Creative zen mozaic + standard speakers?

hello, this is a simple question from a noob:
is it possible to plugin standard speakers from my laptop into a creative zen mozaic and then listen to it that way?

Hi Xenantaya,
The ZEN Mozaic uses a 3.5mm mini jack connector for audio output. That's where you connect your headphones to the player. You can connect your speakers to the player if it uses the same connector.

Similar Messages

  • Creative ZEN Mozaic EZ Series Firmware 1.03.05 released

    Hello everyone,
    There is a new firmware available for download.
    Creative ZEN Mozaic EZ Series Firmware .03.05
    Filesize : 7.7 MB Release date : 2 Jul 09 File Name : ZENMozaicEZ_PCFW_L22__03_05.exe This download contains an improved version of the firmware found on your Creative ZEN® Mozaic EZ player. It ensures smooth music playback when your player is locked. For more details, read the rest of this Web release note.
    Fixes:[*]Ensures smooth music playback when your player is locked.[*]Improves the language support for certain non-English characters.Requirements:[*]Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2 or later[*]USB port[*]Creative ZEN Mozaic EZ playerNote:[*]Before you upgrade the firmware, back up your player's contents.[*]To install this firmware, do the following:[*]Download the ZENMozaicEZ_PCFW_L22__03_05.exe file to your local hard disk.[*]Close all application windows that are currently running on your computer.[*]Connect your player to your computer.[*]Double-click the downloaded file and follow the instructions on the screen.
    Message Edited by Loi-CL on 07-04-2009 03:49 AM

    Hi Rich_T,
    You might have misread it but the link that you're looking is actually for the Zen Stone Plus w/ Built-In speaker while the new firmware is for Zen Stone (only) w/ Built-In speaker.
    Here's the link to that new firmware.

  • Creative Zen Mozaic EZ100 stuck on 'rebuilding' screen

    Hi,
    I bought my Creative Zen Mozaic EZ00 in February and yesterday, after adding files to it and disconnecting the usb, it went onto the 'rebuilding' screen and became stuck there. I reset it and when I turned it back on, it stuck on the same screen once again. I have tried accessing the recovery menu, but it won't appear.
    Any help would be greatly appreciated!
    LK

    :Mine does this sometimes. i tried to recovery mode-nothing worked. tried firmware-nothing. so i deleted everything on my ZEN Mozaic and unplugged and waited for it to load up and then i plugged it on the USB and aded my music and took it off and it worked. but i hate to do this everytime.

  • Creative ZEN Mozaic Starter Pack 1.04.05 releas

    Hi everyone,
    The ZEN Mozaic Starter Pack is now available for download in the Support section.
    Creative ZEN Mozaic Starter Pack .04.05
    Filesize : 5.75 MB
    Release date : 2 Nov 08
    File Name : ZENMozaic_PCApp_L4__04_05.exe
    This starter pack contains the software and User's Guide for your Creative ZEN® Mozaic player. It enhances the software update functionality of Creative Centrale. For more details, read the rest of this Web release note.
    The starter pack includes the following:
    •Creative Centrale (.04.05)
    Rips audio CDs and VCDs/DVDs, transfers and manages your music, photos, and videos.
    •Creative Removable Disk Manager
    Resizes your player's removable disk capacity, formats or deletes the removable disk partition.
    •User's Guide
    Provides information on using your player.
    Enhancements:
    •Enhances the software update functionality of Creative Centrale.
    •Reduces the sizes of video files converted using Creative Centrale.
    Requirements:
    •Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2
    •USB port
    •Creative ZEN Mozaic player
    Note:
    •To install this starter pack
    .Download the ZENMozaic_PCApp_L4__04_05.exe file to your local hard disk.
    2.Close all application windows that are currently running.
    3.Double-click the downloaded file and follow the instructions on the screen.
    Message Edited by KokChoy-CL on <span class='local-date'> -2-2008<span class='local-time'> 0:36 PM

    They fixed a bug that could have prevented the proper playback with some files. No more video types are supported by this firmware.
    This firmware also once again enhanced the X-Fi Crystalizer feature (although it is not stated in the official description by Creative). It unfolds its full potential now IMO. The Creative Zen X-Fi has perfect sound quality.
    @ Creative staff: Why is there no possibility to move a single track up/down in my playback list?
    Even the old "Jukebox Zen Xtra" had this important feature.
    Also why is the Zen X-Fi missing the ability to record from radio? The predecessor - the Zen - can do it (and the devices have many technical specifactions in common).
    Also, I hope we'll get a T9 support for the nine buttons in the near future because the input method Creative technicians suggested is very uncomfortable.

  • Creative ZEN Mozaic EZ Series Firmware 1.02.03 released!

    8Creative ZEN Mozaic EZ Series Firmware .02.03 released!Hi everyone,
    There is a new firmware for the Creative ZEN Mozaic EZ Series.
    Creative ZEN Mozaic EZ Series Firmware .02.03
    Filesize : 7.77 MB
    Release date : 23 Mar 09
    File Name : ZENMozaicEZ_PCFW_L22__02_03.exe
    This download contains an improved version of the firmware found on your Creative ZEN&reg; Mozaic EZ player. It stabilizes your player's volume settings and improves the overall stability. For more details, read the rest of this Web release note.
    Fixes:
    * Stabilizes the player's volume settings.
    * Improves the display for certain messages.
    * Improves the display for Thai text.
    * Enhances the player's overall stability.
    Requirements:
    * Microsoft&reg; Windows Vista&reg;, Windows&reg; XP Professional x64 Edition, Windows XP Service Pack 2 or later
    * USB port
    * Creative ZEN Mozaic EZ player
    Note:
    * To install this firmware, do the following:
    . Download the ZENMozaicEZ_PCFW_L22__02_03.exe file to your local hard disk.
    2. Close all application windows that are currently running on your computer.
    3. Connect your player to your computer.
    4. Double-click the downloaded file and follow the instructions on the screen.

    Hi Rich_T,
    You might have misread it but the link that you're looking is actually for the Zen Stone Plus w/ Built-In speaker while the new firmware is for Zen Stone (only) w/ Built-In speaker.
    Here's the link to that new firmware.

  • Creative ZEN Mozaic Firmware 1.06.01 releas

    Hi everyone,
    There is a new firmware update for the ZEN Mozaic available in the download section.
    Creative ZEN Mozaic Firmware .06.0
    Filesize : 5.57 MB
    Release date : 5 Dec 08
    File Name : ZENMozaic_PCFW_L22__06_0.exe file to your local hard disk.
    2. Close all application windows that are currently running on your computer.
    3. Connect your player to your computer.
    4. Double-click the downloaded file and follow the instructions on the screen.

    Hello Hermifrm,
    Please check the requirements for the firmware above. It only works on the following OS: Microsoft Windows Vista, Windows XP Professional x64 Edition, Windows XP Service Pack 2 or later. Try updating your MX on an XP or Vista machine. Welcome to Creative forums!

  • Creative ZEN Mozaic Firmware 1.06.01 relea

    Hello Everyone,
    There is a new firmware for ZEN Mozaic available for download in the support section.
    Creative ZEN Mozaic Firmware .06.0
    File Name : ZENMozaic_PCFW_L22__06_0.exe
    <span class="DownloadSizeBox">Filesize : <span class="DownloadSizeText">5.57 MB
    <span class="DownloadSizeBox">Release date : 5 Dec 08
    <span class="DownloadSizeBox"><div class="DownloadText"><div id="ShortDesc">This download contains an improved version of the firmware found on your ZEN&reg; Mozaic player. It improves the battery charging process. For more details, read the rest of this Web release note.
    <div id="DetailedDesc">Fixes:
    Improves the battery charging process. <
    Enhances the playback pattern for the shuffle playmode.<
    Requirements:
    Microsoft&reg; Windows Vista&reg;, Windows&reg; XP Professional x64 Edition, Windows XP Service Pack 2 or later <
    USB port <
    Creative ZEN Mozaic player<
    Note:
    To install this firmware, do the following:
    Download the ZENMozaic_PCFW_L22__06_0.exe file to your local hard disk. <
    Close all application windows that are currently running on your computer. <
    Connect your player to your computer. <
    Double-click the downloaded file and follow the instructions on the screen. <
    <

    Hello Hermifrm,
    Please check the requirements for the firmware above. It only works on the following OS: Microsoft Windows Vista, Windows XP Professional x64 Edition, Windows XP Service Pack 2 or later. Try updating your MX on an XP or Vista machine. Welcome to Creative forums!

  • Creative zen mozaic 4GB, problems with albums

    I have just bought my mozaic, the problem is I put my music in albums, but they are not visible, I can listen to them only as separate songs which is not comfortable as it is more than 700 songs. How to make the albums visible? I would be grateful for any advice. I tried to put them via the programme included and drag and drop but it doesn't work

    My English is not good, but I?ll try to explain the solution of the problem how to connect zen?After 2 hours of torment using 6 computers, my zen mozaic was finally connected!So, the first option:Actually it is idiocy, but the 3 computers were connected to zen after the installation of .. nokia pc suite, but after having installed the program, the player was not found.You need to connect any Nokia phone, and only then, zen will be connected!?This method works, it is checked.As I understood the nokia pc suite adds drivers for the MTP protocol when you install the phone.You can try to update your Windows media player, but I did not try it.
    Method Two, without the need to install nokia pc suiteInstall Creative Centrale.2)Download and install the Media Transfer Protocol Porting Kit http://www.microsoft.com/downloads/d...c0cafe798955If Windows XP does not pass the authenticity then download from here:http: / / rapidshare.com/files/20233...tppk2.exe.html. This method worked out on 6 computers. After such "dances with tambourine" Creativedisappointed me Enjoy!?

  • Creative Zen Mozaic: Conenctivity problems

    Good day, I'm using both Vista Home Premium and XP (with SP 3 and WMP installed). While My Zen Mozaic (8gb) works fine on Vista, it can't be connected to XP. The player itself is recognized in Device manager though it is listed under Other Devices. Windows can't find any drivers for it (I've tried reinstalling device, no use). Any help is highly appreciated.
    Thanks,
    Vytautas

    My English is not good, but I?ll try to explain the solution of the problem how to connect zen?After 2 hours of torment using 6 computers, my zen mozaic was finally connected!So, the first option:Actually it is idiocy, but the 3 computers were connected to zen after the installation of .. nokia pc suite, but after having installed the program, the player was not found.You need to connect any Nokia phone, and only then, zen will be connected!?This method works, it is checked.As I understood the nokia pc suite adds drivers for the MTP protocol when you install the phone.You can try to update your Windows media player, but I did not try it.
    Method Two, without the need to install nokia pc suiteInstall Creative Centrale.2)Download and install the Media Transfer Protocol Porting Kit http://www.microsoft.com/downloads/d...c0cafe798955If Windows XP does not pass the authenticity then download from here:http: / / rapidshare.com/files/20233...tppk2.exe.html. This method worked out on 6 computers. After such "dances with tambourine" Creativedisappointed me Enjoy!?

  • Creative ZEN Mozaic EZ 300

    Chow many letters can be on a line in a music? like its this song.........
    Killa C - 6 Ways From Sunday [ft. Tech N9ne, Haystak, Spice-, Bizarre, Skatterman] but when its on my Creative it looks like this 6 Ways From Sunday [ft. Tech N9ne, Haystak, Spice-, Bizarre, S
    can it go longer or just to the S

    (i dont think it was from my music. i came home from a friends house charged it on my wall charger, took a little nap woke up unpluged it and it would play a song for about 5s then shut-off. and now when i turn it on it does Creative - ZEN and after that it will turn dark blue and i have to reset it again. I think i want to stop using Creative Labs, cause this is my 4th ZEN and i have3 with errors and they wont do the upgrade.

  • Creative ZEN Mozaic EZ 300 wont play

    It was working 2 on sunday morning then i went home and charged it for a while then used it on monday morning and worked fine then after awhile it would only play about 5s of a song and shut off. and when i reset it it does Creative - then ZEN and it wont go past the ZEN part on the screen. tried to hold back button but nothing. and when i plug it in the computer it will work but only for a while.
    how can i fix this?

    (i dont think it was from my music. i came home from a friends house charged it on my wall charger, took a little nap woke up unpluged it and it would play a song for about 5s then shut-off. and now when i turn it on it does Creative - ZEN and after that it will turn dark blue and i have to reset it again. I think i want to stop using Creative Labs, cause this is my 4th ZEN and i have3 with errors and they wont do the upgrade.

  • Creative ZEN Mozaic case

    Hello,
    My ZEN Mozaic front&rear cases were broken by an impact. Where can I buy a new original cases? I don't found it anywhere.
    Thank you!

    Papalapa,
    I'm afraid you can't find a case replacement for your Mozaic. There is no casing available for sale for this model. You might want to contact customer support and see what are your options.

  • My creative zen stone (with speakers) is being very strange! Please he

    Hi!
    I got a pink creative stone with speakers (and no screen) about a month ago.
    This morning I tried to turn it on, and the green light came on, but there was no sound. When I plugged it into my computer, it wasn't recognised, and it didn't come up on my computer, therefore, I can't use the recovery tool
    . No amount of pushing at the on and play button, or resetting it with a paperclip works.
    I'd really, really like some help!!! Thankyou very much!!!!
    Katherine

    here's my suggestion, if you have not formatted your player before, format it using fat32. What happens is, it immediately plays the songs 3 to four seconds after you press the play button long enough.
    with the default settings of zen stone, the player starts playing songs after ten or so seconds that might be the reason you had time to fiddle with the toggles before the songs play when in fact it takes that long because it wasn't formatted to fat32.

  • Creative Zen Mozaic 8GB Froze!

    I own a Mozaic 8GB and have since June. It's never given me any problems until today. I listened to it earlier in the day and turned it off. When I turned the player back on and listened to a song, the song played fine, but there was a sort of staticky sound at the end that I'd never heard before. After that, I went to the albums menu and selected an album. I tried to play the album, but the player has since froze on the track listing for that album.
    Nothing will work. If I press any of the keys, the screen lights up, so it recognizes that I've pushed the keys, but nothing moves on the screen. If I plug it into my computer, the computer registers that it's there, but it doesn't show up on the Centrale software, nor does the device say "docked."
    I can't locate a reset button anywhere on the player and I have no idea what's wrong with it. Can anyone help?

    good thing you found it. i was about to say the same thing
    http://storeyourpicture.com/images/s...lectronics.jpg

  • Creative Zen Mozaic will not turn on

    I have had my Mozaic for just two days.
    It has been charged up and running fine.
    I shut it down and hour ago then went to turn it on and it won't come up.
    I do notice the green light is lit near the on/off/lock switch.
    But there is nothing on the screen.
    Also, plugging it in to the pc does nothing.
    Time to ship it back?

    (You are welcome.
    This is extracted from the user manual, hope it helps you understand your player better.
    "Your player may occasionally operate at less than optimal performance for a number of reasons, for example, if the music library is rebuilt frequently when no changes have been made to it.
    Selecting Clean Up in your player's Recovery Mode menu cleans, rebuilds and reorganizes your player's memory and restores it to optimal efficiency."

Maybe you are looking for

  • Soundtrack ideas for a manufacturing video?

    Hey all. I'm editing a video for a firm that manufacture machined metal parts. It's getting late and i'm 'stuck' - anyone got any great soundtrack ideas? The complete process is about 2 mins 45 secs. thanks in advance Mike

  • External Monitor Flashing to Black

    PowerBook G4 15" 1.67 GHz with 2 GB DDR2 SDRAM running OS X10.4.11. I'm attaching a Samsung SyncMaster 205BW using DVI cable that came with monitor. My Mac is recognizing this as a SyncMaster and I am using the display settings it defaulted to. I am

  • Mpeg-4 wont play in latest itunes

    I converted some dvd files to mpeg-4, and it plays in windows media player, nero, my IPOD, etc, but NOT in Itunes/Quicktime (they both use the same player). In those two, audio comes out, but no video, just a black screen (I tried some trouble shooti

  • Recommended third party library instruments?

    New Apple user here - last used Logic 8 years ago, and while getting to grips with it again, stumbled into the Library instruments. Was just looking to hook up my old Korg, but now blown away by the Library instruments in Logic - no need for a new Ko

  • Sparc Storage not visible

    Hi, I bought an E4000 and Storage array 100. But the system doesn't recognise the array. When I try to install Solaris 10, it says no storage devices found. I tried probe-fcal-all but it didn't give any output and didn't work. The LCD on array shows