Creative Sound Blaster Audigy 2 ZS Platinum Sound Card H

I have been using this card for over year now and its a great card. I have all the latest updates for it. But for some reason when i turn on or restart my computer the Creative Volume Control Icon does not come on in the task tray when the computer boots up. It is set in the start up list and in the Surround Mixer settings.
Can some one please help me on this?
Thanks
cookiemonster

cookiemonster,
Open the surround mixer program and click at the down triangle that's just next to the "?" at the top right hand corner. There's some options there for you to display the volume icon.
Jason

Similar Messages

Sound Blaster Audigy 2 ZS Platinum Pro Prob

Recently I've purchased the Creative Power Pack Pro 7., it included the <SPAN class=textbluebold>Creative GigaWorks 7. S750
<SPAN class=textbluebold>speakers, and <SPAN class=textbluebold>Sound Blaster Audigy 2 ZS Platinum Pro soundcard. I've installed my Sound Blaster Audigy 2 ZS Platinum Pro card and setup my Sound Blaster GigaWorks S750 speakers but so far after many attempts haven't gotten them to work. I've tried all updates off the Creative site and gone through the cards settings. For some reason in the speaker settings it only lists Headphones, 2., 4. and 5. speaker settings, leaving out 7.. I've checked all plugins and hookups, and am stuck for now. I have a brand new Sony Vaio computer, so i know that my computer is not the problem. I read through all the forms and I was only able to find one other question like mine, one person answered saying that the <SPAN class=textbluebold>Sound Blaster Audigy 2 ZS Platinum Pro is not compatible with 7. speakers. I have no clue why Creative would sell the Audigy 2 ZS Platinum Pro and GigaWorks S750 7. speakers if they are not compatible with each other. Someone please help me. Thanks.

Hi Joko,
Please check your private message.

Creative Sound Blaster Audigy 2 zs Platinum - Smash Party Toda

I have recently spent over $0 thousand dollars on upgrading every computer in my building to Quadcore 64bit vista systems. The only component that remained the same were the Sound Blaster Audigy 2 zs Platinum dri'ves that every system has. I have been up for 2 days trying to figure out why the external dri've will not work at all, for any system. Everyone in the office is giving me grief over the new stuff because of thing, nobody can get their mics to work, or anything on the external dri've to function.
After reading up on the Dan.k story, and creatives deliberate attempts to be as difficult as possible, even to the point of charging me AGAIN, to make a product work (alchemy), I have decided later today were having a little get together at lunch where I will be instructing my employees to remove their sound cards, and smash them. Hey, I can afford it. Its the principle of the matter that bothers me. I used a valid email obviously to get on this forum. Shoot me an email if you don't believe it creative, and ill send you pictures when we're finished.
I have used ONLY creative products for sound since the 90s. I have at home, a closet full of creative products that I have personally upgraded from over the years. I have been a loyal customer for over a decade. Thankfully I found the dan. K story before I finished finding out weather or not the newest creative products work with vista, because Ive had my Credit Card out for 0 hours now just trying to find the right buy. Creative, you lost it big time.
Mike Wilson.
Message Edited by Revolt on 05-2-2008 08:38 AM

As an IT manager, I'd be more inclined to find out who made the decision to implement this change. Then find all the people who were responsible for deploying all of these systems out to users without testing to insure that they worked. All of these people are responsible for countless numbers of resource hours by introducing a non-tested system into your company's user community. Then, I'd introduce them all to the ever increasing base of the unemployed. The $0K hardware investment that you claim to have made is only the beginning, the overall cost of lost human resource hours will prove to be far more significant.

Sound blaster audigy 2 zs platinum sound probl

Ok So let me give you the specs on my computer first,?Windows xp home editionAbit IN9 32 MAX Mobo2 Gigs corsair xms ram2 8800ultra sli gpusLogitech?z-5300 SpeakersSound blaster audigy 2 zs platinum sound card2 Samsung 500 gig HD?I dont believe that my problem is the same as is in the crackling sound thread. So here is my dilema. Up untill about 4 days ago everything was working fine with my sound system. I have the Logitech speakershooked up to my audigy 2 zs along with my xbox 360 in the optical in on the front plate. So like i said about 4 days ago i started playing a movie on my computer and i have the ac3 codec installed on my computer with comunity codec pack and i know that you could say that those 2 things could be my problem i know enough to know that that probably isnt. So when i played the movie and when to the ac3 codec and turned on dolby decoding so that i would decode it to all my speakers everything worked fine. Then when i turned on spdif decoding my center speaker?started to crackle so i figured it was just becuase i was useing spdif and dolby decoding at the same time. so i turned that off and then went to go play my xbox 360 in which i have pluged into the optical in part on the front plate. Everything had always worked fine for that i have dolby digital decodeing on for the audigy. So i started to play a game i realized that i center speaker was crackling on there too. So i started to realize that no matter what i did the center speaker was crackling. I even changed out the center and sub stereo jack on the card for the front left and right and then they started to crackle in that spot. So i dont know what the hell is going on. Any help would be greatly appreciated i was thinking of restoring my computer but i dont know whether that is necessary. I also dont want to have to go out and by the x-fi elite pro tomarrow unless I absolutely have to.Message Edited by TasteOfChaos on 0-0-20080:02 PM

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Sound Blaster Audigy 2 ZS Platinum with Vista 64

0Sound Blaster Audigy 2 ZS Platinum with Vista 64Y Hi
I'm considering buying a Sound Blaster Audigy 2 ZS Platinum (with front panel) off ebay, but first I'd like to know if certain features will be compatible with my system. I'm running Vista Home Basic 64bit (hardware is an Asus P5Q-E, Q6600, 2GB of RAM, ATI Radeon HD4850, etc). I'll be using this card for my PC's 5. surround sound system (using the stereo outputs), and more importantly, recording some music. I want to achieve this by using the optical S/PDIF port, as my bass guitar effects board has an S/PDIF output and I've got an S/PDIF cable. I'd also like to use the Line In and Mic inputs. The driver before the latest one for this card said that there was no S/PDIF passthrough for Vista. Has the latest driver got everything I need fixed, so I can just plug it in, install the drivers and then be happily recording through these three inputs?
Thanks for the help?
Message Edited by SuperMaximo on 05-22-2009 2:4 [email protected]

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

I'm considering converting my laserdisc collection over to DVD.
As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
The laserdisc player has the following:
AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

Alright, let me just double check...
As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
Message Edited by madmax66 on -6-2004 02:40 AM

Mic2 front panel of sound blaster audigy 2 zs platinum still not worki

anyone..... please help!!!
I have a sound blaster audigy 2 zs platinum, everything is hooked up perfectly including all power cable, and connectors to the front dri've bay. I have a samson q7 microphone that is connected using xlr female to /4" plug to the mic2 jack but I got no input signal. I then tried also using just a /4" to /8" to the back mic port of the PCI, no signal either. My friend said this mic doesn't need any other power like a phantom power or anything
can you please help me!
X

If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

People with creative sound card post here.

There had been some report's people with creative sound card has problems on nvidia chipsets or neo motherboards. I just want to know how many has problems and how many don't.
So, people who has problems type 1 at beginning of your post and type 2 if don't have problems then post your spec's
Cpu
Operating System
Motherboard/bios and cell menu settings
Ram/timing
Soundcard/drivers
Videocard/drivers
Powersupply/Amps +3.3v,+5v,12v
========================================================
Amd64 3000+ 9nm
WindowsXP sp1
Neo2 platinum/1.4/htt x4,nvidia/ati speed up disable,cool n quite enable
Ocz 3200 platinum rev2 (2x512)/ 2.2.2.5
Soundblaster Audigy2/ 1.84.50
Tyan 9700pro/4.12
Enermax EG465-ve 431w/+3.3v-38a,+5v-44a,12v-20a

I thought I'd share my most recent visitation of the digital poltergeist that is the Audigy 2 SB024x.
I was looking around my WinXP system panel and noticed that some program had changed the PERFORMANCE->ADVANCED->MEMORY USAGE from PROGRAMS (default) to SYSTEM CACHE.
Keep in mind as I detail this to you that this build is only a week old, and I've installed very few programs on it, drivers and test utilities mostly...
Anyway, I change the setting back to the default value (PROGRAMS) and hit OKAY. That very instant, the machine reported detecting new hardware, an Audigy! Given that I already had an A2 installed and mostly functional, this came as quite a revelation.
I checked the Device Manager, and sure enough, there it was. An Audigy was indicated as having been installed in the place of the newer model.
I reboot the computer, and when I revisit the Device Manager, the Audigy2 is back, BUT there is a problem (ROLMAO), the card's firewire adapter is all of the sudden marked as broken, so I uninstall it and reboot.
The machine goes through its startup, and I check the firewire and its okay, NOW, in Device Manager. Good, me thinks.
Then I go back and run 3DMark03, looking for my error message: FMOD error in FSOUND_SetPaused: Not enough memory
The benchmark completes without incident three times and the problem is solved. No more messing with my memory timings or sound accelartion. Hurrah!
In closing, I want to apologize to anyone whose patience that I may have tested with this mini-testament.
I have no idea why this series of cards http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=290217 is so difficult to configure for the K8N, but its really kind of a nightmare, IMO, and MSI really needs to take a look at it.
Please guys, there is a problem here, so would you please check it out for us.
Thanks,
Moe

A problem with ALL creative sound cards i am hav

All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
Specs are:
p4. 3.0
DFI Lanparty 875 rev. B
gig corsair pc4000 dual channel
2x raptor raid 0
SB Audigy 2 ZS Platinum Pro
ATI Radeon x800pro
Headphones i use are bose acoustic 2 headphones
Speakers are logitech x-530
If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
[edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AM

figured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.

Creative sound cards and iTunes static

Okay, after having looked through the messages here it looks like everyone who has said they are having a problem with the static/audio distortion (unless the volume slider is set to 100%) are using Creative sound cards.
It looks like a number of us are even using the latest drivers and that doesn't seem to help.
Just to get an idea -- is anyone having this problem and NOT running a Creative sound card?

I have an Audigy 2 ZS Notebook, and it was doing the static/distortion thing after I upgraded. What I did to fix it was to set QuickTime to output sound as 16-bit instead of 24-bit. It's really funny because the soundcard is set to 24-bit mode...

Driver for Creative Sound Card Model no: SB0

Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx

samram wrote:
Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
SB0680 : Creative Sound Blaster 5.
http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
Maybe you can install these drivers/software.
jutapa

Duriong Voice Chat Voice is not Receiving from Creative Sound Card but going correct

Hi!
I have recently faced a problem in my Creative Sounce Card. When i play a sound, no? sound is coming from sound card, No?error message is coming but monitor screen is displaying the sound animations in?Windows media player. I have also tested my speakers & connections and no problem found in it. I also changed the Creative Sound Card Software's settings to default but all in vain. Besides when i?unchecked?the check box ("Only Show Digital Sound") in the Creative Sound Card Software, the analog music is being received, but it is only music without any human voice. The same problem is during voice chat.
Plz help me in this regard.
Thanks in advance.

There is no confusion (anymore) I'm just trying to get the word out that nobody wants to supprt these OEM cards. Not you and not Dell. Does Dell even have the rights to redistibute the apps to work with there versions of your cards? Card works, Drivers Work, No ap
ps.
.see my delima? Just a heads up to anyone else with this problem. I've looked to no avail for a updated set of apps for this OEM card. Really kinda anoyed by this. I mean why can't creative support there own card. I know dell bought it, but it is creative and you made money from it support it. Seems pretty cut and dried to me. Digrunteld Axe

Programmatic Control of X-FI ??? // Two Creative Sound Cards on Same PC ???

The pc about below is currently running WinXP, but I plan to replace it with a Vista based machine in early?200.
1] Can someone please point me in the right directions? I would like to use something like an API or some other interface method to control the volume level of the X-FI usb device. Hopefully to be able to control the volume of?each of the 5 channels independently as well as the master volume. In other words,?have a dotNET program (or VB script, etc etc) that will interface with the X-FI via something running on the same pc. I would prefer it to interface with one of the SoundBlaster or Creative softwares so as to not reinvent any wheels, but that is an option. The simpler the better. I don't need anything fancy and probably just the controlling the volume?levels will work fine.
Alternately, it might be possible to control the X-FI with an IR remote, but I am not aware of IR functionality in? the X-FI.
2] I am also wondering: How do I run two different Creative sound cards on the same pc without issues? The rational for this is that I want to improve the sound quality of our home theater pc to 7. Creative quality level, but I need the X-FI to control audio for the home automation software that runs on the same pc. The home automation software generates Text To Speech audio which does not need to flow through the high quality Creative sound card. I was hoping to use the X-FI in a simple mode to route the TTS speech audio out to 4 or 5 sets of speakers as monaural voice. During different occupancy times and night time, its very useful to lower the volume level (especially upstairs when sleeping).
I have a hunch the X-FI would be a truly awesome device to use for this purpose. There are many other people who would like to do this same thing. It would be nice to have a device like the X-FI that is widely available.
Thanks much for any and all help. Sorry if this is so 'newbie', but I just don;t know how to start.
STEVE

HellknightFA wrote:
Perhaps Creative Labs as manufacturer of the pehaps widest? spread soundcards on our market can work with Blizzard together to solve this problem.
Nice idea but keep on dreaming
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=74283&vie w=by_date_ascending&page=
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=7962
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5882
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=77697
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=32566
Unfortunately CL don't really care, they just blame it on nVidia and dismiss it.

Kx-project driver for creative sound card to 2k3 as a workstat

Hi Everybody
maybe it also if you run as it is build to as a server i don`t no but i have use it since Februar this year with no problems at all ! here is the link :
http://kxproject.lugosoft.com/index.php?skip=
and here is the full list with all supported creative sound card and maybe other sound card to who no?s and the FAQ !
http://kxproject.lugosoft.com/faq.php?language=en#cards
Best regards
audiogy2newbieMessage Edited by audiogy2newbie on 06-2-2005 2:6 PM

Information is scarce for end of service life products, you might want to read about the specs here. Alternatively you might want to consider this model instead but you may need to do some searching since it's not available in the UK online store.

Creative Sound Blaster Audigy 2 ZS Platinum Sound Card H

Similar Messages

Maybe you are looking for