CREATIVE MUVO TX FM firmware version 200

I see new firmware for Creative MuVo TX FM . Update it now for new support with Microsoft? Windows Vista? and more .
Creative MuVo TX FM Firmware .24.02 ,
This download contains an improved version of the firmware found on your Creative MuVo? TX FM. It improves your player's compatibility with Microsoft? Windows Vista?. For more details, read the rest of this web release note.
Added Features or Enhancements:
* Adds FM recording (for players with firmware .23.03).
Fixes:
* Enables your player to detect downloaded audio tracks after your player is formatted using FAT32 (Windows Vista RC and above).
Requirements:
* Windows Vista, Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
* Available USB port (version . or higher)
* Creative MuVo TX FM
* For Windows 98 SE only: Creative Mass Storage Driver .07.00.250 or later, available from the Internet
Notes:
* This firmware only works with Creative MuVo TX FM players. Do not install this firmware for other players.
* You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware.
* To install this firmware:
. Download the MuVoTXFM_PCFW__24_02_a.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.
This new firmware is good , i was update it and i not see errors for my CREATIVE MUVO TX FM .
I have a 52 Mb CREATIVE MUVO TX FM . And i like it .
Thank you Creative Technology Ltd .
Have a nice day .

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

Similar Messages

Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PM

This is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM

Creative MuVo TX FM Firmware Upgrade 1.18.02 don't support thai correc

About new MuVo TX firmware. It show thai character for mp3 filename only.
Not for mp3 ID3 tag. Anyone has suggestion for correct this.

About new MuVo TX firmware. It show thai character for mp3 filename only.
Not for mp3 ID3 tag. Anyone has suggestion for correct this.

Creative Muvo N200 - behind Firmware nothings workling anym

can anybody help me
i updated the FIRMWARE from
.0.0 to .2.0
anything without problems
behind that i transfered MP3 files from my harddisk to the player, than i get an error message
also the player cant be startet anymore
the battery is full, before the Firmware Update everything was perfect
please help me
thx a lot

Glad to hear it

Help: MuVo² 5 GB firmware error and connection proble

Thanks in advance to everybody reading this. I've searched through the forums for two hours and have not found a solution.
When started, my girlfriend's Muvo? 5 GB player only shows "firmware error" and switches to recovery mode. So I tried "Scan Disk", "Clean Up", "Format All" rebooting between each step. Nothing changed, so I downloaded the firmware "Creative MuVo? FM Firmware version .00.02". I could not find the exact firmware for the 5 GB player and read in the forum, that this version should work. When I chose "Reload Firmware" and attached the player via USB after I had been told to do so, my computer recognized the player. However when I tried to run the .exe file the setup told me "Your player is not connected, please connect your player."
I've tried it on four different computers and the same message keeps popping up. I'd be really grateful if anybody could help me out on this one. Thanks in advance.

luis bustamante-
Greetings and welcome.
Pull out both of those cards and see if you can boot.
It is most likely one of them or an externally connected peripheral.
Luck-
-DaddyPaycheck

A Question About Firmware For Creative MuVo TX

1. How Can I Take Backup Of My Orginal Firmware From My Player ?
My Firmware version Is .20, And I Want To Take Backup Of It Before Upgrading It To .24.
2. What Is The Worst Condition If The Firmware Upgrade Is Halted By Any Error Or By Some Problems ? Can Player Work Again Without Contacting Any Service Center ?
Does Sound Quality Of TX FM Increases After Doing Firmware Upgrade ?
Does The FM Radio Becomes More Clear After Firmware Upgrade ?

If you want to use the software on the new machine then the new machine needs to be a Mac and you need to deactivate the software (use Help -> Deactivate) on one of the two current installations so that you have an activation available for the new machine.
I am assuming you meant CS5.5, not CC 5.5, and that you have a single user license, not two licenses... a single user license allows you to have two activated installations. If you do actually have two licenses then you should be able to use them with four different machines.

Slow startup after installing on my StorCenter ix2-200 CE the latest firmware version 3.2.10.30101

Hi,
After installing some weeks ago the new firmware version 3.2.10.30101, the startup of my device is taking consistently around 45-60 minutes to be full operative, accessing to its web interface or being mapped and available the different disk units that i have configured.
What about the corresponding warranty that should have the new firmware? If it has being published and recommended by Lenovo, it should have the corresponding period of warranty.
So:
1.- Has the root cause been detected? Should we have a new firmware version solving it? Because it seems downgrade to previous firware version is not possible.
2.- Could you confirm a possible workaround? Disconnect network cable and startup device till consisten white led...?
3.- For an alternative solution, can it help to rewrite this firmware version? How is the procedure?
4.- Does full factory reset help? If yes, i can look for making a backup, and try it.
Waiting for your suggestion of next steps.
Thanks for your support.
Javi

Hello jdehoyosr
My answer is still the same. You would not have been able to factory reset the unit and retain your data without backing up the data first. I have already clearly explained that the backup and restore feature could have allowed you to backup your settings/configurations to be restored after the factory reset. You would have still needed to restore your data from the backup after the factory reset regardless if you had used the configuration backup and restore option for your settings.
The configuration backup and restore would not have been able to the firmware glitch that you were experiencing. If would have had a previous backup file, it would only have applied settings that you had previously backed up. Depending on which restore option was picked it could have also wiped your data.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Creative MuVo TX FM - powers down when scrolling (how to f

I recently purchased a 28Mb Creative MuVo TX FM and thought I might share my experience with other members of this forum.
Not being experienced with MP3 players I duly followed the instructions and copied some wma files from my XP PC onto the MP3 player via USB / Windows Explorer, preset the FM stations and I was away. Oh the joy of having it work first time!
However, whenever I fast forwarded 3 songs or rewound about 4 songs using the scroller, the unit would instantly power down without warning. I thought it was a damaged file (or two) so deleted what I thought were the damaged songs ..... without success. The battery was brand new and the indicator on the LCD showed a full charge but I changed it anyway, without success. Oh the agony of new technology!
So I pulled out the CD, read the manual, found the creative website, found this forum and then ..... nothing! I did a search on the forum and found one other person who had similar problems (there may be more but maybe it was my search words) but I couldn't find a suitable answer. There is nothing in the Creative Knowledge Base and insofar as I can see, no relevant FAQ's.
Back on the Creative webpage I found a firmware upgrade here and after downloading and installing the firmware upgrade (and a reformat courtesy of the upgrade) and reloading the songs, hey presto! Problem solved!
So thanks to Creative for the support and if you are experiencing the same problem (auto shut down when scrolling), try downloading and installing the firmware upgrade per the link above.
Andrew.

Interesting...
I'm glad you were able to solve your problem. I received my MuVo TX FM 52MB with firmware .2.04 and upgraded it to .3.03, but fortunately never had your problem.
Do you know which version you used while experiencing the shutdown-problem?
Not that it is important to me, I'm just curious.

Lost CD of creative MuVo V100 2GB

I lost my CD of my MuVo V00 2GB. I need the Creative Media Explorer where you can transfer songs to the player and set the order of the songs. Is there a download for it's My firmware is .05.0e. I already looked here http://support.creative.com/Products...ame=MP3+Player but the software I need is not listed there.
Thanks in advance

Re: Lost CD of creative MuVo V00 2GB8 The software is at FileSavr file hosting.
This is the creative labs software for the Muvo mp3 player. This version will work for Windows XP. I did not upload these to infringe on any copyrights, I uploaded them so that people who have lost their Muvo software for XP can reclaim it. The version of the software on this site is for Vista only.
Here are the files:
http://www.filefactory.com/file/a0456f/n/muvo_exe
another version:
http://www.filefactory.com/file/a045...o_software_nbi
The first is a winraw file. Put it on your hard dri've, extract, and it should install. The second version is for folks who have nero. Download it, burn it onto a CD, then instal it from the CD. Either way, if anyone finds this useful, I strongly suggest you burn a copy and save it for yourself. The files will only stay on the site as long as people keep downloading them. Once the files are gone from the site, that's it. I will not upload them again.

Thank you David ... for links to previous firmware versions

Thank you david for posting the links to previous firmware versions. I posted a thread about the WRT54G (V8) and Easylink Advisor not recognizing this router after firmware upgrade. The timing of your post is excellent.
Just for some more info for WRT54G V8 users. I had the Easylink Advisor working before firmware update. After firmware update it still recognized router but NOT to set up new security settings. Everything was working and dropped connectivity issues seemed to be resolved so I was happy enough. But I had a conflict I thought was related to the Easylink advisor intsall (it was). So, I uninstalled and reinstalled. Easylink would not recognize the router at all afterward.
I think that rolling back to previous version firmware, then going through set up of Easylink advisor should restore functionality to the app. (except for security changes) but I havent tried it yet.
I need the new firmware to keep from dropping internet connection. So, I am hoping that I will only lose access to security changes through Easylink advisor when re-flashing with the new firmware again. We'll see.
I assume Linksys will upgate the Easylink Advisor in the near future so that it will recognize the WRT54G V8 router with latest firmware 8.00.4?
Thanks again David and good luck, all.

Yes, that was good news for V:M users but when are Creative going to release new firmware for the Zen Nano Plus and the Muvo players so that it contains FM Recording again?Could the Mods try and find out, please??PBMessage Edited by PeeBee on 2-09-20060:48 AM

I am not able to format my creative Muvo V100 model mp3 pla

Hi
I am not able to format my Creative Muvo V00 model Mp3 player.As i connect it to pc to format it is showing the icon but when i right click on that icon to get the format option it is not responding?me.More i tried in windows explorer also there also it is not responding to my instructions.So please suggest me which?antivirus will resolve my problem.
Even i dont know how to upload my firmware..Can u suggest the site where that firmware will be available for me in free of cost. I need help please call me 996957368

rusaus: I'm guessing there aren't a lot of MuVo? owners here. You could try the manual (which you can download here I think), or ask the same question over at JumpingCholla's Usenet server which definitely has some MuVo? owners.

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

Creative MuVo TX SE (1 GB) supports which USB 2.0 - type (low-,full-,highspeed

Hi there!
I would like to buy this player, but there is one thing I am still thinking about.
This player supports USB 2.0, but which type?
I mean, there are players which *seem* to be fast, but they are only compatibel! to USB 2.0, so one can use it, but not at the expected speed (only at USB .).
There are 3 "speed types" of USB 2.0:
lowspeed (,5 Mbit/s)
fullspeed (2 Mbit/s)
highspeed (480 Mbit/s)
And when the description of the Creative MuVo TX SE ( GB)is right, it should support highspeed, right?

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

Firmware Version to

Recently purchased MuVo TX FM 52mb with Firmware Version ..0. Can I update the player directly to version .9.0 without any issues?
Tks

You can but be aware that the newer version has a volume scale of 0-25 instead of 0-40 and this makes the lowest volume louder than it was before as all they did was remove the lowest 5 levels.
You might have trouble going back to ..0 if you don't like it. There are loads of posts from people who don't!
PB

I want to downgrade my MUVO v200 to firmware 0.

Hi,
I have a Muvo v200, worked perfect in all computers until i upgrade to the last firmware, bad idea. I bought a Woxter with an USB port, and my MUvo v200 MP3 player not regconized, i thought maybe if i update my firmware it could be works. NO works in a voxter x-div.
I updated tho the last firware in the web, and works perfect in my enterprise,with a lot f computers, but when i arri'ved at home with my motherboard P4C800 Deluxe, the computer freeze, and gave me an error on hardware found.
I've read almost all the messages in the forum, recovery mode, USB mass storage, uninstall, reinstall drivers, i downgrade my Muvo with the complete list of older firmwares. I update the motherboard bios, the USB controller to USB2, the full speed in the bios.
And in some computers not works.
Before i upgraded, it works with all computers, and is that i want now.
Please i'm wonder if it's posible to extract the firmware of the recovery that is 0.0.0 and put in the firmware of my muvo v200 again. I'm sure that works again with all computers.
Believe me, when i say that i read almost all the faqs and messages, and i try a lot of possibilites during 3 days.
I'm waiting an answer thanks a lot in advance.

Hi rufustfirefly
Were you trying to install the following firmware?
Creative MuVo V200 Firmware 1.13.03
Dated Aug 21, 2015
File Name : MuVoV200_PCFW_LF_1_13_03.exe
If this is the correct file, do note there is already a warning in the description that explicitly states the following:
"...web release note. This firmware removes your player's FM recording feature."
In any case, let me confirm whether this can be rolled back.
Regards,
Colin-CL

CREATIVE MUVO TX FM firmware version 200

Similar Messages

Maybe you are looking for