Creative Zen Micro (Startup Failure) Need URGENT he

Hi, i was on holiday in Singapore about 2 weeks ago, and i bought myself a Creative Zen Micro from one of the local sho
ps.
It worked fine, music played brilliantly, i was happy. However, today when i turned it on, it would display the 'CREATIVE COPYRIGHT' Screen, then followed by 'CREATIVE' in large letters across the screen. It would then freeze on this screen, and the off/on button would soon become useless, which meant that i could either leave it on and kill the battery, or take it out.
When i took the battery out and in again, it would repeat with the 'CREATIVE' sign. Following the 'recovery' methods, i managed to load the screen with all the different options such as clean-up, etc etc. However, when i load any of them up, it would freeze once again and i would end up taking the battery out again.
I have tried the reset button with a pin but that doesnt do anything. I have a spare battery that does exactly the same too. My computer doesnt detect the Zen btw.
I have important documents and almost my lifetime's supply of music that took me almost weeks to rip and store into that Zen. Now that its basically dead, and i bought it in Singapore, i have basically no warranty, i feel as if i have been throwing cases of money into the toilet. I need urgent help, if theres any other ways of restoring access to my Zen.
Check the reviews on a respectable site like amazon.com: http://www.amazon.co.uk/Creative-Zen-Micro-6GB-Player/dp/B000AMR76S
After browsing around forums over the internet, I have found many other people complaining about this, which makes it a MAJOR flaw in the Creative Zens. Screw petty chargers and plugs, get the software right.

The problem you have is very simple, yet complicated to be solved. Your zen's hard dri've is dead. Most of the people who own a zen don't know it has a hard dri've inside. Some mp3 players have flash memory. Chances are that you've dropped your mp3 player. Zen's hard dri'ves are very sensiti've and must not be moved around too much. The way to go in this case is to replace the hard dri've. It is actually a micro hard dri've what you need. Seagate ST 5GB MicroDri've CF Type II. Once you have a new Hd installed you can format it using the zen's menu (remove the battery, hold the power button, place the battery in and wait untill you see the menu) This requires some experience formatting HD's and installing firmware. There is another option. You can buy a Patriot 4Gb Compact Flash Card, and follow what I've described above. The good thing about this is that your zen will take more vibration than the original. The bad one is tha those range from $70 - 99. I hope this hel
ps.

Similar Messages

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • My Creative Zen Micro Needs H

    Ok so heres my story, I bought this Black Creative Zen Micro about years ago, Its always worked great for me and never had a problem, then about 2 weeks ago, I wanted to put some somgs on it and when i plugged it into the computer nothing happened? The creative zen was charging but my computer didnted reconize it, so i went into the recovery mode and i Cleaned it up then i formatted it than I Reloaded the firmware, and rebooted. Then on startup it said firmware problem? so i tried to update the firmware but i got this error saying please connect your player, or something like that how can i get it so it connnects?

    gerdes wrote:
    whats an ac charger? LOL
    An external charger that plugs into the wall.

  • Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

    Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

    I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

  • Major audio problems with Creative Zen Micro 6Gb... need h

    I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
    -Bash

    Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
    If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
    MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
    Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

  • Creative Zen Micro 4GB isn't recognized on my PC

    Hello,
    I bought a Creative Zen Micro 4GB?couple of years ago (3-4 years ago) and lost it year ago. I found it now and wanted to start using it but I have a problem. I bought a new laptop which is Vista and my pc doesn't recognize the player when I plug it in. It recognizes it and the bubble comes up at the tray, but it doesnt recognize it and says it can't find the driver and that I need to install the driver. However, since my pc can't recognize it, I can't install a driver or do anything with it since it isn't recognized by my pc. I read lots of posts and solutions to them, but none of them help my problem. In the device manager, it is apperead with a yellow explanation mark but I can't reinstall the driver. I also tried the cleanup and reboot but that also didn't work. Can anyone help me? (I also tried this on my old pc which has XP but it had the same problem.) My Pc is Windows Vist 32-Bit Operating System and Service Pack . By the way, when i plug in my zen micro, the window comes saying 'found new hardware' and I am suposed to locate a place for the dri've and it says i should insert the disc that came with it. However, when i insert it nothing happens and in the end it says it failed. I really need urgent help. Thank you in advance already.

    Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
    Welcome to Creative forums!
    You may want to check out this threads for resolution on your issue:
    CREATIVE ZEN MICRO and WINDOWS VISTA
    Zen Micro and Windows Vista
    Windows Vista / Zen Micro

  • CREATIVE ZEN MICRO and WINDOWS VI

    I hope this question has not been repeated.
    I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
    I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
    I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
    How can I make this product work with my Windows Vista 32-bit computer ?
    Thank you !!!

    Robby & Lizzy
    First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
    Now for an outline of the necessary ste
    ps.
    Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
    You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
    Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
    Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
    Connect the player to the system with a USB cable and execute the program.
    When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
    Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
    RobbyBobson wrote:
    Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

  • Creative Zen Micro AND using M

    Hi,
    I'm a pc user at home and I am considering purchasing a Creative Zen Micro mp3 player.
    I was wondering, am I able to put data files onto the mp3 player, then access them at Uni'versity where I use a Mac computer. I heard this was a Windows only product.
    I want to easily plug in the USB cable to the Mac computers at Uni then access them easily without having to install any extra software so its able to read it (i.e. Plug N Play)
    Thanks

    thanks for the info,
    BUT
    what i really wanna know for 00% sure is that I can plug in my Creative Zen Micro mp3 player into a Mac WITHOUT installing ANY software and that the Mac will read the device for Data NOT music, since I only need the mac to read it so I can transfer data files from home to uni'versity
    plz let me know, thanks!

  • Creative Zen Micro Photo Problem (Detecti

    BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
    HERE IS THE PROBLEM:
    YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

    I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
    I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
    If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
    Eric

  • From ipod or itunes to creative zen micro f

    dear friends
    i have bought a new creative zen micro photo mp3 player.
    until i used a ipod mini with the software itunes.
    now i want to pose the following queation
    is it possible, to get all the mp3's, which i have in my itunes library, to my new zen micro mp3-player?

    . If you have ripped the songs yourself in AAC-format: get the LAME-plugin for iTunes and rerip the music files in 92 or 256 MP3. Then you can just drag and drop the files from your iTunes Music-folder on to your player (if you have the new firmware installed?). Throw away your AAc-music files - you no longer need them.
    2. If you bought music in the iTunes Music Store: you create (maximum) 80 minutes long playlists and then burn them on to CD-Rs. Rip the CDs and proceed as above.
    3. If you acquired the music files in an - let?s blurt it out - illegal way, either do the right thing and throw the music files away right away, or buy the CDs and throw the illegal files, when you have ripped the CD in question. Then proceed as . above.
    Creatives answer to iTunes is MediaSource, a mediocre piece of software to beware of. Either buy Red Hats excellent sofware, or use the drag-and-drop method. Or use WinAMP with the Zen Plugin (there still is one, right?).

  • Zen Micro Startup Screen Chan

    I am curious abou this option but I can't access it. Is there a certain firmware I need to have or do I need pictures on there to change it's

    I don't think you can change the Zen Micro startup screen (yet?)

  • Creative zen micro software d

    yeah my creative zen micro came with the disk to install the thing onto the computer but its cracked and will not work. What should i do know how do i put songs onto it without having it installed on my computer, and can i get a new disk from creative? also a buddy of mine has a creative zen touch and if i used that disk and put it on my computer would it work with the zen micro? Thanks.

    All the files you need that were on the disk can be found at http://www.nomadworld.com/downloads/drivers/

  • Creative Zen Micro zCover C

    Hello. I was just wondering, could someone post pictures of, and tell me if the zCover case for the Creative Zen Micro has a screen protector? Please get pictures of the front, sides, top, bottem, and back, with the clip on and off. Thank you!

    just received the Zen Micro Leather Case...very nice...as indicated on the product page, there is a protecti've vinyl display...
    http://us.creative.com/products/product.asp?category=23&subcategory=27&product=5
    and the magnetic snap closure is a nice touch (puts no force on the Zen Micro to close like you would need for a snap button)...
    question: there is an opening at the bottom of the case...possibly for a lanyard? anyone seen one? looks like it may loop/fit inside the battery cover...

  • Creative Zen Micro dont work!

    hello,
    I have for some month the Creative Zen Micro and I enjoyed it.
    But a week ago, suddenly its stop working, its showing "CREATIVE" and sometimes I successed to enter a RECOVER MODE, I choosed every option from the menu and its didn't recoverd.
    WHAT TO DO?!?!:manmad:

    Popo,
    If none of the options in Recovery Mode help, then it's likely there's a problem with the player. If you can get it to be recognised on the PC, try loading a firmware update onto it. Otherwise I would recommend you contact Customer Support, as you may need to get the player replaced.
    Cat

  • Creative Zen Micro... What could it

    Hello,
    When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
    -I reinstalled all the original software, still no go
    -I reinstalled the original software and upgraded to the latest manually, still no go
    -I reinstalled all my USB port drivers, still no go
    -I cleaned and formatted the player under Recovery Mode, still no go
    All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
    Any help would be GREATLY appreciated.
    Thanks in advance,
    Jason

    Alas!
    I got it to work!
    Here's how I fixed it ( in case anyone else has this problem )
    -I connected the player to another computer in the house.
    DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
    -I installed the software.
    Note: The computer did NOT have a previous version of the software installed at all, ever.
    My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
    -Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

Maybe you are looking for