Creative Zen Micro Firmware 1.02

Anyone update to this version?
After the nightmare I had going from .0.03 to 2.00.2 and then having to go back to .0.03 to get functionality back, I am a little nervous about going to .02.05 (not reversable)and not being able to go back to .0.03 if I meet the same fate as I did with 2.00.2

i have this firmware it it works perfectly

Similar Messages

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Creative Zen Micro Firmware Prob

So I've got a Zen Micro bout a year or two back and it stopped working a whle back.
It turns on fine but used to make a buzzing sound and?freeze. It had a small box with?'Firmware Problem' written on the screen.
Lately, it still makes the?buzzing sound but freezes on the Creative Logo screen.
I've tried to renew the Firmware and I tried the recovery tool thing, but neither worked.
Is there any way to fix it's Or is it totaly gone?
Thanks in advance.

Did the firmware problem happen during a firmware update, or did it just happen all of a sudden, and if so how?
to re-load the firmware, download the latest firmware on a Windows XP machine, go to control panel, tne add/remove programs, look for windows media player and if its there click on remove, you should see a window saying something along the lines of windows media player rollback.
Next lok for something called ( or somethg like)windows media player runtime, and remove that ( it may show the roll back screen again, continue, and complete the process)
re-start windows
Plug in your Creative MP3 player via USB connect it to a chharger ( if it uses/can use an external charger) and let it go to 'rescue mode'
Click on the firmware update, and when it asks you what language, highlight re-load OS ( or firmware) in recovery mode on your player.
As soon as the screen on your player prompts you to re-load firmware, click on your language choice on the P.C upgrade window.
If there is no language option, then get ready to select re-load OS on your player when the update starts on your P.C.
This only works with XP
If the above doesnt work:
Did the firmware error occur as a result of an attemtp to upgrade the formware to a plays for sure version?
Is the player regognised by your P.C running windows XP? ( go to control panel then hardware, then device manager?
This is what happened when i tried to upgrade ther firmware on my Zen xtra, what i did to fix it was based on what other people had tried on various other creative playerws such as the touch/micro/vision etc
see hereMessage Edited by Rich_T on 06-2-20070:23 AM

Creative Zen Micro Firmware problem: "Device not connected, please connect your devi

After an exhausti've search, I've found the fix for losing your firmware and not being able to update it via download from the creative.com. To explain my problem, I had issues with my device connectivity, so I tried to option of reloadinging my firmware via Recovery Mode (option 3, 'Reload Firmware'). After selecting this option, I tried to download and update my firmware via the creative.com website. The module to update my firmware displayed the error message "Device not connected, please connect your device." After about 2 hours of trying various suggested fixes, I found a relati'vely easy fix by running together various suggestions I found for other problems. First rollback your Windows Media Player (WMP) via the instructions found on this page: http://www.auditmypc.com/uninstall-m...layer0beta.asp. Restart your computer after rolling back WMP.
When your compter restarts, insert the "playsforsure" CD labeled "Easy Start CD." Follow the directions for reinstalling WMP. After WMP is reinstalled, restart again. When the computer restarts, return to the CD and follow the directions in the prompt. Reconnect your device when prompted. Once you reconnect your device, it may not function right away. If this is the case, go to the 'Start' button, under 'Control Pannel,' select 'System.' Under 'System' select 'Hardware' and then 'Device Manager.' Find your portable device under 'Uni'versal Serial Bus controllers.' Click on your device and select 'Uninstall' from the small icons at the top of the window. When this is completed, unplug and plug your device back in. After this is done, click on 'Scan for hardware changes,' also a small icon at the top of the window. If your device had the problem mine did, it should now be recognized. Go back to the Creative website and download the latest firmware. The module should now find your player without any problems.
The only thing I can figure is that the "playsforsure Easy Start CD" must have a device driver that solves the problem that you can't find anywhere else. I hope this helps someone out there (tech support was telling me that I was going to have to ship my device back to the company I bought it from to get it exchanged...which would have taken at least a month, I'm sure). Good luck to you all.

For all of you non-technical Micro owners:
I found a fix for this that I hope will help others out.
When I want to Sync tracks to My Zen using Yahoo Jukebox or WMP, I simply reboot my machine with the device PLUGGED IN. After Windows starts up, my applications recognize that the Zen Micro is connected. Good Luck.

Creative Zen Micro firmware probl

Hello,?I have at zen micro mp3 player and every time when I turn it on I'm getting firmware problem message. I can't turn it off and it just dies out when the battery is gone. I tried to plug it in my computer to upgrade the firmware but it doesn't detect the mp3 player or it doesn't take me to the recovery mode.When I turn it on I hear the clicking noise like the hard dri've is running. Any help will greatly appreciated. Thanks in advance.

Hi, looks like there is a problem during the boot, so i think that is a problem with a internal component. It can be the hard dri've although if you hear it, but i think it's another component (more serious).... You can see here ( http://www.hardwarezone.com/articles...d=33&cid=9&pg= ) how to open your zen and maybe try another HD, but do it only if you think you can put it back together. , but be careful ! If you are interested i can buy yours (low price ) for spare pieces to repair mine... Send a mail to [url=mailto:[email protected]">franck_boute [email protected][/url] ! Thanks Franck

Another question about the Zen Micro Firmware Upgr

Hi there,
I have just successfully installed the Creative Zen Micro Firmware .02.05 on my 5GB Zen Micro but I have a question regarding Windows Media Player. The Set up Sync button and some of the properties still appeared greyed out. I thought the upgrade would solve that problem.
Any thoughts?
C.

As per the?BEFORE you post, READ THIS FIRST (FAQ) post, all downloads can be found at Nomadworld.com downloads.

Zen Micro Firmware 1.10.02 to 1.11.01 (issue with instructio

This may seem a little picky. I had previously updated my Zen Micro to firmware .0.02. Now Creative has issues firmware ..0. All fine but my question is:
The applicability instructions for ..0 state:
align=left>You can upgrade from Creative Zen Micro firmware .02.05 or earlier, or Zen Micro
align=left>PlaysForSure? firmware 2.00.2 or later.
So technically I cannot update from .0 to .. Does anyone know if there is a technical reasion or just an oversite in the instructions?
Regards
JoRoFo

It's a bit of an oversight. Creative had actually removed .0.02 from the website just days after it was released because we, the users, found it to be severely flawed. Those instructions were written as though it was never released.
You can update to ..0 from .0.02 without a problem.Message Edited by dingus on 08-8-2005 06:08 AM

Creative Zen Micro CD Drivers LOST!!!

I lost my Creative Zen Micro CD for about one and a half year already. Is there anywhere I can download the Media Explorer or the Media Source Organizer? I have downloaded all the drivers and application from the zen micro download links however it doesn't work right. It says it can't detect the mp3 and i don't know what else to do. I really need it bad as i already haven't update my Zen Micro for about one and a half year for now. By the way, I know that I'm not the only one that needs it.
Thanks in advance!!

Updates on my Zen Micro. I tried to do different things with the player by going to recovery mode and accidentally, I press the reload firmware option. I thought that I can upgrade the firmware of my zen micro, however, when I ran the firmware installation i.e Creative Zen Micro PlaysForSure Firmware update 2.2.02 Filesize : 2.32 MB or Creative Zen Micro Firmware ..0 Filesize : 2.03 MB, it said that it could not detect the player, so, there is none firmware in my player. Please, what should I do.. Now, not only i cannot?synchronize my songs, plus, i cannot even listen to the music.

Zen Micro Firmware 2.00.12 not list

I got FW v2.00.2 loaded up on my micro. If I wanted to update to a non-beta MTP firmware, which one should I go with?
I'm guessing there isn't any firmware that matches my needs, is there? The download page only lists:
Creative Zen Micro Firmware .02.05 (2.0 MB)
Creative Zen Micro PlaysForSure Firmware 2..02 Beta Release (2.33 MB)

So I'm pretty much stuck with the one I got (ghost lines in volume meter and faulty "Lookup artist" function), right? And why isn't v2.00.2 listed anymore? Maybe to avoid confusion? What if someone was looking for the same as me? v2.00.2 is the version for them!Message Edited by noroom on 03-23-2005 09:9 AM

noroom,
Firmware version .02.05 is a PDE firmware and not a MTP firmware. Also, note that if you wanted to update to version .02.05, you will not be able to downgrade to MTP version 2.00.2 after that but you can go to the beta MTP version 2..02.
Jason

Creative Zen Micro - All time Recovery Mode( Firmware probl

Good. Staff, my Creative Zen Micro does not give to come back toward the normal version Firmware, appears recoverymode and he never leaves you give, says that he has a problem in the Firmware. They help me

My version is : 2.2.02_0.00.65 , and i not can feedback the firmware......says on the turn off, Firmware Problem, and he goes to Recovery Mode... Please help me

Creative ZEN Micro won update firmware

I have Creative ZEN Micro and i cant get it to update i do everything right but it doesnt have enought battery power. and i cant get it to charge. so wat do i do

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Help with my Bran-New Creative Zen Micro Photo. [Questi

If you don't want to see the backing of my whole story skip to the bold print at the bottom!I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Creative zen micro please help me

ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
this is the 3rd time i posted bout this
NOW WHAT DO I DO? please please please help...
ps sorry for the bad grammer and spelling

I just received the same problem,how do I fix it's

My Creative Zen Micro Needs H

Ok so heres my story, I bought this Black Creative Zen Micro about years ago, Its always worked great for me and never had a problem, then about 2 weeks ago, I wanted to put some somgs on it and when i plugged it into the computer nothing happened? The creative zen was charging but my computer didnted reconize it, so i went into the recovery mode and i Cleaned it up then i formatted it than I Reloaded the firmware, and rebooted. Then on startup it said firmware problem? so i tried to update the firmware but i got this error saying please connect your player, or something like that how can i get it so it connnects?

gerdes wrote:
whats an ac charger? LOL
An external charger that plugs into the wall.

Creative Zen Micro Firmware 1.02

Similar Messages

Maybe you are looking for