Creative Zen Touch & Mac OSx comput

Hi, I have been given a Apple Mac OSx powerbook laptop.
I have downloaded my Creative Media Source onto my work computer (normal PC), but I tried to put the same disk into my laptop last night and it did not work. Is Creative compatable with Apple Mac? Does anyone know if i can buy a disk?
thanks,
Megan.

Hi Megan-
As far as I can tell the Zen Touch is not compatible with OS X right out of the box. At least I couldn't get mine to work on one.
But my Zen Nano Plus works in OS X.
If it's a new Mac you may have to look into installing Bootcamp and loading Windows XP on it to get it to work.

Similar Messages

I just reset my computer How do i get the music from my Creative Zen Touch onto my computer aga

Hi, I just had to reset my computer and i lost all my music... how do i get the music from my Creative Zen Touch onto my computer so i can listen to music again on my computer?

itsVASH,
Basically you do the reverse of how you got it onto the player to begin with. You will open up mediasource, select the Zen Touch in the left hand source window, select PC Music Library on the right hand side. Select your songs and press the arrow pointing to the right.
Jeremy

Creative ZEN TOUCH and Macs, plz h

Hi,
I am considering buying a Creative Zen Touch and would like some help
I was wondering if anyone could answer this for me, and yes, I have the read the FAQ and about Macs and how it isnt officially supported, yada yada
What I would like to know is, I have a PC at home which I will use to transfer music
HOWEVER
At Uni'versity, I am forced to use a Mac computer. What I want to know is, I would like to use the Zen Touch as a portable hard dri've so I can copy my homework (not mp3s, but school work) on to the Zen Touch, then go to Uni'versity, plug in the mp3 player into the Mac and access my DATA files from the Mac WITHOUT having to install any software (i.e. plug n play)
Thanks,

peterh85,
I'm afraid you can't. The player will need driver and application installed in order to link up with the computer for file transfer. Even when MTP firmware is available, you will need to be using Windows XP and Window Media Player 0 to interact with the player.
Jason

Creative zen touch for mac o

Hi, I just bought a mac (with os x) and i have my creative zen touch, but i cant seem to find any software for it to work together. I cant be the only one with this problem, what do i do?

To my knowledge there is currently no software support for the Zen Touch for any Mac OS, including OS X. If you purchased your player recently it's likely to have the Plays for Sure firmware installed, which will only work with Microsoft Windows XP Home and Pro with Windows Media Player 0 or higher.
I looked for Mac supporting drivers at onetime across the internet, but the ones i found were incredibly buggy and of course were third-party and not from Creative. Unless there has been an update on the "support" section for Mac applications, you're pretty much stuck unless you can find third-party software for your Mac.Message Edited by 2027746 on -9-20060:28 PM

Creative zen touch problem - mediasource says it's emp

i've had my creative zen touch for more than a year and a half and used it every day with it working fine. a couple of weeks ago mediasource loaded it as empty on my pc. however all my music is still on it and i can play directly from the player but not through my computer. i've tried opening the player through other programs but this doesn't work either. i've tried uninstalling and reinstalling all of the creative software that came on the cd with it (mediasource, nomad explorer etc.) but it hasn't worked. does anybody know why this is and how i can fix the problem it's a bit annoying because i can't put any new music on it. thanks very much in advance. jonny.

Hello Roknoch,
Welcome to Creative forums!
You might want to check on these threads:
Scroll Pads gone Bad
ZEN touch: Button on face not responding

Creative Zen Touch stuck in Recovery M

Bear with me please since my english is not the best, but I'll try to explain my problem as good as I can.
Both me and my girlfriend have Creative Zen Touch mp3-players, and yesterday we were gonna update the firmware on both of them. We went to the Creative support page download-section and downloaded the latest one. When we were gonan install it it gave us the message that all data would be removed and that was fine with us since we already had plans about removing most of the music and replace it with new tunes. But when we were installing the firware it statrted out just fine but then when it said "Player is being rebooted, please wait..." (or something like that) it just was like that for a long time. After 20 minutes my patience ran out and I unplugged my device and tried with my girldfriends instead. Same thing happened with hers so now both our players are stuck in recovery mode with no firmware what so ever in them. I tried installing the firmware once again on both of them but now it can't the firmware just says my device isn't plugged in even though it is and my computer finds it as soon as I plug it in.
I contacted support and they told me to uninstall everything that has to do with the player and also remove Windows Media Player and all of its components. The reinstall the drivers and restart my computer. Then I should wait until my device told me to updtae the firmware to press the language selection on the firmware update. I did all of this but the firmware upadate still says my player isn't connected. This happens with my girldfriends player too, so it can't be any defect on the device.
So right now we're sitting on two mp3 players that are useless since they are stuck in recovery mode with no firmware. Please help me if you can and please keep in mind to not use too difficult english words. Thanks in advance!
Worth mentioning is that I've tried both the old and new firmware updates just to get it going and no one worked.
LukinMessage Edited by Lukinx on 07-7-200706:0 AM

Can't believe no ones answered this, check this thread ttp://forums.creative.com/showthread.php?=94247 then look for Rich's post in the thread, check his link for more info.
Basically uninstall wmp, and it's run time and reboot
Be using XP
try to install creatives latest plays for sure software suite (it will fail)
Don't unplug the player just reboot
Player should be found, ignore all messages of any kind
Go to FW update and double click it
Hopefully breathe a happy sigh of relief.
Creative you really are a bunch of toerags
Message Edited by Del369 on 07-7-200702:23 PM

Creative Zen Touch 20GB - Windows Vista

(Creative Zen Touch 20GB - Windows Vista6 Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob

Pob wrote:
Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob
This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

Creative Zen Touch no longer docking; problem has appeared out of the bl

For the last couple of years, I've used my Creative Zen Touch without any issues. I managed to upgrade to the MTP firmware with no troubles whatsoever. When I tried to plug it in a few days ago and add a number of songs, the computer no longer recognised the player. The USB ports seem fine, and when I plug it in the player boots. It doesn't come up with the "docked" screen on the player, however, and in Windows a "trying to add new hardware wizard" window pops up that never used to pop up before. Whatever I try to do, it never works. I'm using Windows XP SP2 and like I said, I never used to have any issues before until this popped out completely unexpected. It just won't realise that the Zen Touch is a MTP player for some reason!

The people on the forum who would respond are customers, like you, being rude to them probably won't encourage them to help.
These two pages contain some useful tips, have you checked these yet?
http://us.creative.com/support/kb/ar...p?l=2&sid=0053
http://us.creative.com/support/kb/ar...p?l=2&sid=9287
Cat

How to transfer files from Creative Zen Touch to Creative Vision:

Is there a way to transfer my music files from my Creative Zen Touch to my Vision:M?If so, can someone tell me how to do this. ?I know this has probably been asked before but I am new on this message board and am in need of assistance. It would be greatly appreciated. Thanks

If you have both the player and you're using MediaSource, just connect both the player to the computer, select one of the player as source and the other as destination and just transfer over it. Note, protected content will not be transfer over though.
JasonMessage Edited by Jason-CL on 03-27-2006 06:54 PM

PLEASE HELP - Serious problem with my Creative Zen Touch firmware

Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

Recharging the Creative Zen Touch via

Hello Users,
since I upgraded to Vista, I also needed to install the new PlaysForSure-Firmware on my Creative Zen Touch. Afterwards I was unable to recharge the battery via USB. I connect the player as usual but the little loading symbol on the screen won't show up and even after 2 or more hours of waiting, the battery didn't recharge. I also already tried resetting the player.
Is there any way to fix that problem without buying a new recharge-cable. The battery is empty right now and it is not possible to start the player.
Thanks for your help,
Dr_Enquinox

If you mean the power adapter, then I would/can only recommend the official ones. If others want to recommend or point to unofficial ones that is okay, but we do not support those and have not tested them.
The cable you use to connect to the PC is a standard USB to mini-USB cable, you should be able to get that in any electronics/computer store.
When you connect the player to the PC, is there any sign that it is recognised? Does it show up in the Device Manager?
Cat

Creative zen touch chronic problem

This problem has been bugging me ever since I first receive creative zen touch 20 gb, and make me change to another brand, and leave this unit in the warehouse The problem is the back button and the next track button has been annoyingly randomizing all tracks, so I GET tracks randomized almost all the time Upgrading firmware doesn't fix it, creative lousy customer support in my country even make me more nausous I bought it in 2004 and since then, I never wanna buy another creative product Recently someone mention how to fix this button problem, but the link he provided is dead, can someone enlight me ?

Special_Ed wrote:
My Zen Touch stopped working on me, I formated it, nothing, then clean it up, still nothing. So deleted my firmware to try to update it. Had the update downloaded, connected my mp3 player opened the update and it says my player is not connected, please connect player. Then when I checked my player it said Creative Zen Touch v0.0.0That # is the version # for the recovery mode. I take it you had the Plays for sure firmware 2..0. You can't update the firmware on Vista. Must be done on a XP computer with WMP0 NOT WMP? Find it here http://support.creative.com/Products...me=MP3+Players
Message Edited by coachop94 on 2-20-2008 04:44 PMMessage Edited by coachop94 on 2-20-2008 04:49 [email protected]

Creative Zen Touch DAP-HD0014

Hi, I have a problem with this, when it boots up it says firmware problem and boots to recovery mode. I've downloaded the firmware and am unable to update it as there is a message saying not connected. I have tried USB ports on front & rear on my PC and with different cables. Any ideas would be gratefully received!

The zen touch has to to be installed as a?WPD instead of a MTP. The process of rolling back the windows media takes out the auto to make it's a MTP.
So I suggest to the creative dudes is make a driver that loads the players as a WPD and the upgrade will work on all the players.
Everybody that lets it load as a MTP will never get the Upgrade button to work.
Very simple problem. Yes. But how do you get it to install as creative zen touch WPD. You will have to do alot of things to your computer and then luckily it will load as a WPD.
I am asking the creative team to modify the Upgrade installer to recognize the new MTP for the Upgrade installer the simplest solution. Alittile GIU programming guys.
I await the the new Upgrade installer.
PS The whole purpose for the upgrade is to be in MTP mode. Once it reboots the first time the upgrade installer should recognize the player as a MTP no matter what! Then we could hit the upgrade buton to install the firmware 2..0.
Hellloooooo

Creative Zen Touch Firmware Upgrade version 1.01

Hi Everyone,
Just to make you aware, a new Zen Touch firmware has been posted on our site:
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenTouch_PCFW_L4__0_03.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENT-FWARE--L4
<DIV id=ShortDesc>This firmware upgrades your Creative Zen Touch player for improved functionality.
<DIV id=Fixes>
<EM>Fixes:</EM>
Improves player functionality when the Random and Next buttons are pressed.
Resets the Custom EQ settings when resetting your player's settings.
Improves the display order of the Touch Pad sensitivity settings.
Improves the continuous playback of WMA and MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition (Me)or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Touch installed</LI>
<EM>Note:</EM>
To install this firmware update, do the following:
Download the ZenTouch_PCFW_L4__0_03.exe file into your local hard disk.
Connect the player to your computer.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI></TD></TR></TBODY></TABLE>
Cat

'Thanks a million for the link, KokChoy-CL! You are now on my X-mas present list.
I have been using the .0.03 firmware, but recently I read http://forums.creative.com/t5/MP3-Players/Zen-Touch-Custom-EQ-Frequencies-Wrong/m-p/64205" and wanted to try out the .00.06 firmware. Comparing from memory and using custom EQ, lows and mids sound much more clear now while bass is a bit more on the light side.

001 Creative Zen Touch 4

I just bought a creative Zen touch 40 GB , and i'm moving- using nomad explore -some mp3 files from my Win XP computer to the MP3 player. and in the middle it gives me an error that something wrong happened.
then i tried to unplug the usb cable and plug it again, this makes it work, but the problem is that this error happenes alot .
can any one help?

Make sure you have the latest drivers, firmware and software from Nomadworld.com downloads.

Creative Zen Touch & Mac OSx comput

Similar Messages

Maybe you are looking for