Creative Zen Micro CD Drivers LOST!!!

I lost my Creative Zen Micro CD for about one and a half year already. Is there anywhere I can download the Media Explorer or the Media Source Organizer? I have downloaded all the drivers and application from the zen micro download links however it doesn't work right. It says it can't detect the mp3 and i don't know what else to do. I really need it bad as i already haven't update my Zen Micro for about one and a half year for now. By the way, I know that I'm not the only one that needs it.
Thanks in advance!!

Updates on my Zen Micro. I tried to do different things with the player by going to recovery mode and accidentally, I press the reload firmware option. I thought that I can upgrade the firmware of my zen micro, however, when I ran the firmware installation i.e Creative Zen Micro PlaysForSure Firmware update 2.2.02 Filesize : 2.32 MB or Creative Zen Micro Firmware ..0 Filesize : 2.03 MB, it said that it could not detect the player, so, there is none firmware in my player. Please, what should I do.. Now, not only i cannot?synchronize my songs, plus, i cannot even listen to the music.

Similar Messages

Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

Help with my Bran-New Creative Zen Micro Photo. [Questi

<EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative Zen Micro won't turn

Creative Zen Micro -
When I plug the usb into a computer, it has the charge icon in the top right corner of the screen. If I attemp to turn it on, while plugged in, the creative sceen come on, and then dissapears. When it is not plugged into the computer, I get no repsponse what so ever. I haven't attmpted to reset it. Any ideas? Thanks for your time.

Try starting the player into Recovery Mode, see if that works:
<EM>Ensure that the Zen Micro is turned off.</EM>
<EM>Remove the battery.</EM>
<EM>Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. </EM>
<EM>The following options will be displayed:</EM>
<EM>) Clean Up (Performs a disk scan on the players harddisk)</EM>
<EM>2) Format All (Formats the players harddisk - Note: all contents will be lost)</EM>
<EM>3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC</EM>
<EM>4) Reboot (Reboots the device).</EM>
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro Software Iss

I've had my Creative Zen Micro for almost a year now, and I installed the software on my computer. But a couple weeks ago, my family bought a new computer. I've lost the cd to install the zen organizer and I was wondering what I could do?
Am I out of luck? Or is there software I can download to get it on the new computer.
You can send comments to [email][email protected]][email protected][/url]
Thanks so much.
*popsicle*

Go to Support-> Downloads, and in the list, select your player (MP3 Players, Zen, Zen Micro). Click on Next, then click on Go. Then download these files, and install them in this order:
<TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD vAlign=top align=right><FONT color=#330099 size=>. </TD>
<TD height=5><FONT color=blue>Creative Zen and Jukebox Driver Upgrade version .30.03 (<FONT color=#222222 size=><B>.3 MB</B>) </TD></TR></TBODY></TABLE>
<TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD vAlign=top align=right><FONT color=#330099 size=>5. </TD>
<TD height=5><FONT color=blue>Creative MediaSource Player/Organizer 3.30.2 (<FONT color=#222222 size=><B>52.2 MB</B>) </TD></TR></TBODY></TABLE>
<TABLE id=Table2 cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD vAlign=top align=right><FONT color=#330099 size=>3. </TD>
<TD height=5><FONT color=blue>Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource (<FONT color=#222222 size=><B>9.72 MB</B>) </TD></TR></TBODY></TABLE>
Cat
Message Edited by Catherina-CL on 09-2-2006 0:24 AM

Having big problems with Creative Zen Micro Photo!! I need much urgent help!

Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

CREATIVE ZEN MICRO and WINDOWS VI

I hope this question has not been repeated.
I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
How can I make this product work with my Windows Vista 32-bit computer ?
Thank you !!!

Robby & Lizzy
First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
Now for an outline of the necessary ste
ps.
Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
Connect the player to the system with a USB cable and execute the program.
When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
RobbyBobson wrote:
Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

Creative zen micro. h

I am trying to install my creative zen micro witout the cd by downloading the drivers and when I go to install it tells me that i have an error and to come to support and quote "l-00" , can any body help me?

andy23 wrote:I am trying to install my creative zen micro witout the cd by downloading the drivers and when I go to install it tells me that i have an error and to come to support and quote "l-00" , can any body help me?
If you are getting errors when installing this suggests a problem with the Windows install. Have you tried the install CD?

Creative Zen Micro: Driver problems and mo

Hello, hope somebody can help me out a bit here.
My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
Any thoughts?

Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Creative zen micro software d

yeah my creative zen micro came with the disk to install the thing onto the computer but its cracked and will not work. What should i do know how do i put songs onto it without having it installed on my computer, and can i get a new disk from creative? also a buddy of mine has a creative zen touch and if i used that disk and put it on my computer would it work with the zen micro? Thanks.

All the files you need that were on the disk can be found at http://www.nomadworld.com/downloads/drivers/

Creative Zen Micro 4GB isn't recognized on my PC

Hello,
I bought a Creative Zen Micro 4GB?couple of years ago (3-4 years ago) and lost it year ago. I found it now and wanted to start using it but I have a problem. I bought a new laptop which is Vista and my pc doesn't recognize the player when I plug it in. It recognizes it and the bubble comes up at the tray, but it doesnt recognize it and says it can't find the driver and that I need to install the driver. However, since my pc can't recognize it, I can't install a driver or do anything with it since it isn't recognized by my pc. I read lots of posts and solutions to them, but none of them help my problem. In the device manager, it is apperead with a yellow explanation mark but I can't reinstall the driver. I also tried the cleanup and reboot but that also didn't work. Can anyone help me? (I also tried this on my old pc which has XP but it had the same problem.) My Pc is Windows Vist 32-Bit Operating System and Service Pack . By the way, when i plug in my zen micro, the window comes saying 'found new hardware' and I am suposed to locate a place for the dri've and it says i should insert the disc that came with it. However, when i insert it nothing happens and in the end it says it failed. I really need urgent help. Thank you in advance already.

Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
Welcome to Creative forums!
You may want to check out this threads for resolution on your issue:
CREATIVE ZEN MICRO and WINDOWS VISTA
Zen Micro and Windows Vista
Windows Vista / Zen Micro

Creative Zen Micro Probl

Hi,My Creative zen Micro is not coming up as a removable dri've, yesterday when plugged into the USB is came up with found new hardware, but now nothing. I downloaded the drivers but nothing works. I can't update the firmware on it, because it isn't recognised. The USB cable works fine because it charged the mp3 player - Any ideas?

I've got the same problem, I tried to upgrade the firmware, and after my pc didn't recognise the zen micro anymore, I can't do anything with it anymore...
hope the support can help me solve this, anyone has any ideas? or has solved this before?
thx
duck

Creative Zen Micro... What could it

Hello,
When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
-I reinstalled all the original software, still no go
-I reinstalled the original software and upgraded to the latest manually, still no go
-I reinstalled all my USB port drivers, still no go
-I cleaned and formatted the player under Recovery Mode, still no go
All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
Any help would be GREATLY appreciated.
Thanks in advance,
Jason

Alas!
I got it to work!
Here's how I fixed it ( in case anyone else has this problem )
-I connected the player to another computer in the house.
DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
-I installed the software.
Note: The computer did NOT have a previous version of the software installed at all, ever.
My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
-Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
<i>. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 </i>
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
<i>with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.</i>

Creative Zen Micro CD Drivers LOST!!!

Similar Messages

Maybe you are looking for