Creative muvo txfm creative media sou

converting vinyl records to mp files.instructions in creative media source read. In status display.Select recording source .eg select line in option .PROBLEM.Line in window wont activate .PLEASE HELP.Desperate woodturner

Do you sound card have a line-in?

Similar Messages

Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PM

This is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM

Lost CD of creative MuVo V100 2GB

I lost my CD of my MuVo V00 2GB. I need the Creative Media Explorer where you can transfer songs to the player and set the order of the songs. Is there a download for it's My firmware is .05.0e. I already looked here http://support.creative.com/Products...ame=MP3+Player but the software I need is not listed there.
Thanks in advance

Re: Lost CD of creative MuVo V00 2GB8 The software is at FileSavr file hosting.
This is the creative labs software for the Muvo mp3 player. This version will work for Windows XP. I did not upload these to infringe on any copyrights, I uploaded them so that people who have lost their Muvo software for XP can reclaim it. The version of the software on this site is for Vista only.
Here are the files:
http://www.filefactory.com/file/a0456f/n/muvo_exe
another version:
http://www.filefactory.com/file/a045...o_software_nbi
The first is a winraw file. Put it on your hard dri've, extract, and it should install. The second version is for folks who have nero. Download it, burn it onto a CD, then instal it from the CD. Either way, if anyone finds this useful, I strongly suggest you burn a copy and save it for yourself. The files will only stay on the site as long as people keep downloading them. Once the files are gone from the site, that's it. I will not upload them again.

Lecture of protected music on Creative MuVo

Hi,
I submit the following problem :
I have transferred on my Creative MuVo TX Go protected music whose I have the license and I can listen on my computer. But the player didn't read them : he directly passes to non-protected files. I have checked : all my files are .wma, then the problem doesn't come from it. I don't understand given that I can perfectly play this music with Creative Media Source from my player when he is connected to my PC.
Anybody has a solution? How can I "make understand" to my player I have the license of this music? Of course I am going to give you precisions if necessary.
Thanks.

Locked music must be transferred with either MediaSource or Windows Media Player.

Creative MuVo T200 Starter Pack 1.52.01 (MuVoT200_PCApp_CLA_A4_1_52_01.exe ) relea

Hello Everyone,
There is a Creative MuVo T200 Starter Pack .52.0 released.
Release date : 6 Nov 08
File Name : MuVoT200_PCApp_CLA_A4__52_0.exe
Filesize : .23 MB
This starter pack is updated with the latest software and User's Guide for your Creative MuVo® T200 player. It adds an audio playback feature in Creative Media Lite. For more details, read the rest of this Web release note.
div id="DetailedDesc" The starter pack includes the following:
Creative Media Lite (.52.0)
Rips CDs, transfers media files and controls your player's volume restriction level.
User's Guide
Provides information on using your player.
Enhancements:
Adds an audio playback feature in Creative Media Lite.
Enables you to drag and drop audio files to and from your player using Creative Media Lite.
Fixes unreadable tag properties of audio files in Creative Media Lite.
Requirements:
Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2 or later
USB port
Creative MuVo T200 player
Note:
To install this starter pack
Download the MuVoT200_PCApp_CLA_A4__52_0.exe file into your local hard disk.
Close all application windows that are currently running.
Double-click the downloaded file and follow the instructions on the screen.
Message Edited by Loi-CL on -06-2008 06:2 PMMessage Edited by Loi-CL on span class='local-date' -06-2008 span class='local-time' 06:4 PM

Creative MuVo Question

Hello, i just got a creative muvo TX and i love it. But i dont get something. Whenever i try to play a WMA file on it, it just skips over it and plays the next song. why is this? please let me know

Mash,
Are these WMA's downloaded from a music store or ripped within Windows Media Player? It may be that they have Digital Rights Management on them. If so you will need to make sure you are using Windows Media Player or MediaSource to transfer them and not just drag and dropping. DRM protected files requires a transfer using one of these two programs. Otherwise they don't play and just get skipped.
Jeremy

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Error with the creative Muvo V

hi,
my new creative Muvo vidz screen is slowly turning black, it happend on my old one as well and bought a new one, now this one which i have only had for 3 weeks is now doing the same.
any help is greatly appreciated.
Thank you
Kiara_C

http://img3.imageshack.us/img3/7500/linemn8.jpg
That is where the line is. Sorry for poor image quality, camera can't really get a clear image when zoomed/moved to that close. But you can see roughly where that brown line is, as pointed out by the white arrows.

I am not able to format my creative Muvo V100 model mp3 pla

Hi
I am not able to format my Creative Muvo V00 model Mp3 player.As i connect it to pc to format it is showing the icon but when i right click on that icon to get the format option it is not responding?me.More i tried in windows explorer also there also it is not responding to my instructions.So please suggest me which?antivirus will resolve my problem.
Even i dont know how to upload my firmware..Can u suggest the site where that firmware will be available for me in free of cost. I need help please call me 996957368

rusaus: I'm guessing there aren't a lot of MuVo? owners here. You could try the manual (which you can download here I think), or ask the same question over at JumpingCholla's Usenet server which definitely has some MuVo? owners.

Creative MuVo TX FM - powers down when scrolling (how to f

I recently purchased a 28Mb Creative MuVo TX FM and thought I might share my experience with other members of this forum.
Not being experienced with MP3 players I duly followed the instructions and copied some wma files from my XP PC onto the MP3 player via USB / Windows Explorer, preset the FM stations and I was away. Oh the joy of having it work first time!
However, whenever I fast forwarded 3 songs or rewound about 4 songs using the scroller, the unit would instantly power down without warning. I thought it was a damaged file (or two) so deleted what I thought were the damaged songs ..... without success. The battery was brand new and the indicator on the LCD showed a full charge but I changed it anyway, without success. Oh the agony of new technology!
So I pulled out the CD, read the manual, found the creative website, found this forum and then ..... nothing! I did a search on the forum and found one other person who had similar problems (there may be more but maybe it was my search words) but I couldn't find a suitable answer. There is nothing in the Creative Knowledge Base and insofar as I can see, no relevant FAQ's.
Back on the Creative webpage I found a firmware upgrade here and after downloading and installing the firmware upgrade (and a reformat courtesy of the upgrade) and reloading the songs, hey presto! Problem solved!
So thanks to Creative for the support and if you are experiencing the same problem (auto shut down when scrolling), try downloading and installing the firmware upgrade per the link above.
Andrew.

Interesting...
I'm glad you were able to solve your problem. I received my MuVo TX FM 52MB with firmware .2.04 and upgraded it to .3.03, but fortunately never had your problem.
Do you know which version you used while experiencing the shutdown-problem?
Not that it is important to me, I'm just curious.

CREATIVE MUVO TX FM firmware version 200

I see new firmware for Creative MuVo TX FM . Update it now for new support with Microsoft? Windows Vista? and more .
Creative MuVo TX FM Firmware .24.02 ,
This download contains an improved version of the firmware found on your Creative MuVo? TX FM. It improves your player's compatibility with Microsoft? Windows Vista?. For more details, read the rest of this web release note.
Added Features or Enhancements:
* Adds FM recording (for players with firmware .23.03).
Fixes:
* Enables your player to detect downloaded audio tracks after your player is formatted using FAT32 (Windows Vista RC and above).
Requirements:
* Windows Vista, Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
* Available USB port (version . or higher)
* Creative MuVo TX FM
* For Windows 98 SE only: Creative Mass Storage Driver .07.00.250 or later, available from the Internet
Notes:
* This firmware only works with Creative MuVo TX FM players. Do not install this firmware for other players.
* You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware.
* To install this firmware:
. Download the MuVoTXFM_PCFW__24_02_a.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.
This new firmware is good , i was update it and i not see errors for my CREATIVE MUVO TX FM .
I have a 52 Mb CREATIVE MUVO TX FM . And i like it .
Thank you Creative Technology Ltd .
Have a nice day .

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

1GB sd card for Creative Muvo Sport C100 questi

I want to get a GB sd card for a Creative Muvo Sport C00. I was thinking of getting it from amazon. Can anyone tell me
)the name of ones that will works with the Creative Muvo Sport C00.
2)the best one I should get (or should I just get the cheapest).
Thanks

It sounds like something got corrupted in the memory. I would reformat and transfer the music again. Won't take long ... 256MB with 50-ish tracks at USB2 speeds is quick.
jake

Creative MuVo TX FM prob

i have a problem with my creative muvo tx fm.i have full battery and i turn off my mp3 player.then i dont use it for 2-3 months.the next time i turn it on my battery is all out even though i didnt use it!im sure it doesnt turn on by accident or anything.i use the duracell procell triple A batteries.can anyone tell me whats wrong or how to fix this?is it my battery?
Thank you

Duplicate post.

Creative MuVo v100 cleaning

Creative MuVo v00 cleaning So I have the Creative MuVo v00, gb model. I've had this mp3 player for many years, and enjoy it greatly. It still plays music fantastically, and I love the design. I wish they still made mp3 players with this design. I would love to get an 8gb device with this design, but alas it does not exist.
Anyways, over the years of having this mp3 player in my pocket EVERYWHERE, dust has built up on the inside of the screen. Between the outer screen and the inner display. It is at the point now where I can't make out the display anymore. I am wondering if there is a way I can safely clean this. Is there a way I can remove that screen cover, clean it, and then replace it, without destroying my Mp3 player?
Any and all advice is greatly appreciated.

mine is/was pretty dirty too. ?It recently got wet and stopped working. ?After letting it dry for a day, it still refused to work. ?In desperation I dunked it, without the battery half, into slightly soapy water and shook it vigorously, ?After spending another day drying, it worked! ?And the screen was even a little cleaner. ?Obviously, dunking your otherwise perfectly working MuVo into water to clean the screen is not something I would recommend. ?But it worked for mine.

Creative MuVo TX SE (1 GB) supports which USB 2.0 - type (low-,full-,highspeed

Hi there!
I would like to buy this player, but there is one thing I am still thinking about.
This player supports USB 2.0, but which type?
I mean, there are players which *seem* to be fast, but they are only compatibel! to USB 2.0, so one can use it, but not at the expected speed (only at USB .).
There are 3 "speed types" of USB 2.0:
lowspeed (,5 Mbit/s)
fullspeed (2 Mbit/s)
highspeed (480 Mbit/s)
And when the description of the Creative MuVo TX SE ( GB)is right, it should support highspeed, right?

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

Creative muvo txfm creative media sou

Similar Messages

Maybe you are looking for