Creative Sound Blaster Arena Headset HS-1100 Windows 7 Volume Too Loud

I have a strange problem with my Creative Arena Headset. The volume level of it is too high.
To avoid hurting my ears, i have to set the master volume in the windows mixer to 4/00, this causes a problem when running other applications and adjusting volume. For instance, when running skype, the volume control within the application is literally either "off" or "on" and I can often here every bit of buzzing and background noise that I cant hear through my speakers seperately.
Also, because the volume has to be set at 4/00, the feature in windows to automatically adjust volume levels of applications doesnt work, so I cannot use the feature of automatically lowering the volume of music when chatting online.
This poses an annoying problem i have tried to resolve for a while now (ever since I have had this headset).
I am running the latest drivers from your download site: XFHP_PCDRV_LB__0_000 on the Windows 7 operating system.
I have also reinstalled the drivers and tried the headset on a different computer and it results in the same massi'vely loud volume.
Is there any reason my headset is so loud? Is there anything I can do about it?

@Dodgetimmy,
Can you try reinstalling the headset using the driver from the installation cd? You might also want to try using the generic drivers by simply plugging the headset to the PC without installing the Creative drivers to see if it makes a difference.
If it is still not working for you, Customer Support can be contacted using this email form.

Similar Messages

How to Disable SVM Sound Blaster Arena headset?

Hey all,
I bought a Arena gaming headset today. and i am very impressed by the quality of the sound. but that SVM is just annoying me! How can i disable SVM i have look all over the Entertainment Console but ?I cant find it..
I have looked on the web and on the creative forums i the only thing i can find is that you need a Creative sound card.. I dont hope this is the only solution. I my old SB Audigy 2 decided not to work ?anymore. so i really hope it isnt nessecery to have..
Thanks in advance.
-Rexel
PS. I also posted this thread on the headset section as I didnt know in what section i needed to post it.

I did have a Creative HS-1200 before this one. and I do think that SVM got enabled because the music fluctuede from loud to soft to loud again in some part of the music. And it is in every song i played so far.
I am going to uninstall/sweep all creative drivers and programs and clean install the drivers from the CD that came with the headset. If that solves the problem, I will report it back
Yours,
Rexel

Can I work 3 pci creative Sound blaster 5.1 card in windows Xp and

Hi Guys,
Please help me to configure 3 pci Sound blaster 5. card in windows Xp . I want to work simultaneously .
Regards,
Chrisdee

Hi,
I don't think this is possible though I do seem to remember one user running multiple cards and creating a web site with his experiences. Personally if you are looking for multiple i/o's i'd take al ookk at some of E-MU's offerings.
Hope this helps,
John

Creative Sound Blaster Audigy2 ZS freezing in windows 7

Hello to all Ceative sopporters, i have a problem with my Crati've Soud Blaster Audigy2 ZS, Sound is good im SB but all Sofware freezing every time when i am using eq Eax console Speakaer settings and other i can't remember so i need maybe patch or fix. any knows what i can do? ?

I re-used this Creative Audigy2 Platinum for my new built PC on Window7 64. Now on the new desktop; the rear or front panel plug-in is working fine for both microphone & headphone (I used same handheld Shure SM58 on the old PC, also Window7 version), but through headphones or speakers only. Unfortunately, in the Control Panel/Sound, the "What You Hear" or "Microphone" icons is there but it said "Current Unavailable". With that, I can't not mix my sound for recording or talk/broadcast live over internet. Please help! Thanks a lot

Sound Blaster Arena Headset Volume Buttons Not Working

Just as the title says. The Volume control buttons on the cord are not working. The lock and unlock for the mic is working, but I've tried all the suggestions I could find in the support website, but the volume buttons just arn't working. Any help would be greatly appreciated.

Kakiro wrote:
Just as the title says. The Volume control buttons on the cord are not working. The lock and unlock for the mic is working, but I've tried all the suggestions I could find in the support website, but the volume buttons just arn't working. Any help would be greatly appreciated.
they are not faulty mine are doing the same thing on windows 7 64bit. try it on xp they work fine. it is the stupid driver support of creative. They don't care about the customer

Sound Blaster Arena Headset Battlefield 2 Problem!

help me please.

Sorry, still can't see the picture. I would suggest that you write to Customer Support for help.

Sound Blaster Arena Headphones Problem - On and Off

I have a problem with my Sound Blaster Arena Headset. Its been working perfectly until yesterday. It keeps turning on and off in the playback devices but it stays off unless I replug the USB or switch USB ports. Then shortly after it works again it turns off again. When it says "No audio output device installed" on the list of playback devices, there is a static noise coming out of the headphones like a beat of a pulse. I tried reinstalling numerous times and still no difference. I also tried plugging in the USB in the back of the computer, but with same results, the headset becomes "unplugged" again. Thanks for reading and please try to help.

Yo, if you ever come back here(you last visited in March) We can probably help one another. The wires you are talking about are:
red/blue = V+ or volume up
red/green = MIC switch on/off
green/copper = G (ground for the LED)
FULL red = L or left earphone. I have this associated with tp7.
I have no wires connected to my circuit board. I have been using trial an error to identify what goes where. However I have been given ONE godsend. When the wires were ripped from the circuit board the white sheathed wire left a little section on the circuit board identifying it as tp5.
IF all you have is the four missing connections you could easily use trial n error. Touching the missing wires to each node.
for the mic switch. Open up ventrilo and get it listening for the mic.
process of elimination. Then you can do volume up. or get the led working by touching the ground to the nodes(possibly the easiest)
I'm going back to the drawing board with the the red wire.

Any ISOs for Sound Blaster Arena CD?

Hi, I got my Sound Blaster Arena headset last year when I started gaming. The drivers installed right away, so I didn't think I needed the CD. Recently, I've been reading on how to improve quality on the headset by installing some things that are on the CD, but now I can't find it. I think I might have thrown it out with the box (not that I have a CD-rom drive anyway).
Can anyone tell me what programs would be on that CD that comes with the Sound Blaster Arena? Does anyone know if I can get the ISO or the programs from an external source?
Thanks for any help

Hi,
You can find the drivers in the download area but some of the applications aren't available for download. If you are looking for the installation cd, you might want to write to Customer Support to see how they can help you with this.

Problem: Sound Blaster Arena Surround USB Gaming Headset

Hello
I have one of these Sound Blaster Arena Surround USB Gaming Headset, which are 7..
I have Windows 7 as OS on my computer and it gives me a few problems.
W7 recognises the headset as a "Stereo" headset. The headset has a Sound Card of it's own and uses the drivers that come with the Installation CD for Surround settings that are mad in Audio Control Panel or Creative Entertainment Console.
This is a problem.
For example. Playing Call of Duty 5: World at War.
The audio settings on this game, always (and is unchangeable) goes after the default Audio Device. And then it recognises my Headset. And puts in STEREO config. Since it was W7 recognises, and I cant change that on the game and neither on the Audio Settings on the computer. Which make the subwoffer and Surround effects useless which is a hard bummer, since it's such an awesome headset and is totally awesome when i play Battlefield: Bad Company 2.
I really want to know how I can fix this! Please help me. Any settings or special config in the cfg files you can do on Call of Duty 5 or and settings or stuff I can do to change so W7 recognises my headset with the 7.!

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

How does one enable Stereo Mix on the Sound Blaster Arena Surround USB Gaming Headset

I'm usually streaming games and I picked up this headset to replace my old gear.
I've noticed in 32-bit XP Pro I do not have the option to enable stereo mix which was how i was able to stream game audio and commentary on.
Does a work around exist to enable stereo mix or to otherwise transmit audio from both the input and playback sources?
BTW I've also posted this on the Livestream forums to see if I can get a bite.

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

No left audio. No serial. Sound Blaster Arena Surround usb Gaming Headset.

I have a Sound Blaster Arena Surround usb Gaming Headset and the left speaker no longer works.
I have tried the headset on multiple computers ranging from xp to vista to 7. some have different versions of the driver. On all the left audio is silent.
I would like to redeem my warranty because I bought the product on 08/04/10
But I no longer have the box or booklet that came with it and therefore can’t get the serial number for the device.
Is there anything you guys can do to help me?
The closest article I could find to this problem was here http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-problem/m-p/558966#M2001. So it appears I must wait for an admin to help.

Thanks!
Very handy info.
I went to http://rma.creativelabs.com/OnlineRMA/EnterProduct and that section required I have a legit serial number.
Thanks!

Sound Blaster Arena Surround USB Gaming Headset broken

6Sound Blaster Arena Surround USB Gaming Headset broken?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#t384326">Original post on tom's hardware[/url]
Hello,?
My cat jumped off my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">computer[/url]?desk while I was wearing my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">headphones[/url]. The result was the wires separating from the USB end. They are quite distinguishable and not impossible to solder. However knowing which wire corresponds to which solder point is beyond me. I contacted Creative. They will not help me. If anyone has a Sound Blaster Arena Surround USB Gaming Headset and would be willing to open up the plastic housing on the USB end to tell me what goes where I would greatly appreciate it. Also the plastic housing will go back together. If any additional info is necessary, please inquire.
[img"]http://img76.imageshack.us/img76/3769/arenaheadsetwiringdiagr.png" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img685.imageshack.us/img685/876/p000896y.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img846.imageshack.us/img846/869/p000899.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img860.imageshack.us/img860/4259/p000898.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Creative Sound Blaster 5.1 Windows 7 Driver Please!!!!

i recently upgraded my pc from vista to windows 7....the driver cd for creative sound blaster 5. which worked for vista is not working for windows 7...can anyone please ppost me the link to download the driver for windows 7 or atlease tell me how to rectify this problem....its very urgent...i have no sound in my pc....please help!!!!

hi <span class="lia-user-name UserName">sachinsankar555
<span class="lia-user-name UserName">if you have 32-bit version you can resolve your issue so easly
<span class="lia-user-name UserName">just make your driver cd?compatible with windows xp, i?trieded this and it worked with 32-bit
<span class="lia-user-name UserName">but now i am having 64-bit and it wont recognaize it at all

Multiple cases in which the Sound Blaster Arena USB Headset breaks. . .

I bought the Complexity edition of the Sound Blaster Arena Surround USB Gaming Headset. After using it for months the USB connector part of the headset breaks and falls apart. Feedback from here shows that this has happened to many other people (http://www.newegg.com/Product/Produc...82E16826158084).
I want to know if can get this repaired as this is a defect. When i tried submitting an RMA it says that the serial isnt recognized but when i registered my product it works.

Hello Bunbotman990,
Please get in touch with customer support here if you have problems with the online RMA. I'm not sure but for issues like this, they may have to ask you to send in a pic of the defective part.

My Past, Present & Future with Creative Sound Blaster cards

I wrote a small product review of a Z-series card i regrettably purchased and creative responded. I replied to them and copied+pasted it here. First and foremost please understand this is just an open letter talking about my love for and mostly positive experiences with the Sound Blaster line of cards since the mid-late 1990s.
Attached is an annotated picture of almost all the Creative hardware I've bought over the years.
Take a good long look at that picture. Think about how many songs have been played through those devices, think of how many movies have been heard through those devices, think of how many games made me jump out of my seat from sound effects heard through those devices, and lastly think how many thousands of hours this amounts to.
STOP READING and LOOK at that attached PICTURE.
I use the word 'almost' because it does not include the card I recently purchased off e-bay, which was listed as (and was) mint condition new, and cost me $250.... a Sound Blaster X-Fi Titanium Fatal1ty Champion Series card.
If the direction Creative is going to continue to go is the direction that it's been going over the past handful of years this will be the last Creative product myself or anyone i influence or make purchasing decisions for will ever buy. Being in my mid 30s I'd say you'll miss out on at least another 20-30+ years of future product purchases.
Below is my address of your reply to my review of your product in a piece by piece layout:
"Based on user feedback we've done the following:
- Take up less disk space"
I run two 128GB SSDs in a hardware based (LSI Logic 8704ELP) raid-0 array so the disk footprint of drivers and software is important to me but whatever space you reduced your driver to is trivial.
%ProgramFiles(x86)%\Creative\(ALchemy, AudioCS AutoMode Switcher, Console Launcher, Shared Files, ShareDLL,THX Console, Volume Panel)
in total take up about 100MB of space. reducing this means NOTHING because it does not allow for more hefty software (Games or Design/Drafting/3D-Modelling Software) to be installed. Now if say your driver and software had a 1GB footprint and you reduced it to 500MB that would be significant because 500MB is enough space to account for one or 2 of average installation footprints of the products in the Adobe Creative Suite. Reducing the size from 100MB to 25MB/50MB/75MB is moot.
"- Optimized controls for touch screens"
This point is amusing, why? because you are making the same mistake Microsoft made with Windows 8 & Metro. Most people who buy a creative sound card are putting it in a PC and do not have a touchscreen. I don't manage a lot of computers but the ~200 i am responsible for bypassed Windows 8 (maybe even Windows 9, we'll see) and either moved from Windows XP to Windows 7 or they will be staying with Windows 7 for the foreseeable future. The touch centric design of Windows 8 is a significant part of this decision despite all the things Microsoft did that i think are steps forward (like better native support for multiple display devices to name one example).
"- Streamlined the interface so it's easier to navigate (removed "modes" and have all controls available regardless what you want to use the card for)."
Dumbing-down a product to reach a greater audience is walking the fine line of Quality vs. Quantity. Why you've sacrificed significant Quality to increase Quantity i do not know. While I will agree making 1 interface instead of 3 can be a potential step forward you did more than streamlining the user interface- you removed prominent, useful, and important features.
"- Better tie in with the Windows audio sub-system."
Through out the decade the only problems I experienced with Windows and my Creative products i can count on one hand. The first would be when Microsoft abandoned DirectSound and moved to an UAA based audio stack in Vista forward and your company dropped the ball and Daniel_K picked it up and made working drivers for your products and you went after him... I was one of the people who used his working drivers to make your sound card work properly when you failed to do so. Second was the fact that you people charged for ALchemy when the move to Vista occurred... this was truly a sh*ty thing to do. The third was the X-RAM causing a BSOD (STOP 0x50 - PAGE_FAULT_IN_NONPAGED_AREA) in windows on a regular random basis because of your device drivers and the best working solution was to disable using the X-RAM on the card- a selling point of the cards to begin with (albeit in years prior).
Allow me to elaborate some more while I have time since it's sunday night and the family is busy with other things and will be off to bed thereafter.
Creative's device drivers and software has always been a point of contention. You don't make the install discs available for download on your website for starters. This is a fascist move on your part. Your driver installation procedure and reliability is hit or miss. I personally have not had a lot of trouble with the drivers (only a few hiccups here and there) but i have read on the forums where all sorts of other people have (I'm not in disagreeing that their problems are partially their fault, but that's the price of running Windows instead of buying a Mac). My experience with your driver software suites over the years have been mostly (A) "When it works as expected it's sheer aural bliss beyond that of any other sound card in existence! THIS is why 'Sound Blaster Compatible' was what other companies put on their products, because Creative set the standard for everyone else to meet." but also sometimes (B) "everything installed and worked fine but now something is corrupt and not all the speakers have sound coming from them or the sound is all screwed up and the driver won't uninstall/reinstall/update correctly because it's corrupt and it's not deleting the driver files because windows has the files locked and safe mode isn't helping so now i have to physically remove the card from the PC and try to completely clean out my system of the Creative software. I can't believe they went after Daniel_K the way they did, i wish he'd come back and fix their drivers. Now which box did i put that install cd in...."
There are 2 reasons I've bought Creative sound cards for over a decade now. CMSS 3D when listening to music while working throughout the day and EAX in videogames at night.
I remember the moment when I experienced EAX for the very first time. I was in college and over at a friend's place. He had just got a new game called Thief: The Dark Project. I remember him telling me about something new called EAX and that only Creative cards had it and that it was supposed to be awesome. About an hour later after watching and HEARING him play Thief I was hooked. Creative had secured a place for it's hardware in my budget for every PC i built from that day forward.
Being that I've worked from home for about a decade now I will listen to music while I work and get in an hour or so of gaming at night as time allows. Straight off the bat the first time i ticked that box for CMSS 3D long long ago and heard music coming from every speaker in my home office i was amazed and overwhelmed. Then when you introduced the ability to set the individual speaker distance and volume from the listening position it was the icing on the cake. I was surround by sound. It was SHEER AURAL BLISS. This feature called CMSS 3D would become the second reason I purchased and recommended Creative sound cards for the decade to come.
As i stated in my review, the only reason i bought a new sound card was because the motherboard I was purchasing had no PCI slots (I remember when motherboards stopped having ISA slots as well...). Before making my purchase I read. I read a lot. I read about the changes you made with the X-Fi Titanium HD and then the Recon3D, and the more i read the more a feeling of apprehension began to take hold. Then i got to reading about the Z-series and read about some of the positive changes between it and the Recon3D line of cards and I became a bit more hopeful.
Sadly my apprehension was spot on... Listening to music was a worse experience when compared to my X-Fi Platinum (or even my old Audigy 2)... and did not even come close to justifying the purchase of the card compared to just using the integrated sound capabilities of my motherboard, an ASRock Z87 OC Formula/ac. But none the less I still had EAX to fall back on right? wrong... I installed a couple games, some new and some old, some with EAX and some without, and for about 2 weeks i played a bit of each one to see how the card handled new and old games. Sadly EAX compatibility didn't even matter because it was overshadowed by poor directional audio reproduction... that same front center speaker that was overbearing when listening to music was noticeable when gaming to the point that it was negatively affecting my gaming experience. I tweaked and toggled every setting i could and even uninstalled and reinstalled the drivers and software to try to mitigate this but to my dismay i could not. It was at this point I went weighing my options... and looking for an X-Fi Titanium (NON-HD!) and suffered the capitalist price gouging that occurs in such supply & demand situations... at least i talked the guy down from his original asking price of $300. I bit the bullet on this because chances are this is going to be the last Creative card i ever own...
I've had my Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series installed for just over a week now. Everything sounds precise and as it should when you have a quality piece of hardware paired with quality software. Directional audio in games comes from all speakers appropriately and not excessively from the front center speaker unless it's supposed to. Ambient music floats through the air all through out the day creating that familiar feeling of sheer aural bliss as it did before. The only downside is I'm getting to experience the problems other people have with this card (strange loud static-like warble EMI type noise coming from speakers, unaffected by windows volume control) but I have found a work around that I'm using on the rare occasion this happens (disable the device in device manager, re-enable device in device manager).
Chances are what i've written above is perhaps an opening soliloquy of the requiem for the Creative Sound Blaster, the card that defined an industry and the company that turned it's back on it. I don't expect anything to come from this letter and I don't expect a meaningful reply from you. You'll probably write me justifying your decisions you've made with your product line and offer some false sincerity about how you are happy i am enjoying my price-gouged discontinued soundcard i had to buy off e-bay because your current line of products are not a step back in your eyes because of the profits they turn. This generation of customers who buy your Platinum HD, or Reco3D or Z-series line of cards probably oblivious to what they are missing out on (through no fault of their own), funny how the bliss of ignorance works and lines your pockets...
It saddens me that i had to buy a discontinued product off e-bay because it's a better product than what your company currently offers. I wish this wasn't the way things turned out. When you dropped the fun presets and finite control of the EAX effects during the transition from the Audigy to the X-Fi line of cards I noticed but since they were not the main reason I owned a Creative card I tolerated it. But now you've gone and ruined the features that were the reasons i bought Creative cards, and this I will not oblige.
My Creative Hardware.jpg

@To the OP:
I own a X-Fi Elite Pro for the past 8 years now.
Since there, this card has faithfullly seen me through 3 major PC upgrades.
I'm currently at a point where, very sadly, much of what you've described is also weighing on my decision to not go for a Z line.
@Creative:
I do hope you're listening and can come up with a solution to a simply design feature - namely a fully working Stereo Surround, like the one that was available in the X-Fi line of cards via CMSS-3D.
Regards,

Creative Sound Blaster Arena Headset HS-1100 Windows 7 Volume Too Loud

Similar Messages

Maybe you are looking for