Creative Zen Micro 4GB - battery problem?

Hi there,
I try charging my MP3 player via USB cable from my laptop. I see the small battery symbol with the charge symbol within it. It is not flashing. I don't have my installation CD anymore and this laptop is a new one that I haven't charged from before. I cannot get my player charged - what can I do?
Many thanks,
Steve

Batteries last about 3yrs. How old is the player's battery? Is it recognized by the computer? What firmware version is on the player? Is the laptop Vista or XP ? You can purchase a wall charger so the device is not dependent on the computer for charging. This is the best price I have found on a real one(Creative) for the Micro also works for the Zen,ZenV, X-FI.http://cgi.ebay.com/ws/eBayISAPI.dll...em=30030054696

Similar Messages

  • Creative Zen Micro 4GB isn't recognized on my PC

    Hello,
    I bought a Creative Zen Micro 4GB?couple of years ago (3-4 years ago) and lost it year ago. I found it now and wanted to start using it but I have a problem. I bought a new laptop which is Vista and my pc doesn't recognize the player when I plug it in. It recognizes it and the bubble comes up at the tray, but it doesnt recognize it and says it can't find the driver and that I need to install the driver. However, since my pc can't recognize it, I can't install a driver or do anything with it since it isn't recognized by my pc. I read lots of posts and solutions to them, but none of them help my problem. In the device manager, it is apperead with a yellow explanation mark but I can't reinstall the driver. I also tried the cleanup and reboot but that also didn't work. Can anyone help me? (I also tried this on my old pc which has XP but it had the same problem.) My Pc is Windows Vist 32-Bit Operating System and Service Pack . By the way, when i plug in my zen micro, the window comes saying 'found new hardware' and I am suposed to locate a place for the dri've and it says i should insert the disc that came with it. However, when i insert it nothing happens and in the end it says it failed. I really need urgent help. Thank you in advance already.

    Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
    Welcome to Creative forums!
    You may want to check out this threads for resolution on your issue:
    CREATIVE ZEN MICRO and WINDOWS VISTA
    Zen Micro and Windows Vista
    Windows Vista / Zen Micro

  • Creative Zen Micro 4GB:HEL

    is there like any way i can turn on the speaker mode?

    Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
    Welcome to Creative forums!
    You may want to check out this threads for resolution on your issue:
    CREATIVE ZEN MICRO and WINDOWS VISTA
    Zen Micro and Windows Vista
    Windows Vista / Zen Micro

  • Zen micro 4GB battery l

    hi,
    just bought a zen micro 4gb a week ago. using usb to charge it since I didn't realize the unit didn't ship with a charger. only getting about 4 hours on a full-charge. any body else experiencing this or is my battery defecti've? thanks.

    Kero35 wrote:I didn't know the 4gb shipped without a charger. thats rediculous!
    No Micro ships with a mains adapter now. This was part of a price cut that was pretty obviously designed to compete with iPod (who also dropped mains adapters from the package).

  • Creative Zen Micro seperate battery char

    Hi, I'm looking to buy a Zen Micro to take snowboarding this winter, The main reason I decided upon the Zen Micro was it's size and the fact that the rechargeable battery is removeable.
    The problem, is that I can't find a seperate battery charger for it anywhere.
    I want to be able to leave one battery charging, whilst i'm using the other one.
    All of the chargers I have seen use the actual player as part of the charger, this seems a little rediculous and pretty much ruins the advantage of having multiple batteries, might as well just buy an Ipod Mini?!?
    Are there any free-standing Li-Ion battery chargers available for the Zen Micro battery?
    Thanks..

    There is nothing specific for the Micro.
    I have seen some 3rd party chargers, which have a custom plate made for the battery, but as you can imagine these are expensi've (you'll have to Google to find them).
    I think that's the issue with a separate charger. It will be expensi've, and few people will want it, hence Creative aren't going to make one (and haven't with any of their MP3 players to-date).

  • Creative zen micro earphone jack problem. does it still ex

    ok im thinking of getting one also but does the newer version have the earphone jack problem still?

    conor48: There have been emails copied and pasted from purported Creative employees saying that it was fixed in later revisions, but Creative Support have neither confirmed nor denied this officially on the forum.

  • Creative Zen Micro 4GB - Headphone jack & transferring probl

    I haven't updated my firmware since I got the player in May (out of the box firmware update? Go away).
    My headphone jack is loose. I'll often only have music in one ear, especially if I'm walking or sitting down and have the player in my pocket or bag. I've started carrying my discman because I don't like pulling out my $300 mp3 player every couple of minutes. Is that the infamous solder problem?
    Also, my computer no longer recognizes the player. My sister had the problem a little while ago (same player, newer firmware because she got hers a month ago), and we reinstalled the drivers and everything is cool. Mine still doesn't work.

    samaxnthah wrote:Is that the infamous solder problem?
    Sounds like it.
    Also, my computer no longer recognizes the player. My sister had the problem a little while ago (same player, newer firmware because she got hers a month ago), and we reinstalled the drivers and everything is cool. Mine still doesn't work.
    What firmware do you have on your player?
    Have you run a disk cleanup from rescue mode?
    When you connect the player is it listed in Device Manager?

  • Creative Zen Micro 6GB/Problems with Power Switch and Firmw

    The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
    So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
    So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
    As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
    What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
    Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

    Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
    If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
    MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
    Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Creative Zen Micro Photo Problem (Detecti

    BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
    HERE IS THE PROBLEM:
    YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

    I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
    I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
    If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
    Eric

  • Problem with Creative Zen Micro software detecting certain C

    Hi,
    I hope someone can help me. I recently purchased a Creative Zen Micro MP3 player. So far, I have very few complaints, apart from the fact that while travelling on the bus, it won't seem to detect any radio stations.
    The problem re: the software though is that it will only detect the last track on three of my CD's. None of these CD's are damaged in any way, but all are from the same record label. Anyway, I was wondering if anybody had any tips on how I might be able to transfer these albums onto my player?
    Thanks a lot.

    My zen micro problem:
    Brief Problem description :.When I put a battery in the Zen micro, it automaticly turn on andshow "hardware problem" and freezed.2. If I connect to power adapter, i it automaticly turn on and show"hardware problem" and freezed.3. If I connect to my computer via usb cable, my computer can not findthe player and the player do not turn on even I switch on. As long asI put the battery in it, it automaticly turn on and show "hardwareproblem" and freezed. My computer still can not find it. I'm sure thecomputer and usb cable is working because all of my other device isworking ( include mouse, keyboard, logitech web camera, canon digitalcamera, samsung 52MB mp3). I try to take off all of theother usb equipements and the zen micro still not work. I can not rewrite the firmware because the zen micro freezed at"hardware problem" and my computer can not find it.
    Help!!!!!!

  • Major audio problems with Creative Zen Micro 6Gb... need h

    I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
    -Bash

    Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
    If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
    MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
    Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

  • Problems with Creative zen Micro Pho

    Hello.
    Today my creative zen Micro Photo came.
    Eeverything works, the software, the player, but i cant put files on it. Hes loading the battery if i take the player on my USB.
    But the software (Zen Micro Photo Media Explorer) doesnt recognice the player, so what shall i do?
    sorry for my mad englisch, im from germany

    Have you tried going into Device Manager and updating the driver for the Micro? You don't actually have to install a driver update, you can just elect to use the driver that is already installed, and Windows will attempt to refresh the pairing between the installed driver and your specific player.

  • Creative Zen micro: "Firmware Problem&qu

    hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
    and it goes to the menu (think is called Recovery menu) and it shows:
    Creative Zen Micro V0.0.65
    1.Clean Up
    2.Format all
    3.Reload frimware
    4.Reboot
    now creative tells me to download a new firmware.
    i did.
    then to "RELOAD FIRMWARE"
    and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
    is there any way to fix this or is my zen busted?

    I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
    Remove all creative software and drivers from your P.C
    remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
    Downlaod the latest firmware for your player
    Re-boot/re start your P.C
    Go to the creative support website, and download the plays for sure software suite
    listed as:
    <i>. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 </i>
    install the software by clicking on it.
    RE-boot your P.C, with your player conected via USB
    once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
    Copnnect your player to its charger ( unless it charges via USB)
    On your player slect the reload OS option in the rescue menu
    When prompted by your player start the firmware update on your PC.
    <i>with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.</i>

  • Creative Zen Micro: Driver problems and mo

    Hello, hope somebody can help me out a bit here.
    My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
    It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
    So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
    I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
    Any thoughts?

    Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Maybe you are looking for

  • Why is a very bad version of McAfee being installed when I already have a version of McAfee

    I'm having a hard time understanding the logic behind this. I have to uninstall software to install the software I want because you're insisting on installing this nonsense. O and I'm complaining to McAfee since I'm a customer and I'm sure as **** no

  • Has anyone successfully installed 4 WD Velociraptors in a new MACPRO???

    This has been a long and very painful month... About a month ago I received my brand new 2.93GHZ 8 core MacPro tower with Apple Raid Card installed. I purchased 4 brand new Western Digital Velociraptors 10k 300GB drives to install in the 4 bays of th

  • Calibrating a New ACD Aluminum Widescreen

    I just purchased a monitor that is apparently from the last production run of the wide screen 20 inch Aluminum Apple Cinema Displays. They were discontinued in February and are the last of the low glare ACDs. My question is, what is the best hardware

  • UCCX on VMWare needs ethernet promiscuous mode?

    Hello all, Just noticed something in the vmware host logs: 2013-06-08T16:29:52.001Z cpu20:14694)etherswitch: L2Sec_EnforcePortCompliance:153: client ccx.eth0 requested promiscuous mode on port 0x4000024, disallowed by vswitch policy                 A

  • Air 3.9 will support OSX 10.9. How about Flash Builder?

    Currently, only Java 1.6 is supported in FB 4.7. Although most of the features work with Java 7, some, like the iOS packager, don't. It would also be nice if several bugs were fixed too. Are there any plans for updates to FB 4.7 in the near future (o