Creative your vista drivers are a diaboli

yes thats right you have nothing to say about it other than to spit out **bleep**...
I hope to god no one buying to hardware and you go bankrupt.

Alright, that's enough of that. If you want to post on this forum, keep your posts constructi've and your language clean.
Cat

Similar Messages

Poll: Are you pleased your Vista Drivers and their current featur

So my question goes who here uses their Sound Card to do more such as decode Dolby Digital (any kind) for SPDIF IN/OUT or any other function that enables you to do more for your home entertainment system, that Vista currently doesn't support?
POLL:
Are you pleased with your Vista Drivers and their current features? (A respectable question)
Yes
or
No
Maybe we can have a Poll about the feelings of the community without it being blocked for "stirring up trouble", we have an opinion lets see what the community thinks.Message Edited by cyphin6 on 03-20-200705:06 PM
Message Edited by cyphin6 on 03-20-200705:07 PM

Why is it that people think they have all these "rights"? There is a difference between a "right" and a "privilege". It is painfully obvious that most people who say that have a "right" to do something don?t know what their rights are at all.
First and foremost, moderating a privately owned forum is not a violation of anyone's "rights". Before someone complains about their "right to free speech" being violated because of a forum moderator, you need to understand about the right to "free speech" in "America" (Actually you should say in the U.S. because Cuba is part of "America" as well and they don't have a constitutionally guaranteed "right to free speech" ) applies to CONGRESS and what CONGRESS can't do. Basically, it restricts the government, not private citizens and private forums.
And even though you may have the "right" to say something, it doesn't mean that anyone here has to listen to you...and that includes the moderators and forum owner. In other words, they can tell you to shut up by locking or deleting a topic. If you want to practice your ?right? beyond that, open your door and shout at the top of your lungs?and when the police show up, you can'tell them?all about your ?rights?
Message Edited by SGV on 03-20-200705:45 PM

HP L7780 C8192A SN MY87L850HF ID 19140 - Your WIN7x64 DRIVERS ARE BAD BAD BAD NETWORKIN

Had trouble with Win7x64 Laptop. Would not connect to newtwork printer assigned 192.168.1.104 using our router.
Other identical Win7x64 Laptop workedd fine, so did two WinXP machines.
Downloaded a complete 300mb full install and removed everything, rebooted and installed the new sofftware.
Still did not work. Tried everything, even turned off Norton36, even though the other laptop worked fine with 360.
Tried it on. Then wentt ovver aand tried the laptop Win7x64 and WinXP and they could print!
The WinXP could also print using the shared printer from the problem Laptop Win7x64 because it stilll used its own driver. Same with the other laptop Win7x64.
Then I tried adding the shared printer from the problem laptop that had the new HP software, it required a new driver I guess because the BAD BAD BAD driver was newer. Zip across it went and now THAT laptop does not work.
I am incredulous that HP would be so arrogant that they thiink their DRIVERS are so good that they do not need to know when they have failled!!! No email direct to HP and no Tech support because HPP is perfect. This problem started long ago. HP Drivers have always been a problem. They don't have a business if their drivers fail, they'r name will get worse than when Carly Firorino had so many lousy productts out therre nobody in the company knew which end was up!!!
They used to be a great company, wish they stilll were. Hope someone contacts me with a solution because I've got two Win7x64 Laptops that don't print AND I don't trust these drivers any more!!!!! BAD BAD BAD -Which one works for Win7x64???
Bug the way the give away is that when you try to print to a printer and select it properly, no document even lands in the document que, someting is screwedd up with the driver..

VISTA DRIVERS ARE APPALLING !.. MP3 SOUND "LISTLESS&quot

FIX THESE DRIVERS. MUSIC SOUNDS WORSE THEN ONBOARD SOUND!!?NO FEATURES OF THE AUDIGY 2 ARE EVEN WORKING !!
?Message Edited by BlueOnyx on 03-6-20070:50 PM

This solution has been posted by myself as well as a couple of other people.
There is a small problem in Vista where Creative's drivers drop the level of the bass and treble to sub zero db levels - use Vista's sound control panel applet and raise these to the level you desire and you'll find the sound is just as it should be.
I generally recommend setting them to 0db/0db for bass and treble if you're mostly playing music, and using your music applications equaliser to get a more "exact" sound.
If you're gaming mostly, use the control panel applet to set the bass and treble of choice.

Creative WebCam Vista Plus - need Driver for Vis

Hi,
I've a problem with my WebCam. I've bougth the Creative WebCam Vista Plus and everything working fine, using WinXP.
Now I bougth a new PC with Vista Business 64bit. I plugged in the WebCam and wondered, that the Vista drivers are not allready on bord. So I tryed to download the driver from the Creative Support Site. There I got only the answer, that there is no download available for my product... !!
By the time I bought the Cam i thougth, that I am buying a future-proof product. I mean, even the name of the cam includes the word VISTA! Isn't that crazy
Does everone know a possibility to get the Cam working I'm realy upset about the driver-policy from Creative.
Another thing is, to find the german website. Why i cant usw www.creative.de I had to google the adress... http://de.europe.creative.com/welcome.asp

Sephiroth,
Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
Jason

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

What about the vista drivers for the audigy seri

now that the xifi vista drivers are out, when can we expect the (non-beta) vista drivers for the audigy series?

Actually, you can use the X-Fi-Drivers for the A2ZS. Simply unpack the install-file (e.g. with WinRAR) and run the setup.exe in the "Drivers"-folder. The Audio-Console will be installed too, you'll find it in your "windows/system32"-folder by the name "CtPanel.exe". I use the x64-bit version of Windows Vista, so the AudioConsole for this version couldn't see the installed Audigy-driver for some reason. After I've copied the CtPanel.exe from "yourunpackedinstallfolder/Drivers/wdm/common/i386" to the System32-folder, the Console worked as it should.Because the Console has not the best variety of the options, I've also tried to install the creative-programms from my CD. I could install the "Speaker-Settings"-tool, and it works fine. But the Surround-Mixer seems not to work under Vista, mooving the sliders has no affects on the real volume. I hope, Creative will release the good-working Software-Suite for Windows Vista, I really don't want to argue with the Audio-Console.Message Edited by theLost on 03-08-2007:28 AM

Vista Drivers for Satellite A100-PSAA9

Hello everybody/Toshiba driver support,
Can i ask something, what is this ? Toshiba advises Windows Vista but comes with no drivers ?
Maby this is a double post but when do all the drivers come out ?
Well first i thought ok Vista is new lets wait a couple of months we are in the 2nd month of the release of Vista but still no result...
I hope the drivers come fast cause i hate to look at a screen with max light it is bad for your eyes :P...
Greetings

@bombaci
> Well first i thought ok Vista is new lets wait a couple of months we are in the 2nd month of the release of Vista but still no result...
Before you will post some untruths you should check the available driver pages.
The Vista drivers are available and I dont see any problems.
So take my advice and check whole options before you will open new posting! ;)
Greetings

Where are the Vista drivers for Qosmio X300

I have bought a qosmio x300 with q9000 quadcore and SLI 9800m gts
A nice notebook.
i have install on this notebook vista ultimate ( the notebook is sell with vista premium).
but, i don't have the drivers ...
ok, i search on toshiba web : usa, taiwan, australian, canada, french, europe, etc...
but i search all the drivers : toshiba hardware setup : all the version that we can find on toshiba web's site are wrong...
and a lot of drivers are same.....
so where can i find the drivers for my notebook ??

There are no good or bad drivers. Maybe you do something wrong.
The fact is that all drivers listed on Toshiba support page are absolutely the same as in recovery image. So there is no difference and all of them can be used on every Vista version.
By drivers, tools and utilities installation is important installations order. So please install and configure Vista following this installations order:
Windows Vista
Intel(R) Chipset Module
Intel(R) Turbo Memory Driver(Intel iMSM Driver)
nVidia Display Driver
Realtek Audio Driver
Realtek Network Driver
Alps Touch Pad Driver
Synaptics Touch Pad Driver
Jmicron CardBus Controler
TOSHIBA Software Modem
Modem Driver
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
Flash Cards Support Utility
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA Assist
TOSHIBA Speech System
Dolby Control Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer
TOSHIBA TRS Driver
HDMI Control Manager
TOSHBA Face Recognition (SmartFaceV)
I hope this list will help you.

Why am I seeing this message when I try to access my Creative Cloud account - 'We are unable to load all your plans & products. Please try again.'

Why am I seeing this message when I try to access my Creative Cloud account:
'We are unable to load all your plans & products. Please try again.'
I want to see which products are included with my CC subscription - e.g. do I have a Prosite portfolio website or would I need to pay for an additional subscription?
Is this a temporary site issue or an on-going problem?

Please refer here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Regards
Rajshree

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

When are Audigy 2 Vista drivers comi

What is the problem with Creative and Vista?
Why can't U make some proper drivers?
The driversupport Creative is giving to their users is dramatic! An X-Fi of Audigy 2 lost all its EAX features in Vista!!! Vista is out for a half year now, and I still have to work with BETA drivers which is giving weird positioning bugs in games!
Whats the problem
I paid for the card so I really need some driver support!
What?s ur opinion on this dear creative usersMessage Edited by dhp on 05-20-20072:53 AM

DyNaMiX wrote:
OpenAL hardly means much to Audigy users.Message Edited by DyNaMiX on 05-2-20072:46 AM
What makes you think that. OpenAL works just fine on Audigy cards. Playing BF2 in vista sounds just the same as in XP on my A4.

VISTA Drivers for Creative Webcam 73VF004000

Hi,??I have a Creative Webcam (WEBCAM INSTANT)?73VF004000000 which was working fine on Windows XP... recently, I bought a new computer which came in with Windows VISTA... Vista doesnt recognize this webcam now and I am unable to find the drivers for this webcam...
?Any pointers to VISTA drivers for this webcam will be highly appreciated... Thanks.

Windows XP doesn't support Parallel Port webcams, so I do not believe it is even possible to make such a driver. That webcam was also made back in 994-95...
Sorry.
Dale

Vista Drivers for Creative Visio

I have?charged it up and?installed this on my home pc, but despite it being plugged into the USB slot, the pc keeps asking me to insert the player. I assume that the drivers are the problem, so the pc isn't recognising the player, so any ideas or suggestions to get them talking?Thanks.

glenmoranjie wrote:
Which heading will it be "under", i.e. audio visual etc?
In device manager, it's under the heading 'Portable Devices'
Perhaps you can try the steps in this thread and see if it hel
ps.
http://forums.creative.com/creativel...essage.id=8775
Jason

Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
<span class="postdetails">Windows Vista Drivers for 820 and 66
I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
With a setup like this, who needs a mac?
AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
2 Gigs Corsair
Samsung SyncMaster 206BW 2" Wide Screen
EVGA NVidia 9700s 256 DDR3 Graphics
SATAs up the yin
and a PCIMIA to PCI Dock
All under Vista Ultimate OEM
And Guess what?
Months into RTM of Vista...
E-MU is caught pushing release dates.
Last month it said they would release beta drivers middle of April...
I waited, patiently I might add.
I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
I have stood by waiting in silence for a very long time.
Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
And I have been looking forward to all i can do running both of them side by side.
Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
My thoughts for today.
~Alpha-Beta ReaKKtor

Hello Silas,
sorry for my bad english
I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
Now it works!

Creative your vista drivers are a diaboli

Similar Messages

Maybe you are looking for