Creative zen mozaic 4GB, problems with albums

I have just bought my mozaic, the problem is I put my music in albums, but they are not visible, I can listen to them only as separate songs which is not comfortable as it is more than 700 songs. How to make the albums visible? I would be grateful for any advice. I tried to put them via the programme included and drag and drop but it doesn't work

My English is not good, but I?ll try to explain the solution of the problem how to connect zen?After 2 hours of torment using 6 computers, my zen mozaic was finally connected!So, the first option:Actually it is idiocy, but the 3 computers were connected to zen after the installation of .. nokia pc suite, but after having installed the program, the player was not found.You need to connect any Nokia phone, and only then, zen will be connected!?This method works, it is checked.As I understood the nokia pc suite adds drivers for the MTP protocol when you install the phone.You can try to update your Windows media player, but I did not try it.
Method Two, without the need to install nokia pc suiteInstall Creative Centrale.2)Download and install the Media Transfer Protocol Porting Kit http://www.microsoft.com/downloads/d...c0cafe798955If Windows XP does not pass the authenticity then download from here:http: / / rapidshare.com/files/20233...tppk2.exe.html. This method worked out on 6 computers. After such "dances with tambourine" Creativedisappointed me Enjoy!?

Similar Messages

Creative Zen Mozaic: Conenctivity problems

Good day, I'm using both Vista Home Premium and XP (with SP 3 and WMP installed). While My Zen Mozaic (8gb) works fine on Vista, it can't be connected to XP. The player itself is recognized in Device manager though it is listed under Other Devices. Windows can't find any drivers for it (I've tried reinstalling device, no use). Any help is highly appreciated.
Thanks,
Vytautas

My English is not good, but I?ll try to explain the solution of the problem how to connect zen?After 2 hours of torment using 6 computers, my zen mozaic was finally connected!So, the first option:Actually it is idiocy, but the 3 computers were connected to zen after the installation of .. nokia pc suite, but after having installed the program, the player was not found.You need to connect any Nokia phone, and only then, zen will be connected!?This method works, it is checked.As I understood the nokia pc suite adds drivers for the MTP protocol when you install the phone.You can try to update your Windows media player, but I did not try it.
Method Two, without the need to install nokia pc suiteInstall Creative Centrale.2)Download and install the Media Transfer Protocol Porting Kit http://www.microsoft.com/downloads/d...c0cafe798955If Windows XP does not pass the authenticity then download from here:http: / / rapidshare.com/files/20233...tppk2.exe.html. This method worked out on 6 computers. After such "dances with tambourine" Creativedisappointed me Enjoy!?

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Zen Vision: M problem with Album Cov

I've read a lot of intructions on these boards about dragging the album cover into the generic icon (after I select "View" and "Albums" in the Media Explorer. Thing is, when I try to drag a picture nothing happens. Next thing I try is to manually copy and paste the album cover into the same generic grey icon and it says that it won't allow it to be viewed in my device and asks me if I just want to drop it in the folder (which does no good). Anyone else solve this problem in the past? Do I have to use a certain type of image file type? I'm using jpgs.
Please help me.
?Also, I am using Windows Vista 32-bit Premium Home Edition. Thanks in advance. I really want my album covers to work, it will be so cool.

I found the easiest way is to do it in Creative Media Source 5, highlight all the tracks in the album you want to apply art to, right click, go to "edit properties", click on the last entry on the bottom, "change album art" and assign the JPG of your choice, then update tags and the album art will show on your player, it has worked 00% for me so far.

Creative Zen 32GB - connection problem with 2nd PC

Can anyone help?
Have had my ZEN for 2 years now & (touch wood) it's still going well.
I want to be able to upload music from my laptop when I'm away so I installed the software & registered it without any problem. However my laptop can't detect the device.
My ZEN has just connected quite happily with my main PC so it can't be the devce. Is there a restriction against using the same device on two different computers? If not why can't my laptop detect the device?
O/S Windows XP SP3 on both computers.
Thanks

Many thanks for your response.
I have tried connecting using another USB without any success.
I think my lap top should be powerful enough - it has a 5 inch screen and I can connect my Philips 32GB GoGear without any problem.
(My Philips is my back-up in case anything goes wrong with my ZEN but I don't like it as much )

Creative Zen loading music problem

"Creative Zen loading music problem?I just started using a creative zen (DVP-FL000, 6Gb) player and i'm having?a few issues copying music onto it.
I have loaded the latest firmware (.2.03e) onto it and formatted it so was clean when i started loading my music on.
I'm using winamp on winxp to copy my music to the player, but occasionally i get tracks that wont copy to the player. Winamp just shows 'unspecified error'. If a file fails to copy it will never copy, no matter how many times i try. Somtimes its a random track, sometimes an entire album.
So i also tried copying the tracks that wont copy using windows explorer, it appears to copy but the file never appears on the device. The same is also true when i try it on my Windows7 laptop with explorer, it will appear to be copying but then part way through it will report that the device has stopped responding.
It only seems to happen with windows media files, all my mp3s copy fine. The files that dont copy probably represent about 0% of my music but play fine on all my other players.
sorry for the long post, just really scratching my head with this one!
anyone have any ideas?

solved
did a 'clean up' in the recovery menu, no problems transferring tracks since

Creative Zen Micro 4GB isn't recognized on my PC

Hello,
I bought a Creative Zen Micro 4GB?couple of years ago (3-4 years ago) and lost it year ago. I found it now and wanted to start using it but I have a problem. I bought a new laptop which is Vista and my pc doesn't recognize the player when I plug it in. It recognizes it and the bubble comes up at the tray, but it doesnt recognize it and says it can't find the driver and that I need to install the driver. However, since my pc can't recognize it, I can't install a driver or do anything with it since it isn't recognized by my pc. I read lots of posts and solutions to them, but none of them help my problem. In the device manager, it is apperead with a yellow explanation mark but I can't reinstall the driver. I also tried the cleanup and reboot but that also didn't work. Can anyone help me? (I also tried this on my old pc which has XP but it had the same problem.) My Pc is Windows Vist 32-Bit Operating System and Service Pack . By the way, when i plug in my zen micro, the window comes saying 'found new hardware' and I am suposed to locate a place for the dri've and it says i should insert the disc that came with it. However, when i insert it nothing happens and in the end it says it failed. I really need urgent help. Thank you in advance already.

Re: Creative Zen Micro 4GB isn't recognized on my PC7Hello Efe,
Welcome to Creative forums!
You may want to check out this threads for resolution on your issue:
CREATIVE ZEN MICRO and WINDOWS VISTA
Zen Micro and Windows Vista
Windows Vista / Zen Micro

Creative ZEN V Plus HELP with light

My Creative ZEN is working, but i have no light on the screen, i turned the light off in the settings, and now i cant see anything, haha!
How can i fix this? :S

I have the same problem and have returned my player?I think Creative are having some problems with this product as they are saying it will take 2 months to replace player in Australia!

***HELP*** Creative ZEN 8GB Vista Problems. NO SOLUTION FOUND

I have searched the web and the forums. I cannot find a solution anywhere.
My Creative Zen 8GB will not connect in vista. Ive upgraded the firmware to .3.0 and it still will not detect. Ive downloaded the newest Creative Media Browser and it still will not detect.
I searched the creative knowledge database and came across the "regedit USB allow permission tweak". regedit will not allow me to change the usb settings even though i have administrator rights.
i've searched the forum and came across about 0 threads regarding this issue and not one of them had a response from a Creative Administrator/Moderator.
has anybody at all gotten creative zen 8GB to work with vista? If i cannot get this to work, I am going to return this POS.
Can anybody help?

yes i tried the CD that came with it. but it still does not work.
i have upgraded the firmware on an XP desktop and installed the newest creative media browser on my vista notebook and still my Creative ZEN will not detect on my Vista notebook.
I called technical support and the only solution they gave me was to "update my MTP driver in device manager" but when i do that, vista tells me that "windows has determined that the most appropriate driver is already installed"
i know SOMEBODY out there has had to have come across this problem and solved it somehow.
com'on guys....help me out here

Creative ZEN Mozaic Starter Pack 1.04.05 releas

Hi everyone,
The ZEN Mozaic Starter Pack is now available for download in the Support section.
Creative ZEN Mozaic Starter Pack .04.05
Filesize : 5.75 MB
Release date : 2 Nov 08
File Name : ZENMozaic_PCApp_L4__04_05.exe
This starter pack contains the software and User's Guide for your Creative ZEN® Mozaic player. It enhances the software update functionality of Creative Centrale. For more details, read the rest of this Web release note.
The starter pack includes the following:
•Creative Centrale (.04.05)
Rips audio CDs and VCDs/DVDs, transfers and manages your music, photos, and videos.
•Creative Removable Disk Manager
Resizes your player's removable disk capacity, formats or deletes the removable disk partition.
•User's Guide
Provides information on using your player.
Enhancements:
•Enhances the software update functionality of Creative Centrale.
•Reduces the sizes of video files converted using Creative Centrale.
Requirements:
•Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2
•USB port
•Creative ZEN Mozaic player
Note:
•To install this starter pack
.Download the ZENMozaic_PCApp_L4__04_05.exe file to your local hard disk.
2.Close all application windows that are currently running.
3.Double-click the downloaded file and follow the instructions on the screen.
Message Edited by KokChoy-CL on <span class='local-date'> -2-2008<span class='local-time'> 0:36 PM

They fixed a bug that could have prevented the proper playback with some files. No more video types are supported by this firmware.
This firmware also once again enhanced the X-Fi Crystalizer feature (although it is not stated in the official description by Creative). It unfolds its full potential now IMO. The Creative Zen X-Fi has perfect sound quality.
@ Creative staff: Why is there no possibility to move a single track up/down in my playback list?
Even the old "Jukebox Zen Xtra" had this important feature.
Also why is the Zen X-Fi missing the ability to record from radio? The predecessor - the Zen - can do it (and the devices have many technical specifactions in common).
Also, I hope we'll get a T9 support for the nine buttons in the near future because the input method Creative technicians suggested is very uncomfortable.

Creative ZEN Mozaic EZ Series Firmware 1.03.05 released

Hello everyone,
There is a new firmware available for download.
Creative ZEN Mozaic EZ Series Firmware .03.05
Filesize : 7.7 MB Release date : 2 Jul 09 File Name : ZENMozaicEZ_PCFW_L22__03_05.exe This download contains an improved version of the firmware found on your Creative ZEN® Mozaic EZ player. It ensures smooth music playback when your player is locked. For more details, read the rest of this Web release note.
Fixes:[*]Ensures smooth music playback when your player is locked.[*]Improves the language support for certain non-English characters.Requirements:[*]Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2 or later[*]USB port[*]Creative ZEN Mozaic EZ playerNote:[*]Before you upgrade the firmware, back up your player's contents.[*]To install this firmware, do the following:[*]Download the ZENMozaicEZ_PCFW_L22__03_05.exe file to your local hard disk.[*]Close all application windows that are currently running on your computer.[*]Connect your player to your computer.[*]Double-click the downloaded file and follow the instructions on the screen.
Message Edited by Loi-CL on 07-04-2009 03:49 AM

Hi Rich_T,
You might have misread it but the link that you're looking is actually for the Zen Stone Plus w/ Built-In speaker while the new firmware is for Zen Stone (only) w/ Built-In speaker.
Here's the link to that new firmware.

Creative zen mozaic + standard speakers?

hello, this is a simple question from a noob:
is it possible to plugin standard speakers from my laptop into a creative zen mozaic and then listen to it that way?

Hi Xenantaya,
The ZEN Mozaic uses a 3.5mm mini jack connector for audio output. That's where you connect your headphones to the player. You can connect your speakers to the player if it uses the same connector.

Creative Zen Mozaic EZ100 stuck on 'rebuilding' screen

Hi,
I bought my Creative Zen Mozaic EZ00 in February and yesterday, after adding files to it and disconnecting the usb, it went onto the 'rebuilding' screen and became stuck there. I reset it and when I turned it back on, it stuck on the same screen once again. I have tried accessing the recovery menu, but it won't appear.
Any help would be greatly appreciated!
LK

:Mine does this sometimes. i tried to recovery mode-nothing worked. tried firmware-nothing. so i deleted everything on my ZEN Mozaic and unplugged and waited for it to load up and then i plugged it on the USB and aded my music and took it off and it worked. but i hate to do this everytime.

Problems with Album Shuffle

Hi all.
I have a problem with Album Shuffle mode. Basically, I am trying to listen to my albums, but it will start treating songs from the same album as being from different albums. I have tried editing the info of the tracks to be identical in every way, I have even used the multiple editing feature, and they are in the same folder in my iTunes Music library. I am stuck with what to do, as I really like the album shuffle feature and don't want to have to manually choose the next album and such. Can you guys help at all? Would be very grateful for any advice

I tinkered with it a little more, and no idea HOW I fixed it, but it's working now. Maybe had something to do with genres.

Creative ZEN Mozaic EZ Series Firmware 1.02.03 released!

8Creative ZEN Mozaic EZ Series Firmware .02.03 released!Hi everyone,
There is a new firmware for the Creative ZEN Mozaic EZ Series.
Creative ZEN Mozaic EZ Series Firmware .02.03
Filesize : 7.77 MB
Release date : 23 Mar 09
File Name : ZENMozaicEZ_PCFW_L22__02_03.exe
This download contains an improved version of the firmware found on your Creative ZEN® Mozaic EZ player. It stabilizes your player's volume settings and improves the overall stability. For more details, read the rest of this Web release note.
Fixes:
* Stabilizes the player's volume settings.
* Improves the display for certain messages.
* Improves the display for Thai text.
* Enhances the player's overall stability.
Requirements:
* Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2 or later
* USB port
* Creative ZEN Mozaic EZ player
Note:
* To install this firmware, do the following:
. Download the ZENMozaicEZ_PCFW_L22__02_03.exe file to your local hard disk.
2. Close all application windows that are currently running on your computer.
3. Connect your player to your computer.
4. Double-click the downloaded file and follow the instructions on the screen.

Hi Rich_T,
You might have misread it but the link that you're looking is actually for the Zen Stone Plus w/ Built-In speaker while the new firmware is for Zen Stone (only) w/ Built-In speaker.
Here's the link to that new firmware.

Creative zen mozaic 4GB, problems with albums

Similar Messages

Maybe you are looking for