Creative Zen touch freezing when connecting to

Apologies if this problem has been raised time and time before.
Just bought a new PC (with loads of pre-installed rubbish on), and i've installed the most uptodate version of Creative Mediasource, Nomad etc. However when i connect my mp3 to the PC, Mediasource and Nomad is not detecting it. Mediasource gives me a "Player is not connected" error. However on rare occsions, it does manage to detect the mp3 player but when i disconnect and try to re-connect, the problem re-occurs.
I've made sure all the drivers are uptodate, and made sure all the software (Mediasource, Nomad) have been uninstalled and installed, again and again. But my PC is just not detecting.
Another thing i've noticed is that, when the mp3 player is connected, when I open up 'My Computer' - this window seems to just freeze and hang there while its saying "searching for items". Not sure if this is because the mp3 is connected.
I cannot understand why this is happening, though someone mentioned that there is some software called Sonic MyDVD or Sonic DLA. Not sure though, although I have these installed on my computer. I'm currently trying to uninstall them, but having trouble.
Any help is much appreciated.
Thanks,
Michael

i had the same problem. drove me nuts............for 6 months. then I got crazy and tried sanding the usb plug ( the male end that fits into player itself. ...............Botabing.....it worked , stays connected now.
May work for you too! oh I used 400 grit sand paper

Similar Messages

Zen Touch freezing when trying to connect to USB 2.0 Help plea

I have a strange problem with my Creative Zen Touch 20GB. It freezes everytime when I try to connect it to my USB2.0 controller PCI card. After that I have to disconnect the player and push the reset-button. On my USB . onboard-controller the player works fine, but it's not a problem with the PCI-Card I guess, because any other device like USB2.0 external hard dri'ves and USB-sticks work fine with it.
I have Windows 98 SE installed on my computer.
Can anyone help me out with that problem please?

i had the same problem. drove me nuts............for 6 months. then I got crazy and tried sanding the usb plug ( the male end that fits into player itself. ...............Botabing.....it worked , stays connected now.
May work for you too! oh I used 400 grit sand paper

Creative Zen Micro - Freezes when 'Rebuilding Library', does this spontaneous

I'll make this post short and sweet.
Yes, I have read the FAQ.
I'm just wondering, its happened to me twice now that when i turn on my zen micro, it goes straight to the rebuilding library screen, and when the bar gets to the end it just freezes. Replacing the battery does not help. Only until i attach it to my computer at home does the library finish rebuilding. And no, on both occasions the battery was not dead. I just found out now about recovery mode and disk cleanup.
Now, considering this disk cleanup fixes the problem next time it arrises, why is this problem happening in the first place? How can I avoid it from happening?
I'll probably be returning this product if I'm forced to replace the battery etc each time i want to use it.
Sorry for my broken english

I have had a very similar problem with my 5GB Zen Micro. I have not added music to the player in weeks but during a cold boot a couple of times a week the player will not start clean, many times hanging at the end of a library rebuild.
The player is always shutdown orderly, though most of the time it's via the 4 hour firmware shutdown included in the ..0 firmware. Each time it hangs I boot to rescue mode, run a clean-up, then reboot. During the reboot it always runs a successful rebuild, so I wonder, why didn't it do that last time and why does it keep acting up when nothing has been added or deleted to the player?
One additional note, sometimes during the boot it will hang with the ZEN screen only partially displayed.
I just deleted the firmware and reloaded ..0. Hopefully this fixes it, but stay tuned for updates...
Thanks,Doug

Connecting Creative Zen Touch to Stereo (Bose Lifestyle Syst

Hi Folks,?A bit of a naf question, I want to connect my Creative Zen Touch to a Bose Life Style System, To provide the best quality Audio connection can you advise what is the best cable for me to use. On a seperate note has anyone any comments on the Cambridge SoundWorks Dock Station, I would like something to connect the Zen Touch to for the kitchen, the cambridge sounddock id a bit of an ugly beast. Is there anything a little easier on the eye but with the same excellent audio quality. Thanks in advance for any help?Earlsie

scorpian007 wrote:
If you have RCA inputs on your stereo, just buy a 3.5mm to 2 RCA cable and connect it that way. If not, buy an FM transmitter, connect it to the headphone jack on your Zen Touch, set it to a channel and then tune into that channel on the stereo's radio.
Hope that hel
ps.
Here's a pic & link too:
http://www.radioshack.com/images/ProductCatalog/ProductImage/42/42-2483.jpg">
You can buy it at any RadioShack (in America) and in Canada I would assume FutureShop would have it as well as any local electronics store.

Having Trouble with Creative Zen Touch 20G

Hey everybody. I bought me a 20G Creative Zen Touch (you know, the one where the scroll thing is in the middle of the player, vertically?). Anyway, i bought it a couple of weeks ago and it's pretty **bleep** cool. No problems with it.....until today. I was watering the lawn, listening to my music (no, it didn't get wet), when all of a sudden it stopped working all together. Well, at first i saw some "Voice Recording" thing i had never seen before and no matter what i pushed, nothing happened. I couldn't even turn it off. I tapped it on the side, then it began working again. I decided to shut it off and put it in my room. Later when i went back to it,it wouldn't turn back on at all!!! Even though it's battery was charged, i decided to plug it into the charger where, once i plugged it in, i got a screen that said:
<EM>"CREATIVE ZEN</EM>
<EM>Copyright (c) 2004</EM>
<EM>Creative Technology Ltd.</EM>
<EM>All Rights Reserved"</EM>
And thats how it is currently: Nothing at all happens when it's disconnected from the charger and i try to turn it on. When connected to the charger, i get said screen, but thats it. No music, not even the blue backlight or the blue blinking light on the power button indicating that it's charging. :smileyindifferent:
Can someone tell me what's going on/how to fix this? We have been getting unbelievably hot weather here in So. Cal and i have the feeling that the hot temperature may have something to do with this. I've tried keeping the player in the coolest place in the house (besides the freezer) which would be near a fan so it could be in a cooler place, but even leaving it in such place for a couple hours isn't helping me.

Hey buddy
same problem with me. The zen got little moist due to rain, after that it froze at the 'Creative screen' that too comes on when i connect it to charger. I disconnected the battery, it worked for a while but it is back to same position now. It dosent responds to resetting pin... nothing happens it is dead. Only when i disconnect battey and connect charger ... give it a big whack it works for a while then hangs again.
Still trying my stuff on it. Otherwise i will format it and reload the firmware later on.
if u get any solution let me know on [email][email protected]][email protected][/url]
thankx

Creative Zen Touch stuck in Recovery M

Bear with me please since my english is not the best, but I'll try to explain my problem as good as I can.
Both me and my girlfriend have Creative Zen Touch mp3-players, and yesterday we were gonna update the firmware on both of them. We went to the Creative support page download-section and downloaded the latest one. When we were gonan install it it gave us the message that all data would be removed and that was fine with us since we already had plans about removing most of the music and replace it with new tunes. But when we were installing the firware it statrted out just fine but then when it said "Player is being rebooted, please wait..." (or something like that) it just was like that for a long time. After 20 minutes my patience ran out and I unplugged my device and tried with my girldfriends instead. Same thing happened with hers so now both our players are stuck in recovery mode with no firmware what so ever in them. I tried installing the firmware once again on both of them but now it can't the firmware just says my device isn't plugged in even though it is and my computer finds it as soon as I plug it in.
I contacted support and they told me to uninstall everything that has to do with the player and also remove Windows Media Player and all of its components. The reinstall the drivers and restart my computer. Then I should wait until my device told me to updtae the firmware to press the language selection on the firmware update. I did all of this but the firmware upadate still says my player isn't connected. This happens with my girldfriends player too, so it can't be any defect on the device.
So right now we're sitting on two mp3 players that are useless since they are stuck in recovery mode with no firmware. Please help me if you can and please keep in mind to not use too difficult english words. Thanks in advance!
Worth mentioning is that I've tried both the old and new firmware updates just to get it going and no one worked.
LukinMessage Edited by Lukinx on 07-7-200706:0 AM

Can't believe no ones answered this, check this thread ttp://forums.creative.com/showthread.php?=94247 then look for Rich's post in the thread, check his link for more info.
Basically uninstall wmp, and it's run time and reboot
Be using XP
try to install creatives latest plays for sure software suite (it will fail)
Don't unplug the player just reboot
Player should be found, ignore all messages of any kind
Go to FW update and double click it
Hopefully breathe a happy sigh of relief.
Creative you really are a bunch of toerags
Message Edited by Del369 on 07-7-200702:23 PM

Recharging the Creative Zen Touch via

Hello Users,
since I upgraded to Vista, I also needed to install the new PlaysForSure-Firmware on my Creative Zen Touch. Afterwards I was unable to recharge the battery via USB. I connect the player as usual but the little loading symbol on the screen won't show up and even after 2 or more hours of waiting, the battery didn't recharge. I also already tried resetting the player.
Is there any way to fix that problem without buying a new recharge-cable. The battery is empty right now and it is not possible to start the player.
Thanks for your help,
Dr_Enquinox

If you mean the power adapter, then I would/can only recommend the official ones. If others want to recommend or point to unofficial ones that is okay, but we do not support those and have not tested them.
The cable you use to connect to the PC is a standard USB to mini-USB cable, you should be able to get that in any electronics/computer store.
When you connect the player to the PC, is there any sign that it is recognised? Does it show up in the Device Manager?
Cat

Creative zen touch chronic problem

This problem has been bugging me ever since I first receive creative zen touch 20 gb, and make me change to another brand, and leave this unit in the warehouse The problem is the back button and the next track button has been annoyingly randomizing all tracks, so I GET tracks randomized almost all the time Upgrading firmware doesn't fix it, creative lousy customer support in my country even make me more nausous I bought it in 2004 and since then, I never wanna buy another creative product Recently someone mention how to fix this button problem, but the link he provided is dead, can someone enlight me ?

Special_Ed wrote:
My Zen Touch stopped working on me, I formated it, nothing, then clean it up, still nothing. So deleted my firmware to try to update it. Had the update downloaded, connected my mp3 player opened the update and it says my player is not connected, please connect player. Then when I checked my player it said Creative Zen Touch v0.0.0That # is the version # for the recovery mode. I take it you had the Plays for sure firmware 2..0. You can't update the firmware on Vista. Must be done on a XP computer with WMP0 NOT WMP? Find it here http://support.creative.com/Products...me=MP3+Players
Message Edited by coachop94 on 2-20-2008 04:44 PMMessage Edited by coachop94 on 2-20-2008 04:49 [email protected]

Creative Zen Touch DAP-HD0014

Hi, I have a problem with this, when it boots up it says firmware problem and boots to recovery mode. I've downloaded the firmware and am unable to update it as there is a message saying not connected. I have tried USB ports on front & rear on my PC and with different cables. Any ideas would be gratefully received!

The zen touch has to to be installed as a?WPD instead of a MTP. The process of rolling back the windows media takes out the auto to make it's a MTP.
So I suggest to the creative dudes is make a driver that loads the players as a WPD and the upgrade will work on all the players.
Everybody that lets it load as a MTP will never get the Upgrade button to work.
Very simple problem. Yes. But how do you get it to install as creative zen touch WPD. You will have to do alot of things to your computer and then luckily it will load as a WPD.
I am asking the creative team to modify the Upgrade installer to recognize the new MTP for the Upgrade installer the simplest solution. Alittile GIU programming guys.
I await the the new Upgrade installer.
PS The whole purpose for the upgrade is to be in MTP mode. Once it reboots the first time the upgrade installer should recognize the player as a MTP no matter what! Then we could hit the upgrade buton to install the firmware 2..0.
Hellloooooo

Creative Zen Touch Firmware Upgrade version 1.01

Hi Everyone,
Just to make you aware, a new Zen Touch firmware has been posted on our site:
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenTouch_PCFW_L4__0_03.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENT-FWARE--L4
<DIV id=ShortDesc>This firmware upgrades your Creative Zen Touch player for improved functionality.
<DIV id=Fixes>
<EM>Fixes:</EM>
Improves player functionality when the Random and Next buttons are pressed.
Resets the Custom EQ settings when resetting your player's settings.
Improves the display order of the Touch Pad sensitivity settings.
Improves the continuous playback of WMA and MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition (Me)or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Touch installed</LI>
<EM>Note:</EM>
To install this firmware update, do the following:
Download the ZenTouch_PCFW_L4__0_03.exe file into your local hard disk.
Connect the player to your computer.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI></TD></TR></TBODY></TABLE>
Cat

'Thanks a million for the link, KokChoy-CL! You are now on my X-mas present list.
I have been using the .0.03 firmware, but recently I read http://forums.creative.com/t5/MP3-Players/Zen-Touch-Custom-EQ-Frequencies-Wrong/m-p/64205" and wanted to try out the .00.06 firmware. Comparing from memory and using custom EQ, lows and mids sound much more clear now while bass is a bit more on the light side.

Help with my Creative Zen Touch (20

Hi everybody, I bought my Creative ZEN (20Gb) Touch in October.
For the first month it worked very well, and I was glad I bought it instead of an iPod (I've never liked them).
Anyway three weeks ago the display froze on a playlist while I was listening to it (none of the buttons worked), so I let the battery run down and after a couple of days it recovered and restart working.
This happened to me again last week, so I let the battery run down and, after charging it, it worked.
On friday I connected it to the usb cable, so I could use NOMAD Explorer. When I connected it (the first time) it was turned off but it turned on. I turned it off, anyway. After connecting it, the Nomad Explorer didn't work as if I haven't connected the Zen Touch to the cable. So I tried a couple of times to connect and disconnect the cable from the Zen Touch, and after that the on/off button was illuminated like it was on charge or connected to the cable - but it wasn't flashing, it was just a permanent light.
So I decided to use the same method I used the first two times I had some problems - but the battery didn't run down! Or maybe it did, but the light is still there, and my mp3 doesn't work. Now it's been four days, and this is the third time I had a problem with my mp3 player - I've been owning it just for three months! What should I do for make it start working?
How can I reset it's And if I do, am I going to lose any of my files?

if it crashes theres a small hole on the same side as the volume put a pin in you should feel a click if done correctly. it should then start up. as for your nomad explorer problem you should still be able to access your player from "my computer" there should be your dri'ves, nomad explorer and creative zen touch try getting to it through "creative zen touch. if none of that works maybe try removing all the software and install it all again. maybe update there firmware. oh if you have firmware version 2 nomad wont work. i miss it too. dont lose faith i've had mine for over a year now and had (and still am having) just about every problem. hope that helps Sm: )er

Creative Zen Touch vista problem.

My Zen Touch stopped working on me, I formated it, nothing, then clean it up, still nothing. So deleted my firmware to try to update it. Had the update downloaded, connected my mp3 player opened the update and it says my player is not connected, please connect player. Then when I checked my player it said Creative Zen Touch v0.0.0.

Special_Ed wrote:
My Zen Touch stopped working on me, I formated it, nothing, then clean it up, still nothing. So deleted my firmware to try to update it. Had the update downloaded, connected my mp3 player opened the update and it says my player is not connected, please connect player. Then when I checked my player it said Creative Zen Touch v0.0.0That # is the version # for the recovery mode. I take it you had the Plays for sure firmware 2..0. You can't update the firmware on Vista. Must be done on a XP computer with WMP0 NOT WMP? Find it here http://support.creative.com/Products...me=MP3+Players
Message Edited by coachop94 on 2-20-2008 04:44 PMMessage Edited by coachop94 on 2-20-2008 04:49 [email protected]

CREATIVE ZEN TOUCH - CUSTOMER SERVICE WONT H

CREATIVE, i will never ever buy another product from you again and will encourage all others not to buy from you because of your poor customer service. My problem is not with the product as such, i own a Creative Zen Touch and until about?6 weeks ago everything was going fine, when i formatted my harddri've. It was then i relised i had misplaced my Zen Touch software CD, so as you'd expect the first place to look would be this website.. off i go looking around the store and customer support, i even sent an email.. to be fair i did receive an automated response about tunring off the Zen and trying again (useless when i need a software cd howevere), so i waited a while (a week) to see if they'd reply - which they didn't. So, i then sent another which ended with the same result., and then again with the same results. Just now i finally called customer support (paying intl call-rates) and all i got was an automated response telling me to log onto the customer-support page on the website. ARGHH!!?Basically if anyone, ANYONE can please please tell me where i can get the Creative Zen Touch software CD it would very very very very very appreciated as i go on holiday in two weeks and i don't really want to fork out more cash on an I-Pod or I-Pod alternati've (never again will i buy Creative). Angry-customerMessage Edited by angry-customer on 03-29-20060:46 PM

Clearly, this is not true.
Despite seeing everywhere that "firmware available via USB from creative.com" the Creative Sleek Photo has no firmware that is available online anywhere and when you ask, everyone from customer support talks to you as if you have 5 heads for even suggesting that it should be available like anything else is.
This IS ridiculous and I too, have no more interest in Creative products despite purchasing my last 2 MP3 players from this brand, I'm done with this mess. It's frustrating beyond belief that a simple fix turns into a huge fiasco all because the company has no real rhyme or reason for failing to offer any support for a product, instead forcing you to send said product in the mail to take weeks for something that otherwise take a few minutes.
Truly absurd.

Creative ZEN TOUCH and Macs, plz h

Hi,
I am considering buying a Creative Zen Touch and would like some help
I was wondering if anyone could answer this for me, and yes, I have the read the FAQ and about Macs and how it isnt officially supported, yada yada
What I would like to know is, I have a PC at home which I will use to transfer music
HOWEVER
At Uni'versity, I am forced to use a Mac computer. What I want to know is, I would like to use the Zen Touch as a portable hard dri've so I can copy my homework (not mp3s, but school work) on to the Zen Touch, then go to Uni'versity, plug in the mp3 player into the Mac and access my DATA files from the Mac WITHOUT having to install any software (i.e. plug n play)
Thanks,

peterh85,
I'm afraid you can't. The player will need driver and application installed in order to link up with the computer for file transfer. Even when MTP firmware is available, you will need to be using Windows XP and Window Media Player 0 to interact with the player.
Jason

Creative Zen Touch no longer docking; problem has appeared out of the bl

For the last couple of years, I've used my Creative Zen Touch without any issues. I managed to upgrade to the MTP firmware with no troubles whatsoever. When I tried to plug it in a few days ago and add a number of songs, the computer no longer recognised the player. The USB ports seem fine, and when I plug it in the player boots. It doesn't come up with the "docked" screen on the player, however, and in Windows a "trying to add new hardware wizard" window pops up that never used to pop up before. Whatever I try to do, it never works. I'm using Windows XP SP2 and like I said, I never used to have any issues before until this popped out completely unexpected. It just won't realise that the Zen Touch is a MTP player for some reason!

The people on the forum who would respond are customers, like you, being rude to them probably won't encourage them to help.
These two pages contain some useful tips, have you checked these yet?
http://us.creative.com/support/kb/ar...p?l=2&sid=0053
http://us.creative.com/support/kb/ar...p?l=2&sid=9287
Cat

Creative Zen touch freezing when connecting to

Similar Messages

Maybe you are looking for