Creative Soundblaster Audigy 2 Zs help

Before I start rambling on about my problem here are my specs (BTW I'm not incredibly computer literate; my dad helped me install everything before I left for school):Cpu: Intel Duo Processor 2.66 GhzRAM: .5 GB DDR2Video Card: ATI Radeon 9600 (soon to be one of their newer models)OS: Windows XPSound Card: Creative Soundblaster Audigy 2 ZS?Ok so I was reinstalling everything after I had to format my computer. I get through installing my creative sound card and figure everything went great. I was playing my music when I had realized that I forgot to configure my sound card for them, as I was getting mono instead of stereo (was only playing out of left speakers). So I go into speaker setup and click on "calibrate speakers" or something like that. Anyway, the speaker calibrator says that It could not be ran for some reason (i forget). I figure that it wasn't working because I hadn't updated anything yet. I update, and I still get the same message. So I reinstalled the software and updated it again and now when I try to run ANY of my creative software related to the sound card (I.E. EAX console, Speaker Setup) it says that "The Audio device supported by this software is not detected. The Application will now shut down."? Now remember that I'm not great with computers, so my solution now will probably sound stupid. But anyways I figured that I had installed the wrong sound card software (it gives me three choices on the disc). I uninstall everything and choose another setting. I still got the same problem. So I try the third choice and I get the same problem. Any suggestions? I've tried all three choices and I still get the same problem.

tony8gj wrote:
I have the SoundBlaster Audigy 2 ZS sound card installed in my Dell 8400 PC. Does anyone know what the latest SoundBlaster Audigy 2 ZS driver version is? I currently have driver v 5.2.4.445 and date 8.7.04 I've tried to install this from the Creative site: SBA2_PCWDRV_LB__84_55-R.exe but keep getting a "setup could not detect and sound blaster audigy 2 on your system" error. The driver on the Dell site is: Creative Labs SoundBlaster Audigy 2 ZS: R92022.exe Thanks! Tony.
Hi
You may first need to patch the driver package by using ctcomp.exe to get std. drivers (eg. not Dell specific) installed to your Dell PC. Search this forum after ctcomp.exe --> there you'll find some instructions too.
You can also find a link to the latest drivers available (I personally use Audigy 4 drivers from november 2005 --> can be found from creative support pages) by searching this forum (I think the latest WHQL version is .~62 for the original version).
jutapa

Similar Messages

Creative SoundBlaster Audigy Advanced MB software activation probl

Hello!?I bought?a software named Creative SoundBlaster Audigy Advanced MB, when I ordered my notebook Inspiron 720 from DELL, on the 8th? of September, 2007. They provided a CD for the software, which I installed, and it worked. But then later that day (when I recieved the laptop), I formatted the hard-disk for the following reasons - ) It only had 2 partitions for the entire dri've, one of which was a recovery partition, and I wanted to create more.2) I wanted to remove MediaDirect.3) I wanted to remove bloatware that DELL gave me with it, ie, DELL Quickset, DELL Support, DELL this, DELL that, Norton AntiVirus etc.4) I wanted Vista installed by my way. After I had done everything I wanted, I started to re-install the Creative software, the same way like I did before. But this time, when it took me to the transaction page and asked me for the reason of re-installing this software, it said "The CD Key has expired."?I have tried 2 different browsers,?I have cleared my cache, I have penta-checked my CD-Key before each install and have done anything a Computer Software engineer (me) would do, with the help of the Internet as well. But my every effort went in vain. Then, I did something I didn't want to do, I contact DELL technical support. Their solutions ranged from installing the latest drivers (yes, drivers for a software), to removing and re-installing the latest Internet Explorer (yes, they asked me to REMOVE IE) to put the HARDWARE in some other machine. Quite clearly, the 4 support executi'ves I talked to there at DELL had no clue as to what is going on and what is the problem. Then, after a 2 hours chat with another one of them, I was told that they just provide the software, and it is Creative's duty to handle everything later and asked me to talk to you. The email support page do not have the option of support for this software, so I selected some other product but sent my problem.
It would be very nice to know if there exists a solution to this problem, and how should I approach it. It has only been 20 days since I bought this software. Thank you!

Finally, I got a reply from the email team, and they sought some further information, which I duly provided. Then, they provided me with a new CD Key. But here is the thing, they say after 3 times of re-installing the software, I will have to pay for it. What?Why would I pay for something which I bought, again and again? The whole world knows about Windows Vista, how incompatible it is with more than 80% of the software, and it will be the same till SP is released. I have since this Sunday gone have re-installed vista 4 times, once due to the fact that AHCI in the BIOS was not enabled by default, and I had to re-do the installation, then it was SATA drivers not presentonthe Vists disk, then the nVidia drivers had problem with Vista and it crippled it and won't go and then the Windows Media Player , quite clearly still not fully functionable, made my system bust. And I can say that it will happen again, so why do I have to pay some part of the software's price again? I am not using it on any other machine, and that is checked by it's CRC checker anyways, I am not using it for any business project, which shouldn't be a problem even if I did, as I own it. If any of you guys have an answer to this, please let me know.
Thank you, and have a very nice day all!

Creative Zen Plus & Creative Soundblaster Audigy 4. Can the two be linked in any w

Hello and good morning. I've an extensi've collection of music consisting of 35,000 tracks which I play through my Creative Soundblaster Audigy 4 via my hi fi system. In order to access these tracks when using the Creative Zen Plus, I notice it calls up only the file name which is a time consuming effort to get tracks transferred. To your knowledge,is there a way to use the Creative Soundblaster to 'drag and drop' individual tracks straight into the Creative Zen using the 'burn now' facility?
Any help and assistance would be highly appreciated. Thank you very much indeed for your help.
Alan L.

Didn't your soundcard come with MediaSource? If so, you can transfer the tracks that have already been converted to MP3 or WMV format directly to your player. MediaSource also displays the content by ID3 Tag titles once they've been entered into the Music Library.

Creative Soundblaster Audigy SB0570

Hi friends, start by apologizing for possible misspellings. Creative Soundblaster Audigy I have problems with SB0570. Since I bought this motherboard sound I had only 4 speakers sound without subwoofer and center. When I give test everything works properly. Maybe not something I set myself right in "Creative Audio Control Panel" or Winamp, I run Windows 7 and the latest drivers audio system Genius SW-5.1 3000 5.1 What should I do to work all satellites including subwoofer. I am attaching some photos with my settings. My hardware:
AMD Athlon II X3 455, 3300 MHz
ASRock 880G Pro3
1 x 4 GB DDR3 1333 Team Elite 1333
Western Digital 500GB SATA-III 7200rpm 16MB Caviar Blue KX
SAPPHIRE Radeon HD 6850 1GB GDDR5
Attached Images
1.JPG
(32.6 KB, 4 views)
2.JPG
(38.9 KB, 3 views)
3.JPG
(34.5 KB, 5 views)
4.JPG
(37.1 KB, 2 views)
5.JPG
(35.6 KB, 2 views)

Part. 2
Attached Images
6.JPG
(42.3 KB, 4 views)
7.JPG
(34.4 KB, 4 views)
8.JPG
(33.3 KB, 3 views)
Capture1.JPG
(40.0 KB, 3 views)
Capture.JPG
(45.5 KB, 3 views)

Can not install driver for Creative Soundblaster Audigy 2

Hello
I excuse myself for my unworthy english.
I disabled motherboard audio in Bios before installation and before putting soundcard in
It says that i can not find any soundcard
but when i search for audio? drivers in thedevice manager(correct word for it's)
it copies some files and audio works
the sound card is listed in dxdiag but in games i have bad performance
My system:
Windows XP Professional(directly after installing windows i installed SP2 then SP3)
Direct X 9.0c
Intel Pentium 4? 3 Gh
Gigabyte GA-8G000MK
2 GB DDR ram
?Nvidia 6200 256 MB
Soundblaster Audigy 2 ZS
My system is completely new.
Directly after installing windows(on formated partition)
i installed SP2 then SP3
then i installed Motherboard drivers
then i installed graphic drivers
then i installed antivirus drivers
then i installed wireless lan drivers
then i tried to install audigy 2 ZS drivers.i tried from CD and newest.Both didnt work
i disabled antivirus before installation attempt
i would be happy about help
Only one cable is used from CD-rom to soundcard:? CD-in
no other cable..buti was able to install long ago
Message Edited by ignaz on 08-2-2008 09:27 AMMessage Edited by ignaz on 08-2-2008 0:36 AM

Your welcome try my pax drivers that might slove your issue

Creative SoundBlaster Audigy SBO160 Driv

Hello
I need to install drivers to my soundcard (SoundBlaster Audigy SBO60) I cant find my model in the "AutoUpdate" - section. And I dont know where else I can get the drivers if not here, so I need a link to the drivers I need... So could someone please help me?

I just checked mine (still using it in my second computer) and it is actually a SB062, which is a later version of the same card. Anyway if you don't have it already grab Everest Home Edition,?http://www.majorgeeks.com/EVEREST_Free_Edition_d48.html?Once you have it installe go to the following,?[img"]http://i0.photobucket.com/albums/a7/stormy352/everest.jpg">?and copy and paste the hardware ID for your card back here and i will check the inf for it.

Help! How to install/update my Creative SoundBlaster Audigy 2 Model SB0

Hi there,
Sorry if this question is nai've, as I am new to this PC stuff
I got an old Dell Dimension XPS (2003; 3GHz) (no driver CD)
I hear no sound after connecting to a pair of cheap Antec Lansing speaker with cable
My XP sees the driver as Creative Audigy Audio Processor (WDM)
My Driver software see it with Creative Sound Blaster X-Fi Audio Driver
I opened the box, and see it as a Sound Blaster Audigy 2 Model SB 0240
Where do I get the SB driver in order to install correctly?
I tried to download the driver Audigy 2 Value at the website:
http://us.creative.com/support/downloads/download2.asp?MainCategory=&Product=0653&dlcentric =9497&Product_Name=Audigy+2+Value&filetype=&OSName =Windows+XP
But after installing the driver, there still has no sound.
Can you please help?
Many thanks

sj67 wrote:
Hi there,
Sorry if this question is nai've, as I am new to this PC stuff
I got an old Dell Dimension XPS (2003; 3GHz) (no driver CD)
I hear no sound after connecting to a pair of cheap Antec Lansing speaker with cable
My XP sees the driver as Creative Audigy Audio Processor (WDM)
My Driver software see it with Creative Sound Blaster X-Fi Audio Driver
I opened the box, and see it as a Sound Blaster Audigy 2 Model SB 0240
Where do I get the SB driver in order to install correctly?
I tried to download the driver Audigy 2 Value at the website:
http://us.creative.com/support/downloads/download2.asp?MainCategory=&Product=0653&dlcentric =9497&Product_Name=Audigy+2+Value&filetype=&OSName =Windows+XP
But after installing the driver, there still has no sound.
Can you please help?
Many thanks
?Your card is not "udigy 2 Value"? but "Audigy 2 Platinum" series card. So if you try install drivers go from CT support then select Audigy 2 Platinum there. IIRC, there are/were some problems to install original drivers for OEM cards ... resolution was/is to go to the vendors (dell in this case) support pages and install?drivers from there if you find ones. You may also try to install?HP OEM driver or patched Audigy installation. You can find both by searching here. jutapa?

Creative soundblaster audigy

how come this sound card is never mentioned anywhere on the soundblaster website?
i cant find a driver which i manually download for it. the only driver i can find on the official webpage for it is the automatic update which works for all creative sound cards

Did you honestly search the Support section? There are more than 4 Audigy LS models, under the Sound Blaster> Audigy section.
If you are looking for the product page, I think the Audigy LS was renamed to Li've! 24-bit for most regions. At least the chip is the same, perhaps its a newer card model.

Creative soundblaster audigy se prob

Hi im new to this community, i feel sorry if im doint something wrong now, but im despered at the momeny because im messed with this soundcard and my 5. music system for 3 days now.. the problem is that subwoofer works, center works, front works very poor...scratchy noise etc...rear are dead...what can i do??i would be very happy if anyone knows the solution

noone could help`?

KT4 MS-6590 1.4 BIOS and creative soundblaster

I updated the BIOS of the MSI 6590 motherboard from 1.3 version to 1.4 version. This adds the "CPU Halt Command Detection" item in BIOS Setup. I activate it and the CPU temp goes down when it is idle. Perfect..
BUT now the creative soundblaster audigy 2 ex is making noises and crackles when using audio in ASIO mode. If I deactivate the CPU halt detection in the BIOS everything goes ok as before. with some more CPU degrees but sounds good. so it's a very easy and detected problem.
to MSI support team look if it's possible to fix this CPU halt detection... (or maybe new drivers from creative can fix it also... )

Thermalright SK6, SLK800, SLK900; Swiftech MCX*; Zalman CNPS6000-Cu; Alpha Pal8045T - and these are some of the best air cooling solution and most important *QUIET*
54*C idle was? Is a lot if you say is also noisy. I have a Speeze RaptorCool @2163RPM super quiet and a 12cm intank fan @ 1600RPM also quiet and I get no more than 52*C full load. And here is summer, with 30-35*C room ambient.
Those I've mentioned are rather expensive, 40-50$, you can find something cheaper (mine is 7.5$!!!). Water cooling is too expensive, more than 100$, a good one is 250-300$. So you should stick with air cooling.
*EDIT* I forgot, some of them don't come with a fan, that you can aquire separatly, Y-Tech are good, stay out of Delta 'cause are the loudest

PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

Problem:
I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
Thanx,
Oli4
Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

Creative L3500 Speaker system and Soundblaster Audigy 2 ZS Soundcard (I have a driver probl

Yes I have had a driver problem so i went to the download section of this site and picked up a driver program for my soundcard yet it doesn't work. When i do uninstall my soundcard (i need to uninstall current driver to install new driver)and i restart my comp after removing the old one i get sound, but i notice i don't get very good sound, not as good as my old before it stoped working. But then after i install new one it just doesn't work!
Please help me if you know about drivers!!!!
PS: I use windows XP and if you need any more info just request it from me.Message Edited by Nick345 on 02-28-200605:05 PM

JRe: Soundblaster Audigy 2 ZS Platinum - Speaker issues not covered by FAQs0 I'm afriad that the CMSS3D option did not work? ? I still cannot get any speakers to play out of the rear of the soundcard.
As I said before, the goal is to try to get sound to play out of both the headset and the speakers attached to the rear of the soundcard simuntaneously.
The headset is plugged into one of those devices in the front that is in a 5 & /4" bay that has the individual knobs for adjusting volume for the headset and outbound levels for the microphone.
The speakers are plugged into the back of the soundcard and do not play any sound in any of the sockets, starting from the firewire port and counting 3 over.
Any suggestions? I? thought it might have something to do with the setting of the speakers from control panel - > Sounds and Audio Devices -> Advanced and picking the right choice there. No luck however. Same for the Creative Speaker Settings as well.
I'm at wits end and I'd be very thankful to whoever can resolve this for me. =)

Static/Pop on my Soundblaster Audigy 2 in a Dell 8300 Dimension. Please help

Ok, granted my computer is 7 years old, but it has been flawless until recently. I don't know if it's my soundcard Soundblaster Audigy 2 (SB0240), my graphics card is the NVIDIA GeForce FX 5200. I have read about some NVIDIA conflicts, but nothing is new on my system since I bought it back in 2003. I have upgraded all the drivers on the SB0240 card and the graphics card and all the windows XP updates.
So could the static and hizzing mean my SB Audigy 2 card is bad and needs replacement? But before I do anything I wanted to ask the community for some advise on fixing and getting rid of the static/po
ps.
Thanks

Not that you should feel alone as there seems to be a myriad of people in the same boat as us, but I too have a similar experience. I've performed?everything posted as potential ways to resolve with no success. You mentioned that you were unclear about the PCI Settings component.
For me that seem rather simple. When the machine boots, hit whatever key needed to go into the bios (it is usually the Delete key on most systems). Look for a PCI settings that matches the latency resolution described. Honestly I never even paid attention to that setting in the BIOS before but after some poking around I found it and adjusted the settings as suggested.
I suspect that if look at all of the options in your?BIOS you'll find it.
After reading several posts on the suspect cause of the static and popping I?conceptually understand what lower the PCI latency does. Still?when you start changing things that have unknown implications, well I start to get nervous about things like that.
I took the risk because the problem is driving me nuts and I'm a bit masochistic and I won't stop until this is solved. In any event, be sure to capture the original setting so you can put it back after you're disappointed.
I must say that I was one of those that went and purchased an X-FI for another system that I bought. It doesn't crackle, it just refuses to work. I'm so disappointed as I have always used SB cards with zero issue and these latest generation ones are just not working.
Message Edited by kevvan on 03-2-2008 02:24 PM

Dual Soundblaster Audigy Inst

Oddly, this is not going well at all. Some history first.
I'm sure many would question the why's. I've seen other people post that they want to use two soundcards and everyone says why.
I play alot of video games, and use voice chat. I'd like to hear game sound from my 5. sound system, and hear voice chat in a headset.
I used to use two computers to accomplish this, but recently, my spare had a harddri've problem and went down. So i went to a local vendor and got a Soundblaster Audigy SE about 2 days ago. Testing with that and my onboard sound has been abysmal. Usually within a couple minutes, the setup will interact unfavorably with a videogame. With a game (eve-online or FFXI Online) running on one card (doesn't matter which) and Teamspeak/roger wilco/ventrilo running on the other, the game tends to get buggered up (popping sounds, then eventually the graphics either get very messed up, like the game losing track of where my character is). If i only use one app on one card, or both apps on one card, no issues.
So, last night i went and bought another SB Audigy SE, thinking that perhaps there was a clocking issue with the on board card. Maybe, maybe not, as right now, as soon as windows attempts to bring both cards online during an acti've session of windows, it crashes/reboots immediately. If both cards are started during startup, the machine throws a Kmode exception 0xe bluescreen and hangs. I did disable the onboard card before attempting any of this, and reset the ESCD via bios.
I attempted to uninstall the drivers and install both cards simultaneously by doing a fresh install, this just results in the Kmode blue screen. In safe mode, with both cards acti've, if i change the settings on one card, the settings on the other card change as well. I had read on the internet (various google results) that sometimes installing two of the exact same card will result in your system thinking both cards are the same card.
So, i'm looking for a solid "I've seen/done this and you can fix it by:..." sort of answer, but any musings would be helpful too.

I *think* you have WhatUHear as the record device. Open up the Creative Control Panel (volume) and the far right option with the word Rec as the heading may have WhatUHear under it. You can click a drop down arrow and chose Microphone. Also, in Control Panel go to Sounds and Audio Devices, Audio Tab and click volume for Sound Recording. Make sure the tick is in the Microphone column.

Creative Soundblaster Live 5.1 (SB02

Hello, I just re-installed windows XP from the scratch, and now my sound card wont work. I've tried to install the correct driver, but Windows won't even recognize that I've plugged in the card. And when I try to automatically find the correct driver, it states that it cant find any. I am sure that the card is working, because it worked perfect before I re-installed windows.
My computer specs are:
System Model: Hewlett-Packard HP d530 SFF(DC578AV)
Main Circuit Board:
Board: Hewlett-Packard 085Ch
Serial Number: FRB4400CXQ
Bus Clock: 533 megahertz
BIOS: Hewlett-Packard 786B2 v2.43 08/0/2004
Graphics Card: NVIDIA GeForce FX 5200 [Display adapter]
Processor: 2,80 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
52 kilobyte secondary memory cache
Controllers: Standard floppy disk controller
Intel(R) 8280EB Ultra ATA Storage Controllers (2x)
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Bus Adapters: Intel(R) 8280EB USB Uni'versal Host Controller - 24D2
Intel(R) 8280EB USB Uni'versal Host Controller - 24D4
Intel(R) 8280EB USB Uni'versal Host Controller - 24D7
Intel(R) 8280EB USB2 Enhanced Host Controller - 24DD
Other devices: USB Human Interface Device
Standard 0/02-Key or Microsoft Natural PS/2 Keyboard
A4Tech PS/2 Port Mouse
HID-compliant Wheel Mouse
USB Root Hub (4x)
The soundcard: Creative Soundblaster Li've! 5. (I think, not really sure)
modelnumber: SB0220
Further numbers on the card: EMU0k-JFF
648D003LQ
P6S490ASUQJT7H
If I've forgotten anything here, please tell me and I will look it up.
I also checked the HP site (the manufacturer of my motherboard) for a BIOS update, did that too. Also, somewhere else on this site there's a post about IRQ's, and how to fix those errors, and I tried that, but I cant find most of the things, like the 'Assign IRQ to USB', 'USB Legacy Support' and 'USB Keyboard Support'.
That would be
http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=39,E=0000000000795427,K=3277,Sxi=0,VARSET=ws:h ttp://nl.europe.creative.com/,case=2442
there.
I also tried uninstalling the device, and then re-install, but that didnt work either.
In the devices manager, it states, under other devices, that my Multimedia Audio Controller isnt working, as is my PCI Input Device (they have a yellow questionmark next to them). I've tried to install those drivers countless times, but it cant find any of the drivers, and uninstalling doesnt work either.
(This device is not configured correctly. (Code ))
I'd appreciate it very much if you could help me with this. I've been thinking of buying a new soundcard, but I listened to music this morning, and I cant imagine that it would break down so fast. I've been trying to find a solution for 7 hours now, and still nothing, nothing on the internet at all about this has worked for me. Its a good card too, so I dont want to get a new one
Thanks in advance

ThaDanus wrote:
Well, the thing is, I bought my pc second-hand, and I never got any cd's for drivers with it. And I'm almost certain the soundcard I have wasnt pre-installed, since it's a creative soundblaster li've! 5. card. But like I said in my previous post, now that I have found the driver (not on the creative site but on a driver-site), its working fine again. Just a little disappointed that I couldnt find the driver on your website
This is a well known issue w/ SB022x cards you did have
--> there is another solution available -->
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=272
You can also go through this mod --> http://www.tech-pc.co.uk/audigy-2.php --> you be able to get
the latest drivers and software for Audigy's installed for your card.
jutapaMessage Edited by jutapa on 04-2-2006 0:39 PM

Creative Soundblaster Audigy 2 Zs help

Similar Messages

Maybe you are looking for