Creative Zen Micro's Removable Disk Quest

If I were to disconnect my wire when it tells me not to disconnect, will that cause problems in the future? I did it a few times at school and the computers won't allow to safely remove hardware. It seems to work fine, but are there side effects to this?

It shouldn't do any harm unless you break the connection while the player is the middle of a data transfer. If your school computers don't have an option to eject or safely remove hardware, another option might be to switch the player off before disconnecting the player.

Similar Messages

Creative Zen Micro Slow Removable d

I have the ZM 5GB and im very happy about it - except for one thing:
The removable disk is way to slow.
Firmware is ..0
My disk is formated to GB.
Using HD Tune for Windows XP i found the disk to have a transferrate of about 6-7 mb/s - which is ok.
USB 2.0 is way faster (480 Mbps).
But then i started actually transfering data. A file of 80 mb took my buddy Zen about 8 minuttes - that is ~300-400 kb/s.
(80mb/480s = 0,375 mb/s)
Is it my Micro or is something wrong with this player?
Thanks.
stefan_v

SSR wrote:
A speed of around 300kB/s suggests that it's running at USB speeds. Are you SURE you're connected to a USB2 port? Ignore the theoretical bandwidth speeds of USB2, they are never achieved. You'll be lucky to get 0+MB/s.
:-/ Now that i think about it... no. Its pretty new Dell Precision M20 laptop, but im not sure its all USB 2.0... Better try and find out...

Help with my Bran-New Creative Zen Micro Photo. [Questi

If you don't want to see the backing of my whole story skip to the bold print at the bottom!I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative Zen Micro Quest

I have a white 5 gig Zen Micro and i love it but...............can someone please tell me how you synch up with Microsoft Outlook.... so that i can use the calender, contacts, and to-do-list features...........also, i've tried going throught the zen micro media explorer but it always tells me the device is connected, although it is, why does this happen and does it have anything to do with me using the latest firmaware (Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 )...........help is appreciated.
Thank you.

big_d5,
If you had update the MTP firmware for the player, you will also need to update the Zen Micro Media Explorer to support the MTP version. Go to the driver page and look for this Zen Micro Media Explorer .00. for Creative Zen Micro (Software Update Package for Zen Micro Players with *PlaysForSure/MTP Firmware).
Jason

Creative Zen Micro won't turn

Creative Zen Micro -
When I plug the usb into a computer, it has the charge icon in the top right corner of the screen. If I attemp to turn it on, while plugged in, the creative sceen come on, and then dissapears. When it is not plugged into the computer, I get no repsponse what so ever. I haven't attmpted to reset it. Any ideas? Thanks for your time.

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro, Blank Scre

I purchased a Creative Zen Micro about 9 months ago. In the last maybe 3-4 months it's been randomly not showing a screen. It still plays music and i can still press the buttons, but the screen is blank. It didn't bother me that much because I could still figure out how to change it to another artist and all that. The screen would also randomly show up when I turned it on sometimes so it wasn't a big deal.
Now it's been a few weeks without a screen. I still wouldn't mind, except for the fact that it's somehow stuck in a list of about 5 random songs that it plays over and over. (And not my favorites haha) So yeah i'm getting pretty sick of it. I cant seem to figure out how to change the songs, or get the screen back. I've tried resetting by taking out the battery, and I'd assume if it were a battery problem then it just wouldnt work right?.. And I cant get into the recovery mode either without a screen. So can anyone help me with this? or should I talk to Creative about it ? Thanks!

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative ZEN Micro won update firmware

I have Creative ZEN Micro and i cant get it to update i do everything right but it doesnt have enought battery power. and i cant get it to charge. so wat do i do

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro: Error copying m

Hi,
My Creative Zen Micro is just a day old and after transferring 20 MP3s it says error on every following track i want to transfer.
The first 20 Songs were copied but then I cant transfer any more, no matter which one i choose.
can anybody help me with this problem?

Can you try a disk cleanup on the player. To run a Disk Cleanup you need to access the Rescue Mode on the Zen Micro. To access the Rescue Mode: remove the battery, hold the power switch to the "on" position and KEEP IT HELD TO "ON" while reinserting the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
Failing that, what firmware version are you using, and what software to copy?

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

CREATIVE ZEN MICRO and WINDOWS VI

I hope this question has not been repeated.
I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
How can I make this product work with my Windows Vista 32-bit computer ?
Thank you !!!

Robby & Lizzy
First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
Now for an outline of the necessary ste
ps.
Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
Connect the player to the system with a USB cable and execute the program.
When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
RobbyBobson wrote:
Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

Creative zen micro software d

yeah my creative zen micro came with the disk to install the thing onto the computer but its cracked and will not work. What should i do know how do i put songs onto it without having it installed on my computer, and can i get a new disk from creative? also a buddy of mine has a creative zen touch and if i used that disk and put it on my computer would it work with the zen micro? Thanks.

All the files you need that were on the disk can be found at http://www.nomadworld.com/downloads/drivers/

Creative Zen Micro - FM Radio Bro

Hi, I want to explain my bad experience with a Creative Zen Micro 6GB.
I bought it in late December 2005, and until now always worked fine.
Suddently, some days ago the Radio FM men? disappeared, as described in some other messages here in the forum. I've tryed to reset it, and to upgrade firmware again.
The upgrade procedure went fine, the reset/disk cleanup/format ecc. from Recovery Men? went fine too, but as final result the FM Radio doesn't work anymore at all.
Sometimes FM Radio men? appers, sometimes not (yes, randomly); moreover, when I try to enter FM Radio men?, the Creative Zen locks
I think I can't do anything else more, I already contacted Creative for support.
I already had nice experience with Creative support, so I don't worry too much; I'm just annoyed that a brand new product broke so soon...

just a straight stereo patch cable (like with the headphone jack on both ends)...from your player to the line in jack on your sound card. they are like 5 bucks at radio shackMessage Edited by flyer608 on 02-07-2005 2:50 AM

Creative Zen Micro Probl

Hi,My Creative zen Micro is not coming up as a removable dri've, yesterday when plugged into the USB is came up with found new hardware, but now nothing. I downloaded the drivers but nothing works. I can't update the firmware on it, because it isn't recognised. The USB cable works fine because it charged the mp3 player - Any ideas?

I've got the same problem, I tried to upgrade the firmware, and after my pc didn't recognise the zen micro anymore, I can't do anything with it anymore...
hope the support can help me solve this, anyone has any ideas? or has solved this before?
thx
duck

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Creative Zen Micro's Removable Disk Quest

Similar Messages

Maybe you are looking for