Creative Zen Touch USB M

I have a Xbox 360, and i am told (via the manual, on-line manuals, and various other publications) that my music can be streamed from the player. However, it tells me that i need it to be in USB mode and the life of me i dont know how to do that.
I have it connected up as advised (the same way that it would be connected on a PC). Anybody give me any advice on the matter?
Many Thanks.

To use a player on the Xbox 360, it needs to be either a USB mode device (like a flash player, that works like an external dri've), or an MTP device. The Zen Touch does not work as an external USB dri've, so you would have to update it to an MTP firmware instead. This firmware is available on the downloads page, but read the details fully, as this will alter the firmware on the device, format the contents, and the process is not reversible.
Cat

Similar Messages

Creative Zen Touch USB Docking Probl

Hi and thanks for looking:
I was trying to dock my Creative Zen Touch a few minutes ago, the way I usually do:
. I have Creative MediaSOurce open
2. I plug the USB cable into the Zen
3. It's docked.
But that didn't work. The "DOCKED" screen came up on my Zen for about 2-3 seconds, then went away and went back to Now Playing. Now, this sometimes happens, but if I reset the MediaSource software and plug it in again, it is usually all set, but no. I've tried over 20 times, with different USB cables too, but I just can't get anything to dock. I'm going to try on another computer and if I can get it to work, I'm planning on backing up everything I have on it. I don't want to reset my 3000 songs that are on my Zen, so if anyone has any solution to this problem, I could really use some help. Thanks!!

well with my micro, logging off other users and removing other background programs, real player etc.. sometimes seemed to help. try restarting your system.
I believe that recently rolling back from WMP affects the vision

CREATIVE ZEN TOUCH - CUSTOMER SERVICE WONT H

CREATIVE, i will never ever buy another product from you again and will encourage all others not to buy from you because of your poor customer service. My problem is not with the product as such, i own a Creative Zen Touch and until about?6 weeks ago everything was going fine, when i formatted my harddri've. It was then i relised i had misplaced my Zen Touch software CD, so as you'd expect the first place to look would be this website.. off i go looking around the store and customer support, i even sent an email.. to be fair i did receive an automated response about tunring off the Zen and trying again (useless when i need a software cd howevere), so i waited a while (a week) to see if they'd reply - which they didn't. So, i then sent another which ended with the same result., and then again with the same results. Just now i finally called customer support (paying intl call-rates) and all i got was an automated response telling me to log onto the customer-support page on the website. ARGHH!!?Basically if anyone, ANYONE can please please tell me where i can get the Creative Zen Touch software CD it would very very very very very appreciated as i go on holiday in two weeks and i don't really want to fork out more cash on an I-Pod or I-Pod alternati've (never again will i buy Creative). Angry-customerMessage Edited by angry-customer on 03-29-20060:46 PM

Clearly, this is not true.
Despite seeing everywhere that "firmware available via USB from creative.com" the Creative Sleek Photo has no firmware that is available online anywhere and when you ask, everyone from customer support talks to you as if you have 5 heads for even suggesting that it should be available like anything else is.
This IS ridiculous and I too, have no more interest in Creative products despite purchasing my last 2 MP3 players from this brand, I'm done with this mess. It's frustrating beyond belief that a simple fix turns into a huge fiasco all because the company has no real rhyme or reason for failing to offer any support for a product, instead forcing you to send said product in the mail to take weeks for something that otherwise take a few minutes.
Truly absurd.

Creative Zen Touch no longer docking; problem has appeared out of the bl

For the last couple of years, I've used my Creative Zen Touch without any issues. I managed to upgrade to the MTP firmware with no troubles whatsoever. When I tried to plug it in a few days ago and add a number of songs, the computer no longer recognised the player. The USB ports seem fine, and when I plug it in the player boots. It doesn't come up with the "docked" screen on the player, however, and in Windows a "trying to add new hardware wizard" window pops up that never used to pop up before. Whatever I try to do, it never works. I'm using Windows XP SP2 and like I said, I never used to have any issues before until this popped out completely unexpected. It just won't realise that the Zen Touch is a MTP player for some reason!

The people on the forum who would respond are customers, like you, being rude to them probably won't encourage them to help.
These two pages contain some useful tips, have you checked these yet?
http://us.creative.com/support/kb/ar...p?l=2&sid=0053
http://us.creative.com/support/kb/ar...p?l=2&sid=9287
Cat

Recharging the Creative Zen Touch via

Hello Users,
since I upgraded to Vista, I also needed to install the new PlaysForSure-Firmware on my Creative Zen Touch. Afterwards I was unable to recharge the battery via USB. I connect the player as usual but the little loading symbol on the screen won't show up and even after 2 or more hours of waiting, the battery didn't recharge. I also already tried resetting the player.
Is there any way to fix that problem without buying a new recharge-cable. The battery is empty right now and it is not possible to start the player.
Thanks for your help,
Dr_Enquinox

If you mean the power adapter, then I would/can only recommend the official ones. If others want to recommend or point to unofficial ones that is okay, but we do not support those and have not tested them.
The cable you use to connect to the PC is a standard USB to mini-USB cable, you should be able to get that in any electronics/computer store.
When you connect the player to the PC, is there any sign that it is recognised? Does it show up in the Device Manager?
Cat

Creative Zen Touch DAP-HD0014

Hi, I have a problem with this, when it boots up it says firmware problem and boots to recovery mode. I've downloaded the firmware and am unable to update it as there is a message saying not connected. I have tried USB ports on front & rear on my PC and with different cables. Any ideas would be gratefully received!

The zen touch has to to be installed as a?WPD instead of a MTP. The process of rolling back the windows media takes out the auto to make it's a MTP.
So I suggest to the creative dudes is make a driver that loads the players as a WPD and the upgrade will work on all the players.
Everybody that lets it load as a MTP will never get the Upgrade button to work.
Very simple problem. Yes. But how do you get it to install as creative zen touch WPD. You will have to do alot of things to your computer and then luckily it will load as a WPD.
I am asking the creative team to modify the Upgrade installer to recognize the new MTP for the Upgrade installer the simplest solution. Alittile GIU programming guys.
I await the the new Upgrade installer.
PS The whole purpose for the upgrade is to be in MTP mode. Once it reboots the first time the upgrade installer should recognize the player as a MTP no matter what! Then we could hit the upgrade buton to install the firmware 2..0.
Hellloooooo

Creative zen touch Major prob

<FONT color=#0033ff size=4>I tried allof this ----->Creative Zen Firewire / USB 2.0 / Zen NX / Zen Xtra / Zen Touch
Ensure that the Jukebox Zen is turned off. Hold down the Play/Pause button and insert a paper clip into the Reset hole on the Jukebox Zen. Remove the paper clip from the Reset hole. The Jukebox Zen will enter the Recovery (Rescue) Mode (release the play/pause button) and the following options will be displayed:
).Clean Up (Performs a disk scan on the players harddisk)
2).Format All (Formats the players harddisk - <B>Note:</B> all contents will be lost)
3).Reload OS (Reloads the Operating System on the Jukebox. <B>Note:</B> Reloading your OS, will not effect the contents of the files stored on your Jukebox Zen)
4).Reboot (Reboots the device).
and it did not work,
the problem happened when i was playing music, i then paused it and turned it off, and it froze on the ( shutting down ... ) screen
and cant get it from that, this happened with my zen extra lots of times, and my mates zen touch..........
i've spent 300 euro on this and this has happened before, so it be really good if you can help me?

<FONT color=#333300>it wont work any of the steps, i tried holding the pause/play button and then inserting a clip and it wont work
<FONT color=#333300>
<FONT color=#333300>just stays on the Shutting down ... screen
<FONT color=#333300>
<FONT color=#333300>i've had one of these before and it didn't work, im a jinx with electrical equipment , jk
<FONT color=#333300>
<FONT color=#333300>but with zen touch is the battery able to be lifted out? it says warranty void if i open something up, not sure which, so i haven't tried anything
<FONT color=#333300>could the re set switch be damaged?

Creative Zen Touch Firmware Upgrade version 1.01

Hi Everyone,
Just to make you aware, a new Zen Touch firmware has been posted on our site:
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenTouch_PCFW_L4__0_03.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENT-FWARE--L4
<DIV id=ShortDesc>This firmware upgrades your Creative Zen Touch player for improved functionality.
<DIV id=Fixes>
<EM>Fixes:</EM>
Improves player functionality when the Random and Next buttons are pressed.
Resets the Custom EQ settings when resetting your player's settings.
Improves the display order of the Touch Pad sensitivity settings.
Improves the continuous playback of WMA and MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition (Me)or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Touch installed</LI>
<EM>Note:</EM>
To install this firmware update, do the following:
Download the ZenTouch_PCFW_L4__0_03.exe file into your local hard disk.
Connect the player to your computer.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI></TD></TR></TBODY></TABLE>
Cat

'Thanks a million for the link, KokChoy-CL! You are now on my X-mas present list.
I have been using the .0.03 firmware, but recently I read http://forums.creative.com/t5/MP3-Players/Zen-Touch-Custom-EQ-Frequencies-Wrong/m-p/64205" and wanted to try out the .00.06 firmware. Comparing from memory and using custom EQ, lows and mids sound much more clear now while bass is a bit more on the light side.

001 Creative Zen Touch 4

I just bought a creative Zen touch 40 GB , and i'm moving- using nomad explore -some mp3 files from my Win XP computer to the MP3 player. and in the middle it gives me an error that something wrong happened.
then i tried to unplug the usb cable and plug it again, this makes it work, but the problem is that this error happenes alot .
can any one help?

Make sure you have the latest drivers, firmware and software from Nomadworld.com downloads.

Help with my Creative Zen Touch (20

Hi everybody, I bought my Creative ZEN (20Gb) Touch in October.
For the first month it worked very well, and I was glad I bought it instead of an iPod (I've never liked them).
Anyway three weeks ago the display froze on a playlist while I was listening to it (none of the buttons worked), so I let the battery run down and after a couple of days it recovered and restart working.
This happened to me again last week, so I let the battery run down and, after charging it, it worked.
On friday I connected it to the usb cable, so I could use NOMAD Explorer. When I connected it (the first time) it was turned off but it turned on. I turned it off, anyway. After connecting it, the Nomad Explorer didn't work as if I haven't connected the Zen Touch to the cable. So I tried a couple of times to connect and disconnect the cable from the Zen Touch, and after that the on/off button was illuminated like it was on charge or connected to the cable - but it wasn't flashing, it was just a permanent light.
So I decided to use the same method I used the first two times I had some problems - but the battery didn't run down! Or maybe it did, but the light is still there, and my mp3 doesn't work. Now it's been four days, and this is the third time I had a problem with my mp3 player - I've been owning it just for three months! What should I do for make it start working?
How can I reset it's And if I do, am I going to lose any of my files?

if it crashes theres a small hole on the same side as the volume put a pin in you should feel a click if done correctly. it should then start up. as for your nomad explorer problem you should still be able to access your player from "my computer" there should be your dri'ves, nomad explorer and creative zen touch try getting to it through "creative zen touch. if none of that works maybe try removing all the software and install it all again. maybe update there firmware. oh if you have firmware version 2 nomad wont work. i miss it too. dont lose faith i've had mine for over a year now and had (and still am having) just about every problem. hope that helps Sm: )er

A problem with a creative Zen Touch 20

My creative zen touch now almost always has the battery indicator that says that it is using outside power, even when it is completely disconnected from outside power. The only time that it sometimes does not have that as its battery indicator is when im charging it from the non-usb power adapter. Then it shows the normal charging icon. This is very irritating because i can never tell how much batter my Touch has left.

so i guess, no one can help me

Creative zen touch problem - mediasource says it's emp

i've had my creative zen touch for more than a year and a half and used it every day with it working fine. a couple of weeks ago mediasource loaded it as empty on my pc. however all my music is still on it and i can play directly from the player but not through my computer. i've tried opening the player through other programs but this doesn't work either. i've tried uninstalling and reinstalling all of the creative software that came on the cd with it (mediasource, nomad explorer etc.) but it hasn't worked. does anybody know why this is and how i can fix the problem it's a bit annoying because i can't put any new music on it. thanks very much in advance. jonny.

Hello Roknoch,
Welcome to Creative forums!
You might want to check on these threads:
Scroll Pads gone Bad
ZEN touch: Button on face not responding

Having Trouble with Creative Zen Touch 20G

Hey everybody. I bought me a 20G Creative Zen Touch (you know, the one where the scroll thing is in the middle of the player, vertically?). Anyway, i bought it a couple of weeks ago and it's pretty **bleep** cool. No problems with it.....until today. I was watering the lawn, listening to my music (no, it didn't get wet), when all of a sudden it stopped working all together. Well, at first i saw some "Voice Recording" thing i had never seen before and no matter what i pushed, nothing happened. I couldn't even turn it off. I tapped it on the side, then it began working again. I decided to shut it off and put it in my room. Later when i went back to it,it wouldn't turn back on at all!!! Even though it's battery was charged, i decided to plug it into the charger where, once i plugged it in, i got a screen that said:
<EM>"CREATIVE ZEN</EM>
<EM>Copyright (c) 2004</EM>
<EM>Creative Technology Ltd.</EM>
<EM>All Rights Reserved"</EM>
And thats how it is currently: Nothing at all happens when it's disconnected from the charger and i try to turn it on. When connected to the charger, i get said screen, but thats it. No music, not even the blue backlight or the blue blinking light on the power button indicating that it's charging. :smileyindifferent:
Can someone tell me what's going on/how to fix this? We have been getting unbelievably hot weather here in So. Cal and i have the feeling that the hot temperature may have something to do with this. I've tried keeping the player in the coolest place in the house (besides the freezer) which would be near a fan so it could be in a cooler place, but even leaving it in such place for a couple hours isn't helping me.

Hey buddy
same problem with me. The zen got little moist due to rain, after that it froze at the 'Creative screen' that too comes on when i connect it to charger. I disconnected the battery, it worked for a while but it is back to same position now. It dosent responds to resetting pin... nothing happens it is dead. Only when i disconnect battey and connect charger ... give it a big whack it works for a while then hangs again.
Still trying my stuff on it. Otherwise i will format it and reload the firmware later on.
if u get any solution let me know on [email][email protected]][email protected][/url]
thankx

Creative Zen Touch stuck in Recovery M

Bear with me please since my english is not the best, but I'll try to explain my problem as good as I can.
Both me and my girlfriend have Creative Zen Touch mp3-players, and yesterday we were gonna update the firmware on both of them. We went to the Creative support page download-section and downloaded the latest one. When we were gonan install it it gave us the message that all data would be removed and that was fine with us since we already had plans about removing most of the music and replace it with new tunes. But when we were installing the firware it statrted out just fine but then when it said "Player is being rebooted, please wait..." (or something like that) it just was like that for a long time. After 20 minutes my patience ran out and I unplugged my device and tried with my girldfriends instead. Same thing happened with hers so now both our players are stuck in recovery mode with no firmware what so ever in them. I tried installing the firmware once again on both of them but now it can't the firmware just says my device isn't plugged in even though it is and my computer finds it as soon as I plug it in.
I contacted support and they told me to uninstall everything that has to do with the player and also remove Windows Media Player and all of its components. The reinstall the drivers and restart my computer. Then I should wait until my device told me to updtae the firmware to press the language selection on the firmware update. I did all of this but the firmware upadate still says my player isn't connected. This happens with my girldfriends player too, so it can't be any defect on the device.
So right now we're sitting on two mp3 players that are useless since they are stuck in recovery mode with no firmware. Please help me if you can and please keep in mind to not use too difficult english words. Thanks in advance!
Worth mentioning is that I've tried both the old and new firmware updates just to get it going and no one worked.
LukinMessage Edited by Lukinx on 07-7-200706:0 AM

Can't believe no ones answered this, check this thread ttp://forums.creative.com/showthread.php?=94247 then look for Rich's post in the thread, check his link for more info.
Basically uninstall wmp, and it's run time and reboot
Be using XP
try to install creatives latest plays for sure software suite (it will fail)
Don't unplug the player just reboot
Player should be found, ignore all messages of any kind
Go to FW update and double click it
Hopefully breathe a happy sigh of relief.
Creative you really are a bunch of toerags
Message Edited by Del369 on 07-7-200702:23 PM

The Creative Zen Touch Movement: Active Creative Us

Who out there wants a skin for their Creative Zen Touch? Who is tired of the monopoly that Vaja cases has and forces you to buy their horrific case for 70 Big Ones? Who is tired of the Creative Case that is included and is extremely bulky and doesnt even have a screen to see what you are doing? Are you not tired of having to take the Zen Touch of the cases everytime you want to do something? Are you tired of users that have Iri'ver and Apple's Ipod having infinite accessory choices while you are limited to 2 case choices? If your answers to these questions were yes, this is the new movement for you. This movement will bombard companies like Iskin and xSkin with emails asking them to provide a Creative Zen touch alternati've for cases that are protecti've, photogenic, and sleek. This method works because Iskin and xskin want to make $$$ and with more emails they know they will make more money. My Ipod counterparts show off their Ipods and protecti've them with the xskin exo3 which is only 0.7mm thick, and cannot defend my creative zen touch because I have a bulky case that makes it 3 times as big. With a skin, my creative will be protected from scratchs, perfect for style points, and i dont have to take it out of a case everytime I want to change anything. This movement worked on the Iri'ver site where they overloaded the system with emails for Iri'ver skin requests, and 3 months later, Iskin rolls out a skin for the Iri'ver. We can do the same. I encourage you to assist me in this movement so we can bring the Creative Zen Touch to the top of all mp3 players trampling the Ipod and Iri'ver alltogether. Now whos with me? Its time for action because we are the Acti've Creative Zen Touch Users
We are sending emails to these sites
http://www.iskin.com/store/I2feedback.tpl
On this site fill in your name and email and then paste this message (below) into the comment zone:
The Creative Zen Touch Skin Movement
This is the Creative Movement brought to you by Creative Zen Touch users. We have had enough with the horrible cases that are offered to us as choices. We are look to towards you for salvation. We kindly ask that you create a skin for the Creative Zen Touch, our forums are overloaded with request. The market for a skin for the Zen Touch has great potential to grow and we offer you as our first choice to do so. We are tired of the Ipod and Iri'ver users who can show off their sleek mp3 player complimented by a sleek skin and a screen protector. We wish we can do the same. We want to level the playing field for all mp3 players and we are asking you to do so. I have talked to over 80,000 creative zen touch users via the Creative Forum and they are all urging for a skin and are willing to buy it. That is a great potential market you have in front of you. Thank you for your deep consideration. This movement is lead by Creative user dmai7.
- Your Concerned and Ambitious Customer

actually about the skin thing
if u wanna change the skin of your touch you ll have to brake the warranty patch that is over a screw and with it end your warranty time.
for stuff that sticks over the case its alright
and yes there should be more accessories to this thing
have fun

Creative Zen Touch USB M

Similar Messages

Maybe you are looking for