Creative MuVo TX FM Firmware Upgrade 1.18.02 don't support thai correc

About new MuVo TX firmware. It show thai character for mp3 filename only.
Not for mp3 ID3 tag. Anyone has suggestion for correct this.

Similar Messages

Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PM

This is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM

CREATIVE MUVO TX FM firmware version 200

I see new firmware for Creative MuVo TX FM . Update it now for new support with Microsoft? Windows Vista? and more .
Creative MuVo TX FM Firmware .24.02 ,
This download contains an improved version of the firmware found on your Creative MuVo? TX FM. It improves your player's compatibility with Microsoft? Windows Vista?. For more details, read the rest of this web release note.
Added Features or Enhancements:
* Adds FM recording (for players with firmware .23.03).
Fixes:
* Enables your player to detect downloaded audio tracks after your player is formatted using FAT32 (Windows Vista RC and above).
Requirements:
* Windows Vista, Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
* Available USB port (version . or higher)
* Creative MuVo TX FM
* For Windows 98 SE only: Creative Mass Storage Driver .07.00.250 or later, available from the Internet
Notes:
* This firmware only works with Creative MuVo TX FM players. Do not install this firmware for other players.
* You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware.
* To install this firmware:
. Download the MuVoTXFM_PCFW__24_02_a.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.
This new firmware is good , i was update it and i not see errors for my CREATIVE MUVO TX FM .
I have a 52 Mb CREATIVE MUVO TX FM . And i like it .
Thank you Creative Technology Ltd .
Have a nice day .

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

Creative Zen Nano Plus Firmware Upgrade 1.03

Hi everyone,
Just wanted to make you aware of an update that has just been posted on our site.
<TABLE cellSpacing=0 cellPadding=0 width=540 bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD height=5><FONT color=blue> (<FONT color=#222222 size=><B>.6 MB</B>) </TD>
<TD><FONT color=#222222 size=>2 Sep 05 </TD></TR></TBODY></TABLE>
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenNanoPlus_PCFW_LF__03_02.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENP-FWARE-2-LF
<DIV id=ShortDesc>
This upgrade improves the functionality of your Creative Zen? Nano Plus player. For complete functionality, make sure that you meet the requirements listed below before installing this upgrade.
<DIV id=Features>
<EM>Enhancement:</EM>
Supports Thai unicode character display.
</LI>
<DIV id=Fixes>
<EM>Fix</EM>:
Ensures proper functionality of WMA playback when you move forward or backward within a track.
Improves Shuffle mode randomization when you play back a large number of MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Nano Plus player
For Windows 98 SE only: Creative Mass Storage drivers .05.0.250 or later, available from the Installation CD or the Internet</LI>
<EM>Notes:</EM>
This firmware upgrade only works with Creative Zen Nano Plus players. Do not install this upgrade for other players.
You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before upgrading the firmware.
To install this firmware upgrade, do the following:
Download the ZenNanoPlus_PCFW_LF__03_02.exe file into your local hard disk.
Connect your player to your computer.
Double-click the firmware upgrade file.
When prompted to set your player in Recovery mode, disconnect your player from your computer.
Press and hold the Play button while connecting your player to your computer's USB port.
Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
Release the Play button when the Find New Hardware dialog box appears on the computer screen.
Follow the instructions on the screen to install recovery drivers for your player.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI>
</TD></TR></TBODY></TABLE>

I went ahead and updated it anyway. One little thing I noticed was now the volume only goes up to 25 like my Zen Touch instead of 40 or whatever that it did before. Same loudness, different numbers only. Other than that, I have not noticed anything different, but it seemed to work OK scrolling through a song with the old firmware. I did not, obviously, do a detailed comparison.

SUCCESS !!! Muvo TX 512MB Firmware Upgrade

My Muvo was toast. Same issues as others here. "No Music" message when Windows Explorer clearly showed mp3 files plus data files. I was even able to copy (backup) files to my laptop. I highly recommend this before you start anything!
After that, though, deleting files caused all sorts of problems. Most notably was the hanging or freezing every time windows explorer/windows format/(even)IE creative.com site autoupgrade tried to access the player. I formatted the dri've. After the first format (FAT not FAT32) I wasn't able to format the dri've again.
I finally decided to manually download the newest firmware (MuVoTX_PCFW_LF__22_03.exe). I've read that others have had problems with it. I removed the player from the usb port then (read somewhere here to do this) held the power button down while I reconnected it. I then ran the file above. It appeared to hang again. I also got the standard windows "new hardware detected" window and went ahead and clicked "let windows install new software (recommended)" (or something like that).
It took awhile but it finally completed. I noticed the player display was completely dead now though. Never happens when connected to the usb. I clicked on the "Safely Remove Hardware" (recommended in the manual before disconnecting). Sure enough, the player was completely dead. No power up or anything. I chuckled to myself cuz I had read this same problem over and over.
I connected it to the usb port again. Windows Explorer did not see it. I RERAN "MuVoTX_PCFW_LF__22_03.exe". The player was immediately detected! Second time around a dialog box appeared showing old firmware (0.00.0), new firmware (.22.03) and an option to format data area, which I took. Viola!!! SUCCESS !!! Upgrade completed!!!
I'm happy to report that I am now able to load mp3's on my Muvo TX. It's working fine so far. I'll report back if anything changes.
ps.
Tip - Keep in mind the "number of files" limitations on the player. Use folders! A folder with multiple mp3's is still considered one file in itself.

My Muvo was toast. Same issues as others here. "No Music" message when Windows Explorer clearly showed mp3 files plus data files. I was even able to copy (backup) files to my laptop. I highly recommend this before you start anything!
After that, though, deleting files caused all sorts of problems. Most notably was the hanging or freezing every time windows explorer/windows format/(even)IE creative.com site autoupgrade tried to access the player. I formatted the dri've. After the first format (FAT not FAT32) I wasn't able to format the dri've again.
I finally decided to manually download the newest firmware (MuVoTX_PCFW_LF__22_03.exe). I've read that others have had problems with it. I removed the player from the usb port then (read somewhere here to do this) held the power button down while I reconnected it. I then ran the file above. It appeared to hang again. I also got the standard windows "new hardware detected" window and went ahead and clicked "let windows install new software (recommended)" (or something like that).
It took awhile but it finally completed. I noticed the player display was completely dead now though. Never happens when connected to the usb. I clicked on the "Safely Remove Hardware" (recommended in the manual before disconnecting). Sure enough, the player was completely dead. No power up or anything. I chuckled to myself cuz I had read this same problem over and over.
I connected it to the usb port again. Windows Explorer did not see it. I RERAN "MuVoTX_PCFW_LF__22_03.exe". The player was immediately detected! Second time around a dialog box appeared showing old firmware (0.00.0), new firmware (.22.03) and an option to format data area, which I took. Viola!!! SUCCESS !!! Upgrade completed!!!
I'm happy to report that I am now able to load mp3's on my Muvo TX. It's working fine so far. I'll report back if anything changes.
ps.
Tip - Keep in mind the "number of files" limitations on the player. Use folders! A folder with multiple mp3's is still considered one file in itself.

MUVO TX FM Firmware upgrade prob

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

Creative Muvo N200 - behind Firmware nothings workling anym

can anybody help me
i updated the FIRMWARE from
.0.0 to .2.0
anything without problems
behind that i transfered MP3 files from my harddisk to the player, than i get an error message
also the player cant be startet anymore
the battery is full, before the Firmware Update everything was perfect
please help me
thx a lot

Glad to hear it

Zen Micro PlaysForSure firmware upgrade fatal error - RESOL

First, sorry about poor english!
When i tried to upgrade my Zen Micro to the latest firmware i got the following message: "Creative Zen Micro PlaysForSure Firmware Upgrade: This application only supports Windows XP platform with at least Service Pack installed." The executable name was: ZenMicroP4S_PCFW_L6_2_2_02.exe and yes i have Windows XP SP2 installed on my computer. (and on the other three computers, where i got the exact error message.)Message Edited by kaszast on 0-26-2006 08:37 AM

Dear Creative!
You screwed the upgrade program a bit, because it is works ONLY IN ENGLISH version on Windows XP. Shame! You are pushing me into the sea of warez...

Help: MuVo² 5 GB firmware error and connection proble

Thanks in advance to everybody reading this. I've searched through the forums for two hours and have not found a solution.
When started, my girlfriend's Muvo? 5 GB player only shows "firmware error" and switches to recovery mode. So I tried "Scan Disk", "Clean Up", "Format All" rebooting between each step. Nothing changed, so I downloaded the firmware "Creative MuVo? FM Firmware version .00.02". I could not find the exact firmware for the 5 GB player and read in the forum, that this version should work. When I chose "Reload Firmware" and attached the player via USB after I had been told to do so, my computer recognized the player. However when I tried to run the .exe file the setup told me "Your player is not connected, please connect your player."
I've tried it on four different computers and the same message keeps popping up. I'd be really grateful if anybody could help me out on this one. Thanks in advance.

luis bustamante-
Greetings and welcome.
Pull out both of those cards and see if you can boot.
It is most likely one of them or an externally connected peripheral.
Luck-
-DaddyPaycheck

Muvo TX FM 512MB: firmware upgrade failed. How to recov

Hi, I have a Muvo TX FM 52MB. The firmware version used to be .4.0x. I tried to upgrade it to the newest one, .7.04.
I did everything according to the Instructions on the Creative Download Website. I let the OS to choose the recovery driver for me. The firmware upgrade file correctedly found my player and executed the upgrade. However, there's no instruction that I should check the format data option during upgrade. So I didn't format the data during upgrade. After the upgrade, I couldn't start the player and the PC couldn't recognize it.
I tried to do the upgrade again. The PC correctly recognized the player as a recovery device. After I started the creative upgrade program, the program founds the recovery device, then started to find any device connected to the computer, finally said that "The device is not connected to the USB port".
How to solve it's Many thanks.
Alex

go to nomadworld.com and find the firmware... READ PROPERLY... it says that u must install a new driver before u upgrade the firmware... mine works... for now, to recover it, press and hold the play button on the player while connecting it and hold the button until a window appears to install the player recovery software... before that, install the new driver first. then let windows search for the driver. windows will clear everything up in ur player. NOW U CAN DO UR firmware update... it doesnt matter whether u want to format or not cause the firmware upgrade program will format your player even though u didnt want to do it. its not the formatting problem.. hope this hel
ps.
thanks for reading.

Creative Zen Touch Firmware Upgrade version 1.01

Hi Everyone,
Just to make you aware, a new Zen Touch firmware has been posted on our site:
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenTouch_PCFW_L4__0_03.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENT-FWARE--L4
<DIV id=ShortDesc>This firmware upgrades your Creative Zen Touch player for improved functionality.
<DIV id=Fixes>
<EM>Fixes:</EM>
Improves player functionality when the Random and Next buttons are pressed.
Resets the Custom EQ settings when resetting your player's settings.
Improves the display order of the Touch Pad sensitivity settings.
Improves the continuous playback of WMA and MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition (Me)or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Touch installed</LI>
<EM>Note:</EM>
To install this firmware update, do the following:
Download the ZenTouch_PCFW_L4__0_03.exe file into your local hard disk.
Connect the player to your computer.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI></TD></TR></TBODY></TABLE>
Cat

'Thanks a million for the link, KokChoy-CL! You are now on my X-mas present list.
I have been using the .0.03 firmware, but recently I read http://forums.creative.com/t5/MP3-Players/Zen-Touch-Custom-EQ-Frequencies-Wrong/m-p/64205" and wanted to try out the .00.06 firmware. Comparing from memory and using custom EQ, lows and mids sound much more clear now while bass is a bit more on the light side.

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

A Question About Firmware For Creative MuVo TX

1. How Can I Take Backup Of My Orginal Firmware From My Player ?
My Firmware version Is .20, And I Want To Take Backup Of It Before Upgrading It To .24.
2. What Is The Worst Condition If The Firmware Upgrade Is Halted By Any Error Or By Some Problems ? Can Player Work Again Without Contacting Any Service Center ?
Does Sound Quality Of TX FM Increases After Doing Firmware Upgrade ?
Does The FM Radio Becomes More Clear After Firmware Upgrade ?

If you want to use the software on the new machine then the new machine needs to be a Mac and you need to deactivate the software (use Help -> Deactivate) on one of the two current installations so that you have an activation available for the new machine.
I am assuming you meant CS5.5, not CC 5.5, and that you have a single user license, not two licenses... a single user license allows you to have two activated installations. If you do actually have two licenses then you should be able to use them with four different machines.

Creative Muvo tx

everybody i think has problem with firmware for their muvo tx SE, my problem is like that, I opened my box and first what i did was flashing the firmware, ofcourse the muvo was dead i couldn't flash any firmware for tx(any version) so i flashed with wersion for fm, everything is ok in this version (without no working radio fm, but i think it is normal but now i can't flash with any firmware for tx beacause my device is now recognised like muvo tx fm(on the lcd is shown only part of the image-usb connected to player, you know what i mean), I had sent many mails to creative and I got answer that the new firmware .3.02 will available a few days after the new year, beacause they don't have it yet,so maybe it will repair the situation with our problem, but in my opinion they only make their hands full of work with this case, because many people sent back their players to them, for change. This shouldn't happen because Creative is well known company, they wasted much money on it and let people to waste their time with sending many mails, players to company. I can send my and get the new one, but who will guarantee that it wouldn't be the same after flashing to new firmware? People shouldn't be afraid with that, because Creative is making firmware to upgrade by people at home without any problems!
Best regards from eRd from Poland (we have the same problem here too to people from Creative who like to answer mails about the same problem with muvo tx se, thank yourself

I have a suspicion the firmware is not fully compatible with Win2000. As I wrote installing the firmware upgrade just knocked the device down. I could set into the recovery mode, yet the firmware wouldn't install. The version .0.05 is the current one and .02.0 was built in.
Anyway, I got sick and tired of communications with Creative Support (which reads: a creative approach to support) and just returned the device to the shop I have bought it. The serviceman did quite exactly what I was performing yesterday myself, and, in the and he said the device was out of order.
Truly, I could buy some 00 of MuVo's screw them one by one with the latest firmware, and return them all to the shop, as they would malfunction. As eRd said it might be worth fixing the firmware. I meant for the economy of Creative.

Creative MuVo TX FM - powers down when scrolling (how to f

I recently purchased a 28Mb Creative MuVo TX FM and thought I might share my experience with other members of this forum.
Not being experienced with MP3 players I duly followed the instructions and copied some wma files from my XP PC onto the MP3 player via USB / Windows Explorer, preset the FM stations and I was away. Oh the joy of having it work first time!
However, whenever I fast forwarded 3 songs or rewound about 4 songs using the scroller, the unit would instantly power down without warning. I thought it was a damaged file (or two) so deleted what I thought were the damaged songs ..... without success. The battery was brand new and the indicator on the LCD showed a full charge but I changed it anyway, without success. Oh the agony of new technology!
So I pulled out the CD, read the manual, found the creative website, found this forum and then ..... nothing! I did a search on the forum and found one other person who had similar problems (there may be more but maybe it was my search words) but I couldn't find a suitable answer. There is nothing in the Creative Knowledge Base and insofar as I can see, no relevant FAQ's.
Back on the Creative webpage I found a firmware upgrade here and after downloading and installing the firmware upgrade (and a reformat courtesy of the upgrade) and reloading the songs, hey presto! Problem solved!
So thanks to Creative for the support and if you are experiencing the same problem (auto shut down when scrolling), try downloading and installing the firmware upgrade per the link above.
Andrew.

Interesting...
I'm glad you were able to solve your problem. I received my MuVo TX FM 52MB with firmware .2.04 and upgraded it to .3.03, but fortunately never had your problem.
Do you know which version you used while experiencing the shutdown-problem?
Not that it is important to me, I'm just curious.

Creative MuVo TX FM Firmware Upgrade 1.18.02 don't support thai correc

Similar Messages

Maybe you are looking for