Creative Zen - how to order playlis

I just got the new creative zen but I can't figure out how to order the playlists. When I create a new one, it orders it alphabetically. In media explorer, if I drag/drop it to a new place, it doesn't fall into the new position, it adds all the songs from that playlist to the one I just dropped it on. It never "fits" in between the other playlists.

"Because wma files take less space than mp3 files. "
That is a myth. For lower bitratrate files, such as 6 kbps or 32 kbps, WMA files will sound a bit better than mp3 files at the same bitrate. Files at such low bitrates are typically lectures and podcasts, and not music. Music files are usually 28 kbps and up. At
those bitrates, there is little quality difference between WMA and MP3 files at the same bitrate. WMA files do take more processor power to decode though, so expect shorter battery life when playing WMA files rather than mp3 files. Furthermore, recompressing files that are already compressed will result in lower sound quality. For example, if you have some mp3 files at 256 kbps and want them on your player at 60 kbps to save space, you should make the 60 kbps mp3 files from the CD, and not from the 256 kbps mp3 files if you want the 60 kbps mp3 files to be the best quality they can be.

Similar Messages

  • Creative Zen Micro : Error w Playl

    I'm having problems with transferring an entire imported playlist into my zen micro.
    I've recently updated both my firmware and MediaSource to the latest version. Loaded MediaSource up and imported a playlist that i created using winamp. Then I clicked and dropped the playlist into my zen micro and a new window pops up showing the progress of the songs transferring into it. But while transferring, many of the files had Error under the Progress. Note that I am able to listen to the songs in winamp, but am unable to listen to the "Error songs" in MediaSource. Attached is a screenshot of what happened.
    [img"]http://img.photobucket.com/albums/v483/milo_dinosaur/error.jpg">
    I've tried to create a new playlist in MediaSource, and imported the songs. But it also did not work.
    Also, I found out that under My Playlists in my Zen Micro, there are many playlists named Creative Zen Micro, while the one that I've highlighted was the only one that I've created.
    [img"]http://img.photobucket.com/albums/v483/milo_dinosaur/huh.jpg">
    Went into rescue mode, reformatted the zen micro and even did a clean up. Nothing worked.
    So, can anyone help me see what's wrong? Hopefully someone here can help before I email the Customer Service team again.
    Thanks in advance. =)Message Edited by milo_dinosaur on 0-9-2005 :54 AM

    Yes I'm currently using 3.30.2
    I've finally found the problem. My computer currently has 2 user profiles, the first one is 'Owner' and it's the directory I've saved my mp3 files at. Second one is called 'pokey' (just a nickname, don't ask why! :P) which I frequently use. So, my playlist called 'blabla.m3u' was saved under pokey, which is C:\Documents and Settings\pokey\My Documents\blabla.m3u.
    I opened up my playlist using notepad and saw that it's file path was
    "\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    So, MediaSource would just tag the filepath of that song as
    "C:\Documents and Settings\pokey\My Documents\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    That was where it went wrong.
    Now, I save my playlists under the 'Owner' profile, and it works fine. file path shows up as
    "C:\Documents and Settings\Owner\My Documents\My Music\Apocalyptica - Bittersweet.mp3"
    which is exactly where I placed the files.
    So now everything works fine. The thing is that I have to save the playlist in the same profile as where the mp3s are located at.
    The error actually existed because MediaSource couldn't find the file at the designated filepath. I guess it was an error on my part.
    Anyway, thanks for the quick reply! It's really very much appreciated.Message Edited by milo_dinosaur on 0-9-2005 0:24 PM

  • CREATIVE ZEN, HOW TO CHARGE THE BATTERY.

    <DIV align=center>Hello, Just got a Zen Micro and just installed it and all that and then when i was messing about with it the battery went so when i went to charge it i plugged the USB in the back of my computer and plugged it into my Zen, It did work for a bit but then i played with it a bit more and now the battery has totally gone, when i plug it in, it doesnt show up.. Im just wondering if its still charging, even though it doesnt light up because in the instructions it says that it should light up and show a symbol but it cant do that cause the battery is dead? Just confused... Please reply soonJoxxxx
    <DIV align=center>
    <DIV align=center>p.s. It looks amazing though! People give it bad reviews NOT ME!!:smileytongue:

    ah buddy it just happend to me when my friend lent me his zen mirco for me to fill up with music, u just pop open the back take out the battery, plug in the USB and then put the battery back in and everything should be fine, dont worry

  • Creative ZEN - How to lock

    Sorry for the stupid question,but I didn't seem to find the answer here nor in the manual,and I read it's essential for the battery life to lock the player while just listening...so,how to lock this thing?

    Well... you've got 0 views to the actual post and nobody was kind enough to help you...
    Since it is my first post, here's the answer:
    When you slide your power button down, it powers on the device, right? When you slide it up, it locks the player during playback.

  • Creative Zen 8 gig - How do I play all videos at one time and skip to next vid

    I was able to do this with the Creative Zen V plus 2 gig, why can't I with the large and more expensi've one?
    THanks,
    John

    I have the same question as the original poster.
    I am loading the zen with music video files only (wma) and would like to have the same playback options as mp3s.
    I understand video file dont have "tags" like mp3s used to facilitate searcing for tracks eg. artist,album etc and i wonder if this could be a problem.
    The question is...How do i get the player to play a list (or folder contents)) of video files either randomely or consecuti'vely without having to do it manualy for each and every video ie set up a playlist. Or is this not possible
    Thanks

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

    I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Creative Zen 32GB - how do I remove blank FM presets???

    How do I remove blank presets from the FM list? I have about 20 stations set up as presets but the other 2 blank ones are still there. Delete doesn't delete them. All delete does is to erase the station from a preset that has a station programmed into it. I want them GONE so that when I sequence through the station presets I don't have to go through the 2 blank ones to get to the next good one. If this is not possible, holy cow, what an oversight on the part of the programmers! Please tell me this can be done!
    This is for a Creative Zen 32GB. Not a Zen V or a Zen XFi. Just a Zen. Just a plain Zen.
    Thank you.

    Wow. That's very odd indeed. Seems pretty logical to be able to do that. There's no way I could program in 32 stations and I li've in a major radio market. There are not 32 stations I'd ever be interested in listening to around here and I don't even think there are that many even on the air. Again, since that's software related, please put that in a firmware update.

  • I just reset my computer How do i get the music from my Creative Zen Touch onto my computer aga

    Hi, I just had to reset my computer and i lost all my music... how do i get the music from my Creative Zen Touch onto my computer so i can listen to music again on my computer?

    itsVASH,
    Basically you do the reverse of how you got it onto the player to begin with. You will open up mediasource, select the Zen Touch in the left hand source window, select PC Music Library on the right hand side. Select your songs and press the arrow pointing to the right.
    Jeremy

  • How do I import music and picture files from my Creative Zen?

    I have a Creative Zen media player, which uses Windows Media Player to operate. I have downloaded media player for Mac OS X, but cannot figure out how to import my music. On my old PC, when I plugged in my mp3 player, it automatically was recognized. Nothing happens when I plug it in to my iMac. What do I need to do?

    I have bought a couple of Creative MuVo's for loved ones, and they, as removable USB thumb drives, work well with any OS. The Zen, on the other hand, doesn't have the design simplicity of the MuVo, which is why I didn't buy one. I think that they will pretty much only work with Windows.
    One thing is for sure: If you plug in the Zen and it doesn't mount on the Desktop or in a Finder window, it isn't going to work with OS X--yet, at the same time, might possibly get corrupted or damaged when it fails to mount correctly and then you unplug it
    P.S. Windows Media Player 7.1 for Mac does not have any support for portable players, and given the availability of Microsoft's free Flip4Mac plugin, is truly a worthless download. If this program has been installed, it would probably be best to delete it (and its preference files for that matter) to avoid potential conflicts with the up-to-date Flip4Mac plugin, which I assume you're going to install. Keep in mind that this plugin has nothing to do with adding support for portable players, but since we're on the subject of Windows Media Player, I thought it in good judgment to mention this.

  • How to save video to play on Creative Zen Vision M

    My (PC using) friend just bought a Creative Zen Vision M (the competitor to the video iPod). It will play MPEG1, 2, and 4SP and will play MPEG's created in an older version of iMovie (I forget which, it's been a few years). For some reason, the MPEG4 version created by iMovie HD6 is not compatible with the Zen player.
    Does anyone have any ideas of how to export from iMovie HD 6 in a format that can be used by the Creative Zen Vision M?
    Thanks.

    >Hi,
    Sorry about your ZEN Vision:M. From what you mentioned, I don't think the data is recoverable under normal means. You probably might want to take it to a technician? or someone who is familar with electronics to see if they can remove the harddisk from the ZEN Vision:M and recover the data.

  • How to transfer files from Creative Zen Touch to Creative Vision:

    Is there a way to transfer my music files from my Creative Zen Touch to my Vision:M?If so, can someone tell me how to do this. ?I know this has probably been asked before but I am new on this message board and am in need of assistance. It would be greatly appreciated. Thanks

    If you have both the player and you're using MediaSource, just connect both the player to the computer, select one of the player as source and the other as destination and just transfer over it. Note, protected content will not be transfer over though.
    JasonMessage Edited by Jason-CL on 03-27-2006 06:54 PM

  • I have lost my installation CD for my Creative Zen Touch, how can i get a new one plea

    Any help would be brilliant.

    Here are direct links. Download the following files and install them in the order I listed:
    NOTE: This is if you are using Windows XP
    ) Creative Media Source:
    http://us.creative.com/support/downloads/download2.asp?Product=0274&dlcentric=868&Product_N ame=ZEN+Touch&OSName=Windows+XP
    2) Creative Zen/Nomad Plugin for MediaSource:
    http://us.creative.com/support/downloads/download2.asp?Product=0274&dlcentric=9320&Product_ Name=ZEN+Touch&OSName=Windows+XP
    3) Creative Nomad Explorer (for acessing your zen directly from My Computer)
    http://us.creative.com/support/downloads/download2.asp?Product=0274&dlcentric=8069&Product_ Name=ZEN+Touch&OSName=Windows+XP
    4) Drivers for your Zen Touch
    http://us.creative.com/support/downloads/download2.asp?Product=0274&dlcentric=00098&Product _Name=ZEN+Touch&OSName=Windows+XP
    That should cover all the things on the Zen Touch CD, if you install them in that order everything should go fine
    If you notice anything missing, ask back, I have my Zen Touch CD somewhere around my room and can look up to see if theres anything that you should have gotten.

  • How do I turn off image/picture from Creative Zen display?

    :How do I turn off image/picture/cover art from Creative Zen display?
    I wouldn't mind it, but it's almost ALWAYS wrong! Why is that? It seems to pick a random - and I mean random - album cover every time I upload songs. WHAT makes it decide this? I have dance collection cover pics turning up for rock songs!
    If someone an help me solve this problem, I don't mind having the images show up.
    Thanks!

    >Hi,
    The album art is usually associated with an album artwork and is supplied together with the music tracks. The player will not display it if there isn't one. You might want to make sure that the album art is linked correctly to the music track.
    Refer to this article for details:
    http://support.creative.com/kb/showarticle.aspx?sid=879?

  • Creative Zen M 30GB, How do I select folde

    I have a Creative Zen M 30GB and I cant seem to find a way to select folders.
    The player lets me select music by albums, artists, genres... but It does not let me select the folders as they are on the mp3 player.
    This reallly sucks becase I have music sorted and picked out, in seperate folders....
    Any one know how I can select folder on this player or can it even do this?

    I have the same question as the original poster.
    I am loading the zen with music video files only (wma) and would like to have the same playback options as mp3s.
    I understand video file dont have "tags" like mp3s used to facilitate searcing for tracks eg. artist,album etc and i wonder if this could be a problem.
    The question is...How do i get the player to play a list (or folder contents)) of video files either randomely or consecuti'vely without having to do it manualy for each and every video ie set up a playlist. Or is this not possible
    Thanks

Maybe you are looking for

  • Using multiple variable names in a for statement?

    I have searched, and I just can't seem to find how to do something, I do not have the code atm, but easy enough to explain... I have a GUI that has 3 rows of 3 fields... emp1Name, emp1Phone, emp1Fax emp2Name, emp2Phone, emp2Fax emp3Name, emp3Phone, e

  • Problem with changing my DE

    I use asesome archiso-live, its default DE is Xfce. Now I want to change to lxde. I tried to modify xinitrc, but it didn't work. What should I do?:rolleyes: Last edited by wlgyyk (2009-08-18 04:51:33)

  • External Antenna for WRT300N

    I have the WRT300N Router and want to install an external antenna to increase my range. I cannot find a method of unscrewing one of the three existing antennas so I can hook up the extending cable. Do I have to break open the case and hardwire it? Wh

  • Toad error ORA-01026: multiple buffers of size 4000 in the bind list

    Hi All when iam running explain plan in Toad version 11.5.1.2 the below error coming, ORA-01026: multiple buffers of size > 4000 in the bind list i have checked the all possible solutions provided in forums but no luck I hav changed NLS_LANG paramete

  • Copying Appraisal Form data from Old to New..

    Hi, My client has been using an Appraisal template since last year and all the users keyed in their data already.Then they wanted some minor changes in the existing Appraisal form.We have created a New Template. Now my Client wants to Copy all the ol