Creative Soundblaster Live 5.1 Gamer

$C Hi I recently installed my Soundblaster Li've 5. card and I'm getting static sounds in the backround on Windows 7, It works fine in Windows XP and Windows Vista.. Any idea's what I can do? I've been playing with this for a while now and cant seem to grip and answer. I've tried messing with the sound quality by lowering the HZ in control panel, still no luck.
Thanks

Your sound card might be getting to old. You might be force get audigy card or better. @97.87.26.25

Similar Messages

Creative Soundblaster Live! 24-Bit External card - noise in right chan

I have a Creative Soundblaster Li've! 24-Bit External card installed on a Dell XPS 40 with 2GB RAM and Windows XP to replace integrated sound that came with the system, a sound problem developed recently that I never noticed before, there is a popping sound in the right channel which isnt loud but noticeable when no other audio is playing, the sound is a fast popping sound like a idling engine, Ive tried updating the Nvidia video drivers, uninstalling software that may have caused conflicts, looking in the bios, I also tried uninstalling the Creative drivers and before installing the drivers again when the system booted and detected the new hardware I could hear the popping noise without any drivers loaded yet, nothing has helped this problem, does anyone have any suggestions of what is causing the noise? Thanks for any helpMessage Edited by Gary040 on -5-2008 07:38 AM

Yes exactly as you mentioned. I have SoundBlaster Li've! 24-Bit Internal and facing the same problem. All is working very good, but only sound in WOW is terrible: it's muffled, degraded and seems to runs only in 22khz.
It is a big irony because i bought this card only for WoW to replace my onboard card and now the old one sounds much better in WoW as the new SB
Anyone with help?
Now it seems that I return my card like you... and people from creative, think about it! WoW is most played game ever!Message Edited by magnetique on 0-06-2006 :24 AM

Creative SoundBlaster Live! 5.1 Digital driver update - wont wo

Hello I've had this problem for as long as I can remember. I have already searched the forum in hope that I would find a solution. I didn't.
Ok, this is how it is. About two years ago I bought computer parts which I assembled together and "Creative SoundBlaster Li've! 5. Digital RETAIL PCI" was one of them.
I have tried every single driver you have under your support page and none of them will work! I always get the message:
"Setup could not detect any Sound Blaster Audio card on your system.
Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
Setup will now exit."
Right. All drivers gives me this. I know that you guys will probably ask after the serial number now but I'm too lazy to check at the very moment and I know that the serial check will be a SB Li've! 5. digital card anyway so I don't see how that would solve this issue you are having with your, sorry to say this, outdated installs.
The card is installed correctly in the device manager as "Creative SB Li've! series". And how come I can install it from the CD but not from your internet drivers?
I'm using Windows 2000 Professional with service pack 4 by the way.
Is there a chance these installs wont work with latest service packs, that they were designed for earlier service packs and Microsoft maybe changed the way to detect hardware in later service packs?
I'd appreciate any help I can get because I really need to update my drivers, I got a small sound problem now it seems (soundeffects volume goes down and there is a bit of distortion when it's too many of the same sound playing - or when a soundeffect is to loud).
Thanks for a great card in general, I'm going to buy (I don't remember the name now) one of those new cards later on - that is suposed to be over 4 times better than the previous soundblaster cards? .

Hmm, the install extracts files but not in the current directory or in windows temp. How would I extract the content from the install file so I can patch it's
EDIT: I extracted it with winrar and I got the following files:
data.cab
data.hdr
data2.cab
Diagnose.cab
disk.id
Driver.cab
ikernel.ex_
layout.bin
PC3.cab
Setup.exe
Setup.ini
setup.inx
Wstudio.cab
I know there should have been some sort of audio folder here but I didn't find any, so I tried the program and it said patch applied and all that. I try to run setup.exe and it will still not work. Probably because I'm doing it all wrong :P.Message Edited by Ice_ on 06-5-2006 04: AM
EDIT2: Ok I got several driver files so I just extracted "Li'veDrvUni-Pack(ENG).exe" to C:\sb\ and ran the tool as you described. I could launch the install without problems. By the way, Li'veDrvUni-Pack(ENG).exe is containing the latest drivers as well right? So I dont need to do this with "Li'veDrvPack_Patch.exe" as well?
Thanks!Message Edited by Ice_ on 06-5-2006 04:5 AM

Creative Soundblaster Live 5.1 (SB02

Hello, I just re-installed windows XP from the scratch, and now my sound card wont work. I've tried to install the correct driver, but Windows won't even recognize that I've plugged in the card. And when I try to automatically find the correct driver, it states that it cant find any. I am sure that the card is working, because it worked perfect before I re-installed windows.
My computer specs are:
System Model: Hewlett-Packard HP d530 SFF(DC578AV)
Main Circuit Board:
Board: Hewlett-Packard 085Ch
Serial Number: FRB4400CXQ
Bus Clock: 533 megahertz
BIOS: Hewlett-Packard 786B2 v2.43 08/0/2004
Graphics Card: NVIDIA GeForce FX 5200 [Display adapter]
Processor: 2,80 gigahertz Intel Pentium 4
8 kilobyte primary memory cache
52 kilobyte secondary memory cache
Controllers: Standard floppy disk controller
Intel(R) 8280EB Ultra ATA Storage Controllers (2x)
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Bus Adapters: Intel(R) 8280EB USB Uni'versal Host Controller - 24D2
Intel(R) 8280EB USB Uni'versal Host Controller - 24D4
Intel(R) 8280EB USB Uni'versal Host Controller - 24D7
Intel(R) 8280EB USB2 Enhanced Host Controller - 24DD
Other devices: USB Human Interface Device
Standard 0/02-Key or Microsoft Natural PS/2 Keyboard
A4Tech PS/2 Port Mouse
HID-compliant Wheel Mouse
USB Root Hub (4x)
The soundcard: Creative Soundblaster Li've! 5. (I think, not really sure)
modelnumber: SB0220
Further numbers on the card: EMU0k-JFF
648D003LQ
P6S490ASUQJT7H
If I've forgotten anything here, please tell me and I will look it up.
I also checked the HP site (the manufacturer of my motherboard) for a BIOS update, did that too. Also, somewhere else on this site there's a post about IRQ's, and how to fix those errors, and I tried that, but I cant find most of the things, like the 'Assign IRQ to USB', 'USB Legacy Support' and 'USB Keyboard Support'.
That would be
http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=39,E=0000000000795427,K=3277,Sxi=0,VARSET=ws:h ttp://nl.europe.creative.com/,case=2442
there.
I also tried uninstalling the device, and then re-install, but that didnt work either.
In the devices manager, it states, under other devices, that my Multimedia Audio Controller isnt working, as is my PCI Input Device (they have a yellow questionmark next to them). I've tried to install those drivers countless times, but it cant find any of the drivers, and uninstalling doesnt work either.
(This device is not configured correctly. (Code ))
I'd appreciate it very much if you could help me with this. I've been thinking of buying a new soundcard, but I listened to music this morning, and I cant imagine that it would break down so fast. I've been trying to find a solution for 7 hours now, and still nothing, nothing on the internet at all about this has worked for me. Its a good card too, so I dont want to get a new one
Thanks in advance

ThaDanus wrote:
Well, the thing is, I bought my pc second-hand, and I never got any cd's for drivers with it. And I'm almost certain the soundcard I have wasnt pre-installed, since it's a creative soundblaster li've! 5. card. But like I said in my previous post, now that I have found the driver (not on the creative site but on a driver-site), its working fine again. Just a little disappointed that I couldnt find the driver on your website
This is a well known issue w/ SB022x cards you did have
--> there is another solution available -->
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=272
You can also go through this mod --> http://www.tech-pc.co.uk/audigy-2.php --> you be able to get
the latest drivers and software for Audigy's installed for your card.
jutapaMessage Edited by jutapa on 04-2-2006 0:39 PM

No FX-Sound by creativ soundblaster Live! series

Hi @ all,
since two days i?ve got problems with my sound (see above):
if i open my audio HQ and click on "speaker" i get the following message (translation fro german):
Creative sound mixer
there is no mixer in the system, mixer will end.
if i delete the driver, shot down the computer and try again, it works, the menue opens, but if i start any game which needs or uses fx-sounds, there ist no fx-sound. I end the game, wanna click an creative sound mixer and get the same message like before.
How can i fix the prob.
thank a lot for all help
sandy7

Seventhwind,
Did you check Speaker Settings application and ensure that the Digital Output Only option has not been enabled.
Also disable any onboard audio from the BIOS if any.
Jason

Creative SoundBlaster Live! 24bit Crashes system on Gigabyte's GA-G19

Hi,I have lately purchased the Gigabyte Motherboard Model No. GA-G975X, with the onboard Creative CA006 chip. (Sound Blaster Li've! 24bit)I use an Intel Pentium 4 processor 3.4GHz , 800MHz FSB, 2MB L2 Cache.I use .00GB of RAMMy OS is Microsoft Windows Professional Version 2002, Service pack
My Problems are:
The sound of a played media stops abruptly and keeps repeating with a high pitch till it shuts down the player software & the System.</LI>
The OS restarts.</LI>
I have noticed that the problem occurs if I try to use another program or service beside the one using SoundBlaster. (ex. dialup using a phone line.)
I tried the system with all creative drivers uninstalled the problem was gone.
Have you got any clues about the cause and the solution.

Best Regards,[email][email protected]]Vittorio[/url]


Exactly same behaviour with G975x MB !!! The CA006 chipset is not anouncing itself correctly to the APIC HAL Windows XP system (Hardware Abstraction Layer). First, the card was not correctly detected by the system ! I got an audio controller detected in component manager but driver or Creative setup are not able to detect hardware !
After many complaints at Gigabyte or Creative, no answers for this problem or only evasi've answers. Windows registry are detecting these components :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\P CI\VEN_02&DEV_0007&SUBSYS_0602&REV_00\4&bc67b8d&0& 28F0
where VEN_02 is for CREATIVE Labs.
Here are the HardwareIDs detected :
PCI\VEN_02&DEV_0007&SUBSYS_0602&REV_00
PCI\VEN_02&DEV_0007&SUBSYS_0602
PCI\VEN_02&DEV_0007&CC_04000
PCI\VEN_02&DEV_0007&CC_040
But for 24bit li've (or audigy2 CA006 LS) hardware ID must be SUBSYS_00602 and not SUBSYS_0602 to be detected by creative setup or installed manually by P7.inf setup file !!! The P7CPI.dll file is not accessing correctly hardware and is faulty !
Installed manually, the card is not responding or crash system, and windows startup time is increased by 5mn, at least !
To resume Chipset are not correctly detected or are corrupted, and only thing to do is to RMA the motherboard as I !!!
This problem seams to be a standard behaviour from CREATIVE chipsets product line and many users are experiencing the same problem... Both Creative and Gigabyte are not responsible for that bad use of their product !!! Sure !!! Always bad naughty users are doing bad things with their boards, like playing tennis with, or trying to have a good shower with these scrappy cards !!! Everybody knows that we are all stupid basic lambda users with no idea about what is a mobo used for !!!

Driver for Creative Soundblaster Live! 5.1 for XP

What is the latest driver for that card?

Officially this,
<a rel="nofollow" href="http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=50& prodName=Li've"]http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=50& prodName=Li've[/url]!%205.&subCatName=Li've!&CatName=Sound+Blaster
Unofficially this,
<a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack--5-08-09-2009/td-p/53386"]http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack--5-08-09-2009/td-p/53386[/url]

Help me with my Creative SoundBlaster Live! 5.1 .

Somebody?
It's quite annoying . . . Everytime I shutdown or restart my PC, the Subwoofer would generate a hum that last through the shutdown and restart process. I have updated the drivers already, gone through the knowledge base section but to no avail.
Another problem is that it often hangs when I am playing Generals, the system will just hang and gives out a continous tones over the speakers.
My PC is powered by Intel Decktop Board D865PERL, Pentium 4 3E Processor, GB Memory. The Sound system is in 5. configurations.
I have also acquired the latest updates from Intel for my BIOS.
Thank you in advance.

WildSwan,
Try doing a cleansweep and reinstall of the sound card to see if perhaps the updated drivers did not install correctly. Follow these instructions to cleansweep:
http://us.creative.com/support/kb/article.asp?l=2&sid=72
Jason

Blue screen after installing creative soundblaster live 24-bit exter

hey,have a bit of a prob here...i get random crashes after installing my external soundcard which i've just bought...i'll get the blue screen everytime it happens but unable 2 catch the blue screen msg as it flashes for 2 secs...anywayz i'll explain my com setting...i'm using a acer travelmate 270,about 3 yrs old now...it has 3 usb . ports at the rear n i added 2 usb 2.0 slots via pcmcia card...i connect my external hard disk using the 2 usb ports at the back as port has not enuf power..so that leaves port...n the pcmcia card ports i attach a external cd burner n a usb 2.0 hub....could it be that the error msg im getting is due to the lack of current in my laptop?is there a way 2 check the power capacity on the usb ports?the blue screen has appeared numerous times alredi n is very annoying...but i managed to solve the prob though for now when i go to control panel/sounds and audio devices..then under the volume tab,i goto speaker settings/advanced/performance..in here,i lower the hardware acceleration bar to the 2nd bar n the sample rate conversion quality bar to the st bar ...the crashes haven't happenned so far....but just wanna get anyone's opinion on why the blue screen crashes happen...isit bcoz my laptop is unable 2 supply sufficient power to the external soundcard when functioning at its full capacity?(causing me 2 lower its performance via lowering the bar)any help would be much appreciated...thanx.....

Have you try installing the X2 Dual core processor driver?
http://www.amd.com/us-en/Processors/..._87_38,00.html
Jason

Please Read , my mic isnt working (creative soundblaster live! 24b

Just now i installed my sound blaster card and installed the cd that came with it , i dont hear any sound and my mic is not working i have unmuted the mic in sourrend mixer , but still nothing. Also im using a headset (planatronics audio .90's).
i have my connecters like this:
lineIn(mic connecter is here) lineout(headset connecter is here) lineout2(nothing)
lineout3(nothing)
So can anyone help me? thanks

Go to the mixer and make sure "Digital Output Only" is not checked. This will take care of the sound, but I think you'll find that your microphone will still not work. I am in the same situation.
I would really appreciate hearing from someone as to how to get the microphone to work.

Creative Soundblaster Live 5.1 Pla

Hello,
i am new to this forum so i hope someone could help me with my Problem.
I have the above mentioned soundcard. The following problem i have.
When i want to play a soundfile with any Player (Windows Media Player, Winamp and so on) and put the Sound Volume at the Subwoofer to Maximum...there is a background sound. It sounds like a hisshing or something like that. Its nearly the same sound you hear when you put a shell from a oceansnail to your ear. Its allways the same loud and its only disapear when you put out the sound in the Audio HQ.
Did anyone ever has souch problem an how i could fix it's
For any help or information i be glad
Take Care
Fred

Hmm, the install extracts files but not in the current directory or in windows temp. How would I extract the content from the install file so I can patch it's
EDIT: I extracted it with winrar and I got the following files:
data.cab
data.hdr
data2.cab
Diagnose.cab
disk.id
Driver.cab
ikernel.ex_
layout.bin
PC3.cab
Setup.exe
Setup.ini
setup.inx
Wstudio.cab
I know there should have been some sort of audio folder here but I didn't find any, so I tried the program and it said patch applied and all that. I try to run setup.exe and it will still not work. Probably because I'm doing it all wrong :P.Message Edited by Ice_ on 06-5-2006 04: AM
EDIT2: Ok I got several driver files so I just extracted "Li'veDrvUni-Pack(ENG).exe" to C:\sb\ and ran the tool as you described. I could launch the install without problems. By the way, Li'veDrvUni-Pack(ENG).exe is containing the latest drivers as well right? So I dont need to do this with "Li'veDrvPack_Patch.exe" as well?
Thanks!Message Edited by Ice_ on 06-5-2006 04:5 AM

Screeching sounds in games and other problems with Soundblaster live extern

Okay i have the USB external Creative soundblaster li've sound card. i have had a few problems. My first problem is When im in games such as Americas Army i get random Screeches like a tin can being scraped on concrete. My 2nd problem is Talking with my mic. For others to hear me MONITORING has to be enabled, there for i hear myself out of my own speakers as well. I have done everything to try and fix this, i've tried updating drivers, rolling back drivers, using windows automatic drivers. Is there an option i dont see that is causing my card to not sound good? I am using a 2.0 speaker configuration, and i only play the games with headphones on.
please help.
thanks for your time.Message Edited by Zombeh on 0-6-2006 08:30 AM

You waited 24 hours and gave up? So I'll offer this for anybody else who reads the thread. I have a USB external SB card, but it's in a box somewhere. But IIRC, the Volume Controls work similar to other SB cards. In Volume Controls, Playback, mute the Microphone. In Volume Controls, Recording, select Microphone. This should let you "record" without hearing it on your speakers. Now if a game sets the mixer options for itself, that complicates things. If allowed, choose game audio options similar to these Volume Controls.

Soundblaster live gameport not working on k7n2 delta-L

i have a k7n2 delta-L motherboard and i installed a soundblaster live sound card and can not get the game port to work at all. first i thought it was a bad card so i installed a different card and the same thing so ithen thought it was the game controller and tried a different one and it didnt work either . and yes i disabled the on board sound in the bios before installing the card. i have it in ide slot #3. seems to be the best to go with .i am running win 98 se. and all my drivers are up to date. any help would be greatly appreciated. thanks

fourhooffarms,
In the BIOS Disable the onboard Realtek Sound and then put the Live! in PCI Slot 3 or 4, then set the IRQ of that Slot to IRQ5.
Also list all your IRQs and every Device on each IRQ.
Take Care,
Richard
P.S. Do list the specs on your Power Supply too.

SoundBlaster Live! 24 and Vista - Deteriorating Sound Qual

I've recently upgraded to Vista Business, and my system informs me that except for the drivers for an ancient scanner all is working properly.
When playing music (using a Creative SB Li've 24bit card with the most recent driver installed), all starts off well (in fact playback is better than under XP Pro) but the sound quality starts to deteriorate badly, especially when I open a browser. Quite often the browser itself seems to freeze.
I have 3Gb RAM, with a 3.60Ghz P4 processor.
Task Manager tells me that often I am running at 00% of CPU capacity, though the problem seems to occur at lower usage too.
I've checked everything I know to check but just can't seem to get to the root of the problem. Can anyone suggest anything I should be looking at?

Sadly no real progress.
I simply pulled the Soundblaster Live 24 out of the computer and am using the onboard sound instead which at least for me Arch recognized just fine.
I haven't been able to get any suggestions for why the Soundblaster was not working, but I am going to try another sound card a friend lent me and see what happens.

MSI K9N DIAMOND CA0106 chipset AUDIGY or SOUNDBLASTER LIVE 24

I have 2 PC's one with an MSI K8N SLI PLATINUM mobo with onboard SOUNDBLASTER 24bit li've (CA006)
http://global.msi.com.tw/index.php?func=proddesc&prod_no=69&maincat_no=&cat 2_no=&cat3_no=
This system has run fine for over 2-/2 years now with no troubles it was connected to my PIONEER VSX 86 via SPDIF/toslink? and has excellent sound and performed all that I wanted including DTS DVD's and all my music video clips, DIVX movies etc etc
The trouble is, I have just setup my new system
MSI K9N DIAMOND also with the onboard Creative sound (CA006) and comes supplied with the Creative Audigy disc
http://global.msi.com.tw/index.php?func=proddesc&prod_no=028&maincat_no=&ca t2_no=7
When I try to install the drivers/setup disc it tells me that there is no Audigy onboard/installed? I have managed to install the drivers/disc from the previous soundblaster li've 24bit, It does work with the Audigy goldmine demo and has all channels of sound as it should but in the Surround mixer speaker settings it will only sound out 2 speakers even when it shows all 5. as it is currently configured
I have tried to download many other drivers with no luck
My main concern is the creative programs from my old system are not what I want, I paid for an AUDIGY setup not LIVE
Is it possible to get the AUDIGY onboard running as it should (showing AUDIGY in hardware manager, not LIVE 24bit)
I would like to be able to run the newer software from the AUDIGY disc but it is not compatible when the LIVE drivers are installed
I have had one set of drivers display AUDIGY in the hardware manager but when I tried to use the speaker settings etc it fails and says soundcard not found even though it clearly shows AUDIGY drivers are installed
I have been very happy with the creative sound so far on my first MSI system but I'm not very impressed with this setup and I'm still not sure who's fault it is MSI or CREATIVE?
Can someone give me some details as to what is going on here, I would like to know if it is also possible to use some kind of new software/programs for the soundblaster LIVE that has maybe more settings/functions or just a later better style as I may have to use the same on my new system
The menu's etc in my new manual (K9N DIAMOND) look almost identical to those included with the K8N SLI, The disc included with the K9N DIAMOND has an AUDIGY quick start program/demo which gives you a preview/guide on how to use the supposed AUDIGY which has all new menu's, layout and features which im unable to use?
As mentioned I have used the soundblaster 24bit LIVE for well over 2 years now connected to my PIONEER VSX86 via a digital cable so all the previous settings etc have been compared and doublechecked but im unable to find answers, If I am unable to find help or any way to install the AUDIGY as im meant to have I may resort to fitting another soundcard and I may got to another brand unfortunately
Any help appreciated

If I am right the onboard Audigy on the MSI K9N Diamond utilizes the CA006 chip instead of the EMU0k2, therefore it is not a real/genuine Audigy soundcard. In fact it's the same as your former soundblaster li've 24bit which also utilizes the same CA006 chipset. That's why you can use the driver from the SB li've 24bit for your new "Audigy" onboard sound. Also there are other soundcards that are not genuine Audigy soundcards: Audigy Se, Audigy LS and, yes, also the X-fi Xtreme Audio, all utilizing the same chip, CA006. Creative Labs use some marketing techniques, add some different (newer) software/apps for the soundcard and give the soundcard (with the same chipset) a different name. In my opinion, if you for example buy a X-fi Xtreme Audio you in fact for the most part paid for the included newer softwares (which for example add "X-fi features like Crystalizer etc.).
If you really want a better soundcard, maybe go for the X-fi XtremeMusic or XtremeGamer which utilizes the genuine EMU20K chip (with hardware acceleration). The soundquality is significantly higher than the soundcards with the CA006 chip.
As for the drivers for the soundcard:
Official Creative Labs driver for Sound Blaster? Audigy? Value/SE/LS, or Sound Blaster Li've!? 24-bit audio devices
Good luck!
Message Edited by CTman on 05-07-2008 0:28 AM

Creative Soundblaster Live 5.1 Gamer

Similar Messages

Maybe you are looking for