Creative Zen Micro and recovery m

Please help - Formatted the dri've and tried to update firmware due to an apparant firmware problem but now it doesn't even connect to my computer properly and won't exit out of recovery mode. Don't know what I'm after doing! It's almost 3 years old and never had any issues with it until yesterday

http://forums.creative.com/creativel...d=49936#M49936

Similar Messages

CREATIVE ZEN MICRO and WINDOWS VI

I hope this question has not been repeated.
I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
How can I make this product work with my Windows Vista 32-bit computer ?
Thank you !!!

Robby & Lizzy
First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
Now for an outline of the necessary ste
ps.
Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
Connect the player to the system with a USB cable and execute the program.
When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
RobbyBobson wrote:
Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

Creative Zen Micro and Podcast

I want to subscribe to a series of National Public Radio podcasts on a tool (maybe iTunes but I don't think the Creative Zen Micro works with iTunes) and be able to easily sync these onto my player. I have a Creative Zen Micro about a year old (or more?).
Does anyone subscribe and download podcasts to the Zen Micro that can post a How To? I open the Creative MediaSource Tool and can see the podcasts I want to sync to my mp3 in the "now playing" window but don't know how to get them to upload to the mp3.
Thanks for any help.

I want to subscribe to a series of National Public Radio podcasts on a tool (maybe iTunes but I don't think the Creative Zen Micro works with iTunes) and be able to easily sync these onto my player. I have a Creative Zen Micro about a year old (or more?).
Does anyone subscribe and download podcasts to the Zen Micro that can post a How To? I open the Creative MediaSource Tool and can see the podcasts I want to sync to my mp3 in the "now playing" window but don't know how to get them to upload to the mp3.
Thanks for any help.

Creative Zen Micro AND using M

Hi,
I'm a pc user at home and I am considering purchasing a Creative Zen Micro mp3 player.
I was wondering, am I able to put data files onto the mp3 player, then access them at Uni'versity where I use a Mac computer. I heard this was a Windows only product.
I want to easily plug in the USB cable to the Mac computers at Uni then access them easily without having to install any extra software so its able to read it (i.e. Plug N Play)
Thanks

thanks for the info,
BUT
what i really wanna know for 00% sure is that I can plug in my Creative Zen Micro mp3 player into a Mac WITHOUT installing ANY software and that the Mac will read the device for Data NOT music, since I only need the mac to read it so I can transfer data files from home to uni'versity
plz let me know, thanks!

Creative zen micro and

I have windows xp with sp2. And my windows not detect the zen micro and nothing. I have proved with 2 cable, and I have 4 usb but dont detect. What can i do? I prove install all.
Help please
PW: perdon for my english, xD

Is this after a firmware upgrade on the micro? I had the same. try the solution on this thread http://forums.creative.com/creativel...d=23698#M23698 or if possible try installing the driver on another computer and see if that recognises it.

Creative Zen Micro and OG

Hi,
can anyone tell me if Creative plans to bring out a new firmware for the Zen Micro to play also OGG Files ?
thx, Jerome

Creative don't tend to give future plans (see the?BEFORE you post, READ THIS FIRST (FAQ) post). There are no plans that we know of, and I think it's unlikely.

I need to install my creative zen micro and i dont know how

hi i was wondering if anybody knows how i can install my zen micro...i have just got a new computer and have lost my installation cd so i was thinking sombody might know where i could download the software i need...
cheers chris

I don't see the driver installation for the Zen MicroPhoto. I see a firmware update and three applications. There are no drivers on the download page. Is the driver included in one of the pieces of software?

Windows vista Dosent reconize my Creative zen micro and i deleted the firmware PLEASE H

hi
i got a new comp. and it didnt reconized
my creative
so i deleted the firmware (smart me) and now when i try to reaload it It dosent recoinze that my creative is connected
and my new comp is windows vista theres no frimwzre for vista
i've tried to instal the firm ware to my crteati've by cheaking windows xp
insted of windows vista 32 bit cuz they only have diri'vers
thax for ur help
[img"]http://forums.creative.com/i/smilies/6x6_smiley-tongue.gif[/img] width="6" height="6">

Duplicate.
Jason

Creative Zen Micro dont work!

hello,
I have for some month the Creative Zen Micro and I enjoyed it.
But a week ago, suddenly its stop working, its showing "CREATIVE" and sometimes I successed to enter a RECOVER MODE, I choosed every option from the menu and its didn't recoverd.
WHAT TO DO?!?!:manmad:

Popo,
If none of the options in Recovery Mode help, then it's likely there's a problem with the player. If you can get it to be recognised on the PC, try loading a firmware update onto it. Otherwise I would recommend you contact Customer Support, as you may need to get the player replaced.
Cat

Creative Zen Micro... What could it

Hello,
When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
-I reinstalled all the original software, still no go
-I reinstalled the original software and upgraded to the latest manually, still no go
-I reinstalled all my USB port drivers, still no go
-I cleaned and formatted the player under Recovery Mode, still no go
All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
Any help would be GREATLY appreciated.
Thanks in advance,
Jason

Alas!
I got it to work!
Here's how I fixed it ( in case anyone else has this problem )
-I connected the player to another computer in the house.
DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
-I installed the software.
Note: The computer did NOT have a previous version of the software installed at all, ever.
My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
-Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

Creative ZEN Micro won update firmware

I have Creative ZEN Micro and i cant get it to update i do everything right but it doesnt have enought battery power. and i cant get it to charge. so wat do i do

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro 4GB isn't recognized on my PC

Hello,
I bought a Creative Zen Micro 4GB?couple of years ago (3-4 years ago) and lost it year ago. I found it now and wanted to start using it but I have a problem. I bought a new laptop which is Vista and my pc doesn't recognize the player when I plug it in. It recognizes it and the bubble comes up at the tray, but it doesnt recognize it and says it can't find the driver and that I need to install the driver. However, since my pc can't recognize it, I can't install a driver or do anything with it since it isn't recognized by my pc. I read lots of posts and solutions to them, but none of them help my problem. In the device manager, it is apperead with a yellow explanation mark but I can't reinstall the driver. I also tried the cleanup and reboot but that also didn't work. Can anyone help me? (I also tried this on my old pc which has XP but it had the same problem.) My Pc is Windows Vist 32-Bit Operating System and Service Pack . By the way, when i plug in my zen micro, the window comes saying 'found new hardware' and I am suposed to locate a place for the dri've and it says i should insert the disc that came with it. However, when i insert it nothing happens and in the end it says it failed. I really need urgent help. Thank you in advance already.

Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
Welcome to Creative forums!
You may want to check out this threads for resolution on your issue:
CREATIVE ZEN MICRO and WINDOWS VISTA
Zen Micro and Windows Vista
Windows Vista / Zen Micro

Creative Zen Micro 4GB:HEL

is there like any way i can turn on the speaker mode?

Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
Welcome to Creative forums!
You may want to check out this threads for resolution on your issue:
CREATIVE ZEN MICRO and WINDOWS VISTA
Zen Micro and Windows Vista
Windows Vista / Zen Micro

Creative Zen Micro: Driver problems and mo

Hello, hope somebody can help me out a bit here.
My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
Any thoughts?

Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Creative Zen Micro - All time Recovery Mode( Firmware probl

Good. Staff, my Creative Zen Micro does not give to come back toward the normal version Firmware, appears recoverymode and he never leaves you give, says that he has a problem in the Firmware. They help me

My version is : 2.2.02_0.00.65 , and i not can feedback the firmware......says on the turn off, Firmware Problem, and he goes to Recovery Mode... Please help me

Creative Zen Micro and recovery m

Similar Messages

Maybe you are looking for