Creative ZEN Micro won update firmware

I have Creative ZEN Micro and i cant get it to update i do everything right but it doesnt have enought battery power. and i cant get it to charge. so wat do i do

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Similar Messages

Creative Zen Micro won't turn

Creative Zen Micro -
When I plug the usb into a computer, it has the charge icon in the top right corner of the screen. If I attemp to turn it on, while plugged in, the creative sceen come on, and then dissapears. When it is not plugged into the computer, I get no repsponse what so ever. I haven't attmpted to reset it. Any ideas? Thanks for your time.

Try starting the player into Recovery Mode, see if that works:
Ensure that the Zen Micro is turned off.
Remove the battery.
Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears. 
The following options will be displayed:
) Clean Up (Performs a disk scan on the players harddisk)
2) Format All (Formats the players harddisk - Note: all contents will be lost)
3) Reload OS (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Zen Micro) Caution: Do not select this option until a firmware update has been downloaded onto the PC
4) Reboot (Reboots the device).
If you can get into Recovery Mode, try the Clean Up first.
Cat

Creative Zen Micro PlaysForSure/MTP Firmware 2.00

When installing the new firmware update version 2.00.2 on my Zen Micro, the Zen Micro Explorer and the Creative MediaSource Applications do not recognize the device when it is plugged in. I installed the software Update Package (v.00.) for 'Zen Micro Players with PlaysForSure/MTP Firmware' and I am experiencing the same results. I had to revert the player back to PDE Firmware v.0.03.
Please update forum if experiencing the same thing or have suggestions.

MediaSource won't work with the new v2 firmware, you can only use WMP and the updated version of the Zen Micro Media Explorer. I believe it does say this in the readme associated with the new firmware.

Help! My creative zen micro won't turn on/charge/anythi

The last time I turned it on, it showed the CREATIVE logo and stayed like that until the battery died (It may have been around 2 hours or so...) but now it won't turn on, it won't show the blue lights when it's plugged in (and yes, it's plugged in properly) and I can't access it from my computer.
Please help!!

First thing to try is connecting to another PC. What's happened is the battery is flat, but I assume that it should recharge from flat even via USB.

BETA - Creative Zen Micro PlaysForSure with Windows Media Player 10 Update 2.10

I realise this has been talked about before, but...
I installed Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 a couple of times and I had trouble syncing tracks. Formatting and Cleaning Up didn't work, before you ask. So i downgraded to previous firmware. I was wondering whether any users who had this problem installed the Beta firmware and found it was OK, because I know I can't downgrade from a Beta release so I wanted to ask before I installed it.

I would imagine that there are people around who would answer YES, and some that would answer NO to your question.
But given what appears to be a large number of people who have troubles with that BETA firmware (esp when used with Napster to go), I would suggest you don't try that BETA firmware unless :
- you have a high stress level,
- you don't mind the risk of turning your Micro useless for a few weeks
- you feel a strong need to take whatever risk to solve whatever problems you have now.
-- just saying ;-)

Creative Zen Micro... What could it

Hello,
When I tried to update my creative zen micro to the firmware version 2.2, the program froze, and I was forced to close it while the screen was stuck at "Player rebooting... please wait...". Now, when I hook my player to my computer, my computer recognizes it as a portable device under Device Manager named "Creative Zen Micro" and it is recognized in My Computer. When I right click and hit properties on the icon in My Computer it says Firmware Version: 2.2. But when I double click it says it only has a 20 MB space when this player is 5 GB. When I turn my Zen Micro on, the player quickly flashes to "Firmware Problem" before proceeding to the Recovery Mode Screen. Now, each selection in the Recovery Mode works. But, where I'm stuck is when I go into the (latest) version of the Zen Micro explorer, it tells me to connect my device. Also, when I try to downgrade my firmware or run any Creative software that requires the device to be detected, it can't detect it. This is quite odd, considering windows detects it under Portable Devices just fine.
-I reinstalled all the original software, still no go
-I reinstalled the original software and upgraded to the latest manually, still no go
-I reinstalled all my USB port drivers, still no go
-I cleaned and formatted the player under Recovery Mode, still no go
All I need to do is downgrade my firmware to a non Plays-for-Sure (since it is the version of installation that failed). But, I just can't get the Creative programs to detect my player.
Any help would be GREATLY appreciated.
Thanks in advance,
Jason

Alas!
I got it to work!
Here's how I fixed it ( in case anyone else has this problem )
-I connected the player to another computer in the house.
DO NOT connect the player to a front of the case USB port because the computer had trouble using the player in that port, connect it DIRECTLY to the motherboard in the back of your computer.
-I installed the software.
Note: The computer did NOT have a previous version of the software installed at all, ever.
My laptop and desktop could not recognize my player properly, but they DID have the player installed previously on both of them. (But it also could be because they both have Creative Sound Card software installed, you never know)
-Zen explorer did NOT detect my player, so I ran the firmware update ( in my case downgrade to . ) installation and VOILAH! It detected my player fine and downgraded it successfully.

Creative Zen Micro Quest

I have a white 5 gig Zen Micro and i love it but...............can someone please tell me how you synch up with Microsoft Outlook.... so that i can use the calender, contacts, and to-do-list features...........also, i've tried going throught the zen micro media explorer but it always tells me the device is connected, although it is, why does this happen and does it have anything to do with me using the latest firmaware (Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 )...........help is appreciated.
Thank you.

big_d5,
If you had update the MTP firmware for the player, you will also need to update the Zen Micro Media Explorer to support the MTP version. Go to the driver page and look for this Zen Micro Media Explorer .00. for Creative Zen Micro (Software Update Package for Zen Micro Players with *PlaysForSure/MTP Firmware).
Jason

How to install Zen Micro 5GB with firmware 2.00

How? I went to my store, and they said I must use "Sync" in WMP 0... but how ?

I for one don't understand your question... You may want to rephrase and elaborate a bit.
Are you talking about something to install on your PC? It's true that you can use WMP (Windows Media Player) to load music to a Zen Micro with 2.00.2. You could also install the specific version of Zen Explorer (see the download section of Creative.com). You need to get the right version, because the version of Zen Explorer on the CD in the box, only works on .x firmware
> Zen Micro Media Explorer .00. for Creative Zen Micro (Software Update Package for Zen Micro Players with *PlaysForSure/MTP Firmware) (35.27 MB)

Creative zen micro please help me

ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
this is the 3rd time i posted bout this
NOW WHAT DO I DO? please please please help...
ps sorry for the bad grammer and spelling

I just received the same problem,how do I fix it's

Creative Zen micro: "Firmware Problem&qu

hey, i have a Creative zen micro (orange, 6gb but i think it doesent matters"), but when i turn it on, it says "Firmware problem".
and it goes to the menu (think is called Recovery menu) and it shows:
Creative Zen Micro V0.0.65
1.Clean Up
2.Format all
3.Reload frimware
4.Reboot
now creative tells me to download a new firmware.
i did.
then to "RELOAD FIRMWARE"
and click on the upgrade, but then it says that there is no player connected, and my compuer does recognize it.
is there any way to fix this or is my zen busted?

I had a simalar problem with my Zen xtra, if it failed durng a firmware update and its stuck in recue mode try this:
Remove all creative software and drivers from your P.C
remove windows media player and media player runtime ( from control panel/add/remove programs - if you have them listed there) you should see it go through a rollbackl procedure to an earlier version of wiondows media player.
Downlaod the latest firmware for your player
Re-boot/re start your P.C
Go to the creative support website, and download the plays for sure software suite
listed as:
. Creative MediaSource Plugin for PlaysForSure devices (version .00.8)3.98 MB 28 Apr 05 
install the software by clicking on it.
RE-boot your P.C, with your player conected via USB
once your P.C re-starts, go to the location where the firmware was downloaded to and get ready to start the upgrade
Copnnect your player to its charger ( unless it charges via USB)
On your player slect the reload OS option in the rescue menu
When prompted by your player start the firmware update on your PC.
with the Zen xtra firmware you had/need to select the language option in the update on the P.C when the p[layer displays the 'update over USB' message.

Creative Zen Micro - All time Recovery Mode( Firmware probl

Good. Staff, my Creative Zen Micro does not give to come back toward the normal version Firmware, appears recoverymode and he never leaves you give, says that he has a problem in the Firmware. They help me

My version is : 2.2.02_0.00.65 , and i not can feedback the firmware......says on the turn off, Firmware Problem, and he goes to Recovery Mode... Please help me

Won't reformatting the Creative Zen Micro constantly kill it? Especially with the beta firmwa

I have just been the victim of "sudden audio player death syndrome" my iri'ver h0 bit the dust two weeks after I bought it... I have the same fears about my creative zen micro, as I fear that these micro dri'ves are less durable than full size hard disks and more succeptible to failure. I really was scared to format it once. And I asked the question earlier... but I would like some more replies, do you have to reformat the dri've every month to renew subscription tracks on napster to go... does anybody have experience with the service and the player, maybe for a couple of months that could tell me?

I have the Micro as well as the Seagate Pocket Dri've, a standalone version of the S dri've that's in the Micro. I've owned the latter for about fi've months now. Both of them take a fair share of abuse: the Seagate dri've travels in my backpack or pocket every day to and from work. The Micro is strapped on my arm fi've times a week as I do my daily jog. Both have yet to show any signs of damage. I also reformatted my Micro dri've about 0-2 times when I first got it (I had problems that I thought were caused by the firmware but, as it turns out, were caused by my USB card).

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Major audio problems with Creative Zen Micro 6Gb... need h

I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
-Bash

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Help with my Bran-New Creative Zen Micro Photo. [Questi

If you don't want to see the backing of my whole story skip to the bold print at the bottom!I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative ZEN Micro won update firmware

Similar Messages

Maybe you are looking for