Creative Ultra for Notebook, white balance not working??

After years of use with my Creative Notebook Cam Pro I decided to upgrade and get the Ultra for Notebook because it's a CCD and works better in lower light conditions.
The drivers install fine however I cannot adjust the white balance nothing changes when I click apply. I have both 98SE and XP drivers installed and it appears that the bug is present in both sets of drivers.
This is a big disappointment because using this cam indoor with artificial lighting is next to being useless. Furthermore there's no saturation controls included in the drivers so I couldn't reduce the colour to b/w even if I wanted to.
As a product that's been on the market for nearly 2 years I'm surprised that no bug fixes have been issued for this problem I'm sure it's been mentioned before here?
Does anyone know if CLabs will fix the problem soon because as it stands this product isn't worthy of my time or money.
Richard S.

It should be directly underneath the image preview - press the T key if it's not there.

Similar Messages

White Balance not working

I'm using Aperture 3.2.2 and when I use the white balance 'pipette' tool to select neutral grey area no changes are applied. I think I know how this tool works as I have used it in the past. The image I am trying to adjust I also know needs adjusting as it was shot using bounced flash off an cream surface. Of course I can manually change the white balance using the temperature and tint sliders but have found better results in the past using the select neutral grey.
Anyone else having this issue and know of a fix?

Is it only on certain images that the white balance pipette tool does not work, or is it a general problem?
If it does not work on any images, delete the Aperture Preference files, as described in
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
for sometimes user interface elements do not work, when preference files are corrupted.
If only some images cannot be adjusted, then try the library "first aid": repairing permissions and library.
Regards
Léonie

VF0070 Driver crashes XP after hibernation (Webcam Ultra for Notebooks)

Hello,
I own a Creative Webcam Ultra for Notebooks, Model VF0070. I found an issue with Windows XP's hibernation.
Situation: the Webcam is plugged in to my computer before switching off the computer into hibernate state, then unplugged while off and unavailable during restart.
In this case, Windows crashes into a blue screen, quoting the Creative driver as the cause.
My system is:
Creative Webcam Ultra for Notebooks, Model VF0070
Webcam driver V.0.5.27
Dell Latitude X (Intel Centrino chip set)
Windows XP
Skype as webcam application
Did anybody experience similar effects? Is there a workaround or a fix?
My current workaround is unplugging the webcam before hibernation. Or alternatively, taking care that I plug in the webcam _before_ waking up the computer from hibernation. But every once in a while I forget and XP crashes again.
Thanks for any help,
Bernhard

never mind i've sold my creative webcam pro ex to another idiot and going to buy a new one today, i looked at mediamarkt and saw some other creative (pro) webcams sold at almost the same price as my previous Creative Pro eX, however knowing how Creative thinks about updating drivers and misleading people saying the product is working with Windows XP when it does not, i will never ever in my entire life buy a product from Creative anymore..
think it's kinda stupid to say "hey my software is compatible with XP" when it's not and when it hassen't been updated for quite some time, do you live in 2005. you know XP has updated to SP2? right...
this expensive webcam has worked 7 months for me and now? it just keeps crashing my laptop saturating my USB, conflicting with [usbuhci] and then give a moran BSOD which i haven;t seen since windows ME :-s
the latest drivers for this webcam arren't signed and they do not work with Windows XP Professional SP2 so anyone who's planning to buy this webcam today, please buy it somewhere that has a return policy because this webcam was the best but now has become cripple.
one thing more, if you people at Creative are to busy with making money with products and don;t have time to develop working drivers then maybe consider giving out the source code so that serious developers are able to create working drivers for people that don't want to buy you're webcam every 7 months not because the webcam is broken, but because you where too lazy and money hungry just want to push people into buying yet another one of these webcams.
oh well not my problem anymore you will see someday the consumer strikes back and then you will be left with a magazine full of hardware nobody wants to buy cause the compagny doesn't provide updates on their own drivers and software..
--i'm out of this mess--
Message Edited by spablauw on 04-01-2005 03:36 PM

HP Pavilion g6 Notebook PC - Keyboard not working

HP Pavilion g6 Notebook PC - Keyboard not working
My Windows 8 - 64 bit laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work. Is it dead? what is the solution. Please help
Thank you

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Note: If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

RV042 Load Balancing not working correctly?

We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
WAN1 = Telepacific T1
1.5Mbps down and 1.5Mbps up
WAN2 = AT&T U-Verse
12Mbps down and 5Mbps up
I have it set to Load Balance, Primary WAN = WAN2
Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
Bandwidth is set to:
WAN1 = 1000Kbps upstream & downstream
WAN2 = 5040Kbps upstream & 12000Kbps downstream
It seems to pick WAN1 a lot of the time. Do I have something setup wrong?

Ok, so what do you recommend? To setup binding for ports important to direct over say… WAN1 (my fast access) shall I also keep the bandwidth management set up as is, example:
For me it’s confusing because this config appears to be clear to me that has to control traffic the way I want .
Thanks for your response.
H Aragon
De: jasbryan
Enviado el: lunes, 20 de febrero de 2012 03:18 p.m.
Para: HECTOR MANUEL ARAGON
Asunto: - Re: RV042 Load Balancing not working correctly?
Home
Re: RV042 Load Balancing not working correctly?
created by jasbryan in Small Business Routers - View the full discussion

Lightroom D100 custom white balance not read

I have a D100 converted to IR use. I shoot with a custom white balance set off green grass. If I open an image in Raw Shooter or Capture I get the balance I expect. In Lightroom it opens as what looks like an unbalanced "pink" IR shot. Manually adjusting the white balance in LR I can't get my normal results - may be related to the fact that the red channel looks completely clipped at the high end which I don't see in RSP.
The D100 is meant to be supported for reading white balances.
Any suggestions ?
Andrew
ps: I thought I posted this a few days ago but after a couple of days with no response couldn't find it myself so if it is lurking somewhere, apologies !

Suggestion for a workaround:
It seems that you want to work with a specific WB value you know.
Just create a preset with a fixed WB value which you apply by importing your IR shots. Then you don't even have to set it in the camera.
Besides this with my D70 I get the WB valance values from the camera without probs. I have however no experience with the D100
regards
Chris

Simple questions about the Live! Ultra for Notebooks webcam

Hi there,
I don't have a notebook, but I have an LCD display and I'm thinking of getting a webcam. Does anyone know if the Live! Ultra for Notebooks can be clipped on something as thick as 3cm?
Also, does it have an in-built microphone, or is that all in the headset?
Thanks in advance.
Charlie

Charlie,
The clip of the webcam can be stretch to approximately about .5cm only. Also, the microphone is not inbuilt into the webcam. It's on another seperate headset.
Jason

Can't turn off face tracking on Live! Ultra for Notebooks

Please help! I've installed Live! Ultra for Notebooks and it works reasonably well, except for the fact that I can't turn off the Face Tracking feature.
When I installed everything, I selected "Smart", but I hate the way that the camera keeps panning off to different parts of the room. So, I just want to turn this feature OFF.
But every time I open the Face Tracking Utility, or go to the screen via "Tools," I can click "off". But, it doesn't actually turn off; the camera still keeps panning off to the far corners of the room. And the next time I access the Face Tracking Utility again, it has defaulted back to "Smart". Any suggestions on how to disable this feature?
My system is as follows:
Dell Inspiron 700M
Intel Pentium M 2.00 GHz processor
Windows XP Home Edition, service pack 2
Happy new year & thanks in advance..

Finally figured it out. In case anyone else has the same problem of your computer ignoring changes in the Face Tracking Utility screen, try this:
Go to Webcam Center. Click on "Capture" then the "Source" tab, one of two discrete grey tabs just above the video screen.
Under "Extended Settings" you have the options for face tracking: off, continuous or smart. Click it and your computer should actually hold onto this setting until you change it again!
Good luck.
-noknok

HP Pavilion 15-e092se Notebook PC keyboard not working

HP Pavilion 15-e092se Notebook PC keyboard not working . win 8.1.

Hi Nits007,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-e092se Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My pavillion g6 notebook fan is not working how do i fix it?

My pavillion g6 notebook fan is not working how do i fix it?
i found out a few days ago when i was not hearing the sound my fan usually does because its really loud
and then 1 day i got the message. and is there a way to make it quiet?

Hey FlowZ,
Here is the Manual that shows you how to remove all the replaceable part in the notebook. Go to page 73 where it tells you the part #'s for the fans depending on what your processor is.
Now, i wouldn't advise you to remove it yourself.
But these are the steps to remove the Fan.
1. Turn the system board right-side up, with the front toward you.
2. Disconnect the fan cable from the system board (1).
3. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system
board.
4. Follow the sequence embossed on heat sink to loosen the six Phillips 10.0 x 2.0 captive screws
(3) that secure the fan/heat sink assembly to the system board.
If you want to replace the fan just go to Hp PartSurfer and search by your product #.
Here is a Document that will help you with Reducing Heat inside the PC.
Also,Reducing Fan Noise.
THX

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Creative Ultra for Notebook, white balance not working??

Similar Messages

Maybe you are looking for