Creative zen v plus and the belkin char
We discovered something that maybe is so obvious to everyone else but maybe not... we bought the belkin charger that works with our zen v plus. HOWEVER please note the usb cables that come with it and then with the zen v plus are NOT interchangeable. We at first assumed the only difference was the belkin cord was longer but the shorter cable that came with our zen v plus does NOT work with the wall charger. It made our zen lights blink on and off and go wierd and not charge at all but thankfully did not damage our player WHEW!
If the purchases you are talking about are DRM-protected files, which is mostly what the iTunes Store sells, they are not compatible with players other than iPod.
All you can do with them is use iTunes to burn them to an *audio CD.* Think how handy it would be to have them on an *audio CD.*
Going forward, do not spend your hard earned money on songs with proprietary DRM protection. There are other online stores, such as amazon.com, that sell the same songs in non-DRM format, which will be compatible with iPod, Zen, or virtually any other player.
Similar Messages
-
Creative Zen V Plus and libmtp
First off, for some reason whenever I plug my creative zen in, my laptop assumes this is some sort of photo device. In additino to that, Amarok won't recognize it.
When I did mtp-detect:
Listing raw device(s)
Found 1 device(s):
Creative: ZEN V Plus (041e:4152) @ bus 0, dev 15
Attempting to connect device(s)
usb_claim_interface(): Device or resource busy
LIBMTP PANIC: Unable to initialize device
Unable to open raw device 0
OK.
Should I be concerned about the LIBMTP PANICE?hokasch wrote:However, I have still not found a linux app that transfers album art. Does Banshee copy the album covers? Or does anyone know about another tool? I read amarok1 schould be capable of this, but I can not get it to recognize the zen.
Amarok1 can definitely do this and I think it's probably got the best interface for copying tracks to the player - I only keep amarok1 installed purely for transferring tracks to my player!
danielsoft wrote:wait, does that mean that this player cannot be connected as a generic USB storage device?
My Vision:M can partition part of the harddrive that will mount as a storage device, but that's only for files. Audio and Video is transferred only through MTP which is a pain in the wotsits. I'm not sure about all creative players, but I think the majority are MTP. -
Problems running creative zen nano plus and nomad muvo on same compu
We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.<FONT face=Helv size=2>
Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
Here is what you should do to get the latest MediaSource software:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
- (Depending on your firmware)
Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
or:
Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
- Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
- Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site. -
Is it just me or does my Zen work with Vista on a desktop but not a laptop?
If the purchases you are talking about are DRM-protected files, which is mostly what the iTunes Store sells, they are not compatible with players other than iPod.
All you can do with them is use iTunes to burn them to an *audio CD.* Think how handy it would be to have them on an *audio CD.*
Going forward, do not spend your hard earned money on songs with proprietary DRM protection. There are other online stores, such as amazon.com, that sell the same songs in non-DRM format, which will be compatible with iPod, Zen, or virtually any other player. -
Creative Zen V Plus Dead after char
I put my Creative Zen V Plus and charged it on my laptop. I forgot my laptop has a standby option after 30 minutes and I put it in, went to sleep... woke up 6hours later, and my mp3 player was dead. I tried turning in on by holding the button for extended periods of time, I tried plugging it in?my desktop computer which had the drivers also.... I've tried reseting it.. but nothing works. Is there anything left to do or should I send back?
The player battery might be depleted so connect it to the computer and charge it for a longer period of time. Also, while connected, try pressing the Reset button/hole by the side of the player.
Jason -
Creative Zen Nano Plus..cords..warnin
Hello. i just got a Creative Zen Nano Plus and while I was going through the manual that came with it I noticed there was a warning about the cord(s): "WARINING: The cord(s) included with this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproducti've harm. Wash hands after handling. " I'm wondering if Creative has changed the components of these cords. And if so can they be replaced somehow. I don't want to use a cord that may cause cancer or birth defects.
From a previous thread on this:
California law states that notification should be given if a product contains certain amounts of lead. Many types of electrical cords use small amounts of lead to make them more flexible and the USB cord used with many of our products is no different.
I believe a more official source of information regarding the Lead disclaimer, it's origin and purpose, can be found here: http://www.oehha.ca.gov/prop65.html
Cat -
I´ve bought a creative zen nano plus and couldn´t make it work on my Mac. Does anyone knows if there is any restrictions for creative mp3 players to install on Macs? There´s anything I can do?
ThanksWelcome To Discussions marianamansur!
As per this page ZEN Nano Plus - 1GB MP3 flash player stores 500 songs and comes available in 10 colors, these are the software requirements.
"Microsoft® Windows® 98SE®/2000/Me/XP (Service Pack 1 or higher)"
ali b -
Creative Zen V Plus - Seeking your help with "Audio format is not supported" error
Hi,
I have a problem with my Creative Zen V Plus and am looking for someone to do a quick test to help me. I listen to a lot of MP3 podcasts, so I often rewind, fast forward or set bookmarks inside tracks. When I do those operations in some tracks, I get the error ?Audio format is not supported? when I ?land on certain places in a track (and I am able to reproduce the problem, which happens always at the same place in a particular track).
Here is what I mean by ?land?. For instance, there is a particular track (see the mp3 link below) that whenever I rewind to exactly 35 min 37 seconds, I get the error ?Audio format is not supported? and playback is stopped. If I fast forward to exactly 35 min 37 seconds, I also get the error. If I set a bookmark to exactly 35 min 37 seconds and I then go to that bookmark, I also get the error. But I don?t get the error if I play the track normally without any rewinding or fast forwarding: the track is played and passes the 35 min 37 seconds mark without any error.
Creative Labs customer support wants me to return my player for repair, but I am not sure if the problem is with my player or if the problem would also be present on other Zen V Plus, thus my asking for your help.
I would appreciate if someone of you could try one of my problematic tracks on their player. Here is what you could do to help me:
1- Download and transfer to your Zen V Plus player the following audio file (it'ss a technology podcast and don?t worry, it'ss virus-free, it comes from CNET):
http://podcast-files.cnet.com/podcas...oud_090808.mp3
2- Go to the 35 min and 37 seconds mark, press PAUSE and set a bookmark there.
3- Go into the Bookmarks menu and go to the bookmark you just set.
4- Do you see the error ?Audio format is not supported?, or the audio plays just fine? If the audio plays just fine, could you tell me what are the first words you hear
when going to that bookmark, just so that I am sure we are indeed doing the same test on each of our side?
5- What firmware version is your player at ?
Thank you very much for any help you could bring me.
Patricknever mind. figured it out!
-
I have a question about creative zen v plus regarding vi
i just bought a creative zen v plus and i have windows vista ultimate and when i hook up the zen v plus the computer doesnt recognize that its connected and it says no device is connected even though it is is this because i have windows vista or is it another reason plz help?
ps.
as u can see im new to this board?if you havent used the cd do so.you need it installed for it to recognise the player and even just to charge it via usb
-
Creative Zen Stone Plus 2GB vs. Zen V plus
Hi. I recently had my Zen Micro just freeze and die after 8 months. I lost ,600 songs. I am now interested in purchasing a flash mp3 for working out and commuting. I've heard good things aobut the Zen Stone Plus and the Zen V plus. Can anybody give me any adivice on deciding between the two? Thanks!
There's a site http://www.smartratings.com/review/e...mp3_players/35 where a compilation of expert reviews for Creative ZEN V Plus 2GB MP3 Player can be found. You will see that it received quite a good ratings from some of the experts who tested it. And lastly, the reviews are conveniently located because you can accessed them from one place.
-
The New Creative Zen Stone plus with built-in spea
?i was thinking of buying the the New Creative Zen Stone plus 2GB?with built-in speaker. http://creative.com/products/mp3/zenstoneplus/?The product detail info claim a 20 hours battery life of this product. . is?this a?true claim ?2. is there any problem about the charging process of this product?because the "previous" Creative?Stone Plus has a charging and?battery life problem. 3. Or should i just settle for the Creative muVo v00 2 GB instead ?Any thoughts guys?Thanks
xmouse,
Here you go:
Firmware for Zen Stone Plus w/ Speaker
You can find any other files you need by going to "Support" and then "Downloads" on this website.
Good luck,
Dale -
Zen Nano Plus and N200- the sa
Yesterday I ordered a N200... or a Nano Plus, actually i don't know since the title said Zen Nano Plus, but the pictures and text said N200. Of course I asked support which I was going to get when I ordered and in their reply they said they are the same but with different name... so I don't really know what i'll get tomorrow, but then I guess it won't matter if they are the same with different name... But are they really the same?
Hello,
Just so you don't make a mistake, the 200 and the Zen Nano Plus were different for me. Both I bought were GB but the software was different on the N-200. I was told NOT to load the N-200 on the Zen Nano Plus. I also bought Notmad software and they said that the ZenNanoPlus would be supported soon.
I mistakenly thought I had to upgrade the firmware to get Audible compatibility. I did not. It was Audible ready out of the box. It was .00.02 from the factory. I got 2 different Creative support people telling me 2 different things...including how to upgrade the firmware with N200. One support said DO NOT do it.
Finally I got someone who said it was audible ready as it is. I tried it and it worked perfectly. So...just check. I am not sure who was right. All I know is I blew one up once trying to upgrade and I am real cautious now. At this time, I would not trade the Zen Nano Plus for anything......except perhaps for a copy of the new firmware for the Zen Touch ! Had to get that in. -
I just bought the V plus and the charger was unavailable to be bought at the store. I have a Zen Microphoto wall charger and i was wondering if i could use that to charge my V plus. I was afraid to try just in case it got messed up.
The player battery might be depleted so connect it to the computer and charge it for a longer period of time. Also, while connected, try pressing the Reset button/hole by the side of the player.
Jason -
Creative Zen Nano Plus Media Explorer only works for administra
Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AMRMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB -
Creative Zen V PLUS firmware fail
Creative Zen V Plus
S/No. C6PF2072634R02752T
DAP-FL0040
I have experinced, some problem during applying newest firmware. I haVe downloaded all new updates. Then I started Creative ZEN V Plus Firmware .0.03__ and ther was a problem.. On my player`s screen was displayed updating firmware. And there was displaying for a couple hour. But. At the end of applying of firmware. The message was updatinf firmware failure. Then I repeated for several times. And Againg was the same message.
Then I detached player from my PC. And from that time my player is not responding..
I tried to do this again. But my player is not functioning welll. When I tur it On the display is showing just Creative logo, and then it is (self) turned off.
Now player cant be recognised by computer. But when I connect my Zen V Plus, it is recognised as STMP3600 device , and is trying to install new driver.
Can you Help me.
I bought my Creative Zen V Plus in miami I September this year. I`m Living in Serbia. Europe.
Sincerely yours,
Dejan Djordjevic
P.S. I`v tried to reset player, and to reset frimware according to your instruction in your Knowledge database. But can`t help me.Yes I've got a TEAC MP-244 and I wanted to upgrade the firmware.
Tghe tool that was sent me by a TEAC support member worked; but it made my player to be a "STMP3600" and Windows XP wanted to have a driver.
I looked into the folder but the files there were corrupt.
The I downloaded the older firmware from the TEAC support website and - god thanks - the files in this packed folder worked. That means that the STMP3600 was recognized and a new device - in German: Player-Wiederherstellungskonsole (Englisgh sthg. like that: Device to recover the player?) - was created. Then I could upgrade the firmware successfully.
Maybe that's a help for you all guys.
Kinds gegards,
Marcel S.
PS: Excuse my bad English. ;-)
Maybe you are looking for
-
I was exploring my new iMac, trying to see similarities and differences between it an "ibm" based computers, and somehow I ended up with an icon of my hard drive on my monitor. I tried dragging the icon to the trash can, but it can't seem to be delet
-
Converting Word 2007 to PDF problem
I have Word 2007 and Adobe Acrobat 9. When I try to save my word file to PDF the PDF font looks distorted throuhout the document. I'm using standard fonts and I have done this many times before without a problem. This just started today.
-
How to make smal areas in a map clickalbe and adjustable for Flash..
I am trying to make a clickable map where you can click on small areas and be linked to another page.... I can of course break the map to 100 pieces and make 100 buttons and put them together... But this is so time consuming and I am sure there is a
-
Best Way to Create Generic PL/SQL XML Parser
I have an application that stores xml documents in a table. For each product sold in the system, a different XML document can exist for custom data about that product. The schemas are stored in another table and not with the xml document. I am lookin
-
Hi, Sometimes the load request for an xml fails(timeout maybe) and a message "unable to load data" is displayed in the flash player on the mobile phone, how could I catch this exception to manage the error/exception instead the message was shown??? I