Creative zen touch 40 gb stuck in recovery mode! H

Stuck in recovery mode due to firmware problem. When i plug unit in via usb my pc recognizes it ok but when I try to download firmware says device not recognized! Im using xp. help.

. Creative's 24 hour benchmark is based on playing 28 kbit/s MP3 tracks which are 4 minutes in length, and not touching any controls on the player. The higher the bit-rate of the track, the less the battery will last. The more you do with the player e.g. using the back light, the less the battery will last. Conversely if you use lower bit-rate tracks it will last even longer.
2. The Zen Touch has an internal battery like the iPod. Creative's battery replacement is rumoured to cost around $00 as well, or you can buy one and do-it-yourself. Chances are the battery will last 3 years, and I can't imagine many people keeping the player this long anyway.
3. I doubt anyone could hear any difference. A lot of people tout Creative as having superior sound quality, and how they can "hear the difference between the iPod", and the Signal to Noise ratio seems to be higher than the iPod (although I believe Apple don't publish theirs) but at these levels of SnR you won't be able to hear a difference.
4. The only thing to worry about is having good clean tag data on the files, but it's the same for the iPod. Both players build their Music Library from the tag data.
I would say it's really a case between not going for the obvious choice, getting longer battery life, and a cheaper player, or going for the iPod which does have more features.

Similar Messages

Creative Zen Vision 30Gb Stuck in Recovery Mode, Freezes when trying to deal with Firmware

My Zen Vision is stuck in Recovery Mode. The PC recognizes it but it comes up as 50mb Storage Media. When you touch Reload Firmware or Format All, it freezes and you have to pull the battery out to shut it off. I don't know what to do. Charges fine, never said anything about HARDWARE issues, just can't get it to not freeze when trying to load firmware back onto it.

I did the same thing, my unit was working perfectly.
I just read that these players have a laptop 2.5 hard dri've installed in the unit. If this is true, the next chance I get, I will take my unit apart (40 gig nomad zen xtra) and see if I can reinstall the firmware directly. It's probably what they do at the repair sho
ps.
Check it out, It may be worth a try!!!

Zen Touch 40 Stuck in Recovery Mode During Firmware Upd

I never had any problems whatsoever with this player until I decided to update the firmware. Now it is stuck in recovery mode. I have tried all of the steps listed on the support pages and nothing works. I have tried it on 2 difference computers and the player is not recognized. Of course it is out of warranty and Creative wants to charge just about the equivalent of a brand new player to repair. Does anyone have a solution for this?

I did the same thing, my unit was working perfectly.
I just read that these players have a laptop 2.5 hard dri've installed in the unit. If this is true, the next chance I get, I will take my unit apart (40 gig nomad zen xtra) and see if I can reinstall the firmware directly. It's probably what they do at the repair sho
ps.
Check it out, It may be worth a try!!!

ZEN TOUCH 20GB - Stuck in Recovery Mode, during Firmware upgrade. HEL

Ooooh dear.
Me and my Zen Touch are completely stuck. Decided to upgrade the Zen's Software and Firmware and am now in deep trouble. Here are the steps I took.
First I sensibly backed up the 2000 songs on the player to my computer. Then I updated the MediaSource software and restarted the computer. Then I decided to go for the big change and downloaded the new PlayForSure firmware installation and that's where the problem starts - It never completed the installation, which I had to manually stop. I knew as part of puting this new Firmware onto the player, the Zen would be wiped clean, which it has. However, I now cannot get it out of recovery mode and it will not respond to attempts to download the new (or any) Firmware onto it.
What I now get is:
-Plug the Zen in, the computer recognises that there is plug and play equipment attached and makes the appropriate noise.
-The Zen will switch itself on as a response (or I can do it manually), with a normal-looking startup. It then briefly flashes a screen saying "Firmware Problem" before going into recovery mode.
-If I choose Clean Up, it takes a few seconds to clean the now empty disk, and returns to the recovery menu
-If I choose Format All, pretty much the same as Clean Up
-If I choose Reload Firmware, it warns me that the firmware will be erased. And asks if it should reload it via USB. You say 'yes' and it briefly flashes up "Start firmware update now" before returning to the recovery mode menu.
And finally, if I select Reboot, that's exactly what it does; the computer recognises that it's turned off, makes the noise, and recognises when it's turned on again.
Trying to download the Firmware from the computer, however, has turned into a nightmare. I've tried downloading the PlayForSure firmware and old Firmware from the files on my computer (running XP, by the way). And I've also tried prompting the Zen starting up the Media Source software, BUT they all claim that the player is NOT connected! Even though it is! The Zen switches on and Windows makes a sound every time I connect or disconnect it!
So what to do? I'm stuck in this vicious circle and no matter what random tricks I try, I can't get out. The player needs Firmware, but the software on the computer claims the player's not connected.
The player is now more than a year old, so I can't return it, and Creative's less-than-generous telephone support is not an option, so I'm left to any imaginati've and kind-hearted subscribers to this list to offer suggestions.
HELP!
Mark in the UK

My son?s Zen simply turned on one morning and refused to do anything except enter recovery mode, giving a firmware problem error and Creative Zen v0.0.58After an hours research I solved the problemI hope this helps someone out, but remember anything you do is your responsibility not mine, continue at your own judgment
Creative site SingaporeDownload driver and firmwarehttp://sg.creative.com/support/downl...ype=0&x=30&y=6
download driverCreative Zen and Jukebox Driver Upgrade version .30.03
firmwareCreative Zen Firmware .00.02
Install driver, connect Zen, should show up in my computerAnd yes, when you open the Zen from there it WILL say not correctly connectedBecause the firmware is corrupted! But it is connected Go to the firmware file and double click, the firmware software will connect to the ZenAnd overwrite the firmware. Follow the on screen instructionsYou may get a warning that the firmware is the same version etc. just do it, as at the moment the Zen is useless. Good luck and if it works repay me by helping someone

My Zen Touch is stuck in recovery m

Hi?My Zen Touch is stuck in Recovery mode, it's deleted it's firmware and can't seem to load anymore. The PC knows it's connecting, because it opens Media Player 0, but Media Player says it's not connected. Creative's advice was to: - . Uninstall all Creative software & drivers
2. If you have Windows Media Player installed then uninstall both it
and Windows Media Player runtime (will require a reboot for each
process). This is done by going to the Add/Remove programs and
uninstalling (This will put your PC back to WMP0).
3. Re-install the Zen Touch drivers from the Creative website and reboot
4. Plug the Zen Touch in.
5. Make sure you have the firmware update ready, run it but do not click
on the language bit yet, leave the mouse hovering over your language
selection.
6. On the Zen Touch's Rescue Mode, select "Reload OS"?
7. As soon as it flashes up "Reload new firmware now via USB" click the
language button
8. The PC should find it and allow you to re-load the firmware. (This
may take a few attempts)
9. Once complete, click close and restart the PC. Everything should now
be fine.
0. Once you are happy you can re-install WMP and it will work fine.
If the following steps doesn't work, do try the steps on another
computer if possible.
It didn't /doesn't work. Can anybody tell me how to recover the **bleep** thing?Latest advice from Creative? Buy a new one!!!

Sounds like the hard dri've heads are jammed. Do you get a faint clicking followed by the recovery menu on bootup?
You can try the advice here, at your own risk.

My iPod touch is stuck in recovery mode and my lock button is broken what do I do

My iPod touch is stuck in recovery mode and my lock button is broken what do I do?

What happens when you connect to computer and restore via iTunes?
iTunes: Restoring iOS software
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod touch is stuck in recovery mode with a error code 9

my ipod touch is stuck in recovery mode and when i try to restore it getting an error code 9

Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
From:
http://support.apple.com/kb/TS3694

HT201210 my iPod touch is stuck in recovery mode- it shows the plug and the disk.. please help me to fix this

my ipod touch is stuck in recovery mode... how do i fix this.. my itunes has the latest version

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201263 My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

My iPod touch is stuck in recovery mode and won't restore?

Okay my Ipod Touch is stuck in recovery mode and will not restore because "the ipod software update server cannot be contacted". I have tried to restart my computer, restart my ipod, tried different computers, and re-intalled AND updated my itunes and it still will not restore. It is stuck on the picture of the usb cable pointing to itunes and won't do anything else. I'm trying to restore it because my memory was full and I wanted to clean it out and now the ipod is useless, please help me restore it!

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

IPod touch 4G stuck in recovery mode- it won't even go into DFU

When I accidentally disconnected my iPod touch 4G during an update yesterday, it automatically went into recovery mode (the screen with the USB cable pointing up towards an iTunes logo). Now it won't turn off, it is recognised by neither my laptop nor by iTunes, it won't even go into DFU, so there's absolutely no way, as far as I can tell, to fix it. I've looked all over the internet, and the only other person I can find who has experienced a similar problem hasn't received an answer in about a year. (https://discussions.apple.com/message/17278012?searchText=iPod%20touch%204G%20st uck%20in%20recovery%20mode-%20won't%20even%20go%20into%20DFU#17278012https://dis cussions.apple.com/message/17278012?searchText=iPod%20touch%204G%20stuck%20in%20 recovery%20mode-%20won't%20even%20go%20into%20DFU#17278012)
/message/17278012?searchText=iPod touch 4G stuck in recovery mode- won't even go into DFU#17278012https://discussions.apple.com/message/17278012?searchText=iPod touch 4G stuck in recovery mode- won't even go into DFU#17278012This is the first time I've had any issues like this, and my iPod isn't jailbroken, so I don't see why it should have happened at all, but its really driving me round the bend. Any help would be much appreciated.

Did you try the bold
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Zen Touch is Stuck in Recovery M

My Zen Touch froze while playing. I rebooted and have been stuck in Recovery Mode. When connected to my computer, the computer knows the player is there but cannot download the music library or communicate with the player. I have tried the cleanup and reboot options and all I hear is a clicking sound followed by a beep which eventually sto
ps.
I rather not reformat since I am on vacation and do not have my disk. I do not see the compete drivers and firmware files posted on Creative's site, only updates. Any other ideas short of reformating or do you know where the compete files are located on Creative's site.
Paul

Sounds like the hard dri've heads are jammed. Do you get a faint clicking followed by the recovery menu on bootup?
You can try the advice here, at your own risk.

Zen vision:m, stuck in recovery mode and cant press "ok&qu

My zen vision:m is stuck in recovery mode. The real problem I have though is that I cant press the touch button and choose a alternati've. I can scroll and everything, but I just can't press "ok". Anyone have an idea of what I can do to fix this?

Did you try to revert to Windows Media Player 0 by removing WMP and WMP Runtime ? Then try to add your firmware. It worked for me on a couple of other Creative players and when I was trying to reload firmware, and install the Vision M. Seems to me that I also removed all the Creative software one time, but try reverting to WMP 0 first.
luvmyrescuedogs

My iPod Touch is stuck in recovery mode after I left it on while updating!!!

I was updating my ipod touch 3rd generation (ios 4.3, i think) and I saw a wasp and left the computer on in the middle of the updating process and now the ipod is stuck in recovery mode and it says the only way to get it out is to recover it, but that will erase everything!!! HELP ME!!! until i get an answer      I HATE YOU, APPLE URGG
operating system: whatever the latest available to itouch is.

Without knowing what the error message said all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iPod touch is stuck in recovery mode, help?

A few hours ago, I tried updating my 5th generation iPod touch to iOS 8. It ran into an error and couldn't update, which left my iPod touch stuck in recovery mode with a screen showing a USB cord pointing to an iTunes symbol. I tried searching for ways to get my iPod out of recovery mode without restoring it to its factory settings, but after a couple hours of seeking, I decided I might as well just restore it. I clicked the restore button, and when it finished, it said that my iPod touch couldn't be restored either. Now, I have no clue what to do. May I have some help?

That error is covered here:
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support
If iTunes can’t communicate with the update server, you may see one of these messages.
Error 17
Error 1639
Errors 3000-3020
Error 3194
Errors 3100-3999
This device isn't eligible for the requested build

My ipod touch is stuck in recovery mode I tried RecBoot and the reiBoot both fail to get me out of recovery I get error 28 instad now what?

My ipod Touch 2nd Gen 8GB is stuck in recovery mode I tried RecBoot and when that couldn't do it I tried reiBoot both failed to fix my problem what do you suggest?

Start off with some basic steps:
- Make sure iTunes is up to date
- Try another usb cable
- Try another usb port
In the article Resolve iOS update and restore errors this is what it says about error 28:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

Creative zen touch 40 gb stuck in recovery mode! H

Similar Messages

Maybe you are looking for