Creative System Information probl

Hi to all,
I have problems with Creative System Information, specially when I go to Creative Products tab. There, I am able to go everywhere except Software. When I clicked there and click something there, then I try to go some other area there, the program hung. The program does not respond anymore. Main executable szAppName: CTSI.exe, szAppVer: .025.0, szModName: hungapp, szModVer: 0.0.0.0, offset: 00000000. Do you know how to resolve this? I downloaded the program in the Internet in the Creative support section. I uninstalled the program and reinstalled it but that did not solve the problem. Do you know what is going on and the solution? Your help will be greatly appreciated.
Thanks, Porfirio

You might just try reinstalling the drivers & software first, see this http://forums.creative.com/creativel...d=23573#M23573

Similar Messages

Creative System Information with conflict with Nero Expr

Hi to all,
I noticed that I could not access the Creative System Information (CSI) in the Creative Products tab in the area of Creative software, anything under that. I was able to go to 40 software number but no to the information of each software. The CSI hanged or stopped responding. I needed to close the program. I found the cause of the problem. I encountered the problem so far only when I have Nero Express 6 or demo even Nero 5 installed. When I uninstalled that Nero program, I had access again to all the information under Creative software, 40 of them. It looks that there is conflict between Nero and CSI. Does anybody notice this too? What is going on and what is the solution? You help will be greatly appreciated.
Thanks,
Medico

Solution! I discovered the problem causing the system crash, and I think it is sufficiently interesting to note here so that others may benefit from what I discovered. First, there is no fundamental problem/conflict with the driver for Webcam Live Pro. The trouble in my instance is that I was running another program that utilized the web cam, and that program conflicted with the Webcam Live Pro program that was constantly running in the system tray. Basically, the program in the system tray is loaded with the set-up for Webcam Live Pro. It constantly monitors the computer system to see if the cam is connected to the computer. When it does this while another program is using the cam, the conflict occurs, causing the entire computer to reboot. The solution is to right mouse click the icon for Webcam Live Pro in the system tray, go to settings, and to remove the check that allows the program to check for the presence of the web cam. Just to be safe, I then also exited the Webcam Live Pro program from the system tray so that nothing from that program could interfere with my use of the webcam using another program.
The result is that the webcam is rock solid, with no system crashes. I have been running it nonstop for hours without a problem.
I hope this helps someone else.
Best,
CB

Retrieving Creative System Information and Software Autoupdate Iss

Hello,
I've been having a problem with a few things in my X-Fi Platinum software.
First when I attempt to retrieve the System Information using the Creative tool, I get an MS error report stating a problem with ctsi.exe and as such I've been unable to send proper information to tech support, so I'm attempting here.
Second whenever I attempt the Software Autoupdate I get another MS error report and the program closes down stating a problem with iexplore.exe . I get as far as installing the Acti've X controls, but shortly after installation the error report pops up and my browser closes down. I've attempted to remove the Acti've X controls and reinstall it but to no avail. I've un then reinstalled the software and drivers but with no hope towards this issue. I have reinstalled IE
These features were working for me on my last configuration, however after changing motherboards when the previous died, it has come to an abrupt end. The previous motherboard was an older version from the newly installed. I am unable to determine if this is a mobo issue as the only problem I have with this system is certain aspects of the sound cards' software, and the mobo is the only change that has been made.
My relevant system specs are as follows:
Motherboard: Asus P4P800 SE
CPU: 3.0 GHz Intel Pentium Prescott
RAM: Gb Kingston
Chipset: Intel 865PE, ICH5R
OS: Windows Media Center 2005 Edition
I have attempted a clean install of the operating system itself, installed all Windows updates aside from .NET Framework 2.0, and also reintalled Direct X.
I looked into other trouble threads with no solution found although there may seem to be Asus issues, the only difference is a slightly different model, (previous motherboard was an Asus P4P800X and everything ran fine with the Creative software). These are the only two features that are not working for me, every other aspect runs perfectly fine. On my previous configuration, there were a few critical updates installed, however when searching the downloads section, those same updates are not available there. MCE and XP I understand are almost hand in hand, but would rather not use the wrong firmware or drivers by any means.
I am at a loss, any help would be greatly appreciated including any relevant threads I may have overlooked. If any other information is needed to troubleshoot the issue, please let me know.
Thanks

You might just try reinstalling the drivers & software first, see this http://forums.creative.com/creativel...d=23573#M23573

Creative Installation Information

C:\Program Files (x86)\Creative Installation Information
Hi, what is this folder for?

% it stores the information for Web Updates installed on your system through the Creative Auto Updater program. The folder is also created if you manually install a driver by downloading the Creative.exe and unzip it, and then manually browse to the folder.

My system information on my Mac is not opening and I cannot view my storage info and serial number.

Every time I try to view More Info on my Mac, all the System Information ever does is load but not open. What should I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Error while reading PO in backend system Inform system adiministrator

Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj Malhotra

Hi
Have you tried out this ?
There are two BADIs which might help you in achieving the job.
BBP_EXTLOCALPO_BADI [Control Extended Classic Scenario ]
and
BBP_GROUP_LOC_PO
[Exit Grouping of Items for Local Purchase Orders]
Read the documenatation first, using transaction - SE18
before implementing them for your requirement.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while trying to access system information for AS Java

Hi,
I´m not sure if this is the correct forum so if I'm wrong please let me know to move it to the correct one.
We are facing an extrange behavior when trying to access System Information in an AS Java, every time we try to access the link the following error shows up:
Error - ID018236: Cannot instantiate bean. java.lang.ClassNotFoundException: com.sap.engine.monitor.infoapp.SystemInfo
the complete error shows:
Found in negative cache -
Loader Info -
ClassLoader name: sap.com/tc~monitoring~systeminfo Parent loader name: References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization library:tcjmx library:sapxmltoolkit library:tcSLUTIL Resources: /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/sap/monitoring/root/WEB-INF/classes /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/sap/monitoring/root/WEB-INF/lib/jstartupapi.jar /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/monitoring/root/WEB-INF/classes /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/monitoring/work /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/sap/monitoring/work /usr/sap/QBW/DVEBMGS03/j2ee/cluster/server0/apps/sap.com/tcmonitoring~systeminfo/servlet_jsp/sap/monitoring/root/WEB-INF/lib/jstartupimpl.jar Loading model: {parent,references,local} -
Any idea about what is happening is appreciated.

check with this links too
http://hostname:port/sap/monitoring/SystemInfo
http://hostname:port/monitoring/SystemInfo
Implementing this note should solve your problem
Note 1281251 - System information exception: Connection is invalid
and also check
Note 1233282 - Fixed URL of System Information application on Start page
Thanks,
Surendra

No System Information in Service Desk message creation

Hello,
I'm trying out all the ways to use de message creation in service desk.
When i try to create a message directly from SOLMAN_WORKCENTER\Incident Management
No infos are filled in System Information and so i can't send the message. I can't even choose one
I checked in transaction BP but i can't put the finger on it..
Thanks in advance for your help

Hello,
Please check in IB52 if there is an Ibase with external ID SOL_MAN_DATA_REP.
Best regards,
Miguel Ariñ

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

USB MIDI controller no longer recognized by mac (not even in System Information).

Hello!
I have an M-Audio Keystation 49e that I have been using with my MBP (early 2008 model) for a few years with absolutely zero problems ever. I recently bought a very generic Chinese MIDI interface ("Sanoxy" brand) to go between my full-size Yamaha and mac so that performances of parts into logic would be on weighted keys and such.
For a while I used both the MIDI interface with the Yamaha and the little 49-key MIDI controller (via USB and also powered by the USB) with no problems. I believe this problem occurred when I tried to use both the MIDI interface and MIDI controller on one USB port using a Targus external number pad (unpowered) that has two USB ports on it (bad idea I'm sure). I did this because my MBP only has two USB ports on it and I was using the other for my audio interface.
I have reset PRAM more than a couple times, reset SMC, cleaned caches (even though this could be done more thouroughly maybe with a recommended program besides Cocktail - trial is expired), even replaced AppleMIDIUSBDriver.plugin from my parents iMac which the MIDI controller still works on. All this and nothing. The keyboard is not recognized as even being plugged into the USB port on System Information even though the lights are on, much less AMS.
Any other information you need I'd be happy to let you know.
Super thanks!
Cody

Bumpitty bump bump

App size in system information not the same as app size in finder. What's causing this or which is right?

As you can see from the image above, finder is showing that apps are taking up nearly 30 GB, nearly 25 GB less than system information. What is causing this or which one is the actual size of the apps. It's not as if I'm runing out of space , I'm just a bit curious.

Now Carolyn, hopefully It'll work now!

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Monitoring Cisco UCS Manager via HP System Information Manager 7.1 (SIM)

I am working with a customer to configure HP System Information Manager 7.1 (SIM) to monitor their Cisco UCS Manager.
The customer is looking to monitor the following:
- CPU Utilization on manager, blades, servers, etc...
- Memory utilization
- Network utilization
- System inventory
Alerting is needed for the following:
- Hardware failures: memory, power supply, drive, etc...
- Predictive failures
- Alert messages
I have the list of all the MIBs provided by Cisco but an having the following issues while loading them into HP SIM.
While loading MIB "CISCO-UNIFIED-COMPUTING-TC-MIB" I get the following error message:
Line 128: Error defining object: expected a label, found reserved symbol {
Line in MIB: SYNTAX Gauge32 {
Guage32 is imported from SNMPv2-SMI MIB
To get past this error I found a version of the MIB that removes all the textual conventions that where causing errors. I have attached the fixed MIB file to this discussion. With the fixed version of the MIB installed in SIM everything compiles and installs except the following two MIBS. CISCO-UNIFIED-COMPUTING-NOTIFS-MIBCISCO-UNIFIED-COMPUTING-CONFORM-MIB Questions:
1. Is there any way to get the CISCO-UNIFIED-COMPUTING-TC-MIB MIB to install correctly into HP SIM?
2. Is my MIB load order setup correctly?
3. Has anyone had success getting HP SIM to monitor and alert for Cisco UCS manager?
MIB Load Order:
SNMPv2-SMI
SNMPv2-TC
SNMP-FRAMEWORK-MIB
RFC1213-MIB
IF-MIB
CISCO-SMI
CISCO-ST-TC
ENTITY-MIB
INET-ADDRESS-MIB
CISCO-UNIFIED-COMPUTING-MIB
CISCO-UNIFIED-COMPUTING-TC-MIB
CISCO-UNIFIED-COMPUTING-FAULT-MIB
CISCO-UNIFIED-COMPUTING-NOTIFS-MIB
CISCO-UNIFIED-COMPUTING-AAA-MIB
CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB
CISCO-UNIFIED-COMPUTING-BIOS-MIB
CISCO-UNIFIED-COMPUTING-BMC-MIB
CISCO-UNIFIED-COMPUTING-CALLHOME-MIB
CISCO-UNIFIED-COMPUTING-CAPABILITY-MIB
CISCO-UNIFIED-COMPUTING-COMM-MIB
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB
CISCO-UNIFIED-COMPUTING-CONFORM-MIB
CISCO-UNIFIED-COMPUTING-DCX-MIB
CISCO-UNIFIED-COMPUTING-DHCP-MIB
CISCO-UNIFIED-COMPUTING-DIAG-MIB
CISCO-UNIFIED-COMPUTING-DPSEC-MIB
CISCO-UNIFIED-COMPUTING-EPQOS-MIB
CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
CISCO-UNIFIED-COMPUTING-ETHER-MIB
CISCO-UNIFIED-COMPUTING-EVENT-MIB
CISCO-UNIFIED-COMPUTING-EXTMGMT-MIB
CISCO-UNIFIED-COMPUTING-EXTVMM-MIB
CISCO-UNIFIED-COMPUTING-FABRIC-MIB
CISCO-UNIFIED-COMPUTING-FC-MIB
CISCO-UNIFIED-COMPUTING-FCPOOL-MIB
CISCO-UNIFIED-COMPUTING-FIRMWARE-MIB
CISCO-UNIFIED-COMPUTING-FLOWCTRL-MIB
CISCO-UNIFIED-COMPUTING-HOSTIMG-MIB
CISCO-UNIFIED-COMPUTING-IMGPROV-MIB
CISCO-UNIFIED-COMPUTING-IMGSEC-MIB
CISCO-UNIFIED-COMPUTING-IPPOOL-MIB
CISCO-UNIFIED-COMPUTING-IQNPOOL-MIB
CISCO-UNIFIED-COMPUTING-ISCSI-MIB
CISCO-UNIFIED-COMPUTING-LICENSE-MIB
CISCO-UNIFIED-COMPUTING-LLDP-MIB
CISCO-UNIFIED-COMPUTING-LSBOOT-MIB
CISCO-UNIFIED-COMPUTING-LSMAINT-MIB
CISCO-UNIFIED-COMPUTING-LS-MIB
CISCO-UNIFIED-COMPUTING-MACPOOL-MIB
CISCO-UNIFIED-COMPUTING-MAPPINGS-MIB
CISCO-UNIFIED-COMPUTING-MEMORY-MIB
CISCO-UNIFIED-COMPUTING-MGMT-MIB
CISCO-UNIFIED-COMPUTING-NETWORK-MIB
CISCO-UNIFIED-COMPUTING-NWCTRL-MIB
CISCO-UNIFIED-COMPUTING-ORG-MIB
CISCO-UNIFIED-COMPUTING-OS-MIB
CISCO-UNIFIED-COMPUTING-PCI-MIB
CISCO-UNIFIED-COMPUTING-PKI-MIB
CISCO-UNIFIED-COMPUTING-PORT-MIB
CISCO-UNIFIED-COMPUTING-POWER-MIB
CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB
CISCO-UNIFIED-COMPUTING-PROC-MIB
CISCO-UNIFIED-COMPUTING-QOSCLASS-MIB
CISCO-UNIFIED-COMPUTING-SOL-MIB
CISCO-UNIFIED-COMPUTING-STATS-MIB
CISCO-UNIFIED-COMPUTING-STORAGE-MIB
CISCO-UNIFIED-COMPUTING-SW-MIB
CISCO-UNIFIED-COMPUTING-SYSDEBUG-MIB
CISCO-UNIFIED-COMPUTING-SYSFILE-MIB
CISCO-UNIFIED-COMPUTING-TOP-MIB
CISCO-UNIFIED-COMPUTING-TRIG-MIB
CISCO-UNIFIED-COMPUTING-UUIDPOOL-MIB
CISCO-UNIFIED-COMPUTING-VM-MIB
CISCO-UNIFIED-COMPUTING-VNIC-MIB
References:
ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html#_Toc303691433
http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/simsnmp.pdf

Please post "debug ccsip messages".
Based on your debug you are getting "Cause No. 38 - network out of order."
You may want to bind SIP to an interface that the IP address is defined which Lync points to.
Chris

Can I embed C# Email code in .pdf file to send user and system information when it opens on system

I have a pdf on my system. When I opened it it should email the current user account and system information( like IP, Windows login Id). If the system does not have internet it should not show the error.
Is it possible? If so could you suggest a way or provide a link.
Due to security we want this feature.
Your help is appreciated.
Thanks

You could track the user's email login/IP address if you secure the file using DRM (LiveCycle, etc.), but a PDF which sends silent emails containing personal data about a user would be considered a trojan by the vast majority of people.

System Information Refresh

Hello, all
Q - Does the Air's "Refresh Information" for 3rd Party installations rely upon the latter's timely information refreshing? (An aside - Yes, I must update my Product Information!)
Adobe flash player's December version 11.9.900.170 automatically installed and operating correctly. Delay in Air's System Information Refreshing. I tried "Refresh Information", but this had no apparent effect. October Adobe version still listed.
Mid 2011 Air 10.8.5 32-Bit Chrome Default browser.
Many thanks

Hi Huang,
Can you check if the OSS Note below helps u remotely by any chance. It talks about a dump after an upgrade from 4.6 to ECC for this report...
Note 667876 - COOIS: Short dump when you select a variant
Rgds,
Sri
Award points if helpful

Creative System Information probl

Similar Messages

Maybe you are looking for