Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

Hi I wondered if you could help me.
Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
I'm also running
McAfee Internet Security 7
Spybot
Ad-aware
Spywareguard
A-squared
Spywareblaster
Ive also tried running defrag and scandisk to no avail.
Thanks.

Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

Similar Messages

Creative WebCam Vista Plus on USB PCI Card (VIA VT 6212) on Windows ME - doesnt work !!

PC turns off when the Vista Plus WebCam is connected to the USB port on my USB PCI Card
I use a primitive Intel Celeron 300Mhz processor with 64MB RAM on an Intel 440BX-AT Chipset running on Window ME. I recently installed a USB PCI Card (based on the VIA VT 622 chipset) which is a 394/USB 2.0 Combo. The problem is my 'Creative WebCam Vista Plus' doesnt work with it.
After I had installed the drivers on the 'Creative WebCam Vista Plus' CD - that is - without connecting the webcam to my USB PCI card the installation asks me to connect the webcam to the USB port and When I do that the PC just GOES OFF !
It starts up only in SAFE MODE and each time I've got to restore my PC.
How do I get the WebCam connected to my PC ?
Thanks in advance
Message Edited by Prabhats on 01-19-2007 08:34 AM

9hours later and Ive given up. I cant get the Vista 64 Ultimate to work with the Audigy 2Nx usb sound card. Im very angry and very frustrated (not to mention very tired from the 2 late nights Ive spent trying to work it out). Im not a PC-noob, but am only 4days into my Vista ownership................... Im guessing now, after much research, that there will never be a driver that gets these units to work with Vista 64bit. thats pretty weak Creative. However, I dont want to use crappy onboard sound for my gaming.What is the suggestion?Should I be looking at returning this unit, and buying either the X-Fi Xtremegamer?Fatality Pro as?a highend device, or the X-Fi Xtremegamer for $00 less? Or should I be looking at another manufacturer. Would either of these x-fi gamers work with Vista 64bit Ultimate?suggestions please?

Driver Creative Webcam Vista (vf0330) was expire???????

I want to driver creative webcam vista(vf0330) for windows 7 version 64 bit but webcreativeglobal are not

Please check my reply on your other post.

Creative WebCam Vista Plus - need Driver for Vis

Hi,
I've a problem with my WebCam. I've bougth the Creative WebCam Vista Plus and everything working fine, using WinXP.
Now I bougth a new PC with Vista Business 64bit. I plugged in the WebCam and wondered, that the Vista drivers are not allready on bord. So I tryed to download the driver from the Creative Support Site. There I got only the answer, that there is no download available for my product... !!
By the time I bought the Cam i thougth, that I am buying a future-proof product. I mean, even the name of the cam includes the word VISTA! Isn't that crazy
Does everone know a possibility to get the Cam working I'm realy upset about the driver-policy from Creative.
Another thing is, to find the german website. Why i cant usw www.creative.de I had to google the adress... http://de.europe.creative.com/welcome.asp

Sephiroth,
Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
Jason

Epson LX-300, Epson FX-890 printers in Windows Server 2008 x 64 and Windows 7 (x32 and x64)

I have the following problema working with RDP connections to Windows 2008 Server (x64) SP2 and Windows 7 Professional (x32 & x64).
I have setup correctly an Epson LX-300, LX-300+, LX-300+II and FX-890 printers in separate computers in Windows 7 (all working under Windows 7 Professional x64 and x32) and they work correctly.
I need to RDP to a Windows 2008 Server SP 2(x64) and once I log in, the Server Operating System recognizes my printer with no problem at all (Redirected Printer), but when I print, the characters and not understandable, since the printed information is blurry.
When I do excatly the same procedure but with a Client with Windows XP installed the printed information is totally clear, so we can determine at least that the printers are working fine.
I understand this should be a driver issue, but i simply can't make it work correctly.
Can anybody help.

Hi,
Since the printer can print the test page, there is no need to collect the Event log. I notice there is no specify driver for Windows 7 and Windows Server 2008. It seems the default Easy Printer driver doesn’t work properly for these printers.
I suggest you install the Windows Vista driver version on the Server for testing.
LX-300 Impact Printer
LX-300+ Impact Printer
LX-300+ II Impact Printer
If the issue persists, let’s disable Easy Printer for a test.
Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection ->
Disabled
Also test the following KB.
http://support.microsoft.com/kb/959442/en-us
Niki Han
TechNet Community Support

Windows Server Essentials Storage Service and Windows Server Essentials Email Service eating memory

Hi
I have Windows Server 2012 R2 with Essentials Role installed. I have integrated server with Azure AD, Office 365 and Intune using the Essentials Dashboard integration tools.
I can see that Windows Server Essentials Storage Service and Windows Server Essentials Email Service are eating much of server memory. What are these services for and why they use a lot of memory? Specially I am wondering about the Email Service. What is
it for? Server dont handle email in any way so what is this service for? I tried to google it but found nothing.

Hi
I have 6GB of memory.
When I check from Resource Monitor, for Essentials Storage Service, Commit Set is 4G and Working Set is 1,8G.
Email Service Commit is about 1,8G and Working Set is just below 1G.
So these two services are reserving almost all the memory.
Memory is about 85-90% in use all the time, whether it be night or day.
Server have about 12 users and at the office there is about 2-6 person at the time. Link between server and office is 100M. There are no other services installed but the basic ones. We use server for AD (O365 integration) and file shares. Traffic in File
Shares are not big. They are more kind of an warehouse that in busy day-to-day use.
This server is about couple of months old and it has been like this since it was fired up.
I dont know what to look for from Event Logs and Process Monitor dont give me anything useful.

Creative WebCam Vista Problem !

Hi! I just bought my Creative WebCam Vista3 weeks ago and it was working just fine ..Until a week ago, Now it shows something like this ... http://img00.imageshack.us/img00/6205/623698gj0.jpgCan anyone please tell me what to do?I have to record something really important,It's for a school project ... and the deadline is next week. Thank you!

more info:
I'm using Windows XPand the webcam is already plug-in but it kept on showing the same thing :womansad: WEBCAM VISTA:http://www.creative.com/products/pro...9&product=5969
Message Edited by soul987 on 06-16-2007 10:33 AM

Issue connecting to Vista peer from OS X, XP and Windows 7

Hi, I've got the following problem.
Got a bunch of OS X, XP, Vista and Windows 7 machines sitting on standard NetGear LAN. The router has a static IP and is running NAT for the clients. There is a firewall to Internet (Firebrick).
There are no problems connecting between the OS X, XP, Windows 7 machines. However, you cannot connect to the Vista peers, except in some special cases.
To simplify I'm using the standard file sharing example. Calling the following method:
private function connectReceiveStreamToPeer(e:Event):void
recieveStream = new NetStream(netConnection,txtFarID.text);
recieveStream.client = this;
recieveStream.addEventListener(NetStatusEvent.NET_STATUS, receiveStreamHandler);
recieveStream.play("file");
where txtFarID.text represents a Vista peer, never results in the receive stream becoming connected to the Vista peer's sendStream...
However, there is a connection. If the Vista peer first connects its receiveStream to the sendStream of the OS X, XP or Windows 7 peer, then the OS X, XP or Windows 7 peer is thereafter able to connect its receiveStream to the sendStream of the Vista peer.
I've tested this on a couple of Vista laptops. Both are completely standard and don't have any special security software installed.
Any ideas?
Best, Dominic

this is most likely a local firewall issue on the the Vista computer combined with your NAT not doing hairpinning. please see Matthew Kaufman's detailed treatment of the NAT/firewall issue at
http://forums.adobe.com/message/1064983#1064983

Windows 8.1 something happened and windows 8.1 Pro couldn't be installed.

After the release of windows 8.1 preview I attempted the installation of 8.1 preview which failed. I decided it wasn't worth the bother until it was officially released so I left it uninstalled.
After the official release of 8.1 yesterday I opened the store on my windows 8 PC and I was presented with the Windows 8.1 download. I selected this and attempted to install. this failed with the message "Something happened and Windows 8.1 Preview
failed to install" Whoops!
I clearly hadn't done my windows updates to update the store so I ran these updates and in my windows store was the Official windows 8.1 download.
Once downloaded it then fails saying "Something happened and windows 8.1 Pro couldn't be installed Please try again Error Code 0x80070003"
now im stuck with that. is there a way I can clear the downloaded files and have the store re-download them? where are the stores downloads kept?
im really stuck with this one....

Hi,
This error code means that the specified path couldn't be found.
To fix this issue, I suggest we try following steps and try to reinstall again:
Step 1: Clean update temp files:
1. Press Windows key + R, type service.msc and press enter.
2. Stop Windows update service.
3. Run following command lines one by one to clear update temp files:
cd %windir%
ren SoftwareDistribution SDTemp
exit
4. Restart Windows update service.
Step 2: Clear windows store catch:
Press the Windows + R keys on your keyboard to open the Run dialog.
Type WSReset.exe, and click/tap on OK.
The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
Then, please try to update Windows 8.1 again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 something happened and windows 8.1 couldn't be installed.

After the release of windows 8.1 preview I attempted the installation of 8.1 preview which failed. I decided it wasn't worth the bother until it was officially released so I left it uninstalled.
After the official release of 8.1 yesterday I opened the store on my windows 8 PC and I was presented with the Windows 8.1 download. I selected this and attempted to install. this failed with the message "Something happened and Windows 8.1 Preview
failed to install" Whoops!
I clearly hadn't done my windows updates to update the store so I ran these updates and in my windows store was the Official windows 8.1 download.
Once downloaded it then fails saying "Something happened and windows 8.1 Pro couldn't be installed Please try again Error Code 0x80070003"
now im stuck with that. is there a way I can clear the downloaded files and have the store re-download them? where are the stores downloads kept?
im really stuck with this one....

so after digging a little more in the C:\$windows.~BT folder here is the setup log
It appears that the error happens because it cannot find a "STUDYID" not sure what this is though?
2013-10-18 17:57:23, Info MOUPG ESD Product Name [ Microsoft� Windows� Operating System ]
2013-10-18 17:57:23, Info MOUPG ESD Version [ 6.3.9600 (16408.0) ]
2013-10-18 17:57:23, Info MOUPG ESD Architecture [ x64 ]
2013-10-18 17:57:23, Info MOUPG ESD Edition [ Professional ]
2013-10-18 17:57:23, Info MOUPG ESD Language [ en-US ]
2013-10-18 17:57:23, Info MOUPG SetupManager: Loading C:\$Windows.~BT\Sources\SetupCore.dll
2013-10-18 17:57:23, Info MOUPG SetupManager: Loaded Setup object successfully.
2013-10-18 17:57:23, Info MOUPG SetupCore::Initialize
2013-10-18 17:57:23, Info MOUPG SetupCore::RegisterSetupTransforms
2013-10-18 17:57:23, Info MOUPG Registered DYNAMIC UPDATE transform
2013-10-18 17:57:23, Info MOUPG Registered DRIVER INFO DU transform
2013-10-18 17:57:23, Info MOUPG Registered COMPAT_SYSREQ transform
2013-10-18 17:57:23, Info MOUPG Registered COMPAT_MIGCHOICE transform
2013-10-18 17:57:23, Info MOUPG Registered COMPAT_ACTIONABLE transform
2013-10-18 17:57:23, Info MOUPG Registered IMGAPPLY transform
2013-10-18 17:57:23, Info MOUPG Registered OCDRV_MIGRATE transform
2013-10-18 17:57:23, Info MOUPG Registered DATA_MIGRATE transform
2013-10-18 17:57:23, Info MOUPG Registered DIAGNOSTICS transform
2013-10-18 17:57:23, Info MOUPG Registered FINALIZE transform
2013-10-18 17:57:23, Info MOUPG DlpMgrInit: WorkingPath = [C:\$Windows.~BT\Sources\Panther], Disposition = [Open], Flags = [0x0], Diagnostics = [Yes], Registrar = [Yes]
2013-10-18 17:57:23, Info MOUPG SetupHost::Create inproc event reporter result: [0x0]
2013-10-18 17:57:23, Info MOUPG SetupNotify::Initialize
2013-10-18 17:57:23, Info MOUPG SetupHost::Execute
2013-10-18 17:57:23, Info MOUPG Setup StudyID was [not found]
2013-10-18 17:57:23, Info MOUPG A previous StudyID was [not restored]
2013-10-18 17:57:23, Error MOUPG CSetupHost::DeleteReminderActions(439): Result = 0x80070003
2013-10-18 17:57:23, Error MOUPG CSetupHost::Execute(181): Result = 0x80070003
2013-10-18 17:57:23, Info MOUPG ConX::MoSetup::Inbox::CWinSetupWindow::Uninitialize: Enter
2013-10-18 17:57:23, Info MOUPG ConX::MoSetup::Inbox::CWinSetupWindow::Uninitialize: Exit
2013-10-18 17:57:23, Info [0x090009] PANTHR CBlackboard::Close: c:\$windows.~bt\sources\panther\mosetupinfo.

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

Window 8 and Windows 8.1 Upgrade Information and Windows 8 Tips

Need a tip on "how-to" do something in Windows 8 then the below links might provide the information that you need.
Microsoft Windows 8 upgrade assistant and FAQs.
HP Windows 8 Upgrade - Important Information Before You Upgrade.
HP Windows 7 to Windows 8 conversion information for Notebooks.
Test my HP PC for Windows 8 Compatibility.
Windows 8 – Tutorial Index and Windows 8 Tips
Windows 8 Apps more Windows 8 Apps
Windows 8 System Requirements
Additionally, if you Google "Windows 8 tips", you will find many excellent articles posted on the internet.
Windows 8.1 upgrade suggestions:
There are some important steps to take prior to doing the upgrade. Review this MS posted document. Be sure to run the upgrade assistant.
Be sure that Windows 8 has all of the latest MS updates installed. There are prerequisite patches that are required.
Be sure that you have at least 40 GB of hard disk free space.
Back up your data to external media.
Make a Windows 8 recovery media to external media before doing the upgrade. I prefer to use a third party hard drive imaging program.
Temporarily disable the antivirus software.
You will need to reinstall your programs after the upgrade so make note of which ones are required.
Check the HP Support site for Window 8.1 updates for your particular PC. If you don't see any updates then your PC has not been tested/certified with Windows 8.1.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I've been running 64-bit Windows 8 Consumer Preview very nicely for several months and want to upgrade to 64-bit Windows Pro on my Pavilion a1440n. When I've tried to install from within the OS I get weird messages indicating that it can't be installed on a USB Flash drive (which I'm not trying to do). When I tried doing a clean install I got an odd message saying that certain installer files were missing and it would not complete. I called Microsoft customer support and the agent there thought my cpu would work because it wouldn't support Hyper-V, even though I understand that it optional. From running coreinfo.exe I can see that I have the PAE, NX, and SSE2 on the cpu enabled as meets requirements.
When I ran through th HP site I saw that this machine has not been tested. Is there any way of getting confirmation that Windows 8 Pro 64-bit will or won't run on my machine? The HP Product code for it is ER904AA#ABA.
Thanks!

HP 320-1030 WINDOWS 7 TOUCHSCREEN SOFTWARE AND WINDOWS 8 UPGRADE

Just purchased an hp 320-1030 touchscreen with windows 7 operating system. The advertisement was that you could upgrade to windows 8 for $15 and HP would refund the $15.00
When you read the upgrade information it states that HP Touchsmart applications are not compatible with Windows 8 and must be uninstalled before upgrade.
The Windows 7 touchscreen came with the following touchscreen applications:
HP Touchsmart 5.0
HP Touchsmart Music
HP Touchsmart Browser
HP Touchsmart Web Cam
Canvas
HP movie store powered by Roxio Now.
Is Windows 8 going to provide Replacement applications that will function as well ?
A Little help on staying with Windows 7 for an HP Windows 7 Touchscreen or upgrading for Windows 8.
If I knew about these limitiations I would have waited for a HP Windows 8 touchscreen.

Hello Shujan
I am happy to be able to link you to your HP TouchSmart 320-1030 Desktop PC Drivers and software here. You will find if you choose Windows 7 64-bit from the drop-down box and hit "NEXT" than scroll down you will see + Driver - Original and if you click on that you will find the drivers you are looking for.
I hope this resolves your issue and would like to thank you for posting on the HP Forums and have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I'm using Parallels 7 on an imac with Windows 7. Both OSX and Windows (and especially quicken on Windows) runs very slow. Is there a good way to fix this?

Since installing Parallels 7 and Windows 7 (to use Quicken), my imac and the virtual computer run very slow. Is there a good fix?

Start up while holding Command R and run Disk Utility, check the SMART status and repair your hard drive.

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

Similar Messages

Maybe you are looking for