Creative MuVo Mix 256mb PLS HELP ME not play mu

Hello all!!!I have mp3 player Creative MuVo USB 2.0 256MB model DAP-TD000and have some problem. When I turn on player I see green led and 3 sec green led it's changed a red don't play music. PLS help me !!!!!!!!!! Sorry for my bad English.

Are you sure the battery is full? If it is, try entering recovery mode for your player (see stickied thread at the top of this forum).

Similar Messages

Please help, DVD not playing in Mac that burnt t

I recently bought an iMac Core duo 17in. I finished my first project in iDVD and everything looked fine when I previewed in iDVD (I used slideshows exported from iPhoto as movies). Then I burnt it to a Fujifilm DVD+R. The process went smoothly and when finished the Mac ejected the finished DVD. Now the weird thing is that when I loaded the DVD to watch it in the same Mac, the computer was unable to read it and just ejected it w/o opening any application. Furthermore, my ONKYO DVD player did not recognize the disc at all. Any suggestions? Can it be related to the Region Codes and NTSC/PAL setting? But the Mac should be able to always read the DVD...It burnt it! Very frustrating...
Sorry for long message. Thanks for any help...
iMac Core Duo 17in Mac OS X (10.4.6)

You should not be using +R format DVDs. They will not play in most standard DVD players, although computers seem to be more forgiveable...
The recommended brand on this forum is Verbatim -R ( and not rewriteable either!)
I use TDK -R and they work fine.
Terri

DVDSP Help - Video not playing in Viewer during some assets, only audio...

Video not playing in Viewer during some assets, only audio until paused. once you hit the space bar or pause, the video shows up in viewer? same results when burnd to disc.
when dragging cursor through out timeline (track 1) video shows up in viewer fine too.
any advice on what could be wrong?
at first i was thinking this was a memory problem, i added another Gig of ram and the problem still exhists.
thanks!

Hi Crazy Dan:
It's a kind of bug in DVDSP Simulator. If you build your project in your hard drive and test it with DVD Player all video will play fine.
I would like to tell you where exactly the problem is located, but it's just a Simulator problem.
Try building your project.
Hope that helps !
Alberto

Help, will not play hdv file?

I have a movie I shot and edited when I was at university using Final cut pro and HDV cams.
I need to show this movie on my macbook pro, but I purchased final cut express, and have just found out my Quicktime does not play this file.. the screen is just black?
I assume I need a HDV 1080i50 codec for quicktime??? is this correct?
Where can I get it?
I intend to give a presentation was going to use OpenOffice or use my Quicktime just for moving image
Any suggestions?
Regards

Without FCP installed, you need a decoder. Calibrated has you covered:
http://www.calibratedsoftware.com/QXD.asp
Shane

Pls help Account Not In This Store

Hi,
i tried to install an apps but it says, Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the ireland store before purchasing.
Any help is very much appreciated.
Thank you.
Glo

Go to settings,store and click on your ID then you can change the country for your store.

PLS HELP: Video not showing up when inserting into timeline

hi everyone:
I recorded DV footage into FCP6. I have the DV footage opened in viewer and I set the in and out points. I drag the viewer footage into the timeline. But only the audio shows up in the time line.
How do I enable it so video can be inserted again?
I did some research and I'm aware there is the v1, a1, a2 on the left side of the timeline bar. If you disconnect v1, a1, or a2 it won't import into timeline on insert. However, even though I have v1 connected to v1 the video still won't show.
May someone help? This project is time sensitive.
Thanks ahead of time.

hey Capt,
It everything was recorded properly. Video and audio was captured while doing log and capture.
I was ediiting and I could insert video and audio files fine. Then I just created a new sequence and now it only inserts audio not video. I tried to insert video in my previous sequences that had video but now video can't be inserted either.
Did I hit some sort of key on the keyboard by accident that disabled the video insert?
Yes the v1 is connected to v1, it is both snapped together when I import video so I don't understand why FCP is not importing video from my sequence, unless it's a bug?!

Pls help: check_changed_data not updating the Itab from non-OO ALV GRID

Hi experts,
Please help this newbie here. I have problem with updating my internal table with multiple cells changes in my ALV. I've used the FM 'GET_GLOBALS_FROM_SLVC_FULLSCR' and the method 'CHECK_CHANGED_DATA'. When I debugged, I could see the changes being captured in ref1.
How can I make sure that the changes were already updated into the itab new_antrag after I presses the button command 'EX_SEND'? The original program is leave program RPTARQUIATEST.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                                                  RS_SELFIELD LIKE SLIS_SELFIELD
Data: ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      E_GRID = ref1.
call method ref1->check_changed_data.
read table new_antrag index rs_selfield-index into wa_new_antrag.
case r_ucomm.
when 'EX_SEND'.
      perform before_prepare using rs_selfield
                                            new_antrag
                                   changing
                                            wa_new_antrag.
      perform request_check using req
                                            pernr
                                            modus
                                            check_command
                                            g_check_mode
                                    changing
                                            checked_req
                                            messages.
      perform request_exec using wa_new_antrag-request_id
                                            pernr
                                            modus
                                            c_cmd_exec_cmd
                                    changing
                                            exec_req
                                            messages.
      perform after_exec using exec_req.
endcase.
ENDFORM.
Please help. Points will be awarded for constructive solutions which help in the problem solving. Thank you.
Cheers,
Damien

Sorry, please ignore this thead because I had unmarked it as a question by accident.

Creative MUVO TX 256MB Pers Audio MP3 Pla

Hi, i might buy this, are there any known probs

I don't know the MUVO TX, but mine 256 TX FM is great.
got it for $70 in walmart

128MB Muvo stop functioning! help can not recov

Is there a way to revi've my muvo. the recovery function won't work anymore. i already tried the suggestions and procedure that i can found on this website. i think the problem started when i accidentally put a magnet together with my muvo on my pocket. or there?is no other way, my muvo is a scrap now. thanks.

Hi! PeeBee,
I manage to make it work. I forgot the last procedure to update the firmware that is why it wont work before. But its ok now.
Thanks.

Lots of Questions about the Creative MuVo Slim 256MB MP3 Pla

Hello, I'm thinking of buying it...but I got lots of questions that i want it answered first before I buy it.

. How long does the battery last? Like would I even need to replace the rechargeable li-ion battery every year? month? never?
2. I know I can only charge the battery via USB cable, so approximately how long is the wait time until it has fully recharged?
3. Is it possible to recharge using an adapter instead of the USB? Because I found it easily.
4. Do you think this is worth buying? Or should I wait on a future release? 
5. Is the voice recording clear? And can you record 5-0 feet away?

Thank you very much for your time in answering my questions.

. Lithium Ion batteries last at peak performance for about 3 years, or 300-500 charges, whatever comes first. They will still work after this for several years, but at reducing performance.
2. Sorry, not sure...
3. Again, not sure. You're taking a risk that the adapter is compatible.
4. Only you can make that decision. Just look at this and the other players and compare the features and price.
5. The in-built microphones are not great quality, and really only good for recording interviews and meetings, that type of thing.

Movies in Help File not playing

Hi
We have released software with a .chm help file. The help
file contains embedded Captivate movies. Some users are having
trouble playing the movies, they see a blank screen where the movie
should be. Clearing the IE cache has a helped some users but not
others. Any ideas?
Thanks
Kath

I'm having the same problem with TV Shows. I've bought a standard definition season like I always have, but when I sync it to my ipod, the screen stays black and the show won't play. Any help anyone can give is welcome!

Help - Mail not playing voicemail sound attachments

Help needed please - I have got used to the amazing feature where Mail will directly play my vonage forwarded voicemails ( forwarded from my voip voicemail as wavs) . This has been an absolute life-saver and a killer feature as it means I can quickly and easily get my incoming voicemail wherever I am, all day...
BUT when I transferred my data to an iBook G4 from my titanium ( via firewire at the mac os setup assistant) , although I've got everything else to work, the qt preview of the sound file attachments in Mail moves along as if playing, but there is no sound. I work with macs professionally but short of reinstalling and rebuilding etc, I can't think how to mend this - it looks like the app is faulty - I tried removing the pref file but of course this gets pretty complex as the apparently the app stores the mailbox access records in the main plist file... so I'd have to rebuild the whole thing - Any help much appreciated
Titanium / iBook G4 Mac OS X (10.4.4)

Chris, have you provided the license code for QuickTime in your new Mac?
If you only have a code for an older version, QT v7 on your new Mac may not run completely. If you do not want to spend the extra $ for the latest QT, delete it and place the older version back from your titanium, reinstall the license code when you run it the first time.
You can find the registration on your old Mac from the Quicktime menu

Help Itunes not playing songs, slow to load

I'm running windows xp on a laptop, and itunes. It is the current version downloaded from mac. The problem is takes about 4 min to actually open itunes. When it finally does, it won't play any songs. I've tried reinstalling it, and tried deleting/updating my song folders. All other programs run smoothly on this computer, what could be wrong??

hi Brandon!
there may be a few different things going on here (possibly more than one at once).
first let's check the start-up problem:
The problem is takes about 4 min to actually open itunes.
hmmm. have you been disabling any qt processes in your start-up? (i keep seeing that recommended in "speed up your PC" articles, but it will produce odd effects like this with itunes start-up.) see:
Frank Nothing, "iTunes 5 works, but takes 1+ min to start" #2, 02:04am Sep 22, 2005 CDT
When it finally does, it won't play any songs
first check to see if you're running itunes in a funny compatibility mode:
http://docs.info.apple.com/article.html?artnum=302478
... while you're looking at compatibility modes, check to see if you've got any
b other
boxes checked (in both your itunes and your quicktime). there have been some reports of this causing odd system performance on PCs.
... it's possible that if any of those boxes
b are
checked, you might want to check to see if any of your drivers are out of date. (excuse the tentative nature of this last suggestion. we're still in the early days of troubleshooting the "system" compatibility mode issues. still not sure precisely what is going on in the background of them.)
love, b

Help - iPod not playing purchased songs.

For some reason, my iPod is no longer playing songs that I have purchased through iTunes.
I can get music from CDs to play fine, but when I put a purchased tune on there, it simply displays the song, then skips it. If I put all purchased songs in one playlist, it simply skips all the way to the last song then jumps back to the main menu.
I didn't have the problem when I first got the nano.

Oh, that was suprisingly easy. Thanks.
I wonder what causes that to happen...

My lockscreen did not showing me time and it lags, help PLS! it´s only black background with unlock button and it lags when i unlocking it pls help

My lockscreen did not showing me time and it lags, help PLS!
it´s only black background with unlock button and it lags when i unlocking it
pls help

It's not an Apple issue and Apple has nothing to do with it.
The only way to buy an iPhone officially refurbished by Apple is to buy it from an Apple store or via Apple's website.
Refurbished iPhones sold via other retailers are not refurbished by Apple.
Sounds like Wireless Wave did all they could... they refunded your money.
Your only issue is with them. Stop getting all worked up over it.

Creative MuVo Mix 256mb PLS HELP ME not play mu

Similar Messages

Maybe you are looking for