Creative MuVo2 1,5GB - Listen Probl

Hello,
i've got the MuVo2 ,5 GB (the little blue one).
The MP3 Player worked always perfectly but since Month when i put in the headphone and start the player, the music quality is very bad.
Now i bought a new headphone and i've got the same problem.
When i rotate the clip of the headphone in the player around at one point i've got the normal qualitiy. the player is now over 3 or 4 years old.
What can I do?
The Serial Number in the player is: MPF036044000226V
Thanks for your help and sorry for the bad english I'm from Germany.. ;-)
Tanzbaer

There's a limit with the MuVo players of 28 files in the root, so chances are there's the same file system limitation with the MuVo?. The way to get around it is to simply use folders to organies your files, so delete at least some files then you should be able to create folders.

Similar Messages

  • Creative Zen Micro 5gb Hardware Probl

    I bought my Mp3 plater just after Xmas and already it has refused to work. What happened was that when I tried to switch it off, the screen froze on the shuttign down screen, this lasted more then /2 an hour..so I decided to take out the battery and replace, it's now saying that there is a hardware fault and won't play.
    I have not had any bumps major drops with it.
    So what could be the problem.
    I can't even get into recovery mode.

    i have the same problem posted for my 40GB. it sounds like the support is bad with this company. SSR, you seem to have a lot to say, but it usually ends up with contact support. have you actually had any experience with support that was good? i have just been told that i will have to spend $88 to fix a unit that only cost $206 a bit over a year ago. i cant understand why there is no cooperation from creative to coorect what appears to be a serious reoccurring problem. is there any action a group of customers with the same problem can take? any ideas out there? it doesnt seem to make sense that we spend a couple hundred bucks and have something lasy a year or so, and then spend another couple hundred bucks to either fix or replace it. i'd love some feedback.

  • Creative MuVo2 F

    hey people...i have a creative MuVo2 FM and i was listening to it when it only had one bar of battery left. As i kept listening to it, it died and now i can no longer turn it on and i have misplaced my charger. Also i have a Zen MicroPhoto and it says that I can charge the MuVo2 FM via usb cable but doing this does not charge the battery.. Can anyone please help me? Do i need to buy a new battery? please help anyone..
    Thanks
    Chris.

    Chris,
    Other than suggesting you to find your misplaced charger so you can charge your player, I don't think there is anything else to suggestion. The MuVo? does not support USB charging in a similar way as the Zen MicroPhoto player so a USB charger won't work with it.
    Jason

  • Nomad Muvo2 fm (5GB) should I buy

    I'm thinking of getting the Nomad muvo2 fm (5GB) I know it's a older model but its stats still shape up pretty well. Can any one give me reasons not to buy it's Or if they have had problems with them.
    I'm worried about buying the Zen Micro because of the problem with jack.

    I generally hear good things about the MuVo?, there are of course some players that have had problems like any player.

  • Creative Zen Micro 5GB Not work

    Recei'ved my Creative Zen Micro 5GB last week. It worked for hour total. !!!!!!-Then the screens froze. Al I have now is the Creative logo. Recovery mde does not work( Have tried this on numerous occasions). Also Creative Zen hardware not recognised by my lap top. <HELP<!!!!!!!! What do I do now?

    send/take it back to where you bought it from for an exchange ... sounds like it could be a problem with the hard dri've ... dont worry too much , and i know its a pain but it'll be worth it in the end !!

  • Creative Zen Micro 5GB vs Creative Zen Micro SE 6

    hi i am interested in creative Zen micro, but i am worried about its many problems.
    a fruend of mine has just bought a creative xen micro 5GB, but since his 2nd day of use the player is having a great problem with jack connection: the headphones, by one side, dom't work, and it is a jack problem an d not a haedphones problem.
    I wanna know if the same problem occurs with Creative Zen Micro SE 6 gb, or if it is only a problem for 5gb, and what is the maeaning of "SE" (maybe Second Edition) and if this "SE" models have the same problems of the former players or if they are "patched".
    I am sorry for my english but I am italian and I hope that my question is celar and understandable.

    In short, no-one knows.
    Folks here have posted emails supposedly from Creative employees that say it was fixed in later versions, but Creative Support said here that basically hardware updates are made all the time (so didn't answer the question directly).
    SE = Special Edition I think, although there's nothing particularly special about it and it has less accessories than the original version.

  • Muvo2 1.5gb probl

    hey all. my muvo2 .5gb is acting up.
    right. when i turn it on, it continues to the loading music screen and it'll hang. i can hear the harddisk working it's ass off but it sounds like its stuck. i go to recovery mode and try to reload the firmware + clean up but it all didn't help. am i the only one with this problem? and any idea how to remedy it's i really need my mp3player to study! hahaha
    thanks in advance!

    oh bugger. that's the only way? argh. jurong here i come.
    haha thanks man. oh btw, did they say what caused that to happen?

  • MuVo2 1.5gb fm radio prob

    I have a .5gb muvo2 ;when i am trying to open fm radio it says "insert wired remote" but i already inserted it so what is the problem.
    Note:Wired remote is works for changing songs or sth like this.
    Message Edited by KorayBJK on <SPAN class=date_text>03-03-2005 <SPAN class=time_text>07:29 AM
    Message Edited by KorayBJK on 03-03-2005 07:42 AM

    I guess it depends on the problem. If you still have a warrenty then you dont have to pay. But i guess it depends on what is wrong
    I recommend emailing supportMessage Edited by Bloodangel05 on 04-7-2005 0:2 PM

  • A question for Creative Muvo2 FM

    Will Creative ever going to create & released an LCD Remote Control for this model? Why haven't they bundle a remote control for this mp3 player just like its previous models like the .5 & 4gb model even though they don't have FM.

    The MuVo? 5GB FM Player does come bundled with a wired remote. Did you purchase this as new retail package off the shelves? Check the package content listing on the box and see if it's written there.
    Jason

  • Creative Zen Micro--HOLD button proble

    Is anyone with a Zen Micro also having problems with the hold button? Mine only works when the player is on. Once I turn the player off, it automatically turns on again. It's very strange. Then when I'm actually able to push it to hold after it's shutdown it just starts up again and maintains that it's on hold (I can't press any buttons on the touchpad). I've tried to reach Creative CS but it's busy or I wait forever. I've come to the desperate point of taking out my battery every time I finish listening to my player. Otherwise I end up with no battery power because it's in my pocket, playing all day while I'm at work.
    Anyway, if anyone has had this problem and can hand over any suggestions, they'd be greatly appreciated.
    Thanks,
    AMessage Edited by ailngale on 0-02-2005 06:0 PM

    i have also expericend thisproblem with the player turning itslef on even when its on hold, verry annoying as the battery runs down,
    But i would not worry about this problem in comparrison to my Zen micro not even woring as the headphone jack is loose.
    REGARDS andy

  • Can someone recommend me a good creative sound card for listening to music

    Hi all,
    I am thinking to buy a Creative sound card for my new PC.
    I have browsed the Creative web site but found out that there are just too many options for me to choose from, like X-FI, e-MuRecon3D Fatal1ty Champion, Recon3D PCIe, E-MU 1212M PCIe.
    I have no idea which one is the best for me since I like listening to music.
    Please give me some advice.
    Thanks
    Kitty.

    It's ultimately going to depend on how particular you are, and what output you're going to be using.
    Arguably the X-Fi Titanium HD will give the clearest output of the whole lot. A measurable 122dB SNR means you'll basically have to turn it up to the threshold of pain before you'll hear any noise produced by the card itself. That doesn't mean there won't be any noise at all in the output - just that the card realistically won't add any that didn't already exist in the source material. Further to this, when run in Entertainment mode you'll also have access to the THX enhancements over the standard Creative ones, which I personally find to be substantially better in actual listening. The EMI shield and changeable op-amps are just gravy.
    Of course, there's always fine print. The 122dB SNR only applies to the front outputs, for example. That's not to say the rest aren't very good - they're rated at between 115dB and 118dB - just that they aren't as good. Odds are you won't really care but its still worth mentioning. The other major limitation (in my opinion) is the absence of a good headphone pre-amplifier, but that may or may not be a non-issue depending on whether you use headphones or already have an external one (or, like me, you feel inclined to make your own to solve that limitation).
    The other good option would be the Recon3D. I wouldn't bother going with any of the upper market ones for music (or for any reason, for that matter) unless the front drive bay or directional microphone are of any particular importance to you (NB I bought the Fatal1ty Champion edition - still not entirely sure why). An argument could be made for the EMI shield, but with so few components on the board it probably isn't stopping a whole heap of noise anyway over the miniature "shield" on the SPU itself. When compared in raw specs to the Titanium HD, at a glance it would appear to be vastly inferior - 102dB SNR ratio (albeit constant across all outputs) is quite a bit lower, after all.
    However, it's important to keep in mind exactly what that means. 102dB SNR still means you'll have to turn the volume up quite a bit to get any extra noise added to your output. You're talking around the volume of a power saw at a little over 3 feet, so realistically it's quite loud - and it's over the level which is generally considered to cause hearing loss with sustained exposure (95dB). You also have to remember that this doesn't apply to the S/PDIF outputs (nor does the HD's 122dB) since they're entirely at the mercy of whatever decoder you're using, so if you're using that output than the extra expense of the HD is pretty much entirely wasted. And, as a major plus, all Recon3D cards have what seems to be a pretty decent headphone pre-amp, which makes a very appreciable difference in listening, as well as supporting the various THX enhancements.
    The short version:
    - If you're listening mostly via stereo analogue speakers, get the Titanium HD.
    - If you're listening mostly via headphones, get the Recon3D (I personally think the pre-amp is better than the higher SNR).
    - If you're listening mostly via S/PDIF to an external amp, it doesn't matter (but get the Recon3D because it's cheaper).

  • Creative Zen products and "Frozen" probl

    Hi,
    I'm one of many owners of the zen micro who faces this very problem. I don't really want to caveman it but it seems like creative is intent on not really helping as I don't see a FAQ or an answer to this oh-so-common problem anywhere on the website or doesn't give tech support on products older than 6 months (which is a very short amount of time for an electronic device that costs almost as much as month of my rent). Would you please be so kind as to indicate me the proper technique to fix this?
    Because you see I bought an iPod following the departure of my zen micro and it's been working really well so far but I'd really like to make use of the money I spent previously as a backup player and I don't think it's fair that a problem so common seems to get ignored.
    A brief example, early playstation 2's optic dri've were a major problem, most of them broke in x years/months/days. This was a known problem which anyone using a playstation 2 of that generation would experience at some point. I bought a PS2 second hand which managed to work for 3 years and bam the optic dri've stops working. I call Sony and I get told "mail us the unit, this is known problem and we will fix it for you". Granted it did cost me 5$ to mail the unit, I was very satisfied with Sony's service and now own a PlayStation 3.
    My Creative Zen Micro breaks in a common way and I get told to either smash it hard and have it work for a few more weeks, or I mail it, pay for pieces, repair and mail-cost to have it work for... less than 6 months apparently? I am lost for words, I truly am! Please provide us with a solution because I believe most people using a Creative facing this problem do NOT intend to buy another Creative product.
    Thanks for reading this long text, but I believe it's a fair review of the situation,
    Khanate

    Hey,
    If you tried it on a friend's computer and you're still having problems then it may be a problem with the Zen. Before you call or e-mail tech support, here is what they will tell you do to first before they really get in depth with helping you. Go into Rescue Mode (there is an explanation on how to do this at the top of the forum) and do a disk clean up. After that, try it. If that doesn't work then click the reload OS option which will take the firmware (like windows to your PC) off the Zen. Don't worry you can easily put it back on. Go to Support>Downloads>select Zen Touch, etc, etc. and download the latest firmware and run it. Hopefully that will fix it....
    I had some connection problems myself with my ZT as soon as I got it as well. and simply reflashing the firmware fixed and now I love my Zen. I hope everything works out for you.
    Wilco

  • Creative Muvo2 FM freezing on start

    Hi everyone,
    If anyone can help me with this I'd greatly appreciate it. My muvo froze the other day on a song, and wouldn't turn off - after removing the battery and replacing it, it gets stuck on the 'Muvo2 FM' screen won't do anything else, and it doesn't get recognized on a PC.
    Any ideas? I'm currently in Thailand on holiday, so am unable to check with customer service or warranty info.
    Thanks!

    Thanks for replying Glenzen. I've tried that a few times, as well as just connecting it to AC without battery, and just USB, but it keeps freezing on the Muvo2 screen. Oh well, biggest pain is all my music is lost now!

  • Muvo2 FM 5GB Charging Prob

    hi, my friend just gave me the above player, i had problem charging the player using USB player,?when i connect it to my pc, it only sync between the pc and player for transferring files but it's not charging at all, how do i go about to charge the batt? do i have wait till EMPTY battery before i can charge it's?please kind advise thanks

    Double click on My Computer and then right click on the MuVo2.
    Click Eject, but leave the player connected, it should then charge.
    Leave it attached until it's full (3 bars).
    Careful charging via USB as it must have least one bar of power before you can start to do so.

  • MuVo2 FM - 5GB - firmware er

    My MuVo show up firmware error massage. I tried all recovery function but it doesn't work at all. I downloaded firmware for MoVo 4gb (no firmware for MuVo 5gb on website). While installed, the program can't see MuVo and keep asking for connecting to MuVo even I can see and use MuVo as a storage dri've at the same time.
    Please help me.

    j3322,
    I would suggest contacting support and check with them if they have the firmware available for the player.
    Jason

Maybe you are looking for

  • Can I return my new iPhone?

    Hi all, Can I return my new iPhone 4? I have had it for a week, and just wondering if I can return the phone, and how that would work with AT&T? Why, you ask? I think overall the phone has sub-standard quality, at least what I had grown used to with

  • Desktop.open can not open the file with unicode letters in the path?

    String filename = "/home/wenkai/received/测试.txt"; try {      File file = new File(filename);      Desktop.getDesktop().open(file);      } catch(IOException ex) {           ex.printStackTrace();           return;      }"测试" is just Chinese word. Now,

  • Display line item based on GL Code in BPS.

    Hi Experts, I have one requirement for BPS. When the user Enter Plan data, it will prompt a variable 0GL_ACCOUNT for user to enter the gl code. Based on the 0GL_ACCOUNT code selected by user, the system should be automatically display the line items.

  • Mouse click event error in my program

    i'm writing a tic-tac-toe game with GUI TicTacToeGUI extends JFrame implements MouseListener when i click the mouse for the first time all is fine the program works for this click but when i click the second time the following errors occur same error

  • Jar file corrupt  error in JNLP

    Hello there, I am developing a java swing application which i wanted to make it available on our corporate network for demo purpose. The java application uses oracle 10g database which i made it to run with web start i.e converted to jnlp.now the jnl