Creative Zen Micro Problems Par

I have done a lot of research into the problems I have been experiencing with my new Zen Micro as detailed last night. It would appear that this is a common problem with a number of disgruntled users. I bought my player for ?200 to use with the Napster to go service and from the very beginning I have had nothing but hassle. I have contacted both Napster and Creative Customer Support but so far have heard nothing from them. I have spent the last 3 days formatting my hard dri've, trying 3 or 4 different USB connectors, Reinstalling the software provided about 30 times, reinstalling Napster, Reinstalling Windows Media Player 0 and I have even tried every single option in the players recovery mode. What a mistake the last thing was I deleted the firmware and even though I have downloaded replacement firmware I am unable to install it on my player because despite all the actions I have taken above my Micro is still not being recognised by my computer. I have been through Napster, Zen Micro Media Explorer and Windows Media Player and all I get is a message saying there is no device connected. An absolute disgrace!!! I will await a response from Napster and Creative with interest and will give them a chance to redeem themselves however I am growing angrier and angrier by the moment because of this ridiculous situation!!!!!!!

It would have been better to keep the problem within your previous thread.
Ewan977 wrote:
I have spent the last 3 days formatting my hard dri've, trying 3 or 4 different USB connectors,
Do you mean USB cards or cables? If cards, what cards have you tried and what chipsets do they have?
Reinstalling the software provided about 30 times, reinstalling Napster, Reinstalling Windows Media Player 0 and I have even tried every single option in the players recovery mode.
If the problem is with the USB compatibility with the player, reinstalling the software won't help unfortunately...
What a mistake the last thing was I deleted the firmware and even though I have downloaded replacement firmware I am unable to install it on my player because despite all the actions I have taken above my Micro is still not being recognised by my computer.
Deleting the firmare does seem to cause a serious issue as it seems to be very difficult for the player to be recognised by the PC afterwards, or at least by the firmware update program. If you couldn't get the player to be recognised beforehand though then chances are it still won't recognise it. Are you able to connect to say a friend's PC and run the update from there? Make sure to install the drivers on your friend's PC first, and they will need to have both Win XP and WMP0.

Similar Messages

Creative Zen Micro problem! PLEASE HELP

can anyone help me please?
I am on my 3rd replacement for my Zen Micro. I have had problems with switching my Zen on and for it to even attempt to function properly. I turn on my Zen and once the screen turns back to the song that i was playing when i previously turned it off, it plays about 2 seconds of the song and then releases an unpleasant high pitched drone in my ears. This happens 9 times out of 0 whenever i switch on my Zen.
I am doing nothing different whatsoever, other than listening to it throughout the day. It still has 4GB left! I really am very upset about it all.
This is now getting ridiculous. I have rebooted it, uploaded firmware, formatted my Zen and wiped it then put all of the music back on, "cleaned it up" and still i have problems. I am VERY angry, frustrated and completely disappointed in this product. I have never found so many problems with a product!
Please let me know what can be done.
I have emailed Creative Support 4 times in the past week and i have had nothing in return. I need a new player as i use it every day. I cant get a refund (i dont think) because it was a gift and my dad bought it online. I just want a working Creative mp3 player.
Thanks!

It sounds like you've tried everything as far as troubleshooting goes (updating firmware, the options in Recovery Mode). Unfortunately it does look like there is a problem with your player then.
You didn't mention when you originally got the player (the first one, or your last replacement), but in any case it would be best to speak to Customer Support and outline the problems you've been having, and let them know you're not happy, to see what they can do for you.
Regarding e-mail, did you get an auto response back? If not, check your spam filter (if you have one), as you will always get an auto response back when you e-mail us or use the webform. If you did get the auto response, check over it, as usually you are meant to reply to it if the included basic tips don't help, so that someone will deal with your mail directly.
Cat

Creative zen micro problem

I have had my creative zen 4 a year now,nothing wrong and today wen i went to play my music and it totally froze on me ,it wouldnt play anything and worse it wouldnt shutdown,i've tried to reset it aswell it rebuilds the music library and the main menu works,bt i try to play music and it freezes completley. Is there anyone out there that can help me becoz i don't have the money to replace it at all.PLEASE HELP!

Are using a Zen micro? If so just remove the battery http://forums.creative.com/creativel...ap&thread.id=3 Do the Cleanup>Reboot thru recovery/rescue mode & DON'T choose reload firmware

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Having big problems with Creative Zen Micro Photo!! I need much urgent help!

Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

Problem with Creative Zen Micro software detecting certain C

Hi,
I hope someone can help me. I recently purchased a Creative Zen Micro MP3 player. So far, I have very few complaints, apart from the fact that while travelling on the bus, it won't seem to detect any radio stations.
The problem re: the software though is that it will only detect the last track on three of my CD's. None of these CD's are damaged in any way, but all are from the same record label. Anyway, I was wondering if anybody had any tips on how I might be able to transfer these albums onto my player?
Thanks a lot.

My zen micro problem:
Brief Problem description :.When I put a battery in the Zen micro, it automaticly turn on andshow "hardware problem" and freezed.2. If I connect to power adapter, i it automaticly turn on and show"hardware problem" and freezed.3. If I connect to my computer via usb cable, my computer can not findthe player and the player do not turn on even I switch on. As long asI put the battery in it, it automaticly turn on and show "hardwareproblem" and freezed. My computer still can not find it. I'm sure thecomputer and usb cable is working because all of my other device isworking ( include mouse, keyboard, logitech web camera, canon digitalcamera, samsung 52MB mp3). I try to take off all of theother usb equipements and the zen micro still not work. I can not rewrite the firmware because the zen micro freezed at"hardware problem" and my computer can not find it.
Help!!!!!!

Major audio problems with Creative Zen Micro 6Gb... need h

I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
-Bash

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Creative Zen Micro: Driver problems and mo

Hello, hope somebody can help me out a bit here.
My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
Any thoughts?

Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Problems with Creative zen Micro Pho

Hello.
Today my creative zen Micro Photo came.
Eeverything works, the software, the player, but i cant put files on it. Hes loading the battery if i take the player on my USB.
But the software (Zen Micro Photo Media Explorer) doesnt recognice the player, so what shall i do?
sorry for my mad englisch, im from germany

Have you tried going into Device Manager and updating the driver for the Micro? You don't actually have to install a driver update, you can just elect to use the driver that is already installed, and Windows will attempt to refresh the pairing between the installed driver and your specific player.

Creative Zen Micro Photo 8GB Driver Problem XP USB

Xp couldnt find driver to install for Creative Zen micro photo 8gb. I have P4 Xp sp2 USB .. It works fine with other.
But when i connect zen Micro Photo 8GB it says "Unknow device creative zen micro photo" the player doesnt come with any driver.
can you Please help me?
Is it something to do with firmware?

anant wrote:
Hi ted, can you tell me What is MTP device n wht its connection with WM0?please.. It will be a great help! ?
MTP is a protocol. For our purposes it means that the driver should be included with WMP0. (...and that is the connection, you get the driver by installing WMP0.)

Creative Zen micro charging problems......but a Mac co

Since I own a Mac. I wasn't able to upload the software 4 my Creative Zen micro. I use XNJB. I wuz using my comp. @ work to charge it, (It only charged once correctly @ home). But now it won't even charge @ work and it is completely drained. And since I was never able to upload the software, the terminology used in this forum is foreign to me.
There aren't any bars and it doesn't pulse glow.
Someone please help, I am soooooooo frustrated and would rather just take it back, but i'm over seas.
Jemimah

Kynaeus wrote:
and you won't get it to work for your Mac because it is not a compatible system, check the box.
Not quite true. Creative doesn't support it, but there is 3rd party software that allow Creative players to be used on a Mac, and plenty of people who do.

Help with my Bran-New Creative Zen Micro Photo. [Questi

If you don't want to see the backing of my whole story skip to the bold print at the bottom!I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative zen micro please help me

ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
this is the 3rd time i posted bout this
NOW WHAT DO I DO? please please please help...
ps sorry for the bad grammer and spelling

I just received the same problem,how do I fix it's

Creative Zen Micro Problems Par

Similar Messages

Maybe you are looking for