Creative Zen Micro(Original) Firmwar

Alright, well I've had this product for about 2-3 years now. It's worked until this point, I wanted to erase everything off of it. So I went into recovery mode. I accidently select reload firmware and now it's messed up. I've been looking around trying to download the firmware and putting it on there again. But, I open up the firmware upgrade. All it gives me "Your player is not connected, please connect your player". It is connected, just charging. I lost my cd. Don't know how to connect the player to my computer. Help?

PhoniexBoy wrote:
The same thing happened to me, except my songs were starting to mess up and so went to the Creative thing for the Zen and reformatted my Zen micro photo 8 g. Well after that the zen froze up at the Creative logo, so i tried formatting again from the recovery menu, and it didnt do anything, after that I realized i hadnt updated my firmware since i got in in like 2006, and that may be the problem. If you know of anything to help, your kindness would be gratefully appreciated.
Does your computer recognize the player? Have you got it to go beyond the Creative screen. Did you do cleanup >reboot after formatting player. If not then do that. Don't even think about firmware update until the computer will recognize it. Firmware update for the player can ONLY be done a computer running Xp with WMP0. Your hardri've may be failing so firmware update won't help that. If the player won't finish the scan disk & rebuilding library after the cleanup >reboot then it's a clear sign of failing or failed hardri've.

Similar Messages

Zen Micro PlaysForSure firmware upgrade fatal error - RESOL

First, sorry about poor english!
When i tried to upgrade my Zen Micro to the latest firmware i got the following message: "Creative Zen Micro PlaysForSure Firmware Upgrade: This application only supports Windows XP platform with at least Service Pack installed." The executable name was: ZenMicroP4S_PCFW_L6_2_2_02.exe and yes i have Windows XP SP2 installed on my computer. (and on the other three computers, where i got the exact error message.)Message Edited by kaszast on 0-26-2006 08:37 AM

Dear Creative!
You screwed the upgrade program a bit, because it is works ONLY IN ENGLISH version on Windows XP. Shame! You are pushing me into the sea of warez...

Creative Zen Micro CD Drivers LOST!!!

I lost my Creative Zen Micro CD for about one and a half year already. Is there anywhere I can download the Media Explorer or the Media Source Organizer? I have downloaded all the drivers and application from the zen micro download links however it doesn't work right. It says it can't detect the mp3 and i don't know what else to do. I really need it bad as i already haven't update my Zen Micro for about one and a half year for now. By the way, I know that I'm not the only one that needs it.
Thanks in advance!!

Updates on my Zen Micro. I tried to do different things with the player by going to recovery mode and accidentally, I press the reload firmware option. I thought that I can upgrade the firmware of my zen micro, however, when I ran the firmware installation i.e Creative Zen Micro PlaysForSure Firmware update 2.2.02 Filesize : 2.32 MB or Creative Zen Micro Firmware ..0 Filesize : 2.03 MB, it said that it could not detect the player, so, there is none firmware in my player. Please, what should I do.. Now, not only i cannot?synchronize my songs, plus, i cannot even listen to the music.

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Creative Zen Micro - All time Recovery Mode( Firmware probl

Good. Staff, my Creative Zen Micro does not give to come back toward the normal version Firmware, appears recoverymode and he never leaves you give, says that he has a problem in the Firmware. They help me

My version is : 2.2.02_0.00.65 , and i not can feedback the firmware......says on the turn off, Firmware Problem, and he goes to Recovery Mode... Please help me

Creative ZEN Micro won update firmware

I have Creative ZEN Micro and i cant get it to update i do everything right but it doesnt have enought battery power. and i cant get it to charge. so wat do i do

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro 5GB: Freezing on transfers & during playback (Please He

Ok, Here is a problem I am having.
My Zen is freezing no matter what program i use to place music on it.
The transfer will begin and rarely get or 2 songs on but more often it will reach about 30% on the first song, freeze and remain here till i unplug it and go into recovery mode by taking the battery out.
THINGS I HAVE TRIED:
*Changing the firmware (at least 0 times for each firmware available on this site)
*Formatting & Defragging (Don't even get me started how many times)
*Using different software (WMP0, Creative Sync and Every other one included with Creative Zen Micro Explorer)
*Upgrading software
Now i am a qualified electronic repairer and i have dismantled my zen and a friends (whom dropped it and bought a new one) i have from here changed the hard dri've thinking this may be the source of the problem (yes i am aware the warranty is void now but when i placed the battery in the first time i got it the sticker broke) This has done nothing so i have placed the original HD back in.
I have NO idea what to do now!
I can not afford a new mp3 player, have no warranty YET i do have the ability to repair this by myself.
If anyone has ANY suggestions whatsoever i am willing to try them, of course still sensible.
Please PLEASE PLEASE! help me out. i will be gratefully for any help i can get.
-Norb

/being venting
Why does Creative make it so easy to Reload the firmware, and why do soo many people choose this option!?!?!?
/end venting
pdk, your task now is to get your computer to recognize your player. I have a feeling that you are using a v2 firmware. Do you see the words MTP Device anywhere when you connect the player to your computer? If so then follow the steps listed <a href='http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#228' target=_blank>here[/url]. Then use the firmware provided on your CD and see if it can recognize your player. You might have problems since you choose the Reload firmare option in Recovery Mode.

Creative Zen Micro... What could it

Hello,
When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
-I reinstalled all the original software, still no go
-I reinstalled the original software and upgraded to the latest manually, still no go
-I reinstalled all my USB port drivers, still no go
-I cleaned and formatted the player under Recovery Mode, still no go
All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
Any help would be GREATLY appreciated.
Thanks in advance,
Jason

Alas!
I got it to work!
Here's how I fixed it ( in case anyone else has this problem )
-I connected the player to another computer in the house.
DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
-I installed the software.
Note: The computer did NOT have a previous version of the software installed at all, ever.
My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
-Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

Creative Zen Micro (Startup Failure) Need URGENT he

Hi, i was on holiday in Singapore about 2 weeks ago, and i bought myself a Creative Zen Micro from one of the local sho
ps.
It worked fine, music played brilliantly, i was happy. However, today when i turned it on, it would display the 'CREATIVE COPYRIGHT' Screen, then followed by 'CREATIVE' in large letters across the screen. It would then freeze on this screen, and the off/on button would soon become useless, which meant that i could either leave it on and kill the battery, or take it out.
When i took the battery out and in again, it would repeat with the 'CREATIVE' sign. Following the 'recovery' methods, i managed to load the screen with all the different options such as clean-up, etc etc. However, when i load any of them up, it would freeze once again and i would end up taking the battery out again.
I have tried the reset button with a pin but that doesnt do anything. I have a spare battery that does exactly the same too. My computer doesnt detect the Zen btw.
I have important documents and almost my lifetime's supply of music that took me almost weeks to rip and store into that Zen. Now that its basically dead, and i bought it in Singapore, i have basically no warranty, i feel as if i have been throwing cases of money into the toilet. I need urgent help, if theres any other ways of restoring access to my Zen.
Check the reviews on a respectable site like amazon.com: http://www.amazon.co.uk/Creative-Zen-Micro-6GB-Player/dp/B000AMR76S
After browsing around forums over the internet, I have found many other people complaining about this, which makes it a MAJOR flaw in the Creative Zens. Screw petty chargers and plugs, get the software right.

The problem you have is very simple, yet complicated to be solved. Your zen's hard dri've is dead. Most of the people who own a zen don't know it has a hard dri've inside. Some mp3 players have flash memory. Chances are that you've dropped your mp3 player. Zen's hard dri'ves are very sensiti've and must not be moved around too much. The way to go in this case is to replace the hard dri've. It is actually a micro hard dri've what you need. Seagate ST 5GB MicroDri've CF Type II. Once you have a new Hd installed you can format it using the zen's menu (remove the battery, hold the power button, place the battery in and wait untill you see the menu) This requires some experience formatting HD's and installing firmware. There is another option. You can buy a Patriot 4Gb Compact Flash Card, and follow what I've described above. The good thing about this is that your zen will take more vibration than the original. The bad one is tha those range from $70 - 99. I hope this hel
ps.

Creative Zen Micro Not compatible with Windows Vi

My daughter has a Creative Zen Micro MP3 player, no video feature, just the the music player. She recently got a new computer that runs Windows Vista. She tried to install the program on her new computer, and it said the software was not compatible with Windows Vista. Does that mean I need to get new software from Creative Zen? to use the program on The computer running?Windows Vista? Any help would be appreciated..

The software that came on the original CD is not supported on vista.
The Zen Micro will work nati'vely with Vista if it contains the latest firmware version. If the Zen Micro isn't being recognized by Vista then you will need to use an older system (windows xp) to upgrade the firmware on the Zen Micro. Once Vista recognizes the Zen Micro you should be able to download Vista compatable versions of the software for the device from the creative website.

Help with my Bran-New Creative Zen Micro Photo. [Questi

If you don't want to see the backing of my whole story skip to the bold print at the bottom!I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Creative zen micro please help me

ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
this is the 3rd time i posted bout this
NOW WHAT DO I DO? please please please help...
ps sorry for the bad grammer and spelling

I just received the same problem,how do I fix it's

My Creative Zen Micro Needs H

Ok so heres my story, I bought this Black Creative Zen Micro about years ago, Its always worked great for me and never had a problem, then about 2 weeks ago, I wanted to put some somgs on it and when i plugged it into the computer nothing happened? The creative zen was charging but my computer didnted reconize it, so i went into the recovery mode and i Cleaned it up then i formatted it than I Reloaded the firmware, and rebooted. Then on startup it said firmware problem? so i tried to update the firmware but i got this error saying please connect your player, or something like that how can i get it so it connnects?

gerdes wrote:
whats an ac charger? LOL
An external charger that plugs into the wall.

Creative Zen Micro won't turn

Creative Zen Micro -
When I plug the usb into a computer, it has the charge icon in the top right corner of the screen. If I attemp to turn it on, while plugged in, the creative sceen come on, and then dissapears. When it is not plugged into the computer, I get no repsponse what so ever. I haven't attmpted to reset it. Any ideas? Thanks for your time.

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro(Original) Firmwar

Similar Messages

Maybe you are looking for