaSource is not that good. Of all the Creative software the Zen Media Explorer for each player is one I do use often for this reason.

Creative MediaSource question

Similar Messages

Maybe you are looking for