Creative Stream Recorder stops while recording with "net busy&qu

Hello.
Using SB Audigy 2 Platinum.
Every stream I'm trying to record (all youtube URLs) stops at exactly the same point in the "communicating" phase, at about 75% of the way, with "(net busy)" message until times out.
Tried all connection types (even though I'm connected via cables).
Please assist,
Thanks,
Mor

Yeah that was using Fraps.
I'm not exactly sure what Direct Stream is, but to me (correct me if I'm wrong) it sounds like Fraps is getting the audio from DirectSound, which in vista is completely software based and when OpenAL is used in the game, Fraps using Direct Stream recieves no audio, hence no sound.
I'm still not sure why 'What you hear' is very distorted and crackly, that's a work in progress

Similar Messages

Creative Smart Recorder with new driver

'Creative Smart Recorder with new driver< I have a Sound Blaster Audigy 2v purchased and installed in Oct, 2005. I use the Smart Recorder a lot and all was fine until two weeks ago when I downloaded and installed new driver software from Creative. All of the rest of the software works fine (no change or improvement in the operation in the card, which is why I went for the new driver), but?now when I try to start the ?Smart Recorder I get a Windows message "Creative Smart Recofder has encountered a problem and needs to close. We are sorry for the inconvenience."? It asks if I want to Send Error Report. As far as I can tell Smart Recorder never opened. Other than putting my computer back into the what it was two weeks ago is there anything that I can do? I'm not sure that the previous driver, etc. is still there. Thank you.

+ Need to add something. I thought that if a program loaded I was okay. But, no. The media studio will load but is no longer connected, I mean nothing will record, not from the internet or the CD player. No connection. Whatever Creative gave me, it is not friendly with older versions of the software.

Audio stream recorder with Audigy 2 Plati

I have never been able to get the audio stream recorder to work. I've used creative's online update, so everything is current, but when I tell the stream recorder to update the content directory, it just tells me the update failed. I've never been able to use this thing as it's never downloaded any content. I've also pasted in the URL to the stream I'm trying to record, but it doesn't work. Any advice?

I found the information I was looking for, apparently the server service Creative was using shut down, and though the stream recorder was a component advertised with this line, they never came up with a replacement. It is unfortunate that this is the kind of support I've come to expect from Creative.

Start stop while loop with tab control

I want to be able to start and stop a while loop by entering and leaving a tab. I am using an event structure to do so but it doesn't seem elegant or the right way to do this. The only way I was able to get it to kind of work is by unchecking the lock front panel box in the event structure. I have attached a sample vi of what I have so far.
Solved!
Go to Solution.
Attachments:
Loop test.vi ‏16 KB

The problem is that you can't even stop the program by hitting the stop button until you leave the tab, which is not a friendly user interface.
Event structures should just handle basic user events. Any given event case should not take a long time to run. While you are in the diagnostics tab, your code is stuck in that while loop. Although fixing the lock front panel allows you to do other things, the LabVIEW is just queuing up all of those other UI events (like Stop button value change) and can't handle them until the inner while loop stops and allows the outer while loop to iterate again.
You should have a parallel while loop to handle the waveform graph. You can use notifiers or queues or an action engine FGV (see Ben's Action Engine Nugget) to pass the starting or stopping of the waveform graph update to the parallel while loop.

Creative Zen Xtra stopped loading music with 5.7g space left? H

Ive been using my 30g Creative zen xtra for close to two years loading ripped cds using mediasource. I have .20.8 firmware and have had no problem.Last night with zen showing 5.7 gis of space left I tried to load a few ripped cds as usual using mediasource and usb. The action went the same as usual with mediasorce telling me songs were being tranfered but when completed they were not in player. I tried it a few tims with different usb ports and cords but still songs not in player. The only thing Ive done different is last week I used player interface to delete one cd and it went fine.
My biggest fear is having to reload close to ten thousand songs back into my Zen Xtra if i loose them trying to get transferring to work again. If I use the scandisc feature would that cause my library to need to be reloaded?Perhaps i should just leave well enough alone and just use the zen as a player of all my music and not try to fix it. I know there is 5.7 gigs of space left,I have been encoding my songs at 96 bites so space should not be an issue.Any help would be greatly appreciated. thanks [email protected]

mattg3 wrote:
Would clean up from recovery mode help solve this problem without loosing my music content?
Hard to say whether it will help but you can try. Cleanup shouldn't delete any of the content unless the player has gone completely haywire.
Jason

How to stop the guesswork with printing business cards

Hello everyone, when I print business cards I use one of those 10 blank business cards per sheet paper.
I scan the image of the blank business card template, then I import to Illustrator and then I make the business cards.
The problem is when I print sometimes I get some of the design cut and have to print again until I get it right.
My question is how do I get rid of the guesswork when it comes to printing business cards on a 10 card per sheet? (I believe the problem occurs because my scanner is not exactly 8 1/2 by 11 and therefore there is some margin for error)
I know I could use Indesign, but since I don't have Indesign (and may not have it in a future graphic design job) how do I do it in Illustrator?

There should be no guesswork if you set up your Artboard, guides, etc., accurately.
I never do this by scanning and tracing a card template sheet, by the way. It only takes a few minutes,to take accurate measures from the sheet and enter the dimensions for guides, etc., numerically. That way you are confident, for example, that you do, indeed, use consistent spacing between rows & columns of die cuts. And the question of any scaling/position/distortion from your scanner image becomes moot.
Then you simply have to design to accomodate the inaccuracy of the specific printer--which is almost certain to be the cause of the misregistration--just as one has to do for a printing press. Paper jogs somewhat as it proceeds through a commercial offset press, just as it does (albeit to a greater degree) on an office copier.
If you design graphic elements which are supposed to print all the way to the edge of the cards, make sure those elements bleed beyond the edges of the die cuts. For this reason, try to find card sheets on which the cards do not share edges, but have spaces between them. If you can't find such sheets, then limit yourself to designing bleeding objects which can span across whole rows or columns of cards.
What Scott says about availability of cheap printing online is true. You can also get short-run, on-demand, decent-quality, digital printing in places like Kinko's, Office Depot, etc. But often, the whole point of this excercise is to provide the client (or workgroups in your own company) the convenience of printing a few cards at a time on a desktop device or a networked office printer.
Delivering the card design as an Enabled PDF is great for this; you can create editable fields for the changing content (names, phones, etc.,) and the one document can work for the whole company. Any user can edit the fields in Adobe Reader, save the edits, and print the pre-cut sheets on a suitable office device, or at a quick-copy shop.
Also, consider the actual need for die-cut stock. Even a quick-copy shop running a decent digital press most likely has a paper shear also. Your real materials cost is much higher per card with pre-perforated sheet, toner, and inkjet cartridges, and you have to fuss over the suitability for inkjet versus laser devices. You're paying for convenience at the sacrifice of quality.
JET

Recording stream suddenly stops

Hello.
Our team is developing an application that allows users to communicate via their own camera, and make a record of all user's cameras that are in the same room. However we have come across an issue with our FMS 4 server. The issue is that sometimes when a user records all streams in a room at one point the recording process for particular streams suddenly stops but at the same time streaming is still working. For example, 2 users were broadcasting and one of them was recording their streams. At the end of the recording there were 2 flv files, however one of them was only a quarter of the actual length.
The logs for the damaged stream were:
- publish stream at 10:48:38
- play stream at 10:48:38
- record stream at 10:48:44
- unpublish stream at10:53:11
- stop stream at 10:53:12
Total length of the flv file should be more than 4 min but actually it is only 1 min 12 sec. Any ideas?

perconte2121, this is a pretty old thread, but just in case you are still stuck with the problem, the solution offered by ctdavids here: https://forums.adobe.com/thread/865510 worked for me!
The problem was that the recording stream was being assigned to a variable inside the function (that starts the recording) is enough to start the recording. But, within a few minutes, the variable would get garbage collected. This would make the recording to abruptly stop with no status notifications or error messages.
To fix the issue, just put the variable inside of a global object, say,
recordingStreamReference = Stream.get('recordingIsHere');
strMaps[recordingStreamName] = recordingStreamReference;
where strMaps is the global variable (Object), recordingStreamName is just a unique name for the recording, and the recordingStreamReference is the variable that has the recording stream.
Hope this helps!

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Reducing time while Filtering Out New Records with the Same Key

Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
Sam

Hello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software?

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software? If so, what version do I need and can I download it from Adobe.

I have adobe creative suite 5.5 and have just bought a Sony Video Recorder with 4K. What preset should I use for importing video footage? Alternatively do I need a more recent version of the software? If so, what version do I need and can I download it from Adobe.

Error while recording with fire fox (4.0) browser.

I am from ACS - MCSP QA Team,
I am getting the following error message , while recording with Fire Fox (4.0) Browser.
*"Cannot get a connection from the browser helper after 15 seconds. Do you want to*
*continue waiting for the browser to load?"*
Note: Before record , I Set the default browser as fire fox.
Could you please guide me regarding this?
For Screen shot please refer the below link,
http://imageshack.us/photo/my-images/847/osfirefox.png/
Edited by: 876356 on Aug 1, 2011 5:31 AM

Hi,
OATS 9.21 supports Firefox 3.5 and 3.6.
Cheers,
Jamie

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

Linux installtion file for Creative MediaSource Player & Audio Stream Recorder under GPL licen

I have Sound Blaster Audigy 2 sound card are where any Linux installtion file for Creative MediaSource Player & Audio Stream Recorder under GPL licens ?

I don't think so. Creative's product CD installation seems to support Windows OS only.

When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?

When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?
A few weeks ago, my camera doesn't do that, but since 1-2 weeks it becomes impossible to record with it.

Hi mstearns59,
If you are having issues with the audio in a movie in iTunes and video playback issues I would suggest that you troubleshoot using the steps in this article -
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
Thanks for using Apple Support Communities.
Best,
Brett L

QT Pro won't stop recording with USB drive plugged in

A strange thing started happening. I have been recording student presentation for about a year. I record with a videocamera and firewire using QT pro (7.5.5). I then copy those short files to a their USB thumbdrives. What just started happening is that when I try to stop the recording, the beachball keeps spinning and spinning and I have to Force Quit. The recording is okay and on my desktop, but every time I try to record again, it happens again. Sometimes it hangs up so bad I can't even bring up the force quit dialogue box, and I have to use the power button to shut down. After trashing prefs etc, repairing permissions, re-installing, checking disc (using an external startup disc), I can't stop the problem. I found that if I do not have the drive plugged in, all goes well. I can stop the recording, then put in the drive and copy the file, and then remove the drive and start my next recording. If I have to, I'll do that, but I'd like to go back to the way it was. I can't think of what I might have installed that messed things up. I got rid of a couple of things that I thought might have done it (macam, and wvm something or other) but no help.
I had problems when 7.6 was released and I upgraded, so I'd rather not do that again (QT would not open, everything crashed and burned - was able to copy files and do a clean install, but it was a nightmare).
Any other suggestions would be appreciated.
Thanks,
Rob

So unplug the USB drive, already. Record all to the hard drive and put them on the USB later.

Creative Stream Recorder stops while recording with "net busy&qu

Similar Messages

Maybe you are looking for