Creative Mediasource & Zen V p

Hello,
I'm becoming a bit desperate right now because Mediasource keeps getting stuck/freezing when I try to copy music to my Zen V Plus 2GB I bought this month. Does anyone else have Mediasource freezing when trying to copy music? It often starts OK with 2 or 3 songs transferring, but then at song 4 it keeps hanging at "Busy Writing ... x%" or it gives an error saying the MP3 device is no longer connected while I dont unplug it.
Is my MP3 player broken or something? I love the mp3 player but this just sucks, I have to restart all the time to put on music. Should I give this one back for repairs or is it something else? Another thing is that the software CD was doing weird (maybe unvisible scratch) when I got it and the installation never completes normally and I have to reset. Please help & thanks in advance.
Dshk27Message Edited by dshk27 on 03-05-200704:45 PM

Dshk27,
Try running Cleanup from the player Rescue mode and see if it helps with the transfer.
If you're still having problem, try using WMP for the transfer and see if the same thing happen.
Jason

Similar Messages

  • Creative MediaSource/Zen Xtra/Vista Is

    I have had?a Zen Xtra for a couple of years, I recently got a new computer which has Vista Installed. After going through the nutroll that was downloading MediaSource for Vista and updating the firmware to be Play-for-sure, etc... everything seemed to work together. Except for one issue that I cannot figure out;
    When I operated on Windows XP and I linked my Player to the computer I would see all my songs listed on the screen. Now on Vista I see folders of the albums as opposed to all the tracks listed. This is making creating playlists much harder, searches slower and general management of 6400 songs more difficult than it should be.
    There has to be a way to be able to see all the tracks listed without folders, I am sure I am not the first. Has anyone here cracked the code on this yet?
    Thanks for any help I can get.

    To get it working with Vista you need to update the firmware to the latest ( last ?) version or one that starts with a number 2.something.
    to do this you need:
    a P.C running windows XP
    and on that XP PC you MUST make sure that:
    you have removed/rolled back windows media player
    removed/rolled back windows media player runtime
    even if you dont think any parts of WMP are there, check in add/remove programmes.
    before starting the firmware update make sure that the battery is fully charged and the player is conecte dot the power suply/mains charger.

  • Creative Mediasource for Creative Zen (2-38

    Hey everyone,
    I am well aware that the current version of Creative Mediasource is not available for the Creative Zen. Now I figured that eventually they would make a version compatible with the Zen. I'm currently up to my 3rd Generation of Creative Mp3 players (from Zen Touch to Zen Vision: M to Zen 32 gb ), and I constantly used Creative Mediasource to edit the track information, usually the genres which awere so totally confused (Hip Hop should never be associated with Country :S). However, now that the Zen operates through Windows Media Explorer, instead of being able to select whole cds and right clicking them to 'edit genre', I now have to individually select each song and rewrite the details.. this could be a problem in the near future; I just got my mp3 player last tuesday, and though right now i'll manage, my media database is a little off in terms of assortment, and editing 600 tracks manually seems to be a rather tedious task >.< So, my question is(are):
    When (if they ever decide to do so) will a Creative mediasource version for the Creative Zen be released?
    Is there a faster method that I'm unaware of to edit the tracks?
    I did take the time to look through the forums before I wrote this, taking the precautions by searching for Creative Mediasource, Creative Mediasource Zen flash, etc.Thanks in advance!

    Well, I usually avoid Windows Media Player because the computer I use is also used by the rest of the family, and every once in a while it chooses to autosync music onto my Zen.. but if you say it's useful to edit multiple ID3 Tags (so that's the official name for them, oh..), i'll give it another try. And I'll try MediaMonkey too, because it sounds like the program was made specifically to make ID3 tag updating easier.
    Thanks for all your help!

  • Creative MediaSource won't recognize my Zen Micro all of the sudden!! What is going o

    When I first began using my Zen Micro, Creative MediaSource worked fine. I could start my player and it recognized it right away. Then I was told I had to update my firmware and download an update to MediaSource. I did both but shortly thereafter I started having problems! Primarily, when i plug in my Micro a window pops up where I have 3 options, none of which are Creative MediaSource. The window has "MTP Media Player" across the top bar, but i havn't a clue what the "MTP" stands for. The 3 options given are "Sync your music using Napster", "Synchronize media files to this device using Windows Media Player", and "Take no action". I initialy tried "Take no action" and then opened MediaSource only to find it didn't recognize my Micro any more. I then e-mailed Creative for help and got a reply telling me to.............
    Thank you for contacting Creative Technical Support.
    In regards to your issue, you can try uninstall and reinstall
    MEdiaSource with these procedures.
    . Click START -> RUN -> type MSCONFIG and click OK.
    2. Click SELECTIVE STARTUP and then uncheck LOAD STARTUP GROUP ITEMS.
    3. Apply the changes and reboot the computer when prompted.
    4. Uninstall MediaSource from the system using ADD/REMOVE PROGRAMS.
    5. Manually delete the MediaSource folders from the computer system :
    C:\PROGRAM FILES\CREATIVE\MEDIASOURCE
    C:\PROGRAM FILES\CREATIVE\CTCDDB
    C:\PROGRAM FILES\CREATIVE\MEDIA MANAGER
    C:\MEDIA\MUSIC
    6. Right-click your My Computer icon and click Properties.
    7. Click the Hardware tab and then click Device Manager.
    8. Remove any listings for Creative NOMAD products in the Device
    Manager
    (they will most likely be located in the Uni'versal Serial Bus
    Controllers category).
    9. If you have a category call Other Devices, look for listings in
    there
    called USB Device. If you have any, remove them.
    0. Install MediaSource only from the original installation CD.
    NOTE: DO NOT OPEN MEDIASOURCE WHILE PERFORMING THESE PROCEDURES.
    Also, you can try reloading the Zen Micro's firmware through recovery
    mode.
    Move and hold the Power button to the Power On position and re-insert
    the battery to the Zen Micro. Hold the Power button until the rescue
    mode appears.
    Clean Up: Performs a disk scan on the players hard disk
    Format: Formats the players hard disk All contents will be lost
    Reload OS: Reloads the Operating System on the Jukebox. Do not select
    this option unless you have downloaded the firmware. Reloading your OS
    will not effect the contents of the files stored on your Jukebox Zen
    Reboot: Reboots the device
    Please attempt the options 'Reboot' and 'Clean Up' first. If they do
    not
    help, you must try 'Reload OS'. To do this, you must have a downloaded
    firmware from our website ready. Please let us know the results after
    these steps, as soon as possible.
    For faster service please reply with previous correspondence when
    replying to this email.
    Best Regards,
    Technical Support
    Creative Labs Americas
    "Get Creative"
    I followed the directions, but 3 of the folders listed in step 5 didn?t exist (only C:\PROGRAM FILES\CREATIVE\MEDIASOURCE did), there were no Creative NOMAD products listed as in step 8, and there was no ?Other Devices? as stated in step 9. I did everything else for all the steps through step 0.
    I then re-installed Creative MediaSource from the CD only to find it still didn?t recognize my player! I?ve now done this twice with the same results!
    Zen Micro Media Explorer doesn?t even recognize my Micro when it'ss plugged in! It just keeps saying ?The device is not connected. Please connect your Zen Micro to the computer?.
    I?m hardly a tech expert, but it seems to me that something on my PC is detecting my player and decieding for itself that the only 2 programs it will let manage my Zen Micro are Napster and Windows Media Player. If this is the case where do I go from here?!?!
    Moderator Note: Removed the name of the Email Advisor. Please do this in the future when posting email responses from Creative.Message Edited by Jason-CL on 07-2-2005 02:05 PM

    LakeTahoeGuy,
    Just as SSR mention, if you're using v2.xx.xx (MTP) firmware then you will need to get the correct version of Media Explorer that support this firmware and also install the MTP plugin for MediaSource. Both the software and plugin are available from the site SSR mention.
    Jason

  • Creative Mediasource doesn't detect zen to

    Hello,
    I have a Zen Touch and I have it for a year now but I had installed Creative mediasource a time ago again and now he doesn't find my mp3 player. But my Windows Media Player detects it and with WMP I can put music on my zen touch but not with CMS and I like to do it with CMS. I have installed all drivers and now I don't know what to do. Can anybody help?
    F-J

    What firmware version does the player have?

  • 'Creative Mediasource Organizer' Folders and the ZEN V pla

    Using the Creative Mediasource Organizer, I've set up a few Folders on the 'Creative Zen V' player but when I undock the player and use it to find and play the songs, they're not organized by the Folders. In fact, I don't the folder 'structure' at all. Is there a way I can see and use my folder structure I've set up for the player? and, if not, then why does the Organizer enable me to set up folders?Thanks.

    Folders on the device are merely for your own convenience and organization. The device relies solely on ID TAGS on how it plays and displays the various tracks. You will need to get your tracks in order and edit the tags.

  • ZEN 2.0 & Creative MediaSource Mana

    My Zen 2.0 have worked fine with Creative MediaSource Manager. But after reinstalling my Win XP (SP2) and all programs, drivers etc, it will not recognise my player anymore. I also installed the old program PLay Center which came with the player and this program do recognise the player. Anyone knows how can I make CMO recognize the player again?My "old" player workd great and I don't want to buy a new one just to be able to use it with CMO, when it did work before ...
    Thanks?MartinMessage Edited by Marp68 on 02-4-20080:4 AM
    Message Edited by Marp68 on 02-4-20080:4 AM

    Hum. You really only have one option which is to try disk cleanup. The other slight option I guess is to contact a data recovery company but (a) they might have serious problems decoding Creative's disk format (b) it will be VERY expensi've.
    If disk cleanup does revi've the data then you can still sometimes have problems getting it off, and there's a thread here about what to try if that happens.
    NEVER trust any MP3 player with precious single copies of files. Always try and back them up elsewhere as well.
    btw disk cleanup doesn't defragment. It scans the dri've for files and rebuilds the allocation table.

  • Can't find my zen xtra in the Creative MediaSource Organi

    My Zen Xtra shows in "NOMAD Explorer" but when I try to use Creative MediaSource Organizer to transfer file from my computer to Zen xtra player, I can't found Zen xtra under "my computer"
    any help? My player has the latest firmware and also latest dri've was installed in my computer!!
    thanks for helping

    super80: Have a look here in the Zen FAQ at Nomadness.net on how to install MediaSource, which also makes reference to the required plugin.

  • Zen Xtra won't appear in Creative MediaSource Organi

    I've been using my 30 GB Jukebox for a couple years w/ no real problems except that I remember there being a problem w/ a USB port & I had to change something so that the Creative MediaSource Organizer software could recognize the mp3 player. Now I've bought a 60 GB Zen Xtra (same player, x2) & am having the same problem. I've upgraded everything & hate the new interface for transfering files... most of the time the program just freezes. I'd like to be able to use the same Creative software I was using before, but it doesn't recognize the new device. If anyone knows what I'm talking about or how I can fix it, I'd rather not have to call?Customer Service?again for $3.

    I'm just giving this topic a bump. I've upgraded to Creative MediaSource Organizer v 3.30.2, but it won't recognize either of my mp3 players when I plug them in. I'm able to use the Zen Xtra Media Explorer, but?most of the time it just freezes up. I'd like to be able to use the software I'm familiar w/, so if anyone could help me out I'd appreciate it. I seem to remember having a similar problem when I first purchased my 30 GB Zen Xtra.

  • Problem with Creative MediaSource and Zen Ex

    Earlier today my Creative MediaSource software (the Organizer) stopped detecting my Zen Extra (60GB). I have uninstalled and reinstalled the software several times.
    Everytime I try to open the MediaSource Organizer, I get the following:?[size="3" color="#0033ff">Creative MediaSource Player has encountered a problem and needs to close.[size="3" color="#0033ff">?[size="3" color="#0033ff">Error Signature: [size="3" color="#0033ff">AppName: ctcms.exe AppVer: 2.2.5.0 ModName: ctcms.exe
    [size="3" color="#0033ff">ModVer: 2.2.5.0 Offset: 00098c[size="">
    ?Can anyone help me? How can I get the Organizer working again and how can I get it to detect my player. I have installed the firmware and drivers on this site, but nothing is helping.

    Try deleting the .dat file(s) under "C:\Documents and Settings\YourName\Application Data\Creative\MediaSource". It may solve the MediaSource crashing problem. To detect your Zen Xtra, you need to install its plugin for MediaSource. You may install it from your product CD or get the latest from the Web download. Here is what you should do:?- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.- (Depending on your product and firmware)
    For non-PlaysForSure Zen series: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
    or:
    For PlaysForSure Zen Xtra: Download and install the Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players.
    - If it is listed for your product: Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

  • Creative ZEN 4gb compatible with Creative MediaSource

    Hi,
    I was just wondering if I can use my new Creative Zen 4gb with Creative MediaSource. I really like MediaSource and I would prefer to use it the only problems is when ever I connect it its keep locking up and crashing especially when I go to creative playlists. I used to use mediasource for my Zen Micro. Any suggestion? or does creative no longer support MediaSource with there new players?Thanks!

    Strife04 asked the following:"Hi, does anyone know which Creative MediaSource Player/ Organizer is compatible with the new 4gb ZEN and if there is one, where it can be downloaded? thanks in advance.":?My reply:Which 4gb Zen?I have the Zen V Plus 4 gig and MediaSource Player/Orginizer running on a?Windows XP SP2enabled Dell.
    This works fine for me.

  • Creative MediaSource not detecting my creative zen to

    I'm having trouble with my Creative Zen Touch. In Creative MediaSource, in the sources part on the left hand side, it does not detect my Creative Zen Touch and therefore i cannot transfer music. Any help would be much appreciated. PS when i plug my Creative Zen Touch into the computer using the usb port, the computer detects the device and i have an option to "take no action" or "Transfer files using Windows Media Player".

    I am also having this problem, but in order to download from the zen to the pc, I will have to have everything erased off the Zen, and there is an important recording I want to load to my PC first. There is no where in my creative media source since I updated my firmware to load from Zen to PC like there used to be. Any suggestions?
    Thank you.

  • Creative MediaSource Organizer....Will it work with Zen 16GB

    I still have Creative MediaSource Organizer that I used when i had my Sleek Photo. I really liked using this program to edit the names/albums. Will this program also work with the ZEN 6GB? If not, what program do I use?

    Great! Thats what I thought it would be, they were probably covering themselves with the 'works best with' so no one could come back and say "My mp3 player won't play the movie files" you know what some people are like

  • Creative Mediasource not detecting Zen To

    Hi
    Just reinstalled windows'but can't find my Zen Touch CD anywhere. The only software i ever use is the Creative Mediasource to transfer my MP3's onto the Player.
    I went to Creatives Website and downloaded the Mediasource which is there V3.30.2. It looks slightly never than my old version. I also installed the Driver that was on the creative site and that seemed to install ok.However when i plug in my Zen after i start up the Mediasource it does'nt seem to detect the Zen and i can nothing with it. The Zen's definately connected and working ok because when i go into MY COMPUTER it is showing and i can browse the files.
    Any idea?
    Thanx

    Try this, it was in the knowledgebase. I actually had the same problem and this fixed it.
    geoff
    # Select Start - Run and type regedit to open the Registry Editor.
    # Click on the plus sign (+) next to My Computer to expand it. Continue to expand the following entries: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\U SB
    # Right click on USB, and select Permissions.
    # If the Everyone entry is missing from the "Group or user names". You will need to add it.
    # Click on the Add button, key in "Everyone" into the "Enter the object names to select" dialog and click on the "OK" button
    # Select the "Everyone" on the "Group or user names" section, and then check the "Allow" box for "Read" for the "Permissions for Everyone".
    # Click on the OK button

  • Should I install "Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSourc

    I have the Play For Sure firmware on my Zen Touch, now I'm going to first install the driver on my computer, then install the creative media source, then the play for sure software suite, and then the media source CD plugin. Should I also install the Zen & Nomad Jukebox plugin afterward or that's only for ppl who haven't upgraded the firmware?
    Thanks!

    The "Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource" is for those who have the non-PlaysForSure firmware. So, you do not need to install it.

Maybe you are looking for

  • Zen V Plus firmware wishl

    I could not find a wishlist for the Zen V / V Plus, so here it is. Plain and simple just like the other player wishlists. No questions and no discussions. Just topics with firmware improvements for Zen V / V Plus. Hopefully, the Creative developers w

  • Re: Qosmio G - Hidden files and folders not showing

    Hi folks, I have some hidden files and folders, which I was able to access before, and I used to click on the 'organise tab', view, Advanced Settings, show hidden files and folders, in order to hide or show the files. Unfortunately there seems to be

  • How to add F1 help for a Radiobutton in a report

    Hi Experts, I have created a report in which I defined 4 radiobuttons. Now I want that whenever user selects any of the radiobutton and press F1, a documentation corresponding to that radiobutton should come be displayed. Please give me the ideas on

  • Deleting duplicated records by date

    Hi, what could I do to delete duplicated records from test1 table the test1 table have the next columns that I describe below: code operator phone init_date end_date The records are duplicated by code, operator, phone, init_date and I need to delete

  • Convert OPT file to PDF

    Hi, we have IPM 10.3.1.5 and exported some old TIFF images via web services. However, the exported images are in OPT format and only IPM viewer can see that. Is there a way to convert the OPT file into PDF so we can give them to external users? We ar