Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Similar Messages

Creative Zen Micro 6GB probl

I've some problems with my Creative Zen Micro 6GB MP3-player.
It won't go on anymore because the on/off button is broken.
The MP3-Player already had some problems with getting stuck while it was?starting up, so the new problem with the on/off button was new. I've send an e-mail to Creative support but I already did that for 2 months ago and I got no answer. Does anybody knows what I should do or what the adress of Creative is in The Netherlands so I can send my Zen to them?Message Edited by Mattijs on 02-4-200703:53 AM

To send in a unit you have to arrange that with Customer Support first, they will arrange everything and give you the address details along with a reference number that must be on the front of the package when you send it to us.
When you e-mailed us before, did you get an auto response back? That always goes out, if you didn't receive that, it's possible that either your request didn't arri've with us, or that you did get a response but it got stuck in a spam filter (if you have one set up).
Cat

Major audio problems with Creative Zen Micro 6Gb... need h

I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
-Bash

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
<i>. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 </i>
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
<i>with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.</i>

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

Creative Zen Micro: Driver problems and mo

Hello, hope somebody can help me out a bit here.
My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
Any thoughts?

Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Creative Zen Micro Not compatible with Windows Vi

My daughter has a Creative Zen Micro MP3 player, no video feature, just the the music player. She recently got a new computer that runs Windows Vista. She tried to install the program on her new computer, and it said the software was not compatible with Windows Vista. Does that mean I need to get new software from Creative Zen? to use the program on The computer running?Windows Vista? Any help would be appreciated..

The software that came on the original CD is not supported on vista.
The Zen Micro will work nati'vely with Vista if it contains the latest firmware version. If the Zen Micro isn't being recognized by Vista then you will need to use an older system (windows xp) to upgrade the firmware on the Zen Micro. Once Vista recognizes the Zen Micro you should be able to download Vista compatable versions of the software for the device from the creative website.

Creative Zen micro charging problems......but a Mac co

Since I own a Mac. I wasn't able to upload the software 4 my Creative Zen micro. I use XNJB. I wuz using my comp. @ work to charge it, (It only charged once correctly @ home). But now it won't even charge @ work and it is completely drained. And since I was never able to upload the software, the terminology used in this forum is foreign to me.
There aren't any bars and it doesn't pulse glow.
Someone please help, I am soooooooo frustrated and would rather just take it back, but i'm over seas.
Jemimah

Kynaeus wrote:
and you won't get it to work for your Mac because it is not a compatible system, check the box.
Not quite true. Creative doesn't support it, but there is 3rd party software that allow Creative players to be used on a Mac, and plenty of people who do.

Zen Micro: firmware problem with 2.00.

Hello,
I just bought the Zen Micro and did an upgrade of its firmware to 2.00.2 before playing around with it.
I then ripped CDs using WinMP 0 and tried to sync the device.
After around 30 songs, the Zen Micro did not accept any more songs.
I also tried the Zen explorer way by copying files directly to the device.
Same problem after about 30 songs, the device stops responding...
Any clue?
Thank you
Nicolas

First easy thing to try is a disk cleanup. To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
If that doesn't help, and to check if there is an issue between your PC and the player, try and find another PC you can test with. If the other PC works OK this suggests a USB incompatibility, so the quick solution might be to buy a good quality PCI USB card like Adaptec or Belkin. Not a wonderfully elegant solution, but USB cards are generally cheap and it might solve the issue immediately.

Creative Zen Micro Firmware problem: "Device not connected, please connect your devi

After an exhausti've search, I've found the fix for losing your firmware and not being able to update it via download from the creative.com. To explain my problem, I had issues with my device connectivity, so I tried to option of reloadinging my firmware via Recovery Mode (option 3, 'Reload Firmware'). After selecting this option, I tried to download and update my firmware via the creative.com website. The module to update my firmware displayed the error message "Device not connected, please connect your device." After about 2 hours of trying various suggested fixes, I found a relati'vely easy fix by running together various suggestions I found for other problems. First rollback your Windows Media Player (WMP) via the instructions found on this page: http://www.auditmypc.com/uninstall-m...layer0beta.asp. Restart your computer after rolling back WMP.
When your compter restarts, insert the "playsforsure" CD labeled "Easy Start CD." Follow the directions for reinstalling WMP. After WMP is reinstalled, restart again. When the computer restarts, return to the CD and follow the directions in the prompt. Reconnect your device when prompted. Once you reconnect your device, it may not function right away. If this is the case, go to the 'Start' button, under 'Control Pannel,' select 'System.' Under 'System' select 'Hardware' and then 'Device Manager.' Find your portable device under 'Uni'versal Serial Bus controllers.' Click on your device and select 'Uninstall' from the small icons at the top of the window. When this is completed, unplug and plug your device back in. After this is done, click on 'Scan for hardware changes,' also a small icon at the top of the window. If your device had the problem mine did, it should now be recognized. Go back to the Creative website and download the latest firmware. The module should now find your player without any problems.
The only thing I can figure is that the "playsforsure Easy Start CD" must have a device driver that solves the problem that you can't find anywhere else. I hope this helps someone out there (tech support was telling me that I was going to have to ship my device back to the company I bought it from to get it exchanged...which would have taken at least a month, I'm sure). Good luck to you all.

For all of you non-technical Micro owners:
I found a fix for this that I hope will help others out.
When I want to Sync tracks to My Zen using Yahoo Jukebox or WMP, I simply reboot my machine with the device PLUGGED IN. After Windows starts up, my applications recognize that the Zen Micro is connected. Good Luck.

Zen Micro connection problems with media explorer (my soluti

Hi all,
just wanted to share you my sollution to the connection probs with my Zen Micro. I have installed the MTP version of the firmware and found out it did connected to my machien (media player sync works) however media explorer was not able to install properly (it could not detect the device during install).
I found out that if I closed Acti'vesync (so it is not using the USB probing) it could detect the Zen Micro during install and media explorer installed properly. After this it only detects the zen micro whenever Acti'vesync is not syncing with my PPC or smartphone.
So therefore my sollution to this problem. Make sure Acti'veSync is not connected with a device thorugh USB.

What is "Acti'veSync?" I have installed the firmware and NapsterToGo and WMP recognize my Zen Micro but Zen Explorer does not. Maybe this will work for me. I didn't install CreativeMediaSource.

Zen Micro ~ Serious Problem with Synchronizat

I have a Zen Micro with the 2.20.05 firmware update. I've tranfered around 3 GB onto the player using Napster to Go. However now, as of a couple of days ago, Windows Media Player is causing the Micro to freeze. Since then I've only been able to transfer one to two tracks at a time. Also Media Player constantly attempts to transfer files that have already been transferred. Does anyone have any idea what could have possibly changed between the time that everything worked and now. It just seems non-sensical, it when from fine to busted. And it's pissing me off.
thanks,
km

Issues with the v2 firmware and WMP are tricky to solve. For starters you should try reinstalling WMP to see if that helps, but other than that I'm not sure what else you can try.

Creative ZEN Micro FM Remote with vision

I? am looking for a remote for my Zen Vision:M.Also i didin't see any other remotes for other players.and no other remotes were sold in my country!Will it fit to ZVM also?or there are different remotes for my players?if yes then whats the difference?Message Edited by varblane on 0-23-2007:44 AM

Have you checked the Zen Vision M's accessories page?
Works with ZEN Vision W, ZEN V Plus, ZEN V, ZEN Vision:M, ZEN Vision, ZEN MicroPhoto, ZEN Sleek Photo, ZEN Micro, ZEN Sleek, ZEN Neeon

Zen micro 6gb trouble with transfering music to the player pls h

I bought on ebay. It's used i download the cd installation. Tried to transfer with media explorer and windows media player, it wont work. The player seems "locked" when ever its connected it wont show the music inside of it, just displays the folders. I cant create, delete, add music whatsoever it keeps saying i/o error folder is exited or removed, and when i try to transfer it says pending for a long time and failed right after. Pls if any can help it would be really appreciated. thx in advance.

Can you flash it with firmware / have you tried that?If a firmware flash works, then try formatting the player. There's plenty of posts about how to do both of these tasks.When that's done, try loading some music. If it still give problems, something serious is wrong. Don't want to sound pesimistic but if it's used and you got it on E-Bay, you could have bought a dud. I've never usedEBay before so forgive me when I ask if you have any sort of comeback - e.g 4 day return period or something. Best of luck

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

Similar Messages

Maybe you are looking for