Creative MuVo TX 256 and I-trigue 3

Hi, i recently purchased a creative i-trigue 3500 and i already own a muvo tx 256. I was lookin forward to using the M-port on the I-trigue to play music, but when i plug the USB part into the Mport and start the device, no music =(
The speakers themselves works fine and looks even better, but im quite bummed about the Mport not working with my player. I looked at the manual and it said it supports muvo NX. Kinda dumb for creative to make a new speaker system to support an older muvo and not the new one <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0>
I updated my muvo TX with the .0.05 firmware and still nothing.
Im really hoping that someone can help me out here.
Thanks much

mickie,
The MuVo TX does not work with the M-Port. At this moment, only the MuVo NX is compatible with the M-Port feature.
Jason

Similar Messages

Creative Muvo TX SE and Nomad TX same versi

are this 2 players the same version and same firmware is used?
greets

sorry i meant if MUVO TX SE and NOMAD MUVO TX are the same model and firmware, cuz i dont find the firmware TX SE on the US download site, only on the European one

Creative Muvo TX FM and Yahoo Music prob

We bought both our daughters a Muvo TX FM for Christmas. We joined Yahoo Music and are trying to transfer songs to the device. We keep getting an error about the license not being valid. Could you tell me if there is a way to fix this?
Also, what music download sites are compatible with the TX FM?
Thanks,
Krista

If it's a Subscription/monthly fee type service then the MuVo players aren't compatible.
If it is just a Download service then they should work. How are you transferring the files to your player You need to use Creative MediaSource, Media Explorer or Windows Media Player for DRM (protected) music.
PB

Muvo Tx 256 and Track Reversal prob

I have this nagging problem with my Muvo. I will take folders of music, audiobooks etc. and drag and drop them onto it. On my pc, they are in proper order. On the Muvo, however, sometimes they are in proper order, but more often the entire folder is in exact opposite order of what they should be. Therefore I have to play the last track first and continually back up in order to hear things as they should be. Not so bad with music, but with books it's an absolute nightmare. Any ideas what could be causing this? Solutions?
Thanks in advance....

Make sure you are using the newest driver for your operating system. Torstein Please help me with my post: A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.Message Edited by Torstein on -06-2004 05:33 PM

What's the difference between Creative MuVo TX FM and MuVo Micro N2

I want to get gig model and I'm not sure what's the difference between those two (other than price).

The way they look is different
The N200 is solid piece, the TX FM is in 2 pieces (the battery, and the player part itself).
There are features (Line in) which isn't available on the TX (but it's rubbish anyway)
You can read all of it if you look at the specs or features on the creative webby, and then way out the pros and cons for yourself.

Creative MuVo slim return PLEASSEE READ and REPL

Hello i've bought a creative muvo slim 52Mb and it broke in Feb. of this year i sent it in about at march 25 and its july and i dont have it. so whats the problem what do you think is taking them so long

Rrobert2009,
I would suggest the same as scorpian007 that's to contact support and check with the status.
Jason

Creative MuVo TX FM - powers down when scrolling (how to f

I recently purchased a 28Mb Creative MuVo TX FM and thought I might share my experience with other members of this forum.
Not being experienced with MP3 players I duly followed the instructions and copied some wma files from my XP PC onto the MP3 player via USB / Windows Explorer, preset the FM stations and I was away. Oh the joy of having it work first time!
However, whenever I fast forwarded 3 songs or rewound about 4 songs using the scroller, the unit would instantly power down without warning. I thought it was a damaged file (or two) so deleted what I thought were the damaged songs ..... without success. The battery was brand new and the indicator on the LCD showed a full charge but I changed it anyway, without success. Oh the agony of new technology!
So I pulled out the CD, read the manual, found the creative website, found this forum and then ..... nothing! I did a search on the forum and found one other person who had similar problems (there may be more but maybe it was my search words) but I couldn't find a suitable answer. There is nothing in the Creative Knowledge Base and insofar as I can see, no relevant FAQ's.
Back on the Creative webpage I found a firmware upgrade here and after downloading and installing the firmware upgrade (and a reformat courtesy of the upgrade) and reloading the songs, hey presto! Problem solved!
So thanks to Creative for the support and if you are experiencing the same problem (auto shut down when scrolling), try downloading and installing the firmware upgrade per the link above.
Andrew.

Interesting...
I'm glad you were able to solve your problem. I received my MuVo TX FM 52MB with firmware .2.04 and upgraded it to .3.03, but fortunately never had your problem.
Do you know which version you used while experiencing the shutdown-problem?
Not that it is important to me, I'm just curious.

The Creative MuVo 2 FM quest

I was considering buying a The Creative MuVo 2 FM and I had a couple of questions. Can you create on the fly playlists on this unit, and will this unit ever be upgradable to subscription services or is it too old to upgrade.
Also, is there any headphone jack issue like the Micro.
Thnaks all.

. I know you can save playlists to it, but I'm not sure it has a queue in a similar sense to the Zen hard disk based players. My feeling is you won't be able to save playlists, but I can't say 00% for sure.
2. I doubt very much it will be upgraded for subscription.
3. I've seen the odd issue with the headphone socket, but it's very rare. All portable players suffer from this to some degree.

Creative muvo slim 512 quest

Hi ... I currently own a creative muvo slim 52 and I was wondering if there is a faster way to scroll through the songs instead of one by one.
Thanks

Duplicate post.
Jason

Muvo NX 256 no longer recognised by Windows and no recovery m

My Muvo NX 256 (firmware .0..07) has been working fine for months, until it intermittently failed to appear as a dri've when plugging it into a PC. Now, it always fails to connect. I've tried on different Windows XP PCs, so it's not a USB port issue. The player works fine standalone, but I cannot transfer any tracks to it.
I've tried to access recovery mode to use the "connect to PC" functionality, with no success:
- holding "menu" while inserting the battery does not do anything
- holding "play" while inserting the player in a USB port simply starts the player, and it still doesn't appear under Windows
Any advice?
Thanks

If recovery mode doesn't work then the player is faulty unfortunately. If you're still under warranty, contact Creative Support (although you can still contact them for an out of warranty repair).

Major problems with Creative Nomad MuVo NX (256 MB)

Hello, I recently brought a Creative Nomad MuVo NX (256 MB) it hasn?t been more than two months and I?m already having problems with the MP3 player. This is a little hard to explain but, the headphone jack (where the headphones connect to the player) whenever it moves (to the left, right, up, or down) the sound dies, or gets very staticy. There is no way I can play music this way, as the connection moves a lot. Is there anyways I can fix this? I hear that Creative will replace my product if it'ss withen 90 days. I also have proof of purchase, and original retail box materials.

obiant, this has been a problem frequently with some older models of the Zen Extra, although I have not heard of this in a Nomad Muvo. What happened with the Zen Extra is the headphone Jack was just soldered on to the motherboard with nothing to hold it on. After awhile the soldering job on the jack would loosen and sometimes break off. After a awhile creative then added a piece of plastic to keep the soldering from loosing. This may be you problem and if it is I?m surprised that creative would make that mistake twice. You should email Creative tech support to see what they think, they can also arrange to have the player sent to them for repairs.
I hope you get it working or fixed.
Email for creative tech support: http://us.creative.com/support/custs.../emailform.asp
Torstein.
Please help me with my post:? A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.[/b]

Problems running creative zen nano plus and nomad muvo on same compu

We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.

<FONT face=Helv size=2>
Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
Here is what you should do to get the latest MediaSource software:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
- (Depending on your firmware)
Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
or:
Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
- Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
- Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

Creative MuVo and Nforce2 USB Problem solved??

http://www.nforcershq.com/forum/viewtopic.php?t=12499
Posted: Mon Apr 07, 2003 12:43 pm Post subject: Creative MuVo and Nforce2 USB Problem solved??
Creative released a official firmware for MuVo, and according to them
Fixes
Improved USB file transfers for computers with NVIDIA® nForceTM1 or 2 motherboards.
Better playback performance when more than 128 music tracks are in the player.
Uninterrupted playback for high bitrate (192 Kbps) WMA files.
Smooth playback for WMA files even at low battery levels.
Improved Previous/Next Track function.
Player may be turned on even when its memory is full
http://www.nomadworld.com/downloads/drivers/welcome.asp?region=2&LangID=1033&OS=10&prod=437&Select=Get+Files&x=47&y=11

Quote
Originally posted by axeluktoo
Hi,
Good explanation of FSB Spread Spectrum here:
http://www.pimprig.com/forums/archive/topic/7581.html
From what I can make out, it\'s basic function is to help prevent your machine from interfering with other electronic devices (such as TVs, Radios etc.)
Hope this helps!
Axel :D
Thanks for the link.
It does say in there that it does tend to mess up the clock. Also why doesn't the VIA boards have this option?
BioHaz

MuVo TX 256 stopped playing

Hi. I need help with MuVo TX 256.
I am a MuVo TX 256 new user. I bougth my little mp3 player fi've days ago and i have a problem. The MuVo TX 256 sotpped player musics 0 minutes after starting work. The battery icom is full, I already updated the firmware, formated the device and the problem sttil happening. The musics are mp3-28 bits format. I don't know what can I do....
Regards....
Andr? Lima

The flash players are all very easy to use, we have a few different ones, it's best to look at the product pages to see which you prefer. In roughly the same pricerange as the TX 256, we also have the MuVo TX FM 256, the MuVo Micro 256MB, or if you want to spend a little more (and have more storage), there are larger capacity versions of each of the above, and the Zen Nano (52MB or GB), Zen Nano Plus (52MB or GB), MuVo Sport C00 256MB and MuVo Slim (256MB or 52MB).
The product pages are linked on this page:
http://us.creative.com/products/welcome.asp?category=23
Cat

Problemas con creative muvo tx

hola! espero que alguien me pueda kntstar en espa?ol, mi problema es el siguiente:
Tengo un creative muvo tx fm 256, el otro dia quise actualizarlo, y me podia ponerlo "in recovery mode", cuando condegui esto, acutalice el firmware, pero a partir de ahi mi mp3 a dejado de funcionar, no se enciende y el ordenador no lo reconoce, alguien me puede ayudar?
gracias

Voy a traducirlo para que alguien mas pueda ayudar:
hola! espero que alguien me pueda kntstar en espa?ol, mi problema es el siguiente:
Tengo un creative muvo tx fm 256, el otro dia quise actualizarlo, y me podia ponerlo "in recovery mode", cuando condegui esto, acutalice el firmware, pero a partir de ahi mi mp3 a dejado de funcionar, no se enciende y el ordenador no lo reconoce, alguien me puede ayudar?
gracias
Translation:
I Have a Creative Muvo Tx FM 256, the other day I wanted to upgrade it, it asked me to put it in Recovery Mode, when I did that, I upgrade the firmware, but from that moment my mp3 stopped to function correctly, it wont turn on, and the pc wont recognise it, can anybody help me?
Thanks.

Creative MuVo TX 256 and I-trigue 3

Similar Messages

Maybe you are looking for