Creative sb audigy, needs info on pins at the end of card

I am trying to install a panel that includes the sound card output and input connector for the panel. It connecting wire include about 5 to 20 connectors for the sound card, but it has no markings it to identify the pins on the board. I have been looking for the info for some time now and had no success. The info would be much appreciate. @7.68.93.24

=Re: creative sb audigy, needs info on pins at the end of card Those pins aren't for connecting to the front panel, they are for connecting to the breakout box that came with the Platinum version of the card. The pins for the front panel connections (if present on the card) is a 0 pin block usually in an inline config (you can pretty much thank dell for that connector becoming standard on Creative cards). If it helps any here is exactly how to use it,
http://audigy2zshowto.blogspot.com/
and if you don't want to make your own cable,
http://www.x-tap.com/
try searching ebay and you may find it cheaper.As far as the connector you are referring too,
http://www.driverheaven.net/audio-ge...ssignment.html

Similar Messages

When i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

when i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

Open FCP X Preferences / Playback / Use Original... Media / Playback Quality...
How does the exported movie-file looks like...?
Regards
Nolan

I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter

I need to have endnotes at the end with sections and numbering beginning again for each section. I also need to be able to write Chapter #s above each section of endnotes. How do I do this, please?

I have precisely the same problem and am wondering if anyone has found a workaround for what seems to be a bug or an unattended issue in Pages. Hopefully the next update (whenever it arrives, I hope it arrives soon) will take care of this.

HT2309 I need info on how to use a SIM card from another country to have service on iPhone 4 & 5 while traveling

I need to know any problems I might have getting a SIM card in another country and swapping it w current card in my iPhones (4 and 5).
Need both phone and internet access while there. My carrier has no service (verizon)
Also assume all apps and data on phones will still work?

The GSM section of your Verizon iPhone 5 is unlocked and will work with any nano-SIM card.
Not all iPhone features such as FaceTime, iMessage, visual voicemail, etc, may work if using a carrier that doesn't support iPhones. If using an unofficial carrier, you may need to enter APN settings to get cell data. LTE may not be compatable.

Help...trying to print address labels from an excel document. I only need info from some of the columns. Using Avery labels.

Help...I'm trying to print address labels from an existing Excel document that opens fine in Numbers. I don't want to print everything from the spreadsheet. The Avery template and site were no help. Any suggestions?

If you do not need all the excel specific items you can just write it to a spreadsheet using the write to spreadsheet file vi's.
If you want to go the excel route you will have to use active x. you can see a lot of examples on the excel board under the breakpoint forum. please post a sample of how you want your data to look and I can maybe help explain what options you have. and also oyu do not necesarily need the report generation toolkit.
Joe.
"NOTHING IS EVER EASY"

Inherited a older Mac Mini, Need info on reinstalled of the OS

Greetings all.
I was recently donated my first Mac, a Mac Mini A1103. It came to me with a bad hard drive, which I have replaced. My question is: how can I acquire (legally) the factory discs to reinstall the operating system?
Thank you in advance.

You can certainly use the black-faced retail version of 10.4 Tiger on the mini. What you don't get on the gray-faced original disks are the Apple hardware test, or iLife applications. You can always buy Tech Tool Pro, which can do much of the testing the Apple hardware test does, and it also fixes disk issues, that the AHT doesn't do. And you can buy the iLife applications separately, if you want them.
If you go that route, ensure that what you're buying isn't an upgrade disk, which was used when Tiger first came out, for systems that had 10.3 on them. You can also find older unopened mac software at http://www.hardcoremac.com
Also, you can run OS X 10.5 Leopard on the mini. If it doesn't have 1GB, though, you should upgrade the memory if you want to use Leopard (min is 512MB). It has one memory slot, and you already know how to get into the system. If you want to use Leopard, you can call the Apple online store 800-MY-APPLE and order it from them. Retail Apple stores don't carry it anymore.

What is the PIN in the itunes gift card?

?

I don't understand your question. Everything you need is printed on the card. You just enter the card number after logging in to your iTunes store account.

Help! Quiz - need to count score at the end

I have a working quiz but I want to know how to get the score of the number of correct answers the person got but I can't seem to figure out the code for it. This is my code below. Can someone help me?
stop();// movie clip waits on buttons
gloss_mc._visible = false;// set the gloss initially to not visible
score_int = 0;// score on the quiz is initially zero
// button functions
q1_btn.onRelease = function() {
    scoreQuiz_fnc("1");
q2_btn.onRelease = function() {
    scoreQuiz_fnc("2");
q3_btn.onRelease = function() {
    scoreQuiz_fnc("3");
q4_btn.onRelease = function() {
    scoreQuiz_fnc("4");
function scoreQuiz_fnc(ansSelected) {
    trace("scoreQuiz_fnc ("+ansSelected+")");
// define answer key
answerkey_arr = new Array();
answerkey_arr[1] = '2';// the answer to the question on frame 1
answerkey_arr[2] = '4';// the answer to the question on frame 2
answerkey_arr[3] = '3';// ... etc.
answerkey_arr[4] = '4';
answerkey_arr[5] = '3';
answerkey_arr[6] = '1';
answerkey_arr[7] = '3';
answerkey_arr[8] = '4';
answerkey_arr[9] = '1';
answerkey_arr[10] = '2';
glosskey_arr = new Array();// create array of gloss responses
glosskey_arr[1] = 'The correct answer is: Congenital heart defect.';
glosskey_arr[2] = 'The correct answer is: Four areas of the heart are defected because "tetra" means four. ';
glosskey_arr[3] = 'The correct answer is: Two left valves because there is only a right and left valve.';
glosskey_arr[4] = 'The correct answer is: Ventricular Septal Defect because this is when there is a hole (septum) between the right and left ventricles..';
glosskey_arr[5] = 'The correct answer is: Babies because this condition congenital meaning at birth.';
glosskey_arr[6] = 'The correct answer is: There is not enough oxygen carried within the blood which causes a discolouration in infants.';
glosskey_arr[7] = 'The correct answer is: Heart murmur because this condition occurs at the heart.';
glosskey_arr[8] = 'The correct answer is: After crying, during bowel movements or the occurrence of kicking legs in awakening.';
glosskey_arr[9] = 'The correct answer is: Shunt because you cannot place the other objects in a heart.';
glosskey_arr[10] = 'The correct answer is: Heart.';
function nextQuestion_fnc() {
    gloss_mc._visible = false;// hide the gloss
    nextFrame();// advance timeline to the next question
// score the answer selected by user
function scoreQuiz_fnc(ansSelected) {
    trace("For question "+_currentframe);
    trace("scoreQuiz_fnc("+ansSelected+")");
    //if the answer key for this question matches the answer selected
    if (gloss_mc._visible == false) {
        if (answerkey_arr[_currentframe] == ansSelected) {
            trace("Correct");
            score_int = score_int+1;//add one to the score count
            nextFrame();// go to next frame
        } else {
            trace("Incorrect!");
            // show the gloss
            gloss_mc._visible = true;
            gloss_mc.gloss_txt.text = glosskey_arr[_currentframe];// insert gloss from the array
            // end if statement
            trace("Score is now "+score_int);
}// end of function

Try this
Name the dynamic text box in var not at Instance name
You will find it in properties panel .By selecting the dynamic text field you will have some properties like var,single line ....ect
or
Try this one
this is your code : score_txt.text = score_int;
try this :score_txt = score_txt+1;
where score_txt is the instance name or the var name you are assigning to the dynamic text field where you will display the score.
Note: Change all of the dynamic text field name "score_int" in the script in to score_txt ,Because you have changed the dynamic text field to score_txt at the beginig of the script also you have score_int = 0.change heare also.
If your problem is solved mark this as Answered

Need info on Billing Outputs

Hello,
I need info abt billing Outputs - The language is maintained in Bill to party (Customer master), Its maintained in Condition record, It can be changed while creating the invoice.
Now my question is, which of the above three cases has got highest priority.
Could some one provide me some info on this?
Regards,
Krishna

By default, we will maintain language in Bill-to-Party & also Condition record. But if required, it can be chaged at Invoicing level while taking output. Priority will be Bill-to-party, followed by Condition Record.
Regards,
Rajesh Banka

Creative SB Audigy 2 ZS (Tremor) Sound C

Hey there! Seems like I'm having the same problems that others are when they get a Gateway OEM Audigy...
Gateway doesn't offer any software like Creative does, they just post the drivers? Drivers: 5.2.4.442 ...
I built my own little PC however the Audigy 2 ZS is Gateway OEM? So does that mean I can never get Creative's software? Because this is suppose to be a great card. & I've heard my roommates. But he has everything Installed were I merely have the drivers located --
http://support.gateway.com/support/drivers/getFile.asp?id=9860&dscr=Creative%20SB%20Audigy%20 2%20ZS%20(Tremor)%20Sound%20Card%20Drivers%20%20Re vision:%205.2.4.442&uid=96355720
Now it seems that the only way to get all the cool sound effects is to have everything installed that comes with the Creative Audigy, so I went ahead & tried installing my buddies software seeing that we have the ?same card? but it won?t let me, it keeps stating I don?t have an Audigy in there.
Is there anything I can do? Maybe bypass that evil message? I mean the card is there & it is this company?s product? So shouldn?t we have access to the software?
Please help!
Below are the drivers or what it says in my device manager.
& in my signature you can clearly see my PC?s specs.
Under: Sound, video and game controllers
Creative SB Audigy 2 ZS (WDM)
Under Driver Tab:
Driver Provider: Creative
Driver Date: 3//04
Driver Version: 5.2.4.442

Hi!
I appreciate the URL, but that is not what I was looking for.
I have that help files already. Also my unit is not the platinum.
I just have the card, and the picture I need is a closeup of the
rear bracket, so I can see, upside down, exactly what each connector is.
On most sound cards they are colour coded, and IF this one is, it is not visible.
And I have trouble seeing anyway ... OLD eyes LOL!
A few years ago there was an awesome full color, closeup, detailed photograph,
not a drawn picture on the net, somewhere, and I should have saved it then ...
The best laid plans! OH WELL!

Need info about RH Server 6 and reports

I'm interisted in RH Server 6 but I'm unable to locate much
practical info about it on the Web site, and a call to sales didn't
help. I need to know what I'm getting us into before I contribute
our $2,000. Can anyone provide this information or point me to its
location on the site:
--I have system requirements from the Adobe site, but what is
the "server" and what does installation and setup entail? About how
how long does it take, or how difficult, to achieve operability?
--According to a piece by John Daigle, the server component
should be installed on a Windows server running IIS 5+. Is IIS a
separate software or standart part of Windows server? If separate,
what preparation should that server have before the installation in
addition to installation of IIS?
--I know nothing about security/firewall protocols. We will
have our own and our customer firewalls to navigate. Are the server
setup instructions adequate for setting all that up? Or are
purchasers expected to have sys admins knowledgeable to set that
up? Is that applied to the RH server or the Windows server? if RH
server, how can I get a copy of instructions for my system people
to review?
--Have users found the RH server/RoboEngine reliable, once
it's operable?
--Is it true that the usage reports aren't customizable? Can
additional usage data be specified in the RH server?
--These report summaries are vague--Areas Requiing Help,
Frequently Viewed Content--stating only that repoorts show the
suchandsuch done "most frequently" or "most often." Does that mean
the top 3, 5, 10 or what? Is there a way to track all of that
activity from most to least?
--The summaries of the reports Unanswered Questions and
Frequently Asked Questions say that terms entered in the Search
field are identified. Questions and terms aren't the same in my
book--am I right that it captures anything entered? Can it do the
same for the Index field?
--I saw no RH server under downloads, or maybe missed it.
Correct in guessing that a demo version is not available?
--Is RH server user doc available on the web site? I found
the Getting Started gude, which isn't much use in evaluating the
product.
I have additional questions, but if you can answer these
questions or direct me to answers some of those may be covered.
Thanks,
Mike
Access database.

Hey, Mike!
I found a few things for you. I'm in a hurry, so I'll list
them quickly.
For the Trial, go to the Adobe downloads page
http://www.adobe.com/downloads/
Then select RoboHelp Server 6 from the dropdown list. You
will be asked to register (free) if you haven't already. When you
arrive at the download page make sure you note the Trial Serial #
To make it easier for you, its:
1336-1033-2628-5062-0993-4570
You can also find a RoboHelp Server 6 Getting Started Guide
here
http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
You were asking about IIS. Yes. As Colum says, this comes
with virtually any version of Windows Server (or Windows XP
Professional). However, you must install and configure it. I am not
an IT or web administrator so it took me a while to learn, but
amazingly I got it to work if you're patient and follow the steps.
(I'm speaking of both IIS and Robohelp Server) Clearly IIS
configuration is not a trivial thing and it is assumed that an
author would have help and cooperation from the IT or Web Admin
folks.
As for customizing reports. At present, the existing reports
are the only ones offered. Since these reports are generated from a
database (Access, SQL Server or Oracle) I would think (haven't done
it myself) that someone familiar with database adminstration could
open the DB (after a backup that is) and be more creative with
generating customized reports.
You are right that the "Question" does in fact mean any
search term or phrase that an end user puts in the search field.
This is the string that is stored and reported as a question. In
discussing this with the Adobe team at STC last month, they agreed
that this was definitely a holdover from the legacy software and is
due for a change sometime in the future.
To answer your other question, text entered in the Index
field is not stored in the database, only the search term field.
Since taking on the old legacy product from eHelp and
Macromedia, Adobe is focusing most of its attention on beefing up
the client authoring app for the next version (Adobe RoboHelp 7).
My assumption is that they are keen on improving the RoboHelp
Server as well. I have passed along many feature requests along the
lines you seem to suggest and hopefully the server will evolve
along with the client app.
Even with its limitations, my clients tell me RoboHelp Server
provides very useful feedback to help them improve their knowledge
base content to make it more helpful and responsive to users needs.
They also like the searchability of PDF, Word, PPT and Excel as
well...something which plain WebHelp without the RoboHelp Server
does not do.
I probably didn't get to everything, but hope this helps.
John

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2.

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2. make it possible for them to download it via a link on our website 3. make it possible for them to save the info they have written into the form and mail it to the mail we have supplied in the entry form and 4. make it possible for them to put in a jpg. as part of the entry for and lastly 5. make it possible for us to copy paste the document and use it on other platforms. How do I do this - is it at all possible with adobe?

Those requirements are go way beyond what PDF forms can do and are meant for, some of them would require involving other programs or are mutually exclusive and contradictory. You are wasting your time even thinking about doing this as an "offline" PDF form. Simply sign up for an online forms/ survey service like FormsCentral or Surveymonkey.
Mylenium

Creative Soundblaster Audigy 2 Zs help

Before I start rambling on about my problem here are my specs (BTW I'm not incredibly computer literate; my dad helped me install everything before I left for school):Cpu: Intel Duo Processor 2.66 GhzRAM: .5 GB DDR2Video Card: ATI Radeon 9600 (soon to be one of their newer models)OS: Windows XPSound Card: Creative Soundblaster Audigy 2 ZS?Ok so I was reinstalling everything after I had to format my computer. I get through installing my creative sound card and figure everything went great. I was playing my music when I had realized that I forgot to configure my sound card for them, as I was getting mono instead of stereo (was only playing out of left speakers). So I go into speaker setup and click on "calibrate speakers" or something like that. Anyway, the speaker calibrator says that It could not be ran for some reason (i forget). I figure that it wasn't working because I hadn't updated anything yet. I update, and I still get the same message. So I reinstalled the software and updated it again and now when I try to run ANY of my creative software related to the sound card (I.E. EAX console, Speaker Setup) it says that "The Audio device supported by this software is not detected. The Application will now shut down."? Now remember that I'm not great with computers, so my solution now will probably sound stupid. But anyways I figured that I had installed the wrong sound card software (it gives me three choices on the disc). I uninstall everything and choose another setting. I still got the same problem. So I try the third choice and I get the same problem. Any suggestions? I've tried all three choices and I still get the same problem.

tony8gj wrote:
I have the SoundBlaster Audigy 2 ZS sound card installed in my Dell 8400 PC. Does anyone know what the latest SoundBlaster Audigy 2 ZS driver version is? I currently have driver v 5.2.4.445 and date 8.7.04 I've tried to install this from the Creative site: SBA2_PCWDRV_LB__84_55-R.exe but keep getting a "setup could not detect and sound blaster audigy 2 on your system" error. The driver on the Dell site is: Creative Labs SoundBlaster Audigy 2 ZS: R92022.exe Thanks! Tony.
Hi
You may first need to patch the driver package by using ctcomp.exe to get std. drivers (eg. not Dell specific) installed to your Dell PC. Search this forum after ctcomp.exe --> there you'll find some instructions too.
You can also find a link to the latest drivers available (I personally use Audigy 4 drivers from november 2005 --> can be found from creative support pages) by searching this forum (I think the latest WHQL version is .~62 for the original version).
jutapa

Creative SB Audigy 2 ZS (WDM)-Picture of rear panel nee

Hello,
I was wondering if anyone has, or knows where I can get a
picture of the back of the Creative SB Audigy 2 ZS (WDM).
The way I have my computer set up, I can not see the connectors
and which one is which.
Also, there are NO colors on the back of my card.
(and I am going to be looking at it upside down) -
I remember seeing a great closeup shot, but that was years ago
I should I saved it back then!
I also would like to know how many external inputs there are on that card,
and are they stereo and/or digital?
Thank you for any help you can give me.
I have been searching for a few weeks to no avail.

Hi!
I appreciate the URL, but that is not what I was looking for.
I have that help files already. Also my unit is not the platinum.
I just have the card, and the picture I need is a closeup of the
rear bracket, so I can see, upside down, exactly what each connector is.
On most sound cards they are colour coded, and IF this one is, it is not visible.
And I have trouble seeing anyway ... OLD eyes LOL!
A few years ago there was an awesome full color, closeup, detailed photograph,
not a drawn picture on the net, somewhere, and I should have saved it then ...
The best laid plans! OH WELL!

Erorr with Creative Blaster Audigy Value

hi
i have one
Creative Blaster Audigy Value.
but when im run creatvie graphic equlaizer see this erorr :
Graphic Equalizer
The audio device supported by this application is not detected. The application will exit.
OK
what am i doing?

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Creative sb audigy, needs info on pins at the end of card

Similar Messages

Maybe you are looking for