Creative WebCam Vista Plus Installation Problem..

Hi,
I've got a big problem when i'm trying to install the software for my webcam.. when i put in the software CD and appears the install menu i click on "continue" to start the installation.. but then there is this strange problem ( i've no idea what it is cause im kinda computer noob xD ) something like a "problemreport" sorry for this word i'm from germany and can't translate it well^^
There is written that DemoShield Player detected a problem and has to quit. So i can't continue with the installation.
Does anybody know how to fix this problem?
I have Windows XP Home Edition.. please ask me if i forgot something, it's the first time for me that i use such a forum to ask other people for help xD so don't get angry if there's something missing in my question :P

Sephiroth,
Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
Jason

Similar Messages

  • Creative WebCam Vista Plus on USB PCI Card (VIA VT 6212) on Windows ME - doesnt work !!

    PC turns off when the Vista Plus WebCam is connected to the USB port on my USB PCI Card
    I use a primitive Intel Celeron 300Mhz processor with 64MB RAM on an Intel 440BX-AT Chipset running on Window ME. I recently installed a USB PCI Card (based on the VIA VT 622 chipset) which is a 394/USB 2.0 Combo. The problem is my 'Creative WebCam Vista Plus' doesnt work with it.
    After I had installed the drivers on the 'Creative WebCam Vista Plus' CD - that is - without connecting the webcam to my USB PCI card the installation asks me to connect the webcam to the USB port and When I do that the PC just GOES OFF !
    It starts up only in SAFE MODE and each time I've got to restore my PC.
    How do I get the WebCam connected to my PC ?
    Thanks in advance
    Message Edited by Prabhats on 01-19-2007 08:34 AM

    9hours later and Ive given up. I cant get the Vista 64 Ultimate to work with the Audigy 2Nx usb sound card. Im very angry and very frustrated (not to mention very tired from the 2 late nights Ive spent trying to work it out). Im not a PC-noob, but am only 4days into my Vista ownership................... Im guessing now, after much research, that there will never be a driver that gets these units to work with Vista 64bit. thats pretty weak Creative. However, I dont want to use crappy onboard sound for my gaming.What is the suggestion?Should I be looking at returning this unit, and buying either the X-Fi Xtremegamer?Fatality Pro as?a highend device, or the X-Fi Xtremegamer for $00 less? Or should I be looking at another manufacturer. Would either of these x-fi gamers work with Vista 64bit Ultimate?suggestions please?

  • Creative WebCam Vista Plus - need Driver for Vis

    Hi,
    I've a problem with my WebCam. I've bougth the Creative WebCam Vista Plus and everything working fine, using WinXP.
    Now I bougth a new PC with Vista Business 64bit. I plugged in the WebCam and wondered, that the Vista drivers are not allready on bord. So I tryed to download the driver from the Creative Support Site. There I got only the answer, that there is no download available for my product... !!
    By the time I bought the Cam i thougth, that I am buying a future-proof product. I mean, even the name of the cam includes the word VISTA! Isn't that crazy
    Does everone know a possibility to get the Cam working I'm realy upset about the driver-policy from Creative.
    Another thing is, to find the german website. Why i cant usw www.creative.de I had to google the adress... http://de.europe.creative.com/welcome.asp

    Sephiroth,
    Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
    Jason

  • Creative WebCam Vista Plus has a built-in microphone?

    Hello, I am having problems with audio, but before trying anything, I just want to know if the I searched in products info, no answer there.
    Thank you.

    No. If you are refering to the model number : VF0090

  • Big problem with webcam vista plus need HELP !!

    Hello Everyone !
    I own Creative WebCam Vista Plus VF0090.
    My system is windows 7 64 bit and i cant install any driver for my cam to work.
    Please help... thanks.

    Hi Itay84,
    Sorry but I don't think there is driver for your webcam. Please refer to the driver availability chart for updates.

  • Webcam Vista Plus - Webcam Centre unable to flip images

    I just got a Webcam Vista Plus yesterday. After faultless installation, I noticed that the software itself does not have the option to flip streaming images vertically and horizontally !
    I noticed that similar software for other creative webcam has this built in functions. My previous budget logitech webcam came with its software with similar function too.
    So I wonder if there can be a patch to allow image flipping to happen.
    I use this cam mainly for realtime surveillence on my computer during work, but needs to be installed upside down on the ceiling.
    I appreciate some feedback.

    I too am experiencing the same difficulty with a PD00 web cam. My camera was to be mounted from the ceiling, and this functionality would be helpful.

  • Driver Creative Webcam Vista (vf0330) was expire???????

    I want to driver creative webcam vista(vf0330) for windows 7 version 64 bit but webcreativeglobal are not

    Please check my reply on your other post.

  • Creative WebCam Vista Problem !

    Hi! I just bought my Creative WebCam Vista3 weeks ago and it was working just fine ..Until a week ago, Now it shows something like this ... http://img00.imageshack.us/img00/6205/623698gj0.jpgCan anyone please tell me what to do?I have to record something really important,It's for a school project ... and the deadline is next week. Thank you!

    more info:
    I'm using Windows XPand the webcam is already plug-in but it kept on showing the same thing :womansad: WEBCAM VISTA:http://www.creative.com/products/pro...9&product=5969
    Message Edited by soul987 on 06-16-2007 10:33 AM

  • Creative Webcam Vista

    Anscheinend ist hier alles in Englisch huh? Naja versuch ich mich mal in der sprache
    i see it'ss all in english Language huh? ok i?m try in this Language.... *rolleye*
    :angry:
    So i got a problem with my creative !!!Vista!!! Webcam, Not vista Plus!!
    I send an e-mail to the supporter with unanswered return. You have to accept im very very angry about that!! For sure.
    I need the software (not driver) for this webcam. And i can't find someone. My cd goes broken by my daughter. and i dont have the pakage anymore.
    So my QUestion:
    Have anyone on this board an GOING Link for the software or can send a cd to me?!
    I need help. what is that for an service if an cd goes broken and you dont get an new anymore.... ohh i hate that so much!! :angry:
    Thanks for first time.

    No. If you are refering to the model number : VF0090

  • Creative Live Vista IM (VF0420) Problem, PLEASE HELP!

    Hi
    I use Freetrack to play Airplane Combat Simulators, it's a program that uses the WebCam and a hat with 3 LED to simulate the head movement inside the cockpit.
    I'm using Creative Live Vista IM (VF0420) installed the CD drivers and it works perfectly with the Freetrack and all the other programs.
    Recently i've bought a Joystick (Saitek Aviator), so I installed the drivers on the CD plugged in the Joystick and it was also working perfectly.
    The problem is that now the camera it's not working and the only way to get the camera working is to unplug the Joystick and restart the computer.
    After the restart I tested the camera and it was working ok, but again, just after I plug in the Joystick the camera freezes the image and stops working until the next restart with the joystick disconnected.
    Resuming, this camera only works when the joystick is disconnected since the computer restart. LOL
    I'm using Windows XP 32 Bit + SP2
    I tested with other webcam (also Creative) and had no problems working with Freetrack and no conflicts with the Joystick.
    I see no conflicts on the Device Manager.
    Anyone with the same problem or with the solution please reply.
    Thank's in advance.

    buddhika wrote:
    Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
    I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
    I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
    then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
    I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
    I have questined creative support but no answer.
    Please help me !!
    If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
    Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
    Disable the Creative CD-ROM detector (service).
    jutapa

  • Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

    Hi I wondered if you could help me.
    Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
    I'm also running
    McAfee Internet Security 7
    Spybot
    Ad-aware
    Spywareguard
    A-squared
    Spywareblaster
    Ive also tried running defrag and scandisk to no avail.
    Thanks.

    Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

  • Creative Livecam Vista IM - software problem (WebCam Center)

    Hello,
    I've just had my camera installed with all the software included. There's one problem - every time I open the WebCam Center, the program tries to install something called "Photo Gallery". However, it's impossible to install that, because some errors occur (2908).
    The only way to get the WebCam Center work is to cancel the installation, which is possible only just after the WebCam center launches.
    How can I get rid off this "Photo gallery" installation thing?
    Greetings!
    Piotrek
    Message Edited by snowdawg on 12-25-2007 05:32 AM

    Sephiroth,
    Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
    Jason

  • Creative webcam dell studio 17 problems with creative zen

    hi there, ive got a dell studio 17 with a built in webcam.
    When i try to install the drivers for the creative zen, and put the disk in, a message comes up saying 'we could not find the driver software for your device'
    then windows trys to solve the problem and comes up with a message saying 'this problem was caused by a compatibility issue between this version of windows and yor webcam which was made by creative' 'go online to download and install the update for your webcam'
    however i try the website they gave me, which is the creative support page, but i cant find a built in webcam for the dell studio 17
    i was just wondering whether the answer is right in front of my eyes, or if anyone else had this problem

    Hello MichelleStudio!
    The only thing that comes to mind to help you out here is to try to visit Dell's support website and update your hardware drivers and/or firmware.  To get to your model's specific downloads click on "Drivers & Downloads" and choose the Service Tag option.  It asks you for your Service Tag which is on the bottom of your laptop.  Then it will bring you to a list of available downloads.
    Make sure the operating system is set to Windows Vista 64-bit, as this is what your laptop came with.  The important ones to update are BIOS and Chipset.  But since I don't know specifically what is causing your problem, it's kind of a guessing game.
    This is assuming you can get your laptop to boot up long enough to perform these updates.  You said that the error said something about a driver, so hopefully updating your hardware drivers and firmware help.
    Hope this helps, thank you for posting!
    Jacob|Web Planner | Best Buy® Corporate

  • Creative Zen Nano Plus Firmware Problem, AGAIN! (PeeBee HEL

    Hi all,
    I am new here and have read all the posts and FAQ's but couldn't solve my problem. Actually there is a post http://forums.creative.com/creativel...d=68923#M07024 which tells exactly my problem. Have tried the solution but didn't solve it.
    So I am here asking again.
    I bought a zen nano plus GB and downloaded the latest firmware(ZenNanoPlus_PCFW_LF__0_03.exe) and the latest mass storage driver (MStorage_PCDRV_LB__07_00_250.exe). When I put the player in recovery mode as the firmware is detecting devices the player takes it self out of recovery mode and back in mass storage mode how do i stop it from down that?
    I am trying to update it because my player doesn't play wma files :angry:I have tried PeeBee's solution but it didn't work. I have taken the battery out, reconnected it and it is recognized in recovery mode. I run the firmware and the computer plays a sound, the icon of connection appears in the nano's lcd and it is out of recovery mode. Then firmware program tells me that the 'device state is not set' and after that the message 'put into recovery mode before updating firmware' Aaaaaarrrrrghhhh!
    I'm also running windows XP SP2
    Can anyone help me?
    Thank you in advance
    Marcelo Lopes
    Rio de Janeiro - Brazil

    Hello-
    I had a similar situation develop. Did your error message say, "Media state not initialized?" Here is what the creative support site says:
    If you receive a message "Media State is not initialized ..." while updating firmware for a MuVo or Zen Nano Plus player, it will be necessary to install the Player Recovery Device driver and then update the firmware.
    . Download the latest driver if you have not done so. You can download it from http://us.creative.com/support/downloads, and file name is MStorage_PCDRV_LB__07_00_250.exe.
    2. Install the latest driver by double clicking on the file name.
    3. Unplug the player from a computer if it is plugged.
    4. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
    5. Press and hold the Play button while connecting the player to the USB port.
    6. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
    7. Keep on holding the Play button till Windows displays the Find New Hardware dialog box.
    8. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
    9. Double click on the latest firmware upgrade file that you have downloaded previously, and follow the instructions on the screen.
    0. Format the player if you are prompted to do so.
    It is recommended that you stop your player properly before physically disconnect it from your PC.
    To stop your player in Windows XP, Windows 2000 or Windows ME
    Click on the Safely Remove Hardware icon on the Taskbar, click Safely remove USB mass Storage device, and disconnect your play when you are prompted to do so.
    To stop your player in Windows 98SE
    Make sure that the icon below appears on the LCD screen again for at least fi've seconds before disconnecting your player.
    Now, I did all of the above and still got the error. What solved the problem finally was to connect (using the above method - remove the battery - hold the switch, etc) to a DIFFERENT USB port. Then all worked well, and the firmware transferred. Don't ask me how or why.
    Good luck.

  • Can't Install iTunes 10.6.3 Windows Vista Windows Installer Problem

    Basically, just before installation completes a popup of "There is a problem with this Windows InstWhat exactly would I be missing??? please help !aller package. A program required for this install to complete could not be run.".  I've read many threads that state that all I have to do is run a repair on the Apple Software Update(ASU) but my problem is that I've already uninstalled it. Now what comes to my mind is that, it wasn't a clean uninstall as I just uninstalled through Add & Remove.
    So I would preferably like to get an answer to the whole problem or if not what files are linked to the ASU that might cause this problem. Please help I've alot of things and I really hope there is another solution then to reformat my PC, I really don't wanna reformat my laptop just for iTunes and because I have an iPhone, I unfortunately, have to depend on having it installed.
    Back story (Why I do not have ASU):
    When I updated my iTunes and several other Apple software, I was unable to start itunes, kept getting a permissions issue. So I set all the permissions to my User Account (note that I am, from the start, using an admin account) but still errors kept popping up. Usually when an update doesn't work I just go through Add & Remove and uninstall all Apple programs before trying to reinstall iTunes and etc, which I did, Except this time...

    Download and save a full itunessetup.exe or itunessetup64.exe file(depends on your operating system).
    http://www.apple.com/itunes/download/
    Use Winrar to unzip the file into a folder. Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
    If you don't have winrar, you can go to this link to download a free trial version.
    http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

Maybe you are looking for