Creative Zen - Installation Probl

Hi there,?I was installing my Creative zen and my computer crashed out half way through the installation process. I tried Uninstalling the program but it will nor unistall as there is an error, i tried re installing it but it will not let me and i tried using the repair button when the disk is put in and it wont let me do that either. Has anyone got any suggestions on how i might be able to fix this problem. Does the program have to be installed for me to use it, can i just use it like a portable dri've and move files over into it's?ThanksChris

Same problem, purchased my creative zen Micro 0-0-06. Noticed 4-25-06 that I can not turn on my zen with on/off switch. I can however get my zen on by plugging in usb cable. Very frustrating since I have taken good care of device. $78.00 did not give me many day of usage. If you find a solution to the prob let me know. Thanks.

Similar Messages

  • Creative Zen Connection Probl

    I have the Creative Zen MP3 player (version .00.02) an i downloaded the driver from the support section but windows media player and creative media source don't recognize it. It comes up under My Computer but i can't do anything because it is very slow (can't click on songs can't delete or add) anyone know a fix?
    Thanks.Message Edited by jargs on 09-7-20070:06 AM

    What o/s are you using XP or Vista, but first look in the update section for a new firmware update, and read the instructions on how to update. This solved all my problems and made the player much better!

  • Creative Zen Hardisk Probl

    i go into my recovery mode to try and format my disk and reload my firmware for my creative zen micro player, since i have come accustomed to doing that over the months of ownership. however when trying to do either a message prompts me that i have a HARDISK PROBLEM is there any way to overcome this problem or will i have to take my player in for servicing.

    jeeeez, i have said this like 0 times in other posts
    If the Recovery Options are not helping, the only other solutions are:
    Send your player in to Creative, they will repair it for Cash
    Try banging your player on the side, this will help because a) your hardri've is probably stuck b) it will loosen your hardri've back to a "normal Operation" state
    The second method has worked for me twice with my old Nomad Jukebox 20gb.

  • Creative Zen Micro Probl

    Hi,My Creative zen Micro is not coming up as a removable dri've, yesterday when plugged into the USB is came up with found new hardware, but now nothing. I downloaded the drivers but nothing works. I can't update the firmware on it, because it isn't recognised. The USB cable works fine because it charged the mp3 player - Any ideas?

    I've got the same problem, I tried to upgrade the firmware, and after my pc didn't recognise the zen micro anymore, I can't do anything with it anymore...
    hope the support can help me solve this, anyone has any ideas? or has solved this before?
    thx
    duck

  • 40 gig and 60g Creative Zen Nomad probl

    I'm sure these are dead horses on the board but recently I've had two players cop out on me and of course the phone lines at creative don't offer any help, other than advising me to buy a new one of their products (no thanks). Here's the deal:
    <SPAN class=postbody>one freezes on building library screen and there is absolutely nothing i can do to get off that screen the other one just goes to the rescue mode after the eax screen and i can't do anything from there aside from rebooting.

    The?BEFORE you post, READ THIS FIRST (FAQ) post links to information about this error here in the Zen FAQ at Nomadness.net.

  • Creative ZEN Hardware probl

    Ok i tryed to put in a new battery and from here on out i get stuck.
    All i get is a thing that say''s hardware problem. Iv tryed to hook my usb to it and it wont even read it. It makes a funny noise like it stuck thumbing through songs. All i hear is that clicking thing over and over.But the main scree has a pic of the zen that say's hardware problems.
    . I did not know that Creative had so many problems until i came here i wish id had know before i bought this. I got this Feb 22nd and regestered it. I was only gonna use it when i went riding. We i went riding it lasted 2 hours before this problem happened. Anyhow any help would be great. I send creative a letter and still havnt hear back from them. So please hlp plz i paid alot of money for this and im very ticked off.

    slayer wrote:
    I tryed to take the battery out and hold on the on. That did nothing still said the same thing harware problem. Ix emailed creative which iv loved for a long time but man when it comes to these they flat out want nothing to do with you. 3 emails later i still havnt gotton a reply,. I may contact my lawyer and have them contact them. Iv spent over $500 for this and acc.. only to not have it work. Not only that have no one return my call. From what iv read on this site it seems they never even tested these things. Seem they let us test them only to find that there selling faulty stuff and im sure they know. They should do a recall to everyone of these darn things. Anyhow i will continue to try to work at this. It baffles me that spending so much for something and i can make it work isnt right.
    Creative is usueally good at replacing broken zens. I don't know why you are so upset, just get a new one and go on.
    And if you think that Creative has a lot of problems with there micros, look at ipods (follow the link in my sig) If micros should be recalled, then ipods should be banned.Message Edited by penguinking3 on 05-8-2005 03:8 AM

  • Creative zen microphoto proble

    i'm having problems with the installation of this product. I have run the installation cd, and everything was installed correctly. Now....when i plug the zen into the usb port it displays "NEW HARDWARE FOUND". It runs through the process of scanning for the hardware to install it but cant find it. :S:S:S:S:S:S
    Is this a problem with the CD? or the PC or what?? Help.....

    Firstly, does your system meet the requirements? It needs to be Windows XP, with SP or 2, and Windows Media Player 0.
    The driver for the player is provided by WMP0, and located in the WINDOWS\INF directory. You can try getting the device to look there, by forcing a driver update from Device Manager.
    There's more advice here in the Zen FAQ at Nomadness.net.

  • Creative Zen Micro proble

    Okay so my friend gave me an old Zen Micro, the current firmware on it is v0.0.65. It says it has a firmware prbolem. I just reformatted my comp back?to windows XP, I downloaded both of the drivers, plugged my it in via usb, ran the installation. I tried the firmware upgrade and it doesn't recognize it...can someone tell me why..

    i have also expericend thisproblem with the player turning itslef on even when its on hold, verry annoying as the battery runs down,
    But i would not worry about this problem in comparrison to my Zen micro not even woring as the headphone jack is loose.
    REGARDS andy

  • Rebooting Creative Zen Microphoto Proble

    I have had my Microphoto for about 4 years now and it hasnt crashed or anything till these past weeks. It was freezing, not charging fully, and turning off by itself. When i went to Creative's help site it said to try to update the firmware so i did. While it was in the trying to update my player froze in the Recovery Mode and now whenever i turn it on it goes back to that screen and I can't change it. Also its practically dead and won't charge so sometimes it is even hard to get it on. And as others have said, my computer won't recognize that it is plugged in IE why it won't charge probably as well.
    I have a windows XP
    I think my WMP is actually 9 or 0. I'm not sure on where to find the actual version.

    A couple things if you're using the same battery that came with the player replace it. Sounds like hard dri've is dying. But if the battery is bad you would not be able to do the update to firmware.You need WMP0 to do firmware upgrade. Open Media Player at the top where it has File,Tools ect. Click on HELP the sub-menu click About Windows Media Player. That will tell you the version.

  • Micro zen installation probl

    i have a freind who has a micro zen and he li'ves a long way away but all i want to do is copy his music onto my computer he hasnt got any cds, it is soo difficult its not simpleat all, why are the files protected in my computer, can u tell me what i have to download and run to copy them onto my harddisk

    i have a freind who has a micro zen and he li'ves a long way away but all i want to do is copy his music onto my computer he hasnt got any cds, it is soo difficult its not simpleat all, why are the files protected in my computer, can u tell me what i have to download and run to copy them onto my harddisk

  • Creative ZEN 4gb probl

    it is freezing and saying it needs a firmware update but it wont even turn on and now when i plug it in it will turn on but as soon as it says CREATIVE it either freezes or black screens and stays like that until i hit the reset button the question i have is how can i save the thing if at all possible

    Hello Shugo828,
    Welcome to Creative forums!
    There is troubleshooting guide available in the Knowledge base that you might want to try. Click here.

  • Creative zen v probl

    Ok, i'm sure this has been asked about a thousand times on here but i've searched around and i am still confused. I have a ZEN v gig, win 2k, and the player says its version .05.02. The downloadable driver on this site is for 2.xx.xx players only right? I intsalled it anyway and of course its not working.....hopefully someone can help.
    thanks...........

    jfi'veonetwo,
    The number .05.02 is the firmware version of the player. There isn't any downloadable driver for MTP device such as the ZEN V you have as the driver for MTP should already be included with Windows XP latest service pack and WMP0. I believe your problem lies in the OS as you mention you're using Windows 2000 instead of XP.
    Jason

  • Creative Zen Touch Proble

    My Zen Touch won't turn on. I thought it had a low battery, so I hooked it up to the charger, but the usual little battery in the upper corner of the screen didn't show up. It won't turn on and when hooked up to the computer, it isn't detected. But the little blue power light is on and I can't shut it off. Any ideas?

    I tried resetting it. But now the blue light went off and it won't turn on either. When I hold down the power button as if I'm trying to turn it on, the blue light blinks three times. Now what... =[ Help would be appreciated.

  • Installation Problems with Creative ZEN an Win XP SP3 (germ

    Hi,
    first of all, i am german so my english isn't hte best...
    i bought a creative ZEN 4GB. i installed all the stuff on the installation-cd restarted my system plugged the ZEN in my USB-Port WIN XP mentioned a new device and wanted to install an MTP device. i clicked on automatical search after some seconds windows found that mtp device but after two seconds a becam an error-message (it's in german: "ein dienstinstallationsabschnitt dieser INF datei ist ung?ltig"). so i can't communicate with my ZEN,i can't load music on it and so on.
    do you have any idea how i can communicate with my PC and the ZEN ? please help me :-)
    my system:
    AMD 2500+
    gig DDR RAM
    enough hard-disk-space
    WIN XP PRO SP3
    thaks a lot

    Der erforderliche Abschnitt wurde in der INF-Datei nicht gefunden (Fehlermeldung in Windows XP)Wenn Sie ein Creative-Produkt installieren und Sie erhalten die Windows XP-Fehlermeldung "Der erforderliche Abschnitt wurde in der INF-Datei nicht gefunden", ?berpr?fen Sie bitte Folgendes.
    Stellen Sie sicher, dass Sie in Windows XP ?ber die neuesten Treiber f?r Ihr Produkt verf?gen. Um zu pr?fen, welches die neuesten Treiber f?r Creative-Produkte sind, klicken Sie hier.<
    Knowlage base SID 7777

  • Re: Installation: Creative Zen Vision

    Everytime since I got my new computer, I've been getting errors with installing Zen Vision: M. I get errors during installation. It tells me something about DoInstall in most of them and also CTinstall. I've installed it about 6 times already. Also, after installation, there's no icon or application for Zen Vision: M I looked all over the folder for it. I'll go and reinstall it, and post the errors I get.

    It's been a while since I've used my Zen and tried the installation CD. The whole thing started when I first reformatted?my computer. I appreciate your help rummor and I've tried putting the installer in my HDD. It still doesn't work. I still get the same errors. I doesn't?seem to be the CD since the installation CD seems to be working fine with other computers and i've also tried it on?a friend's?laptop which worked too. They all seem to work on other PCs but mine. I tried again recently to install?the software but I still get the errors. The Creative Zen Media Player seems to work when I install it. The product registration, the audible manager,?and the video converter also work. All those I can use but the Zen Vision: M Explorer. Help would be very much appreciated. Thank you.

Maybe you are looking for

  • Bluetooth on Mac Pro

    I have a 2 x 3 GHz Dual-Core Intel Xeon Mac Pro and just ordered and received a Magic Trackpad. When it arrived I discovered that it is a bluetooth device. I have a D-Link Bluetooth DBT-120 dongle. I plugged the dongle into my MP but the computer and

  • My website is broken in DWCC.

    It was fine in February, but now that I want to make some changes and add to it, it opens with blue word links instead of the navigation system I originally put in. How do I get my website back to working order? The CSS file is attached properly in t

  • Trouble with my BllackBerry ID

    I created a BlackBerry ID recently, when I set up my PlayBook. Unfortunately,I misspelled my email address, and cannot remember my password. How can I recover my account?

  • Customized fileds in PR/PO

    Hi, I need to add GSC, Process Area, Commodity Type customized  fields in PR/PO. Can you pl. suggest me what are the possible ways . Thanks in advance Moderator message - Cross post locked Edited by: Rob Burbank on Jul 2, 2009 11:04 AM

  • Issues loading .txt files from server...

    Hi. I have an issue with a script I created that loads text strings from a file on my server. The swf file loads a message from a .txt file, displays it in an animation when the animation finishes it loops back to the start and loads the next message