Creative PlayCenter "Album Not Fou

I am unable to play CDs with the Creative PlayCenter. The CDS are store retail products. A message appears on the PlayCenter saying "Album not Found", also The D: dri've says "unsupported disc". However, CDs play fine with Windows Media Player version 9. I reinstalled the Sound Blaster Li've Value Digital 024 software, but the problem is not fixed. Also, I ran the Sound Blaster diagnostic program and CDs play fine on the diagnostic test using the D: dri've as the source. The PlayCenter used to work OK, so I am thinking that a Windows update may have caused the problem. My computer is a Dell with Windows 98SE and the sound card is a 32MB NVIDIA TNT2 M64 Graphics card. All of the hardware and software was installed at the factory when the computer was purchased in 999.
Thank you.

The only recent updates that I've been hearing which are causing many problems is a Flash Player 8 upgrade. I do not know if this is your issue, but PlayCenter should work. Try updating the firmware on your CD dri've via the Manufacture's website. Also, isn;t there a Creative CD update application? Perhaps try that. Let us know. Perhaps reply back with more info. What version of PlayCenter is installed?

Similar Messages

Creative ZEN, Albums fused, does not sort albums correctly!

;Creative ZEN, Albums fused, does not sort albums correctly! http://nl.creative.com/products/prod...t=6999&listby=
Creative ZEN, Albums fused, does not sort albums correctly!
I attach my Creative Zen to my computer true USB,
I manually copy Albums to my creative zen.
If i view my (ZEN) folder in Windows XP, everything looks great and sorted!
I safely remove my ZEN player from my computer,.
The ZEN rebuilds his data.
I go and view albums, and what do i see each time! over and over again!
Albums fused together, albums scattered true each other, MOST albums got different names then in windows XP!
I get really frustrated from this! how can i make this right!
I want the ZEN to show the albums like in WINDOWS XP! how hard can this be!!!
Thanks for the help in advance!
Greetz!
Support4u

Hi,
The Creative ZEN organizes songs according to the ID3tag of the music file, not by folders. If you want to arrange the music files in the order you want, please check and make sure that the music files are tagged properly. You may need a third-party tag editor to do this.

Got My Zen Sleek Photo! Now... Creative Playcenter

I have just got my Zen Sleek Photo this morning (yay! its really, really good by the way) replacing my broken original Jukebox Zen, the original Zen used Creative Playcenter, which I am used to and really like, this sleek uses Creative MediaSource which I don't like, is there any way in which the Sleek Photo, or Sleek if you have one of those, can connect with the Playcenter software?
If this is not possible then could you possibly help with the fact all the music files are stored in folders like on windows explorer, when looking at it on creative media source, this makes it ultra extreme to organise in my opnion.
If i havn't explained that very well, just say, and I'll give you some more details, as I'd really like some help with this, also ask me what you want about the Zen Photo if you want to know about it.

I'm afraid that isn't possible, Playcenter is an old application and was replaced with MediaSource, Playcenter isn't compatible with newer players.
I think what's happening here is that the interface you're seeing is different to the old ones, partly because MediaSource is new, but also (mainly) because the player is an MTP-compatible player, so it'll be a little different to the way the older players behaved.
There should be another application included with that, Zen Media Explorer. You can also use Windows Media Player 0. Perhaps you could try those and see if you prefer them.
Cat

Closing Creative Playcenter causes Kernel32 er

The program is Creative Playcenter v.0 that came with the computer withthe "Sound Blaster Li've!" audio card / DVD cd package July of 99 when thecomputer was built. It's a PIII 450MHZ Intel Processor using Windows 98,first build I believe. Gigabyte 440BX/ZX slot motherboard, Western Digital8GB hard dri've, 52 MB SDRAM. Parts wise that's all I can think of thatis relevent. The computer has not been modified since it was built. Itdoes that kernel32 error EVERYTIME the program is shut down, but thecomputer will continue to function normally after the error the box justhas to be moved out of the way. But scan disk on thorough scan NEVER findsanything wrong even after it happens and the computer is rebooted, and thecomputer always boots up normally every time after the error. How can Iget this bug to go away? This is the only program that ever causes akernel32 error when I use or close it, and it always only happens when theprogram is closed, never when it's being used.CTPLAY illegal operation error message:CTPLAY caused an invalid page fault inmodule KERNEL32.DLL at 05f:bff9d709.Registers:EAX=c00300f0 CS=05f EIP=bff9d709 EFLGS=000022EBX=0068fe28 SS=067 ESP=0058ff04 EBP=00590a0ECX=00000000 DS=067 ESI=00000000 FS=a87EDX=bff76859 ES=067 EDI=bff7998 GS=0000Bytes at CS:EIP:53 8b 5 dc 9c fc bf 56 89 4d e4 57 89 4d dc 89 Stack dump:

Poetrydiva
Try updating your Playcenter to a newer version. Go to the driver download page.
http://us.creative.com/support/downloads/
Do a search for this filename - PlayCenter3_02_52.exe
Jason

Sound blaster Audigy LS, creative media center and creative playcenter wont install on

Hello. I have a sound blaster Audigy LS card in my computer, it came as a bundle in my Sony Vaio that I bought in october of last year. I wanted to download the creative media center, or the creative playcenter. I went through the process of downloads and support and tried to run them on my computer it either says Setup is unable to detect supported product on your system. Click retry button to redirect your device and continue the installation. I've tried clicking retry and and the same message comes up. I have Screenblast Sound Forge . for VAIO and Screenblast ACID 4.0 for VAIO and wonder if thos two audio programs (came with the computer also) are in conflict with installing creative products? The operating system i am using is windows xp media center edition version 2002. Thanks in advance for anyone that can help me.

Hi All,
I am pretty much in the same boat but with an Audigy 2 Value Sound Card.
Removed some old piece of rubbish card (6MB Aztech PCI 288 Q3D using a Trident 4DWave-NX Chip.... yes about 6 yrs old !) in my daughters pc and replaced it with the new one.
Same error message i.e. hardware not detected... ihave already posted as im trying to find and install the right drivers. I have also tried the PCI-slot hopping etc etc.
So what next people ?

Creative playcenter driver 2.5 needed for dap juke box cannot find on creative webs

I can only find version 3 but this will not install from v2 of play center.
i need this to upload mp3s to the player, the player is an old 6gb model no: DAP6G02
thanks for youre help
Cidshock

I have exactly the same problem, I have the DAP jukebox (6 G) and I use the Creative PlayCenter 2 software to transfer mp3 files to the jukebox (there is no other way of doing it). I use Windows XP now and when I open the program it says that I need to upgrade it to version 2.50 and that the update can be downloaded from the creative site but i just can't find it ANYWHERE!! I have already sent an e-mail to the support people and tried to contact them by phone but they are on holidays. Anybody can help us with this?
Thanks in advanced.

Creative Playcenter wont install. I have an older Sb LIVE card with no softw

My center speaker is not working. Many people here state that activating CMSS will make it work. I however no longer have my SBLIVE software. I downloaded the Update to Creative Playcenter but it would not let me install it. I need a previous version!!! Is there a way around this?

Dude, I was not shouting back at you. I put Creative player in caps to emphasize what I was asking. Thanks for the help but those files do not contain Creative Playcenter. You can not be assuming I was yelling at you. If I was everything would be in ca
ps.
You need to step back and enjoy the forum. I am in no way yelling at you. Just relax. And thanks for the help.
And since your not going to reply anymore. Does anyone out there know if this will make my center speaker work. Someone stated that the CMSS feature I believe in Creative Playcenter will solve the problem?
Message Edited by apopilot on <SPAN class=date_text>07-3-2005 <SPAN class=time_text>:23 AM
Message Edited by apopilot on 07-3-2005 :24 AM

Adobe Creative Cloud does not support Bootcamp by Apple IOS operating system, but does work with boot camp Win 8.1 why"

Adobe Creative Cloud does not support APPLE latest IOS operating system, but does allow Windows 8.1 to be accepted. This seems a shame to me, as
Apple IOS is the leader in graphics, photography. The advertising states it is usable under both APPLE IOS and Microsoft 8.1 windows operating systems. Adobe Support Chat Sooraj tells me on 02/19/2015 that i must buy two computers to have it operate on both operating systems. Adobe will not support apple's Boot CAMP allowing both operating systems.
i love the apple product and love the ADOBE Photoshop CC, but it simply does now work with an apple keyboard and a WiN operating system. .[email protected] Adobe Creative Cloud

In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks

Creative MediaSource will not play certain MP3

I have a Creative Audigy 2 NX with a remote that I really want to be able to use. Programs such as GIRDER, WinLIRC, and uICE do not support the RM-500 remote control.
I can't figure out how to control the remote beyond editing and creating key files that send ASCII commands, but the problem with that is I cannot control programs that are not currently acti've. In other words, I cannot control winamp if I'm playing a game with my remote, which is what I want to do. The KEY files are structured as this:[KeyEvent690 etc]KeyName=whateveryouwantdisplayedNotification=- or 2 or 4KeyEventRemap=this is the important partHandleByApp=i don't know what this doesAnyway, if I set notification to -, I can send ASCII commands-- BUT these will not send to programs not currently on top. If I set notification to 2, as Creative did in their Winamp .x key file, I could control the program even if it is not on top-- BUT I DO NOT KNOW HOW TO FIGURE OUT WHAT THE KeyEventRemaps NUMBERS SHOULD BE. I cannot find this information, and I have tested as far as I am capable of doing manually (tested numbers through 500 MANUALLY).So what I want to be able to do is use my remote to control winamp, but that is impossible. And Creative MediaSource will not play streaming audio (for God knows why...). So what I decided to do was record to an MP3 player with a third party program and play that MP3 in the Creative MediaSource software (the built-in recorder will NOT work, as I cannot structure that into a playlist nor can I play the recording media nor can I minimize the program and mute the feedback-- I can only record if I'm playing, and this doesn't work). The first problem I encountered was several programs would not output MP3s that were playable as they were being recorded, however I finally did find one. This program, 3aLab iRadio, allows the MP3 to be played back WHILE simultaneously being recorded. The only problem is that this the Creative MediaSource software will NOT play the mp3. Out of the 5 different MP3 players I tested, ONLY the Creative MediaSource software would not playback the MP3 as being written. I cannot figure this out, and I am at a loss as to what to do next. I realize that Creative won't support streaming audio with their player, MediaSource, but what I like to do is listen to streaming internet radio as an item on my mp3 playlist in winamp. I wish to be able to control this with my remote, but as I cannot find ANY WAY out there to control my remote as I wish without further information, this is a dead end. My alternati've is to use the Creative software for which the remote was designed to work, but unfortunately this does not support streaming internet radio nor does it support MP3s that are being written to. This is driving me insane.
What I want to be able to do is have a playlist that I control with my remote, with the first item on the list being internet radio, the 2nd and such on down being MP3s. In winamp, this is doable, as well as in Windows Media Player, and most MP3 players out there. Since I cannot do this in Creative's software, I need a workaround alternati've. PLEASE.
So, in conclusion, is there anyone out there who can either tell me how to control my remote directly by identifying what the notification=2 keyeventremap=configuarions are, give me a program like girder however which supports the RM-500 remote, or tell me how to get MP3s that are being written to (aka incomplete) to play in the Creative MediaSource software?
Thank you very much for your time.
Message Edited by PzyX on 0-5-2005 08: PM

Sky_Blue wrote:
Hey ppl. I own a Zen neeon which i bought in Hong Kong. I can't play any of the tracks and i don't know why. Can i still transfer them to my mp3 or will they not work?
I am afraid that you need to provide more detail steps of your problem.Message Edited by micromouse on 0-04-2006 0:52 AM

I want to delete my old account: simon@s.dk and start over with my correct email-account: simon@fonsbo.dk, but every time, I try to by a plan or get a new membership, the site tells me, that Creative sui is not available in my country, the democratic repp

I want to delete my old account: [email protected] and start over with my correct email-account: [email protected], but every time, I try to by a plan or get a new membership, the site tells me, that Creative sui is not available in my country, the democratic republic of Congo!!!!, but I live ind Denmark. Hoew can I buy, and how doo I change my Adobe Id in my CC desktop. Ive tried for several days, but no matter which membership, I ask for, the answer (congo is the same. What to do???

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

Creative MediaSource Organiser not responding ¡HEL

Hello,
I have a Muvo v00 for a long time now, and it works great, but some time ago I installed the Creative MediaSource. It was working great for some days (really good for transfering the music from my computer to the Muvo, etc) and then one day it suddenly stopped working: when I started the Creative MediaSource Organiser, and imported files, I got an error window saying that the program encountered an error and had to be restarted. Since then I cannot use the MediaSource Organiser, although the normal MediaSource Player is working (one song at a time). Could anyone please help me solve the problem with the Organiser?
Thank you very much!
Alexandra

markomusic wrote:
Yes, while playing a song in Creative Mediasource for no reason the sound goes off completely. This affects all the sound for the computer. Quiting Creative Mediasource does not restore the sound, neither does restarting the computer. I have to use the restore defaults to get the sound back and this works immediately. As I said this problem has only started with the new drivers.
That is why I said that MediaSource is not the cultprit. The driver probably is the cultprit.

Creative Cloud is not acknowledging installed apps, is there a solution?

Creative Cloud is not acknowledging installed apps since the upgrade, all I am seeing is "install" or "try" buttons even for the apps already on my system. Nothing under "installed apps"
I tried this:
http://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html
but no luck. Everything is in the default locations. Is there a solution?

Please refer to the steps in :
Not all apps displayed for download | Creative Cloud desktop app, Adobe Application Manager
Re: Creative Cloud not showing apps.
Installed apps not shown as installed
Hope it helps you.
Regards
Rajshree

The upgrade of creative cloud is not possible because there is always the error code 204?

The upgrade of creative cloud is not possible because there is always the error code 204?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How do I copy artwork to iPod just once for an album, not for every track?

I don't download music. All my music is ripped from CDs that I own.
After I rip a CD, choosing "Get Album Artwork" from the Advanced menu normally works, and if not, I find the highest quality image I can from the web, and copy & paste that into the large box at the bottom left of iTunes.
It appears that iTunes stores the artwork image once for each track, not once for an album, so for example if an album has 10 tracks, the image is stored 10 times somewhere on my hard drive. This is inefficient, but not problematic.
However, when I (manually) select & drag-copy the resulting 10 tracks to my iPod, the artwork doesn't transfer along with the tracks. I then have to copy the artwork & having selected all the tracks on the iPod, paste it in. I have the "Manually manage music and videos" option selected, as I simply don't trust the automatic system. I want to supervise what is copied, when, and in what way. I don't necessarily want everything in my iTunes library on my iPod.
What concerns me is that for each album, the artwork image is stored repeatedly for each track on the iPod, like on my hard drive, not once for an album. As space will be at a premium on the iPod once I start copying more & more of my CDs across (I have only done 9 so far) the point will come where a large number of MB of space will be wasted on the iPod with duplicate artwork, which will mean that I'll be able to fit far fewer CDs on the iPod than would otherwise have been the case. The fact that I have chosen 192 kbps and the AAC Encoder for all my CD ripping also means that the iPod will fill up faster than if I'd used the standard 128 kbps and MP3 settings. I'm not prepared to go below 192 kbps though. My soon to be purchased Sennheiser CX500 earphones deserve that much!
Is there any way to force iTunes and the iPod to store the artwork only once for each album, and if there is, can this method be retrofitted to the CDs I've already copied to my iPod, or do I have to start again from scratch? I've already filled 670 MB with the 9 CDs, many of which are only 40 or 45 minutes long, so I'm already getting worried!
Alternatively, am I simply mistaken about all this? Does it only *look like* the artwork is duplicated, whereas it's actually only being stored only once?
Many thanks.

In reply to PT:
Why don't you paste the artwork to the track in iTunes first (fast) THEN send them over to your iPod?
I already do that. Every track has the correct artwork in place before I copy it to the iPod.
I ripped about another 10 albums yesterday. Most of the albums got their artwork automatically from the iTunes store. For a few I had to get artwork from the internet.
When I rip a CD, one of 3 different things happens:
1. The album get its artwork automatically from the iTunes store, and then when I shift-click all the tracks and drag them to the iPod icon, all the artwork transfers along with the tracks.
2. As per 1, except the artwork doesn't transfer when I copy the tracks to the iPod. I then copy the artwork from one of the tracks on the Mac, then shift-click all the equivalent tracks on the iPod, and right-click in the large box at the bottom left of the screen, and click on paste.
3. The iTunes store has no artwork for the album, so I copy the artwork from an image on the internet, shift-click all the tracks on the Mac, and right-click in the large box at the bottom left of the screen, and click on paste. I then shift-click all the tracks and drag them to the iPod icon. They all copy across, but the artwork never does, so I then shift-click all the tracks on the iPod and right-click in the large box at the bottom left of the screen, and click on paste.
Pasting the artwork to the tracks, in either scenario 2 or 3 above, takes ages (often longer than copying the tracks themselves) and a progress bar appears, listing each track in order as the artwork is added to the track, accompanied by the spinning beach ball. The slowness is mostly down to using USB 1.1, but for a 20 track album, it appears that the iPod is storing the artwork 20 times, once for each track, not just once in total (for the album).
It appears that in scenario 1 though, the iPod is only storing the artwork once.
In reply to Landon Dial:
well first you go to one track, right click and press get info. you go to where it says artwork, right click the image and press copy, then you exiit out of that. then you can press ctrl and select each song you want to have that artwork. if there highlighted then its working. then right click again and press get info. then go to artwork and press paste and it should have copied the image to all of your tracks
Thanks for your input, but you've completely misunderstood my question. I know how to add artwork to tracks. What I'm trying to figure out is how to force iTunes/the iPod to only store artwork once for each album, not once for each track, even if the artwork comes manually from me finding it on the internet, not automatically via the iTunes store.
In reply to Chris CA:
When iTunes gets the artwork, there is only one copy on your computer.
That single artwork is linked with iTunes to each song on the same album.
When you add artwork yourself, it is copied directly into the ID3 artwork tag for each song. If you have a 200kB artwork file, each song will be 200kB larger.
From what you say it sounds like there's no way to force the issue then. If you have to paste in artwork yourself, then it's one copy per track, not one per album. A serious flaw which I hope Apple will address!
Using playlists is very easy to manage what goes onto your iPod.
That's true, but I don't really have any need for playlists. I want 95% of what's in my iTunes library copied across (complete albums, with artwork). It's the remaining 5% (the odd individual track, amusing audio files, and other odds & sods) that I don't want copied. Copying things manually suits me fine, and I wouldn't consider another method unless it solved the problem that this topic is about!

HT1660 My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock

Creative PlayCenter "Album Not Fou

Similar Messages

Maybe you are looking for